Change-Id: I70fbd41ac386d7ea9a7fa0abb540151727461ac1

This never use - because -
out->sample_rate and out->config configured in adev_open_output_stream
out->config = can have deep or no pcm config with only 48000 sample rate.

Change-Id: Ie1c4025585ab6e1b7a900486181c1bceeff88139

Change-Id: Ifdd8eb45dea17eb2a4c5b3a0377d7b7492a888f3
Signed-off-by: Stricted <info@stricted.net>

Change-Id: Ief1ad87e47a7a2d56dbed80484c009d2ad7f1a2a

Change-Id: I7118446dae352f7ed8079c37e0b58961994c14f4

Some new S7 devices are sold with cc:c0:79 MAC Address.
Adding this address in file macaddr_mappings.h is required in order to load proper drivers.
Without it, the WiFi does not work properly : signal is weak

Change-Id: I9845f8739cf3e5a4caea9eeb989576877d088731
(cherry picked from commit f66c95bcae5f4a0453b5c5f035f02e476145667b)

Change-Id: Ic2d979b5db335a695492ed0cc3e0f08013f9d8d0

This allows us to distinguish not only by platform and subtype at build
time, but also by device-specific model.

It is required because two devices may share the same kernel sources and
thus build the same dtbs, but the resulting dt.img should be devie
specific and only contain the specific dtbs for that device.
Otherwise we are likely to violate dt.img size constraints by including
too many dtbs (which is the case for a5y17lte and a7y17lte right now).

For now, the feature will be optional (existing samsung_dtbh.h headers
don't have to be changed) but that might change in the future.

Change-Id: I2d804f9f1a14051e60f4de4f3d2d4f11c9b3c23f

Change-Id: Icfdc5fae064f66bfcaf061bff0d0d1e5554f126d

Change-Id: I59dabea4484dd1f1e5c57ae2ac37b9939d2c875d
(cherry picked from commit d0e208008ccc1385c0ca61fe0bd40e7f92fcb9e8)

Change-Id: I0913447dca830307d41286499ed69cd3e1e197c4

Change-Id: Idc62dba34bdbe82a70e3b0e53755348a48659334

* CIS table says 33 33, which is semco not semco3rd

Change-Id: I944df6b13a8c1294ef47016d15f13f79c5ed5f7d

Change-Id: I3fe824c4dbdb57bb0d63b395cfcef2f9dbbe556b
Signed-off-by: Abhay Ruparel <abhayruparel2000@gmail.com>

Change-Id: Ibabe4c5fc3b23cd5a0e33fc90b76db93a72099a6

Change-Id: Id6150885203a64733bffeb7ce6dc4e91fab305df

New herolte OUI observed: 1c:70:22
Checked on hwaddress.com

Change-Id: I4a2c15e315b46af81f815114cf85f0d1cced87f3
(cherry picked from commit ba6c738c2f39fc1011ae5f61067f84b1bf430111)

Change-Id: I688f42059459c400834cac0b4c8933ef216827a5

Users found this on few herolte/hero2lte revisions

Change-Id: I2cda3a3b39c951c1215622ae1b55483fbbfc94a8

* Sometimes, the modem is sending 1-2 extra fields with
  the country mcc, which confuses ServiceStateTracker
* Drop the extra data here, instead of in our RIL class

[haggertk]: Forward port to ril-caf on lineage-15.

Change-Id: Ifbec67bb0dac271226bd8b5471deaf6a2ef33f2b

[javelinanddart]: Forward port to ril-caf on lineage-15.1

Change-Id: Ifeeee11ee83deddb8eff565847641c45a105378f

Current get_pcm_device return always first finded pcm_profile.
And out->pcm_dev_list always have only pcm_device_playback pcm_profiles.

But if we need use deep_buffer pcm device
we need use deep_bufer pcm_config - current hal
don't did this...

And we configure out->config in adev_open_output_stream
function with proper pcm_config (deep or no).

Change-Id: I86fdb18202afb0e83393f32830d57c929f174ae6
(cherry picked from commit 39d1d019965d04ddfad2c643de53cd5501803aa4)

Change-Id: Ie21f94e80a18f5a5805a3ee00e12e83fa2fc3f1a
(cherry picked from commit 35dbc1e39fa7d355edbebe0071145aac45cc1075)

Android expects a FINGERPRINT_ERROR_CANCELED error-message if a
fingerprint authentication-requested was cancelled.

As bauth doesn't deliver such a message on its own, we use the
already notify-wrapper to send a message to Android if the
authentication was cancelled by bauth to allow a proper operation
of the fingerprint-service.

Some devices (hero, hero2) with the fingerprint scanner embedded in
the home button need this for the "config_fingerprintWakeAndUnlock"
option to work reliably.

Change-Id: Id5ec866a7608885925687a1927e0e6085e9b6cff
Ref: BUGBASH-1422

Change-Id: I32ec0c5651395c7af3dc4b80d25204bf0fcc1977

* Moved from device/qcom/common

Change-Id: I9b301923aaebdbfbc8599e0f8524b2a38fe6cefa

We don't need to handle the mixer updates here anymore.

Change-Id: Id60759e31a6501e4772bbd7377505197c932545a

Change-Id: I35fbcc03e9666e579134512b443610e546c31441

* Checking numInts and numStrings for strict equality when
  we're not looping is dumb, because Samsung is notorious
  for sending extra information in their RIL
* Check if there's *enough* data rather than the *exact amount*
  to fix a bunch of invalid response errors

Change-Id: I14bc37240e5760b4629fcb74b64f25ad95d4fdfc

Before:
    if (response == NULL || numStrings != 3) {
After:
    if (response == NULL || numStrings != mqanelements - 2) {

This patch fixes the logic so we don't change the value check.

"mqanelements" is not related to getOperatorResponse, so get get rid of
the affected code.

Change-Id: I86c6ae7b7492a5d04fbc8dc415c4f615e7d05bab

Change-Id: Id93d7941ae322a83488da3cea62c6eb36a6e9160

Remove the unused len var while we're at it.

Change-Id: Iabaf3b8704072a8758b213a54530eaffbf0c7ae5

This is needed for Samsung devices like the Galaxy A5 2017.

Change-Id: I3b89cf8ac232fef5629b439dbf5d2f21bdb264a2

This is needed for Samsung devices like the Galaxy A5 2017.

Change-Id: I549130b838377d8a8668ac59b51c314fe9e7f5ab

* Samsung now supports many more modes than just inverted colors
* Add strings for these extra modes while we're at it

Change-Id: If2a469c994658d521d98b91adec1a19badb8092f

* BROWSER_APP
* eBOOK_APP
* EMAIL_APP
* TDMB_APP

Change-Id: I44be4d46f7a077295f0631a71ec652e61c3f9411

* It just so happens that not all devices will have the
  same options available, so allow them to specify what
  they have without breaking tranlations by moving the
  scenario names into individual strings from the arrays
* Update a few strings to be actually translatable
* Fix an off-by-one error for every display mode after
  "LineageOS (default)": UI is the same thing as the
  default mode, so remove it to make the mode selection
  actually choose the user-selected mode

Change-Id: Id5d659d79c10ea097c35b7416ef7c1cc93937756

Change-Id: I519122aaa77e73cf0290610a3d9d4aa79700e843

Change-Id: Ifa2a55cbfe45ab9d53cd23098012443f9b32ca31

Change-Id: I131ed6518ce8f26638a3490ee1be7a5d93b4e5b8
(cherry picked from commit 0524e26d)