supplicant(interface): Add support for DRIVER commands am: 3f050c1a0f am: 2255fd62d6 (1b57c1d3) · Commits · e / os / android_hardware_interfaces

wifi/supplicant/1.0/ISupplicantP2pIface.hal

+28 −0

Original line number	Diff line number	Diff line
		@@ -59,6 +59,22 @@ interface ISupplicantP2pIface extends ISupplicantIface {
		uint32_t max;
		};

		/**
		* Enum describing the modes of Miracast supported
		* via driver commands.
		*/
		enum MiracastMode : uint8_t {
		DISABLED = 0,
		/**
		* Operating as source.
		*/
		SOURCE = 1,
		/**
		* Operating as sink.
		*/
		SINK = 2
		};

		/**
		* Register for callbacks from this interface.
		*
		@@ -511,4 +527,16 @@ interface ISupplicantP2pIface extends ISupplicantIface {
		*/
		cancelServiceDiscovery(uint64_t identifier)
		generates (SupplicantStatus status);

		/**
		* Send driver command to set Miracast mode.
		*
		* @param mode Mode of Miracast.
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|
		*/
		setMiracastMode(MiracastMode mode)
		generates (SupplicantStatus status);
		};

wifi/supplicant/1.0/ISupplicantStaIface.hal

+129 −3

Original line number	Diff line number	Diff line
		@@ -48,6 +48,25 @@ interface ISupplicantStaIface extends ISupplicantIface {
		OSU_PROVIDERS_LIST = 8,
		};

		/**
		* Enum describing the types of RX filter supported
		* via driver commands.
		*/
		enum RxFilterType : uint8_t {
		V4_MULTICAST = 0,
		V6_MULTICAST = 1
		};

		/**
		* Enum describing the modes of BT coexistence supported
		* via driver commands.
		*/
		enum BtCoexistenceMode : uint8_t {
		ENABLED = 0,
		DISABLED = 1,
		SENSE = 2
		};

		/**
		* Register for callbacks from this interface.
		*
		@@ -120,7 +139,7 @@ interface ISupplicantStaIface extends ISupplicantIface {
		setPowerSave(bool enable) generates (SupplicantStatus status);

		/**
		* Initiate TDLS discover with the provided peer mac address.
		* Initiate TDLS discover with the provided peer MAC address.
		*
		* @param macAddress MAC address of the peer.
		* @return status Status of the operation.
		@@ -133,7 +152,7 @@ interface ISupplicantStaIface extends ISupplicantIface {
		generates (SupplicantStatus status);

		/**
		* Initiate TDLS setup with the provided peer mac address.
		* Initiate TDLS setup with the provided peer MAC address.
		*
		* @param macAddress MAC address of the peer.
		* @return status Status of the operation.
		@@ -146,7 +165,7 @@ interface ISupplicantStaIface extends ISupplicantIface {
		generates (SupplicantStatus status);

		/**
		* Initiate TDLS teardown with the provided peer mac address.
		* Initiate TDLS teardown with the provided peer MAC address.
		*
		* @param macAddress MAC address of the peer.
		* @return status Status of the operation.
		@@ -193,4 +212,111 @@ interface ISupplicantStaIface extends ISupplicantIface {
		*/
		initiateHs20IconQuery(MacAddress macAddress, string fileName)
		generates (SupplicantStatus status);

		/**
		* Send driver command to get MAC address of the device.
		*
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|
		* @return macAddr MAC address of the device.
		*/
		getMacAddress()
		generates (SupplicantStatus status, MacAddress macAddr);

		/**
		* Send driver command to start RX filter.
		*
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|
		*/
		startRxFilter() generates (SupplicantStatus status);

		/**
		* Send driver command to stop RX filter.
		*
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|
		*/
		stopRxFilter() generates (SupplicantStatus status);

		/**
		* Send driver command to add the specified RX filter.
		*
		* @param type Type of filter.
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|
		*/
		addRxFilter(RxFilterType type)
		generates (SupplicantStatus status);

		/**
		* Send driver command to remove the specified RX filter.
		*
		* @param type Type of filter.
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|
		*/
		removeRxFilter(RxFilterType type)
		generates (SupplicantStatus status);

		/**
		* Send driver command to set Bluetooth coexistence mode.
		*
		* @param mode Mode of Bluetooth coexistence.
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|
		*/
		setBtCoexistenceMode(BtCoexistenceMode mode)
		generates (SupplicantStatus status);

		/**
		* Send driver command to set Bluetooth coexistence scan mode.
		* When this mode is on, some of the low-level scan parameters
		* used by the driver are changed to reduce interference
		* with A2DP streaming.
		*
		* @param enable true to enable, false to disable.
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|
		*/
		setBtCoexistenceScanModeEnabled(bool enable)
		generates (SupplicantStatus status);

		/**
		* Send driver command to set suspend optimizations for power save.
		*
		* @param enable true to enable, false to disable.
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|
		*/
		setSuspendModeEnabled(bool enable)
		generates (SupplicantStatus status);

		/**
		* Send driver command to set country code.
		*
		* @param code 2 byte country code (as defined in ISO 3166) to set.
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|
		*/
		setCountryCode(int8_t[2] code)
		generates (SupplicantStatus status);
		};

wifi/supplicant/1.0/ISupplicant.hal

+8 −8

File changed.

Contains only whitespace changes.