DOWNSTREAM commit '42e05c9a' AU313 08/26

* commit '42e05c9a':
  power: smb5-lib: Set parallel charger configuration is uUSB removal path
  clk: qcom: Add display clock controller driver for SDMMAGPIE
  ARM: dts: msm: move devfreq nodes inside soc node for sm6150
  ARM: dts: msm: Enable QoS programming for SM6150
  ARM: dts: msm: Correct the ports of funnel_monaq_1 for SM6150
  ARM: dts: msm: Update NPU CC clock node for SDMMAGPIE
  clk: qcom: Add support for NPUCC driver
  ARM: dts: Add 895MHz GPU clock support for SM6150
  msm: kgsl: Add support of GPU speed bin for A608 GPU
  ARM: dts: msm: Correct the port of turing funnel for SM6150
  ARM: dts: msm: Add SMMU SID for SM6150
  ARM: dts: msm: restrict the lut access to 160 bytes
  ARM: dts: msm: set active display property for various sm6150 platforms
  msm: ipa3: Disable checksum offload on LAN PROD pipe
  regmap: Add kconfig flag for wcd regmap
  USB: core: Add USB_DEVICE_ERROR uevent for enumeration timeout
  qcom: smb1355: support usbin-usbin parallel configuration
  smb1355: Use comparator for die temperature
  mm: fix the use of ALLOC_CMA
  zram: allow zram to allocate CMA pages
  msm: sps: Correct markings year format
  defconfig: add Himax and Synaptics touch driver for SM6150
  power: smb5: Add DC power supply support to PM6150
  coresight: byte-cntr: Read 64bit rwp
  clk: qcom: update dsi 14nm PLL clock names
  ARM: dts: msm: Enable TZ-log driver for SM6150
  ARM: dts: msm: Add crypto devices for sm6150
  ARM: dts: msm: Add Qseecom node and Qrng node for sm6150
  tty: serial: msm_geni_serial : Change AB voting for console used SE
  clk: qcom: gcc: Add a fixed factor clock for SDMMAGPIE
  ARM: dts: qcom: Update QUPv3 core master bus id for SM6150
  ARM: dts: qcom: Update QUP_1 master id for SM6150
  power: smb5-lib: exclusive typec mode operation
  ARM: dts: msm: Enable sdhc1 and sdhc2 for QRD SM6150 SoD
  sound: usb: Add QMI bye callback
  msm: kgsl: Place GMU in reset before entering slumber
  backlight: qcom-spmi-wled: Change the default FSC for WLED5 to 25 mA
  iommu: arm-smmu: Remove unnecessary power_on call
  ARM: dts: msm: add smp2p and smmu ipa support for sm6150
  mhi: core: update MHI host support for WLAN FW execution environment
  ARM: dts: msm: Enable dload_type selection on SM6150
  coresight: tmc: Clear CacheCtrlBit2 and CacheCtrlBit3
  soc: qcom: Update QMI response max buffer length
  input: touchscreen: hxchipset: set rst pin to low during suspend
  ARM: dts: msm: add Himax Touch panel support for QRD6150
  ARM: dts: msm: Modify the DP PHY power for QRD SM8150 DVT
  msm: vidc: skip cache operations for secure session
  msm: ipa: handle modem ssr in imp
  msm: vidc: Limit the max secure instances to 3
  defconfig: Disable panic when EDAC encounters single bit errors
  sched: Improve the scheduler
  timers: Clear timer_base::must_forward_clk with timer_base::lock held
  sched: Improve the scheduler
  defconfig: arm64: Enable USB Electrical and Link test support on sm8150
  msm: vidc: Use correct flag to propagate data corruption
  debugfs: defer debugfs_fsdata allocation to first usage
  defconfig: msmsteppe: Enable VTI config for v4 and v6
  ARM: dts: msm: Fix label names for sm6150 wcd
  ARM: dts: msm: Add display panel support for QRD SM6150
  adsprpc: Initialize VA of fastrpc dynamic heap buffer to Zero
  sdmsteppe: defconfig: Enable CONFIG_NETFILTER_XT_MATCH_BPF
  power: qpnp-qg: Update the property to force-recharge
  msm: gsi: Update GSI 2.5 registers offset
  power: qpnp-smb5: Add FORCE_RECHARGE power-supply property
  msm: ipa: Enable GSI Register interface version 2
  msm: gsi: Support GSI register version 2
  qseecom: expose a new IOCTL for new FDE design
  crypto: ice: Add support for new FDE design
  drivers: phy: ufs: Use correct UFS PHY version suffix for sm6150
  ARM : dts: msm: Update UFS Unipro clock frequency for sm6150
  icnss: Remove WARN_ON during self recovery trigger
  ARM: dts: msm: Add SMMU support on QDSS for SM8150 v2
  coresight: tmc: Add USB BAM SMMU support
  debugfs: call debugfs_real_fops() only after debugfs_file_get()
  debugfs: purge obsolete SRCU based removal protection
  trace: convert to debugfs_file_get() and -put()
  defconfig: msm: Enable PCA9956B LED Driver on QCS405
  mhi: core: add multi-EE support for MHI channels
  defconfig: msm: Update display configs for sa8155
  defconfig: msm: Disable config EXT2_FS and EXT3_FS for sa8155
  ARM: dts: msm: update iommu info of npu node for sm8150 v2
  power: qpnp-fg-gen4: Fix ESR timer initialization
  defconfig: Disable DEVPORT on sm8150
  arm: dts: msm: Update USB QMP DP PHY settings for sm8150 v2
  pinctrl: sm6150: fix SDC and UFS reset pin groups offsets
  ARM: dts: msm: update UFS regulator for SA8155 V2
  ARM: dts: msm: Add support for SA8155 V2
  msm: kgsl: Enable IFPC on A640 v2
  sched/fair: Do load balancing of misfit task only when dst_cpu is idle
  IB/hfi1: convert to debugfs_file_get() and -put()
  debugfs: convert to debugfs_file_get() and -put()
  debugfs: debugfs_real_fops(): drop __must_hold sparse annotation
  debugfs: implement per-file removal protection
  debugfs: add support for more elaborate ->d_fsdata
  ARM: dts: msm: Update the max voltage of the SMPSC2 for SM6150
  ARM: dts: msm: Correct the spmi core size for SM6150
  ARM: dts: msm: Update sm7150 DT entires for fastrpc usecases
  ARM: dts: msm: fix phy parameters for hx83112a panel on sm6150
  ARM: dts: msm: Enable the OSM clock controller for sm6150
  msm: vidc: EOS not reached for specific AV content
  usb: dwc3: Use pwr_event_irq to wakeup if there is no ss_phy_irq
  usb: dwc3: Start the core in host mode only if there is no extcon
  i2c-qcom-geni: Set DMA mask to support 64 bit DMA
  defconfig: msm: enable dvb demux modules compilation
  Migrate mpq demux driver from kernel 4.9 to 4.14
  RM: dts: msm: add TSPP node for kernel 4.14
  Migrate mpq demux and TSPP driver from kernel 4.9 to 4.14
  ARM: dts: msm: Support PCA9956B LED on QCS405
  leds: PCA9955B: 24-channel constant current LED driver
  mmc: cmdq: Notify higher layer of ice errors
  mmc: card: Service RPMB requests with priority over other requests
  ARM: dts: msm: add rmnet_ipa node for sdxprairie
  msm: ipa: Setting appropriate config on MHI ep
  msm: ipa: Enable RMNET_IPA3 compilation for sdxprairie
  ARM: dts: msm: Add swr port mapping for sm6150
  ARM: dts: msm: Add scandump sizes for SM6150 CPUs
  clk: qcom: Update mdss_ahb_clk clock divider for SM6150
  ARM: dts: msm: Enable remotefs for SM6150
  ARM: dts: msm: Add rtb node for rtb dump enablement
  Documentation: sound: Add documentation for swr port mapping in wcd937x
  clk: qcom: Mark video_cc_xo_clk as CRITICAL
  coresight: tmc: Fix write point for ETR sg mode
  defconfig: qcs405: Enable Power driver for BT
  msm: sps: Allow for different IOVAs for buffers in BAM-to-BAM mode
  kasan: add no_sanitize attribute for clang builds
  power: smb5-lib: Modify max USBIN voltage seen by userspace
  net: qrtr: mhi: Create list for pending ul transfers
  diag: Enable diag over rpmsg communication
  mhi: core: expose current state of MHI device to clients
  msm: ipa: Validate routing rule id
  ARM: dts: msm: Update GENI_IR node for QCS405
  mm: cma: retry only on EBUSY
  drm/msm/dp: return number of displays as 0 if dp node is disabled
  msm: kgsl: Hold GMU in reset during initialization
  msm: kgsl: Define all the GMU VA space
  drm/msm/dp: Implement dynamic slot adjustment for mst
  msm/sde/rotator: reduce log level of sde_rotator_footswitch_ctrl
  mm: fix cma accounting in zone_watermark_ok
  Revert "lowmemorykiller: fix cma accounting"
  wil6210: off channel transmit management frames in AP mode
  wil6210: align to latest auto generated wmi.h
  wil6210: increase firmware ready timeout
  wil6210: allow scan on AP interface
  wil6210: add support for link statistics
  wil6210: align to latest auto generated wmi.h
  wil6210: fix temperature debugfs
  wil6210: add TX latency statistics
  drm/msm/sde: add property to select dpu smmu mapping based on hw version
  usb: gadget: gsi: Increase Rmnet UL buffer size from 16K to 31K
  Revert "msm: vidc: Remove QCOM keyword from buffer flag"
  arm64: Export caching APIs
  drm/msm/hdcp2.2: return proper error code on aux failures
  ARM: dts: msm: Add panel TE source information for SM8150
  drm/msm/sde: use vsync source information from interfaces
  drm/msm/dsi-staging: set default topology
  ARM: dts: msm: Disable NFC and camera on sm8150-sdx50m QRD platform
  msm: sde: add property to select rotator smmu mapping based on hw version
  ARM: dts: msm: Modify the panel max brightness level for QRD SM8150
  ARM: dts: msm: updating audio route for qcs405
  usb: f_gsi: Report Function Remote Wake capabilities
  soc: qcom: mem-offline: Fix klocwork errors
  mm: Increase number of GFP masks
  mm: add cma pcp list
  cma: redirect page allocation to CMA
  drm/msm/dsi-staging: fix mem leak issue in ESD debugfs
  drm/msm/dsi-staging: set correct flags for MAX_RETURN_PACKET command
  drm/msm/dsi-staging: Debugfs node for ULPS status
  sched: walt: Add BUG_ON() when wallclock goes backwards
  clk: qcom: Add support to round the frequency to kHz

Change-Id: Iefd667ee56baeb539502f7ec094c80c77dbe8696
Signed-off-by: Harsh Shah <harshs@codeaurora.org>