Merge "Extend Telephony HIDL interface to include unsolicited RIL commands."... (ad36c620) · Commits · e / os / android_hardware_interfaces

radio/1.0/Android.mk

+1081 −27

File changed.

Preview size limit exceeded, changes collapsed.

radio/1.0/IRadioIndication.hal

+446 −2

Original line number	Diff line number	Diff line
		@@ -21,9 +21,453 @@ package android.hardware.radio@1.0;
		*/
		interface IRadioIndication {
		/*
		* Called when radio state changes.
		* Indicates when radio state changes.
		*
		* @param type Type of radio indication
		* @param radioState Current radio state
		*/
		oneway radioStateChanged(RadioState radioState);
		oneway radioStateChanged(RadioIndicationType type, RadioState radioState);

		/*
		* Indicates when call state has changed.
		* Callee must invoke IRadio.getCurrentCalls()
		* Must be invoked on, for example,
		* "RING", "BUSY", "NO CARRIER", and also call state
		* transitions (DIALING->ALERTING ALERTING->ACTIVE)
		*
		* Redundent or extraneous invocations are tolerated
		*
		* @param type Type of radio indication
		*/
		oneway callStateChanged(RadioIndicationType type);

		/*
		* Indicates when voice network state changed
		* Callee must invoke IRadio.getVoiceRegistrationState() and IRadio.getOperator()
		*
		* @param type Type of radio indication
		*/
		oneway voiceNetworkStateChanged(RadioIndicationType type);

		/*
		* Indicates when new SMS is received.
		* Callee must subsequently confirm the receipt of the SMS with a
		* acknowledgeLastIncomingGsmSms()
		*
		* Server must not send newSms() nor newSmsStatusReport() messages until a
		* acknowledgeLastIncomingGsmSms() has been received
		*
		* @param type Type of radio indication
		* @param pdu PDU of SMS-DELIVER represented as byte array.
		* The PDU starts with the SMSC address per TS 27.005 (+CMT:)
		*/
		oneway newSms(RadioIndicationType type, vec<uint8_t> pdu);

		/*
		* Indicates when new SMS Status Report is received.
		* Callee must subsequently confirm the receipt of the SMS with a
		* acknowledgeLastIncomingGsmSms()
		*
		* Server must not send newSms() nor newSmsStatusReport() messages until a
		* acknowledgeLastIncomingGsmSms() has been received
		*
		* @param type Type of radio indication
		* @param pdu PDU of SMS-STATUS-REPORT represented as byte array.
		* The PDU starts with the SMSC address per TS 27.005 (+CMT:)
		*/
		oneway newSmsStatusReport(RadioIndicationType type, vec<uint8_t> pdu);

		/*
		* Indicates when new SMS has been stored on SIM card
		*
		* @param type Type of radio indication
		*/
		oneway newSmsOnSim(RadioIndicationType type);

		/*
		* Indicates when a new USSD message is received.
		* The USSD session is assumed to persist if the type code is REQUEST, otherwise
		* the current session (if any) is assumed to have terminated.
		*
		* @param type Type of radio indication
		* @param modeType USSD type code
		*/
		oneway onUssd(RadioIndicationType type, UssdModeType modeType);

		/*
		* Indicates when radio has received a NITZ time message.
		*
		* @param type Type of radio indication
		* @param nitzTime NITZ time string in the form "yy/mm/dd,hh:mm:ss(+/-)tz,dt"
		* @param receivedTime milliseconds since boot that the NITZ time was received
		*/
		oneway nitzTimeReceived(RadioIndicationType type, string nitzTime, uint64_t receivedTime);

		/*
		* Indicates current signal strength of the radio.
		*
		* @param type Type of radio indication
		* @param signalStrength SignalStrength information as defined in types.hal
		*/
		oneway currentSignalStrength(RadioIndicationType type, SignalStrength signalStrength);

		/*
		* Indicates data call contexts have changed.
		*
		* @param type Type of radio indication
		* @param dcList array of SetupDataCallResult identical to that
		* returned by IRadio.getDataCallList(). It is the complete list
		* of current data contexts including new contexts that have been
		* activated. A data call is only removed from this list when the
		* framework sends a IRadio.deactivateDataCall() or the radio
		* is powered off/on
		*/
		oneway dataCallListChanged(RadioIndicationType type, vec<SetupDataCallResult> dcList);

		/*
		* Reports supplementary service related notification from the network.
		*
		* @param type Type of radio indication
		* @param suppSvc SuppSvcNotification as defined in types.hal
		*/
		oneway suppSvcNotify(RadioIndicationType type, SuppSvcNotification suppSvc);

		/*
		* Indicates when STK session is terminated by SIM.
		*
		* @param type Type of radio indication
		*/
		oneway stkSessionEnd(RadioIndicationType type);

		/*
		* Indicates when SIM issue a STK proactive command to applications
		*
		* @param type Type of radio indication
		* @param cmd SAT/USAT proactive represented as byte array starting with command tag.
		* Refer ETSI TS 102.223 section 9.4 for command types
		*/
		oneway stkProactiveCommand(RadioIndicationType type, vec<uint8_t> cmd);

		/*
		* Indicates when SIM notifies applcations some event happens.
		*
		* @param type Type of radio indication
		* @param cmd SAT/USAT commands or responses
		* sent by ME to SIM or commands handled by ME, represented as byte array
		* starting with first byte of response data for command tag. Refer
		* ETSI TS 102.223 section 9.4 for command types
		*/
		oneway stkEventNotify(RadioIndicationType type, vec<uint8_t> cmd);

		/*
		* Indicates when SIM wants application to setup a voice call.
		*
		* @param type Type of radio indication
		* @param timeout Timeout value in millisec for setting up voice call
		*/
		oneway stkCallSetup(RadioIndicationType type, int64_t timeout);

		/*
		* Indicates that SMS storage on the SIM is full. Sent when the network
		* attempts to deliver a new SMS message. Messages cannot be saved on the
		* SIM until space is freed. In particular, incoming Class 2 messages must not
		* be stored
		*
		* @param type Type of radio indication
		*/
		oneway simSmsStorageFull(RadioIndicationType type);

		/*
		* Indicates that file(s) on the SIM have been updated, or the SIM
		* has been reinitialized.
		* Note: If the SIM state changes as a result of the SIM refresh (eg,
		* SIM_READY -> SIM_LOCKED_OR_ABSENT), simStatusChanged()
		* must be sent.
		*
		* @param type Type of radio indication
		* @param refreshResult Result of sim refresh
		*/
		oneway simRefresh(RadioIndicationType type, SimRefreshResult refreshResult);

		/*
		* Ring indication for an incoming call (eg, RING or CRING event).
		* There must be at least one callRing() at the beginning
		* of a call and sending multiple is optional. If the system property
		* ro.telephony.call_ring.multiple is false then the upper layers
		* must generate the multiple events internally. Otherwise the vendor
		* code must generate multiple callRing() if
		* ro.telephony.call_ring.multiple is true or if it is absent.
		*
		* The rate of these events is controlled by ro.telephony.call_ring.delay
		* and has a default value of 3000 (3 seconds) if absent.
		*
		* @param type Type of radio indication
		* @param isGsm true for GSM & false for CDMA
		* @param record Cdma Signal Information
		*/
		oneway callRing(RadioIndicationType type, bool isGsm, CdmaSignalInfoRecord record);

		/*
		* Indicates that SIM state changes.
		* Callee must invoke getIccCardStatus()
		*
		* @param type Type of radio indication
		*/
		oneway simStatusChanged(RadioIndicationType type);

		/*
		* Indicates when new CDMA SMS is received
		* Callee must subsequently confirm the receipt of the SMS with
		* acknowledgeLastIncomingCdmaSms()
		* Server must not send cdmaNewSms() messages until
		* acknowledgeLastIncomingCdmaSms() has been received
		*
		* @param type Type of radio indication
		* @param msg Cdma Sms Message
		*/
		oneway cdmaNewSms(RadioIndicationType type, CdmaSmsMessage msg);

		/*
		* Indicates when new Broadcast SMS is received
		*
		* @param type Type of radio indication
		* @param data If received from GSM network, "data" is byte array of 88 bytes
		* which indicates each page of a CBS Message sent to the MS by the
		* BTS as coded in 3GPP 23.041 Section 9.4.1.2.
		* If received from UMTS network, "data" is byte array of 90 up to 1252
		* bytes which contain between 1 and 15 CBS Message pages sent as one
		* packet to the MS by the BTS as coded in 3GPP 23.041 Section 9.4.2.2
		*/
		oneway newBroadcastSms(RadioIndicationType type, vec<uint8_t> data);

		/*
		* Indicates that SMS storage on the RUIM is full. Messages
		* cannot be saved on the RUIM until space is freed.
		*
		* @param type Type of radio indication
		*/
		oneway cdmaRuimSmsStorageFull(RadioIndicationType type);

		/*
		* Indicates a restricted state change (eg, for Domain Specific Access Control).
		* Radio must send this msg after radio off/on cycle no matter it is changed or not.
		*
		* @param type Type of radio indication
		* @param state Bitmask of restricted state as defined by PhoneRestrictedState
		*/
		oneway restrictedStateChanged(RadioIndicationType type, PhoneRestrictedState state);

		/*
		* Indicates that the radio system selection module has
		* autonomously entered emergency callback mode.
		*
		* @param type Type of radio indication
		*/
		oneway enterEmergencyCallbackMode(RadioIndicationType type);

		/*
		* Indicates when CDMA radio receives a call waiting indication.
		*
		* @param type Type of radio indication
		* @param callWaitingRecord Cdma CallWaiting information
		*/
		oneway cdmaCallWaiting(RadioIndicationType type, CdmaCallWaiting callWaitingRecord);

		/*
		* Indicates when CDMA radio receives an update of the progress of an OTASP/OTAPA call.
		*
		* @param type Type of radio indication
		* @param status Cdma OTA provision status
		*/
		oneway cdmaOtaProvisionStatus(RadioIndicationType type, CdmaOtaProvisionStatus status);

		/*
		* Indicates when CDMA radio receives one or more info recs.
		*
		* @param type Type of radio indication
		* @param records New Cdma Information
		*/
		oneway cdmaInfoRec(RadioIndicationType type, CdmaInformationRecords records);

		/*
		* This is for OEM specific use.
		*
		* @param type Type of radio indication
		* @param data data passed as raw bytes
		*/
		oneway oemHookRaw(RadioIndicationType type, vec<uint8_t> data);

		/*
		* Indicates that nework doesn't have in-band information, need to
		* play out-band tone.
		*
		* @param type Type of radio indication
		* @param start true = start play ringback tone, false = stop playing ringback tone
		*/
		oneway indicateRingbackTone(RadioIndicationType type, bool start);

		/*
		* Indicates that framework/application must reset the uplink mute state.
		*
		* @param type Type of radio indication
		*/
		oneway resendIncallMute(RadioIndicationType type);

		/*
		* Indicates when CDMA subscription source changed.
		*
		* @param type Type of radio indication
		* @param cdmaSource New Cdma SubscriptionSource
		*/
		oneway cdmaSubscriptionSourceChanged(RadioIndicationType type,
		CdmaSubscriptionSource cdmaSource);

		/*
		* Indicates when PRL (preferred roaming list) changes.
		*
		* @param type Type of radio indication
		* @param version PRL version after PRL changes
		*/
		oneway cdmaPrlChanged(RadioIndicationType type, int32_t version);

		/*
		* Indicates when Emergency Callback Mode Ends.
		* Indicates that the radio system selection module has
		* proactively exited emergency callback mode.
		*
		* @param type Type of radio indication
		*/
		oneway exitEmergencyCallbackMode(RadioIndicationType type);

		/*
		* TODO(Consider moving this to separate interface. Client will receive this function with an
		* IRadioResponse interface so that all requests in that IRadioResponse will fail before
		* rilConnected() is received)
		*
		* Indicates the ril connects and returns the version
		*
		* @param type Type of radio indication
		*/
		oneway rilConnected(RadioIndicationType type);

		/*
		* Indicates that voice technology has changed. Responds with new rat.
		*
		* @param type Type of radio indication
		* @param rat Current new voice rat
		*/
		oneway voiceRadioTechChanged(RadioIndicationType type, RadioTechnology rat);

		/*
		* Same information as returned by getCellInfoList().
		*
		* @param type Type of radio indication
		* @param records Current cell information known to radio
		*/
		oneway cellInfoList(RadioIndicationType type, vec<CellInfo> records);

		/*
		* Indicates when IMS registration state has changed.
		* To get IMS registration state and IMS SMS format, callee needs to invoke
		* getImsRegistrationState()
		*
		* @param type Type of radio indication
		*/
		oneway imsNetworkStateChanged(RadioIndicationType type);

		/*
		* Indicated when there is a change in subscription status.
		* This event must be sent in the following scenarios
		* - subscription readiness at modem, which was selected by telephony layer
		* - when subscription is deactivated by modem due to UICC card removal
		* - when network invalidates the subscription i.e. attach reject due to authentication reject
		*
		* @param type Type of radio indication
		* @param activate false for subscription deactivated, true for subscription activated
		*/
		oneway subscriptionStatusChanged(RadioIndicationType type, bool activate);

		/*
		* Indicates when Single Radio Voice Call Continuity (SRVCC)
		* progress state has changed
		*
		* @param type Type of radio indication
		* @param state New Srvcc State
		*/
		oneway srvccStateNotify(RadioIndicationType type, SrvccState state);

		/*
		* Indicates when the hardware configuration associated with the RILd changes.
		*
		* @param type Type of radio indication
		* @param configs Array of hardware configs
		*/
		oneway hardwareConfigChanged(RadioIndicationType type, vec<HardwareConfig> configs);

		/*
		* Sent when setRadioCapability() completes.
		* Returns the phone radio capability exactly as
		* getRadioCapability() and must be the
		* same set as sent by setRadioCapability().
		*
		* @param type Type of radio indication
		* @param rc Current radio capability
		*/
		oneway radioCapabilityIndication(RadioIndicationType type, RadioCapability rc);

		/*
		* Indicates when Supplementary service(SS) response is received when DIAL/USSD/SS is changed to
		* SS by call control.
		*
		* @param type Type of radio indication
		*/
		oneway onSupplementaryServiceIndication(RadioIndicationType type, StkCcUnsolSsResult ss);

		/*
		* Indicates when there is an ALPHA from UICC during Call Control.
		*
		* @param type Type of radio indication
		* @param alpha ALPHA string from UICC in UTF-8 format
		*/
		oneway stkCallControlAlphaNotify(RadioIndicationType type, string alpha);

		/*
		* Indicates when there is an incoming Link Capacity Estimate (LCE) info report.
		*
		* @param type Type of radio indication
		* @param lce LceData information
		*/
		oneway lceData(RadioIndicationType type, LceDataInfo lce);

		/*
		* Indicates when there is new Carrier PCO data received for a data call. Ideally
		* only new data must be forwarded, though this is not required. Multiple
		* boxes of carrier PCO data for a given call must result in a series of
		* pcoData() calls.
		*
		* @param type Type of radio indication
		* @param pco New PcoData
		*/
		oneway pcoData(RadioIndicationType type, PcoDataInfo pco);

		/*
		* Indicates when there is a modem reset.
		*
		* When modem restarts, one of the following radio state transitions must happen
		* 1) RadioState:ON->RadioState:UNAVAILABLE->RadioState:ON or
		* 2) RadioState:OFF->RadioState:UNAVAILABLE->RadioState:OFF
		* This message must be sent either just before the Radio State changes to RadioState:UNAVAILABLE
		* or just after but must never be sent after the Radio State changes from RadioState:UNAVAILABLE
		* to RadioState:ON/RadioState:OFF again.
		* It must NOT be sent after the Radio state changes to RadioState:ON/RadioState:OFF after the
		* modem restart as that may be interpreted as a second modem reset by the
		* framework.
		*
		* @param type Type of radio indication
		* @param reason the reason for the reset. It
		* may be a crash signature if the restart was due to a crash or some
		* string such as "user-initiated restart" or "AT command initiated
		* restart" that explains the cause of the modem restart
		*/
		oneway modemReset(RadioIndicationType type, string reason);
		};
		No newline at end of file

radio/1.0/types.hal

+365 −59

File changed.

Preview size limit exceeded, changes collapsed.