Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 7bba9f7b authored by Yuan Zhao's avatar Yuan Zhao Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: Add NT36850 panel support for HDK8150 



HDK8150 device uses this panel, so add the support.

Change-Id: Id644706cccc5a980b2116011050577437cfddcec
Signed-off-by: default avatarYuan Zhao <yzhao@codeaurora.org>
parent 92a2b707

arch/arm64/boot/dts/qcom/dsi-panel-nt36850-truly-dualmipi-wqhd-cmd.dtsi

0 → 100644
+87 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&mdss_mdp {

	dsi_dual_nt36850_truly_cmd: qcom,mdss_dsi_nt36850_truly_wqhd_cmd {

		qcom,mdss-dsi-panel-name =

			"Dual nt36850 cmd mode dsi truly panel without DSC";

		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-color-order = "rgb_swap_rgb";

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;



		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";

		qcom,mdss-dsi-lane-map = "lane_map_0123";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-tx-eot-append;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-lane-3-state;

		qcom,mdss-dsi-wr-mem-start = <0x2c>;

		qcom,mdss-dsi-wr-mem-continue = <0x3c>;

		qcom,mdss-dsi-te-pin-select = <1>;

		qcom,mdss-dsi-te-dcs-command = <1>;

		qcom,mdss-dsi-te-check-enable;

		qcom,mdss-dsi-te-using-te-pin;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-lp11-init;

		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";

		qcom,mdss-dsi-bl-min-level = <1>;

		qcom,mdss-dsi-bl-max-level = <4095>;

		qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 50>;

		qcom,mdss-dsi-display-timings {

			timing@0 {

				qcom,mdss-dsi-panel-framerate = <60>;

				qcom,mdss-dsi-panel-width = <720>;

				qcom,mdss-dsi-panel-height = <2560>;

				qcom,mdss-dsi-h-front-porch = <120>;

				qcom,mdss-dsi-h-back-porch = <140>;

				qcom,mdss-dsi-h-pulse-width = <20>;

				qcom,mdss-dsi-h-sync-skew = <0>;

				qcom,mdss-dsi-v-back-porch = <20>;

				qcom,mdss-dsi-v-front-porch = <8>;

				qcom,mdss-dsi-v-pulse-width = <4>;

				qcom,mdss-dsi-h-left-border = <0>;

				qcom,mdss-dsi-h-right-border = <0>;

				qcom,mdss-dsi-v-top-border = <0>;

				qcom,mdss-dsi-v-bottom-border = <0>;

				qcom,mdss-dsi-on-command = [

					15 01 00 00 00 00 02 ff 10

					15 01 00 00 00 00 02 fb 01

					15 01 00 00 00 00 02 36 00

					15 01 00 00 00 00 02 35 00

					39 01 00 00 00 00 03 44 03 e8

					15 01 00 00 00 00 02 51 ff

					15 01 00 00 00 00 02 53 2c

					15 01 00 00 00 00 02 55 01

					05 01 00 00 0a 00 02 20 00

					15 01 00 00 00 00 02 bb 10

					05 01 00 00 78 00 02 11 00

					05 01 00 00 78 00 02 29 00

				];

				qcom,mdss-dsi-off-command = [

					05 01 00 00 78 00 02 28 00

					05 01 00 00 78 00 02 10 00

				];

				qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

				qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

				qcom,mdss-dsi-h-sync-pulse = <0>;

			};

		};

	};

};

arch/arm64/boot/dts/qcom/sm8150-sde-display.dtsi

+26 −1
Original line number Diff line number Diff line
@@ -30,6 +30,7 @@ 
#include "dsi-panel-sw43404-amoled-dsc-wqhd-cmd.dtsi"

#include "dsi-panel-sw43404-amoled-dsc-wqhd-video.dtsi"

#include "dsi-panel-sw43404-amoled-dsc-fhd-plus-cmd.dtsi"

#include "dsi-panel-nt36850-truly-dualmipi-wqhd-cmd.dtsi"

#include <dt-bindings/clock/mdss-10nm-pll-clk.h>



&tlmm {
@@ -345,6 +346,17 @@ 
		qcom,dsi-panel = <&dsi_sw43404_amoled_fhd_plus_cmd>;

	};



	dsi_dual_nt36850_truly_cmd_display: qcom,dsi-display@19 {

		label = "dsi_dual_nt36850_truly_cmd_display";

		qcom,display-type = "primary";



		qcom,dsi-ctrl-num = <0 1>;

		qcom,dsi-phy-num = <0 1>;

		qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0";



		qcom,dsi-panel = <&dsi_dual_nt36850_truly_cmd>;

	};



	sde_dsi: qcom,dsi-display-primary {

		compatible = "qcom,dsi-display";

		label = "primary";
@@ -390,7 +402,8 @@ 
			&dsi_nt35695b_truly_fhd_cmd_display

			&dsi_nt35695b_truly_fhd_video_display

			&dsi_sw43404_amoled_video_display

			&dsi_sw43404_amoled_fhd_plus_cmd_display>;

			&dsi_sw43404_amoled_fhd_plus_cmd_display

			&dsi_dual_nt36850_truly_cmd_display>;

	};



	sde_dsi1: qcom,dsi-display-secondary {
@@ -799,3 +812,15 @@ 
		};

	};

};



&dsi_dual_nt36850_truly_cmd {

	qcom,mdss-dsi-display-timings {

		timing@0{

			qcom,mdss-dsi-panel-phy-timings = [00 1f 08 08 24 23 08

				08 05 03 04 00 1a 18];

			qcom,display-topology = <2 0 2>;

			qcom,default-topology-index = <0>;

		};

	};

};