Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 3f050c1a authored by Roshan Pius's avatar Roshan Pius
Browse files

supplicant(interface): Add support for DRIVER commands 

These were legacy commands added to wpa_supplicant specifically for
android when the vendor HAL did not exist. These string commands are
passed as passthough to the driver by wpa_supplicant. Instead of adding
a single method to pass through these strings. Add separate methods for
each "DRIVER xxx" command that we currently used in Android framework.

Bug: 32699292
Test: Compiles
Change-Id: I8b62b3250496fa996bb97b4af0ba570a3d345cc3
parent 0dbb9903

wifi/supplicant/1.0/ISupplicantP2pIface.hal

+28 −0
Original line number Diff line number Diff line
@@ -59,6 +59,22 @@ interface ISupplicantP2pIface extends ISupplicantIface { 
      uint32_t max;

  };



  /**

   * Enum describing the modes of Miracast supported

   * via driver commands.

   */

  enum MiracastMode : uint8_t {

    DISABLED = 0,

    /**

     * Operating as source.

     */

    SOURCE = 1,

    /**

     * Operating as sink.

     */

    SINK = 2

  };



  /**

   * Register for callbacks from this interface.

   *
@@ -511,4 +527,16 @@ interface ISupplicantP2pIface extends ISupplicantIface { 
   */

  cancelServiceDiscovery(uint64_t identifier)

      generates (SupplicantStatus status);



  /**

   * Send driver command to set Miracast mode.

   *

   * @param mode Mode of Miracast.

   * @return status Status of the operation.

   *         Possible status codes:

   *         |SupplicantStatusCode.SUCCESS|,

   *         |SupplicantStatusCode.FAILURE_UNKNOWN|

   */

  setMiracastMode(MiracastMode mode)

      generates (SupplicantStatus status);

};

wifi/supplicant/1.0/ISupplicantStaIface.hal

+129 −3
Original line number Diff line number Diff line
@@ -48,6 +48,25 @@ interface ISupplicantStaIface extends ISupplicantIface { 
    OSU_PROVIDERS_LIST = 8,

  };



  /**

   * Enum describing the types of RX filter supported

   * via driver commands.

   */

  enum RxFilterType : uint8_t {

    V4_MULTICAST = 0,

    V6_MULTICAST = 1

  };



  /**

   * Enum describing the modes of BT coexistence supported

   * via driver commands.

   */

  enum BtCoexistenceMode : uint8_t {

    ENABLED = 0,

    DISABLED = 1,

    SENSE = 2

  };



  /**

   * Register for callbacks from this interface.

   *
@@ -120,7 +139,7 @@ interface ISupplicantStaIface extends ISupplicantIface { 
  setPowerSave(bool enable) generates (SupplicantStatus status);



  /**

   * Initiate TDLS discover with the provided peer mac address.

   * Initiate TDLS discover with the provided peer MAC address.

   *

   * @param macAddress MAC address of the peer.

   * @return status Status of the operation.
@@ -133,7 +152,7 @@ interface ISupplicantStaIface extends ISupplicantIface { 
      generates (SupplicantStatus status);



  /**

   * Initiate TDLS setup with the provided peer mac address.

   * Initiate TDLS setup with the provided peer MAC address.

   *

   * @param macAddress MAC address of the peer.

   * @return status Status of the operation.
@@ -146,7 +165,7 @@ interface ISupplicantStaIface extends ISupplicantIface { 
      generates (SupplicantStatus status);



  /**

   * Initiate TDLS teardown with the provided peer mac address.

   * Initiate TDLS teardown with the provided peer MAC address.

   *

   * @param macAddress MAC address of the peer.

   * @return status Status of the operation.
@@ -193,4 +212,111 @@ interface ISupplicantStaIface extends ISupplicantIface { 
   */

  initiateHs20IconQuery(MacAddress macAddress, string fileName)

      generates (SupplicantStatus status);



  /**

   * Send driver command to get MAC address of the device.

   *

   * @return status Status of the operation.

   *         Possible status codes:

   *         |SupplicantStatusCode.SUCCESS|,

   *         |SupplicantStatusCode.FAILURE_UNKNOWN|

   * @return macAddr MAC address of the device.

   */

  getMacAddress()

      generates (SupplicantStatus status, MacAddress macAddr);



  /**

   * Send driver command to start RX filter.

   *

   * @return status Status of the operation.

   *         Possible status codes:

   *         |SupplicantStatusCode.SUCCESS|,

   *         |SupplicantStatusCode.FAILURE_UNKNOWN|

   */

  startRxFilter() generates (SupplicantStatus status);



  /**

   * Send driver command to stop RX filter.

   *

   * @return status Status of the operation.

   *         Possible status codes:

   *         |SupplicantStatusCode.SUCCESS|,

   *         |SupplicantStatusCode.FAILURE_UNKNOWN|

   */

  stopRxFilter() generates (SupplicantStatus status);



  /**

   * Send driver command to add the specified RX filter.

   *

   * @param type Type of filter.

   * @return status Status of the operation.

   *         Possible status codes:

   *         |SupplicantStatusCode.SUCCESS|,

   *         |SupplicantStatusCode.FAILURE_UNKNOWN|

   */

  addRxFilter(RxFilterType type)

      generates (SupplicantStatus status);



  /**

   * Send driver command to remove the specified RX filter.

   *

   * @param type Type of filter.

   * @return status Status of the operation.

   *         Possible status codes:

   *         |SupplicantStatusCode.SUCCESS|,

   *         |SupplicantStatusCode.FAILURE_UNKNOWN|

   */

  removeRxFilter(RxFilterType type)

      generates (SupplicantStatus status);



  /**

   * Send driver command to set Bluetooth coexistence mode.

   *

   * @param mode Mode of Bluetooth coexistence.

   * @return status Status of the operation.

   *         Possible status codes:

   *         |SupplicantStatusCode.SUCCESS|,

   *         |SupplicantStatusCode.FAILURE_UNKNOWN|

   */

  setBtCoexistenceMode(BtCoexistenceMode mode)

      generates (SupplicantStatus status);



  /**

   * Send driver command to set Bluetooth coexistence scan mode.

   * When this mode is on, some of the low-level scan parameters

   * used by the driver are changed to reduce interference

   * with A2DP streaming.

   *

   * @param enable true to enable, false to disable.

   * @return status Status of the operation.

   *         Possible status codes:

   *         |SupplicantStatusCode.SUCCESS|,

   *         |SupplicantStatusCode.FAILURE_UNKNOWN|

   */

  setBtCoexistenceScanModeEnabled(bool enable)

      generates (SupplicantStatus status);



  /**

   * Send driver command to set suspend optimizations for power save.

   *

   * @param enable true to enable, false to disable.

   * @return status Status of the operation.

   *         Possible status codes:

   *         |SupplicantStatusCode.SUCCESS|,

   *         |SupplicantStatusCode.FAILURE_UNKNOWN|

   */

  setSuspendModeEnabled(bool enable)

      generates (SupplicantStatus status);



  /**

   * Send driver command to set country code.

   *

   * @param code 2 byte country code (as defined in ISO 3166) to set.

   * @return status Status of the operation.

   *         Possible status codes:

   *         |SupplicantStatusCode.SUCCESS|,

   *         |SupplicantStatusCode.FAILURE_UNKNOWN|

   */

  setCountryCode(int8_t[2] code)

      generates (SupplicantStatus status);

};

wifi/supplicant/1.0/ISupplicant.hal

+8 −8

File changed.

Contains only whitespace changes.