Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d91322ea authored by Treehugger Robot's avatar Treehugger Robot Committed by Gerrit Code Review
Browse files

Merge "Extend Telephony HIDL interface to include unsolicited RIL commands."

parents 849d24cc a08c29cb
Loading
Loading
Loading
Loading
+1081 −27

File changed.

Preview size limit exceeded, changes collapsed.

+446 −2
Original line number Diff line number Diff line
@@ -21,9 +21,453 @@ package android.hardware.radio@1.0;
 */
interface IRadioIndication {
    /*
     * Called when radio state changes.
     * Indicates when radio state changes.
     *
     * @param type Type of radio indication
     * @param radioState Current radio state
     */
    oneway radioStateChanged(RadioState radioState);
    oneway radioStateChanged(RadioIndicationType type, RadioState radioState);

    /*
     * Indicates when call state has changed.
     * Callee must invoke IRadio.getCurrentCalls()
     * Must be invoked on, for example,
     * "RING", "BUSY", "NO CARRIER", and also call state
     * transitions (DIALING->ALERTING ALERTING->ACTIVE)
     *
     * Redundent or extraneous invocations are tolerated
     *
     * @param type Type of radio indication
     */
    oneway callStateChanged(RadioIndicationType type);

    /*
     * Indicates when voice network state changed
     * Callee must invoke IRadio.getVoiceRegistrationState() and IRadio.getOperator()
     *
     * @param type Type of radio indication
     */
    oneway voiceNetworkStateChanged(RadioIndicationType type);

    /*
     * Indicates when new SMS is received.
     * Callee must subsequently confirm the receipt of the SMS with a
     * acknowledgeLastIncomingGsmSms()
     *
     * Server must not send newSms() nor newSmsStatusReport() messages until a
     * acknowledgeLastIncomingGsmSms() has been received
     *
     * @param type Type of radio indication
     * @param pdu PDU of SMS-DELIVER represented as byte array.
     *        The PDU starts with the SMSC address per TS 27.005 (+CMT:)
     */
    oneway newSms(RadioIndicationType type, vec<uint8_t> pdu);

    /*
     * Indicates when new SMS Status Report is received.
     * Callee must subsequently confirm the receipt of the SMS with a
     * acknowledgeLastIncomingGsmSms()
     *
     * Server must not send newSms() nor newSmsStatusReport() messages until a
     * acknowledgeLastIncomingGsmSms() has been received
     *
     * @param type Type of radio indication
     * @param pdu PDU of SMS-STATUS-REPORT represented as byte array.
     *        The PDU starts with the SMSC address per TS 27.005 (+CMT:)
     */
    oneway newSmsStatusReport(RadioIndicationType type, vec<uint8_t> pdu);

    /*
     * Indicates when new SMS has been stored on SIM card
     *
     * @param type Type of radio indication
     */
    oneway newSmsOnSim(RadioIndicationType type);

    /*
     * Indicates when a new USSD message is received.
     * The USSD session is assumed to persist if the type code is REQUEST, otherwise
     * the current session (if any) is assumed to have terminated.
     *
     * @param type Type of radio indication
     * @param modeType USSD type code
     */
    oneway onUssd(RadioIndicationType type, UssdModeType modeType);

    /*
     * Indicates when radio has received a NITZ time message.
     *
     * @param type Type of radio indication
     * @param nitzTime NITZ time string in the form "yy/mm/dd,hh:mm:ss(+/-)tz,dt"
     * @param receivedTime milliseconds since boot that the NITZ time was received
     */
    oneway nitzTimeReceived(RadioIndicationType type, string nitzTime, uint64_t receivedTime);

    /*
     * Indicates current signal strength of the radio.
     *
     * @param type Type of radio indication
     * @param signalStrength SignalStrength information as defined in types.hal
     */
    oneway currentSignalStrength(RadioIndicationType type, SignalStrength signalStrength);

    /*
     * Indicates data call contexts have changed.
     *
     * @param type Type of radio indication
     * @param dcList array of SetupDataCallResult identical to that
     *        returned by IRadio.getDataCallList(). It is the complete list
     *        of current data contexts including new contexts that have been
     *        activated. A data call is only removed from this list when the
     *        framework sends a IRadio.deactivateDataCall() or the radio
     *        is powered off/on
     */
    oneway dataCallListChanged(RadioIndicationType type, vec<SetupDataCallResult> dcList);

    /*
     * Reports supplementary service related notification from the network.
     *
     * @param type Type of radio indication
     * @param suppSvc SuppSvcNotification as defined in types.hal
     */
    oneway suppSvcNotify(RadioIndicationType type, SuppSvcNotification suppSvc);

    /*
     * Indicates when STK session is terminated by SIM.
     *
     * @param type Type of radio indication
     */
    oneway stkSessionEnd(RadioIndicationType type);

    /*
     * Indicates when SIM issue a STK proactive command to applications
     *
     * @param type Type of radio indication
     * @param cmd SAT/USAT proactive represented as byte array starting with command tag.
     *        Refer ETSI TS 102.223 section 9.4 for command types
     */
    oneway stkProactiveCommand(RadioIndicationType type, vec<uint8_t> cmd);

    /*
     * Indicates when SIM notifies applcations some event happens.
     *
     * @param type Type of radio indication
     * @param cmd SAT/USAT commands or responses
     *        sent by ME to SIM or commands handled by ME, represented as byte array
     *        starting with first byte of response data for command tag. Refer
     *        ETSI TS 102.223 section 9.4 for command types
     */
    oneway stkEventNotify(RadioIndicationType type, vec<uint8_t> cmd);

    /*
     * Indicates when SIM wants application to setup a voice call.
     *
     * @param type Type of radio indication
     * @param timeout Timeout value in millisec for setting up voice call
     */
    oneway stkCallSetup(RadioIndicationType type, int64_t timeout);

    /*
     * Indicates that SMS storage on the SIM is full. Sent when the network
     * attempts to deliver a new SMS message. Messages cannot be saved on the
     * SIM until space is freed. In particular, incoming Class 2 messages must not
     * be stored
     *
     * @param type Type of radio indication
     */
    oneway simSmsStorageFull(RadioIndicationType type);

    /*
     * Indicates that file(s) on the SIM have been updated, or the SIM
     * has been reinitialized.
     * Note: If the SIM state changes as a result of the SIM refresh (eg,
     * SIM_READY -> SIM_LOCKED_OR_ABSENT), simStatusChanged()
     * must be sent.
     *
     * @param type Type of radio indication
     * @param refreshResult Result of sim refresh
     */
    oneway simRefresh(RadioIndicationType type, SimRefreshResult refreshResult);

    /*
     * Ring indication for an incoming call (eg, RING or CRING event).
     * There must be at least one callRing() at the beginning
     * of a call and sending multiple is optional. If the system property
     * ro.telephony.call_ring.multiple is false then the upper layers
     * must generate the multiple events internally. Otherwise the vendor
     * code must generate multiple callRing() if
     * ro.telephony.call_ring.multiple is true or if it is absent.
     *
     * The rate of these events is controlled by ro.telephony.call_ring.delay
     * and has a default value of 3000 (3 seconds) if absent.
     *
     * @param type Type of radio indication
     * @param isGsm true for GSM & false for CDMA
     * @param record Cdma Signal Information
     */
    oneway callRing(RadioIndicationType type, bool isGsm, CdmaSignalInfoRecord record);

    /*
     * Indicates that SIM state changes.
     * Callee must invoke getIccCardStatus()
     *
     * @param type Type of radio indication
     */
    oneway simStatusChanged(RadioIndicationType type);

    /*
     * Indicates when new CDMA SMS is received
     * Callee must subsequently confirm the receipt of the SMS with
     * acknowledgeLastIncomingCdmaSms()
     * Server must not send cdmaNewSms() messages until
     * acknowledgeLastIncomingCdmaSms() has been received
     *
     * @param type Type of radio indication
     * @param msg Cdma Sms Message
     */
    oneway cdmaNewSms(RadioIndicationType type, CdmaSmsMessage msg);

    /*
     * Indicates when new Broadcast SMS is received
     *
     * @param type Type of radio indication
     * @param data If received from GSM network, "data" is byte array of 88 bytes
     *        which indicates each page of a CBS Message sent to the MS by the
     *        BTS as coded in 3GPP 23.041 Section 9.4.1.2.
     *        If received from UMTS network, "data" is byte array of 90 up to 1252
     *        bytes which contain between 1 and 15 CBS Message pages sent as one
     *        packet to the MS by the BTS as coded in 3GPP 23.041 Section 9.4.2.2
     */
    oneway newBroadcastSms(RadioIndicationType type, vec<uint8_t> data);

    /*
     * Indicates that SMS storage on the RUIM is full. Messages
     * cannot be saved on the RUIM until space is freed.
     *
     * @param type Type of radio indication
     */
    oneway cdmaRuimSmsStorageFull(RadioIndicationType type);

    /*
     * Indicates a restricted state change (eg, for Domain Specific Access Control).
     * Radio must send this msg after radio off/on cycle no matter it is changed or not.
     *
     * @param type Type of radio indication
     * @param state Bitmask of restricted state as defined by PhoneRestrictedState
     */
    oneway restrictedStateChanged(RadioIndicationType type, PhoneRestrictedState state);

    /*
     * Indicates that the radio system selection module has
     * autonomously entered emergency callback mode.
     *
     * @param type Type of radio indication
     */
    oneway enterEmergencyCallbackMode(RadioIndicationType type);

    /*
     * Indicates when CDMA radio receives a call waiting indication.
     *
     * @param type Type of radio indication
     * @param callWaitingRecord Cdma CallWaiting information
     */
    oneway cdmaCallWaiting(RadioIndicationType type, CdmaCallWaiting callWaitingRecord);

    /*
     * Indicates when CDMA radio receives an update of the progress of an OTASP/OTAPA call.
     *
     * @param type Type of radio indication
     * @param status Cdma OTA provision status
     */
    oneway cdmaOtaProvisionStatus(RadioIndicationType type, CdmaOtaProvisionStatus status);

   /*
    * Indicates when CDMA radio receives one or more info recs.
    *
    * @param type Type of radio indication
    * @param records New Cdma Information
    */
   oneway cdmaInfoRec(RadioIndicationType type, CdmaInformationRecords records);

   /*
    * This is for OEM specific use.
    *
    * @param type Type of radio indication
    * @param data data passed as raw bytes
    */
   oneway oemHookRaw(RadioIndicationType type, vec<uint8_t> data);

   /*
    * Indicates that nework doesn't have in-band information, need to
    * play out-band tone.
    *
    * @param type Type of radio indication
    * @param start true = start play ringback tone, false = stop playing ringback tone
    */
   oneway indicateRingbackTone(RadioIndicationType type, bool start);

   /*
    * Indicates that framework/application must reset the uplink mute state.
    *
    * @param type Type of radio indication
    */
   oneway resendIncallMute(RadioIndicationType type);

   /*
    * Indicates when CDMA subscription source changed.
    *
    * @param type Type of radio indication
    * @param cdmaSource New Cdma SubscriptionSource
    */
   oneway cdmaSubscriptionSourceChanged(RadioIndicationType type,
           CdmaSubscriptionSource cdmaSource);

   /*
    * Indicates when PRL (preferred roaming list) changes.
    *
    * @param type Type of radio indication
    * @param version PRL version after PRL changes
    */
   oneway cdmaPrlChanged(RadioIndicationType type, int32_t version);

   /*
    * Indicates when Emergency Callback Mode Ends.
    * Indicates that the radio system selection module has
    * proactively exited emergency callback mode.
    *
    * @param type Type of radio indication
    */
   oneway exitEmergencyCallbackMode(RadioIndicationType type);

   /*
    * TODO(Consider moving this to separate interface. Client will receive this function with an
    * IRadioResponse interface so that all requests in that IRadioResponse will fail before
    * rilConnected() is received)
    *
    * Indicates the ril connects and returns the version
    *
    * @param type Type of radio indication
    */
   oneway rilConnected(RadioIndicationType type);

   /*
    * Indicates that voice technology has changed. Responds with new rat.
    *
    * @param type Type of radio indication
    * @param rat Current new voice rat
    */
   oneway voiceRadioTechChanged(RadioIndicationType type, RadioTechnology rat);

   /*
    * Same information as returned by getCellInfoList().
    *
    * @param type Type of radio indication
    * @param records Current cell information known to radio
    */
   oneway cellInfoList(RadioIndicationType type, vec<CellInfo> records);

   /*
    * Indicates when IMS registration state has changed.
    * To get IMS registration state and IMS SMS format, callee needs to invoke
    * getImsRegistrationState()
    *
    * @param type Type of radio indication
    */
   oneway imsNetworkStateChanged(RadioIndicationType type);

   /*
    * Indicated when there is a change in subscription status.
    * This event must be sent in the following scenarios
    *  - subscription readiness at modem, which was selected by telephony layer
    *  - when subscription is deactivated by modem due to UICC card removal
    *  - when network invalidates the subscription i.e. attach reject due to authentication reject
    *
    * @param type Type of radio indication
    * @param activate false for subscription deactivated, true for subscription activated
    */
   oneway subscriptionStatusChanged(RadioIndicationType type, bool activate);

   /*
    * Indicates when Single Radio Voice Call Continuity (SRVCC)
    * progress state has changed
    *
    * @param type Type of radio indication
    * @param state New Srvcc State
    */
   oneway srvccStateNotify(RadioIndicationType type, SrvccState state);

   /*
    * Indicates when the hardware configuration associated with the RILd changes.
    *
    * @param type Type of radio indication
    * @param configs Array of hardware configs
    */
   oneway hardwareConfigChanged(RadioIndicationType type, vec<HardwareConfig> configs);

   /*
    * Sent when setRadioCapability() completes.
    * Returns the phone radio capability exactly as
    * getRadioCapability() and must be the
    * same set as sent by setRadioCapability().
    *
    * @param type Type of radio indication
    * @param rc Current radio capability
    */
   oneway radioCapabilityIndication(RadioIndicationType type, RadioCapability rc);

   /*
    * Indicates when Supplementary service(SS) response is received when DIAL/USSD/SS is changed to
    * SS by call control.
    *
    * @param type Type of radio indication
    */
   oneway onSupplementaryServiceIndication(RadioIndicationType type, StkCcUnsolSsResult ss);

   /*
    * Indicates when there is an ALPHA from UICC during Call Control.
    *
    * @param type Type of radio indication
    * @param alpha ALPHA string from UICC in UTF-8 format
    */
   oneway stkCallControlAlphaNotify(RadioIndicationType type, string alpha);

   /*
    * Indicates when there is an incoming Link Capacity Estimate (LCE) info report.
    *
    * @param type Type of radio indication
    * @param lce LceData information
    */
   oneway lceData(RadioIndicationType type, LceDataInfo lce);

   /*
    * Indicates when there is new Carrier PCO data received for a data call. Ideally
    * only new data must be forwarded, though this is not required. Multiple
    * boxes of carrier PCO data for a given call must result in a series of
    * pcoData() calls.
    *
    * @param type Type of radio indication
    * @param pco New PcoData
    */
   oneway pcoData(RadioIndicationType type, PcoDataInfo pco);

   /*
    * Indicates when there is a modem reset.
    *
    * When modem restarts, one of the following radio state transitions must happen
    * 1) RadioState:ON->RadioState:UNAVAILABLE->RadioState:ON or
    * 2) RadioState:OFF->RadioState:UNAVAILABLE->RadioState:OFF
    * This message must be sent either just before the Radio State changes to RadioState:UNAVAILABLE
    * or just after but must never be sent after the Radio State changes from RadioState:UNAVAILABLE
    * to RadioState:ON/RadioState:OFF again.
    * It must NOT be sent after the Radio state changes to RadioState:ON/RadioState:OFF after the
    * modem restart as that may be interpreted as a second modem reset by the
    * framework.
    *
    * @param type Type of radio indication
    * @param reason the reason for the reset. It
    *        may be a crash signature if the restart was due to a crash or some
    *        string such as "user-initiated restart" or "AT command initiated
    *        restart" that explains the cause of the modem restart
    */
   oneway modemReset(RadioIndicationType type, string reason);
};
 No newline at end of file
+365 −59

File changed.

Preview size limit exceeded, changes collapsed.