DOWNSTREAM commit '2d0bbcbf' from AU66 into msm-4.14-display

* commit '2d0bbcbf':
  clk: qcom: Add halt_reg offset for pcie pipe clock
  arm: dts: msm: Add the smcinvoke node for sdxprairie
  defconfig: sdxprairie: Enable the smcinvoke driver
  spi-geni: Synchronize SPI transfer and ISR
  mm: usercopy: skip stack page span check
  net: qrtr: Add forwarding support based on net id
  defconfig: sdxprairie: disable DCC console
  defconfig: sdxprairie: Enable power reset config
  ARM: dts: msm: Split device tree for SDXPRAIRIE target
  dwc3-msm: Fix error path with dwc3_msm_probe() API
  cnss2: Do not suspend MHI if PCIe is not going to be suspended
  cnss2: Update WLFW service with QDSS related messages
  msm: ipa: Fix to avoid  NETDEV WATCHDOG warning logs
  ARM: configs: Enable mmc fault enjection for trinket
  ARM: dts: Add ice clock entries for trinket
  ARM: dts: msm: add support for frequency scaling on SDXPRAIRIE
  usb: phy: qusb: Rely on regulator_enable() for ref_counting
  ARM: dts: msm: add msm hdcp node in sdmmagpie
  ARM: dts: Add emmc and sdcard device node for trinket
  cnss2: Call remove callback only if in probed state
  ARM: dts: msm: Update SoC version for Trinket
  usb: phy: qusb2: Rely on regulator_enable() for ref_counting
  usb: phy: Remove flags for clock enable/disable
  clk: qcom: gcc: Update PLL type for gpll and flags for rcg2 clk
  clk: qcom: alpha: Update offset of USER_CTL register
  msm: vidc: Limit the max secure instances to 3 for sm6150
  ARM: dts: msm: Add BCL sensors and default thermal zone rules for PMI632
  ARM: dts: msm: Add die temperature zone config for PM6125 and PMI632
  ARM: dts: msm: Add default thermal zone definition for TRINKET
  ARM: dts: msm: Add LMH-DCVSh configuration for TRINKET
  drivers: thermal: virtual-sensor: Add new virtual sensor for TRINKET
  ARM: dts: msm: Add regulator cooling devices for TRINKET
  ARM: dts: msm: Add QMI cooling device for TRINKET
  ARM: dts: msm: Update TSENS userspace thermal zone rules for TRINKET
  defconfig: msm: Update thermal drivers for TRINKET
  msm: ADSPRPC: Log release error only when init is successful
  defconfig: arm64: Update defconfig for trinket
  msm: npu: Remove driver code to reorder clocks
  msm: ipa: Fix misleading registers numbering
  msm: fastcvpd: changing states during init and deinit
  ARM: dts: msm: update carveout memory for secure DSP on trinket
  ARM: dts: msm: correct the carveout memory region address on trinket
  power: qg: Expose cc soc value through power supply property
  power-supply: Add CC_SOC power supply property
  clk: qcom: clk-rpmh: Update PMIC XO clocks clocks supported on SDXPRAIRIE
  msm: camera: Fix arbitrary kernel write
  ARM: dts: msm: Enable cpu node on SDXPRAIRIE
  clk: qcom: cpu-sdxprairie: Add set rate notifier for APCS mux
  clk: qcom: alpha: Add the list_registers ops for Lucid PLL
  msm: ipa: Ignore IPA SMP2P Probe for APQ platforms
  msm: ipa: Ignore force clear requests on APQ platform
  msm: ipa: Register to remote modem SSR events
  soc: qcom: qmi_interface: sync release and data_ready callback
  net: qrtr: Check function pointer before calling
  msm: ipa3: Use void to indicate no arguments required
  ARM: dts: msm: Update SID2CB Mappings
  ARM: dts: msm: Add video device to trinket
  ARM: dts: msm: Add dual display platform for sdmmagpie
  msm: vidc: Add support for trinket video device
  ARM: dts: msm: Add ATP platform support for sdmmagpie
  usb: dwc3-msm: Fix float cable detection
  ARM: dts: msm: Update extcon to NULL for rumi on Trinket
  defconfig: enable memlat governor for SDXPRAIRIE target
  ARM: dts: msm: Update name of PCIE_GDSC for sdxprairie
  msm: IPA: differentiate WDI2 and WDI3 over GSI
  ARM: dts: msm: set MDP transfer time property for nt36850 panel
  ARM: dts: msm: update DDR IB value for qcs405 and qcs403 target
  diag: dci: Validate dci client entries prior read
  soc: qcom: dcc_v2: Add support multiple link-lists
  ARM: dts: msm: Add vls_clamp_reg for TRINKET
  ARM: dts: msm: Add slimbus instances for trinket
  f2fs: fix use-after-free issue when accessing sbi->stat_info
  scsi: ufs: fix a race condition between err handler and clock gate work
  arm64: dts: rename device tree of qdrive to alcor
  msm: kgsl: Remove invalid HW CGC settings for A612
  ARM: dts: msm: update DMIC clock frequency in QCS405
  ARM: dts: msm: Take NOM clock frequency as per sw configuration
  ARM: dts: msm: wcss changes in coresight dtsi for SDMMAGPIE
  ARM: dts: msm Add TSENS support for trinket
  ARM: dts: msm: Add ADC thermistor support for trinket.
  clk: qcom: Move all seq_printf to use clock_debug_output macro
  ARM: dts: msm: fix minimum voltage value for L13A in sdmmagpie
  msm: camera: Fix invalid type conversion
  drm/bridge: use kmalloc to allocate i2c buffer
  msm: camera: isp: Fix invalid type conversion
  power: smb1390: enable device suspend
  msm: ipa: Load IPA uC via PIL for APQ setups
  ARM: dts: msm: Add mem_dump node for TRINKET
  ARM: dts: msm: Add display support sm6150 based trinket interposer
  ALSA: info: Protect list access of new entry
  power: smb5: fix term current configuration logic
  power: smb5-lib: add USBIN_OV de-bounce support
  power: smb5: fix USBIN-UV irq storm
  power: smb5: add support for die/connector temp based mitigation
  drivers: dma-removed: use relaxed memory attributes
  ARM: dts: msm: Add qpnp rtc device for PM6125
  clk: dt-bindings: Rename LPASS_NPA_RSC_ISLAND to fix compilation issue
  wil6210: use OEM MAC address from OTP
  msm: ipa3: increase uc-timeout value
  usb: gadget: ffs: Use local copy of descriptors for userspace copy
  cnss2: Disable PCIe bus master bit before save config space
  ARM: dts: msm: Specify battery configuration for trinket
  msm: camera: hyp: Support for Resource manager interface
  ARM: dts: msm: Add charger temp max configuration to pm6150
  ARM: dts: msm: sa6155: Enable power key pull up
  ARM: dts: msm: add support for trinket qrd
  msm: vidc: ensure codec count is in supported session range
  ARM: dts: msm: Add dpdm supply to dwc3-msm on SM6150/sdmmagpie/trinket
  ARM: dts: msm: Add jtagv8 devices for TRINKET
  ARM: dts: msm: Add dcc node for TRINKET
  ARM: dts: msm: Add coresight node for TRINKET
  msm: camera: isp: Support dual vfe sync
  soc: qcom: qdss_bridge: add check before free memory when remove
  Documentation: sound: add voice mhi documentation
  msm: camera: Correct driver removal operations for sensor modules
  msm: IPA: support WDI3 over GSI
  msm: camera: Change reset sequence for CSID
  ARM: msm: dts: Add reset clocks for sm8150
  ARM: dts: msm: Add UFS VCCQ2 voltage configuration support for SM6150
  scsi: ufs: obtain VCCQ2 voltage level from DT prior to hard code
  defconfig: Add host mode USB tethering support for trinket
  power: smb5: Fix USB input current reporting
  msm: ipa4: Fix channel state when GSI command times out
  ARM: dts: msm: Add IIO channels to pmi632 charger and qgauge
  ARM: dts: msm: Add ascent battery profile for trinket
  ARM: dts: msm: Increase Pre-emphasis value for QCS405 EVB1000
  msm:ipa4: Fix to return error if nat table memory already allocated
  arm: dts: Add bus voting and pm qos support for sdmmagpie
  iommu: arm-smmu: wait for writes to complete before power off
  ARM: dts: msm: Enable remotefs for trinket
  ARM: dts: msm: Update QUSB PHY parameters on sdmmagpie
  msm: arm64: remove print formatting warnings
  power_supply: add property to disable QC userspace optimizations
  power: qpnp-smb5: Configure ICL based on flash active state
  power: smb5: add support to enable/disable hvdcp optimization
  power: smb5-lib: fix adapter allowance for PMI632
  power: smb5: add legacy-cable detection logic
  usb: dwc3: gadget: Clear req->unaligned/zero flags on cleanup
  soc: qcom: use interruptible wait in cdsprm for rpmsg messages
  msm: arm64: drm/msm/sde: Use correct macro for comparison
  msm: arm64: remove warnings related to uninitialized variables
  power: smb1390-psy: Fix taper charge handling
  power: battery: Fix taper charge handling
  clk: qcom: gcc: Remove support of dcc_xo_clk and dcc_clk in qcs405
  usb: dwc3-msm: Fix maximum_speed determination
  msm: arm64: fix compiler warnings due to improper braces or indentation
  coresight: tpdm: restore mcmb pointer after memset
  ARM: dts: msm: Avoid PIL voting for MPSS_VDD line for SM8150+SDXPRAIRIE.
  soc: qcom: smp2p: Prevent suspend for threaded irq
  mhi: controller: qcom: always set 64bit dma mask
  mhi: core: add support for using pre-mapped buffers for data transfer
  mhi: dev: net_dev: remove pm_lock since it's not needed
  mhi: dev: net_dev: remove background worker thread for allocating memory
  mhi: dev: net_dev: remove processing fragmented buffers
  mhi: dev: net_dev: remove support for dynamically changing transfer size
  mhi: dev: net_dev: remove support for resetting channels
  soc: qcom: socinfo: Add new msm-id for sdxprairie target
  ARM: dts: msm: Update board-id and msm-id for sdxprairie target
  ARM: dts: msm: Specify AMOLED regulator device for SM8150 QRD
  defconfig: 8150: Enable AMOLED regulator driver
  regulator: Add qpnp-amoled regulator
  net: aquantia: smmu support via devicetree
  dt-bindings: regulator: Add qpnp-amoled driver bindings
  ais: add ais sensor control
  scsi: ufs: ice: propagate memeory allocation failure error
  defconfig: Enable CPU clock driver for sdxprairie
  ARM: dts: msm: Add charger temp max configuration to pm6150
  msm: arm64: remove return value related compiler bug fixes
  msm: camera: icp: KW work issue in ICP
  ARM: dts: msm: Fix JEITA configuaration of qg alium battery
  scsi: ufs: Avoid re-sending UFS link startup command
  eud: avoid suspend and resume callback race with EUD IRQ
  ARM: dts: msm: Add support for bat_therm for PMI632 on trinket
  iio: adc5: Add support for bat_therm on PMI632 on trinket
  ARM: dts: msm: Add support for trinket QRD platform
  msm: camera: sensor: Add check for overflow for sensor util
  dwc3-msm: reset hardware on bootup if cable not connected
  msm: ipa3: checking gsi intset value on clk-vote
  defconfig: Enable PIPE and VIRQ flags for OKL4
  drivers misc: add misc okl4 hypervisor drivers
  msm: camera: lrme: Check the HW state before access register
  soc: qcom: sysmon-qmi: Fix max qmi msg length
  clk: qcom: Add clock asynchronous resets to BCRs
  ARM: dts: msm: Add QUPV3 SE dt node for spi on trinket
  ARM: dts: msm: Add CDSP pil node for Trinket
  ARM: dts: msm: Add extcon for USB on trinket
  slim: slim-msm: Synchronize xfer operation and ISR
  msm: arm64: Fix header includes to remove compiler warnings
  kernel: power: qos: remove check for core isolation while cluster LPMs
  defconfig: msm: enable remote debugger driver on sm6150
  diag: Keep buffer busy when starting session in multi mode
  power: qpnp-qg: Add support for weighted capacity learning
  ARM: dts: msm: add support for sm6150-interposer-trinket-qrd
  power: qpnp-fg-gen4: Add support for weighted capacity learning
  msm: camera: Remove ion members from msm_frame structure definition
  defconfig: msm: disable PCIe MSI for sa6155
  defconfig: enable HDCP features for displayPort for trinket
  ARM: dts: msm: Add PWM device node for PM6125
  ARM: dts: msm: add remote debugger support
  ARM: dts: msm: Add entry for cx ipeak driver for sdmmagpie
  power: fg-alg: Loosen capacity learning qualification criterion
  ARM: dts: msm: move cnss node under soc node
  icnss: Reduce timeout for waiting response message from firmware
  drm/msm/dsi-staging: do not init ext bridge for dsi panel
  defconfig: sdxprairie: Enable charger and FG drivers
  ARM: dts: msm: Update PM8150B FG configuration for sdxprairie MTP
  ARM: dts: msm: Enable PM8150B on sdxprairie MTP
  power: smb5: Support disabling of USB-PD via DT
  power: smb5: Support HW-autonomous HVDCP operation
  dwc3-msm: Fix dwc3_drd_state_string for undefined state
  ARM: dts: msm: move MHI bus vote to PCIe1 node for sm8150-sdx50m
  power: smb5: initialize Type-C to DRP mode on boot
  msm: ipa3: add mhi state check after calling mhi-API
  mhi: core: provide helper function to check MHI device status
  mmc: sdhci-msm: Fix the retention of DLL regs from CX Collapse
  cnss2: Do not suspend/resume PCIe link during noirq stage
  ARM: msm: dts: Correct npu tcm io space for sdmmagpie
  atlantic-forwarding driver v1.0.15
  soc: qmi: dfc: fix dead loop in workqueue dfc_wq
  ARM: dts: msm: Configure APQ platform type for sm8150_sdxprairie
  arm64: dts: qdrive: Add device tree for qdrive
  Revert "ARM: dts: msm: Add SPI device nodes for QUPV3 for SA6155"
  msm: mdss: rgb: adding rgb interface driver for qcs405
  msm: ipa4: fix to update the channel state logic
  msm: ipa: Update IPA EP mapping for sm8150_sdx55 device
  ARM: dts: msm: Enable cx-ipeak support for sdmmagpie camera
  ARM: dts: msm: Update QoS priority for arm9 master for SDMMAGPIE
  ARM: dts: msm: Add SPS node for trinket
  pinctrl: qcom: Update pinctrl of trinket
  ARM: dts: msm: Add device tree for adp-air
  ARM: dts: qcom: Enable audio on qcs403 sku4
  power: smb5: Enable Rp based ICL for USB Type-C non-compliant cables
  clk: dt-bindings: Add support for Audio external PLL
  ARM: dts: msm: enable DFPS for rm69298 truly amoled panel on sdmmagpie
  ARM: dts: msm: Add mindidump id for mss subsystem on sdmmagpie
  soc: qcom: wda: fix ssr cleanup
  ARM: dts: msm: Update the APC TURBO ceiling voltage for QCS405
  ARM: dts: msm: Add support for CPU clock for SDXPRAIRIE
  clk: qcom: cpu: Add CPU clock driver for SDXPRAIRIE
  msm: gsi: Change user_data to support OOO completions
  msm: camera: ife: Adds bound checking for output resources
  power: smb5-lib: Fix SBUx resistance measurement in moisture detection
  power: smb5-lib: Fix no charging with Type-C legacy cable via PD adaptor
  msm: ipa: IPA coalescing data path changes
  msm: camera: Add cpas stop in case of notify secure mode failure
  msm: vidc: Add conditional check to avoid invalid access
  ARM: dts: msm: Add USB device tree changes for SA8155
  arm64: defconfig: Enable qrtr over FIFO driver for sm8150
  qrtr: Add FIFO based communication between VMs
  qrtr: Add support to read qrtr packet size
  msm: ipa4: fix to change the header address to u64
  microvisor: add resource_manager.h
  ARM: dts: msm: add NT36850 dsi panel and ext bridge lt9611 for HDK855
  msm: camera: Port msm-4.9 camera kernel on msm-4.14 kernel
  ARM: dts: msm: Update the min/max voltages for trinket regulators
  ARM: dts: msm: disable MST for Display Port on sdmmagpie
  Coresight: tmc: need alloc memory before enable tmc etr
  ARM: dts: msm: Remove qseecom_tz_apps_mem carveout
  arm64: Enable Arm64 858921 errata on kryo2xx gold cores
  mhi: dev: net_dev: remove debug stats from MHI net driver
  mhi: core: expand mhi_buf structure to describe additional bufferptr types
  dt-bindings: soc: qcom: dcc: delete the clk-enable property
  ARM: dts: msm: add support for td4330 truly panel
  msm: camera: reqmgr: Validate num links in link control
  ARM: dts: msm: Add audio nodes on sdxprairie
  msm: ipa: nullify mailbox struct after freeing
  power: qpnp-fg-gen4: Add support to configure battery thermistor interval
  diag: Increase the number of retries for MDM DCI
  ARM: dts: msm: Add qcom,hw-enable-check in tpdm dcc for QCS405
  dt-bindings: arm: coresight: Add qcom,hw-enable-check for tpdm
  coresight: tpdm: Add hw-enable-check when tpdm_probe
  ARM: dts: msm: add arm64-cpu-erp node for trinket
  defconfig: msm: Enable arm64 cortex edac support for trinket
  edac: cortex: Snapshot arm64 cortex-a cpu edac driver
  net: qrtr: usb: Add support for 90f3 PID
  defconfig: msm: Enable QRTR USB transport driver on SA6155
  net: qrtr: Handle IPCR control port format of older targets
  ARM: dts: msm: Disable tpdm west for SA6155
  ARM: dts: msm: Update regulator properties for icnss node for sm6125
  power: smb5: update VCONN control for PMI632 based platform
  power: smb5: Remove DC ICL configuration support for PMI632
  net: qrtr: Add support for USB transport
  usb: phy: Add module parameter for eud connected case
  usb: dwc3-msm: Ensure hardware is reset during role change
  msm: vidc: Update offset and size to optimize cache operations
  ARM: dts: msm: Enable thermal zone skin mitigations for SM6150 IDP
  Revert "clk: qcom: Remove enable_safe_config from UTMI clock for SDMMAGPIE"
  msm: camera: crm: Notify UMD on Error to preform recovery
  ARM: dts: msm: Enable eud clock voting for sm6150
  ARM: dts: msm: Enable eud clock voting for sdmmagpie
  ARM: dts: msm: Add USB support on sm6150-interposer-trinket
  soc: qcom: Add support for phy clock voting from eud
  ARM: dts: msm: enable gpio keys for QCS403 SSRD devices
  arch: arm64: Add midr values for kryo2xx big cores
  dma-buf: skip fd iteration for threads created with CLONE_FILES
  clk: qcom: gcc: Update clock flags for reference clk
  clk: qcom: vdd-level: Add support for vdd levels
  clk: qcom: alpha: Remove usage of pll->inited flag for Lucid
  mmc: cmdq_hci: Fix key index refcnt issue with metadata encryption
  power: qpnp-fg-gen4: Publish ESR SOH parameters only once during charging
  power: qpnp-fg-gen4: Allow delta MSOC/BSOC threshold configuration for 0.5%
  ARM: dts: msm: specify ADC channel for TEMP_ALARM devices on PM8150* PMICs
  ARM: dts: msm: enable display virtual driver
  cnss2: Fix un-initialized RDDM completion
  ARM: dts: msm: Delete extcon property on sdxprairie RUMI
  ARM: dts: msm: Add support for sm6150-pm6125-interposer-trinket
  msm: ipa: Add support for pdn in hal
  arm64: cputype: Add Kryo2xx series of the Gold and Silver CPU parts
  usb: dwc3-msm: Set HOST MODE flag before resume
  inet: frags: better deal with smp races
  soc: qcom: dcc_v2: remove clock support
  cpu/hotplug: Ensure that sched domains are rebuilt before hotplug
  ARM: dts: add pinctrl info and spi dev node
  ARM:dts:msm:Disable DCC clock for qcs405
  power: qos: Use effective affinity mask
  mhi: core: add support for reserve side coalesced (rsc) channels
  msm: pcie: fix potential dangling mutex in enumeration
  msm: ipa: Add support for IPA APQ platform type
  qseecom: listener unregister and register optimization
  dt-bindings: msm: Document "platform-type" attribute in qcom-ipa node
  trace: events: scm: Use correct size when copying argument buffer
  msm: camera: reqmgr: Remove kfree calls on link struct
  ARM: dts: msm: Flag for dynamic ib bw update for SM8150/sdmmagpie
  msm: camera: Add flag to dynamically update axi ib bw
  ARM: dts: msm: Update the USB regulators on TRINKET
  ARM: dts: msm: Configure cx ipeak for video for sm6150 and sdmmagpie
  ARM: dts: msm: Enable CX Ipeak support for sdmmagpie
  soc: qcom: Update Cx ipeak driver for multimedia clients
  msm: kgsl: Skip soft reset for A612 GPU
  ARM: dts: msm: fix video VA range for sm8150 and sdmmagpie
  soc: qcom: socinfo: Add support for SM8150P HDK soc-id
  ARM: dts: msm: Add QUPV3 SE dt nodes for uart on trinket
  ARM: dts: msm: add remote debugger support for sm6150
  ARM: dts: msm: Add LPASS pil node for Trinket
  ARM: dts: msm: Add tupwr-disable for SM8150, SM6150 and SDMMAGPIE
  coresight: etm: Add check of trace unit power property
  dt-bindings: arm: coresight: add trace unit power property
  defconfig: arm64: trinket: Update defconfig for trinket
  ARM: dts: msm: Add SPI device nodes for QUPV3 for SA6155
  soc: qcom: socinfo: Add soc information for SA6155P and SA6155
  defconfig: msm: Enable TSENS driver for sdxprairie
  ARM: dts: msm: Add TSENS nodes for sdxprairie
  defconfig: msm: Enable ADC5 PMIC driver for sdxprairie
  ARM: dts: msm: Add ADC channel nodes for sdxprairie
  msm: camera: flash: Moving flash off operation in stop dev ioctl
  ion: fix an incorrect pointer dereference
  iio: adc5: Add check for channel selection for PMI632
  msm: ipa4: add wigig client
  spi: spi-geni-qcom: Add spi slave mode support to QUPv3
  sched: remove duplicate initialization
  ARM: dts: msm: Add VADC and ADC_TM support for trinket
  ARM: dts: msm: Remove LLCC ECC interrupt for sdmmagpie
  ARM: dts: msm: Remove LLCC ECC interrupt for SM6150
  msm: ipa4: Fix to mask the global interrupt INT1
  ARM: dts: msm: Correct rpm_msg_ram size for trinket
  ARM: dts: msm: add synaptics touch support for SDMMAGPIE IDP
  ARM: dts: msm: Add energy costs for trinket
  soc: qcom: Create new ramdump device node for SSR minidump
  msm: kgsl: Reset ringbuffer pointers if CP INIT fails
  msm: ipa4: Increase the GSI command poll timeout to 10
  Coresight: remove mutex_trylock in coresight_abort
  scsi: ufs: fix scheduling while atomic
  ARM: dts: msm: Add support for dual display on sdmmagpie
  defconfig: Enable countermeasures
  ARM: dts: msm: Use LLCC as the bus-master for venus ddr
  power: qpnp-fg-gen4: Fix disabling mem_attn interrupt
  msm_11ad: remove msm PCIe shadow control
  sdxprairie_defconfig: Add BLSP UART driver in sdxprairie_defconfig
  ARM: dts: msm: add display panel support for sm8150-sdxprairie
  usb: dwc3-msm: add enum for drd_states to remove otg_state usage
  arm64: Enable repeat tlbi warkaround on Kryo4 CPUs
  ARM: dts: msm: add DB register address for sdxprairie
  power: smb1351: handle OTG detection during boot
  ARM: dts: msm: Add USB2.0 VBUS detection on QCS405 SSRD
  defconfig: Enable SPMI debugfs writes for qcs405
  msm: kgsl: Use correct GBIF settings for A612 GPU
  sched/walt: Fix stale max_capacity issue during CPU hotplug
  rpmsg: glink: Do not send to remote proc in reset
  ARM: dts: msm: Add cnss device nodes for sa6155
  msm: ipa4: Increase the TAG process timeout
  msm: kgsl: improve error logging in adreno_irq_handler
  ARM: dts: msm: Add support for UART dtsi on sdxprairie
  qcom-geni-se: Add IOMMU check in geni common driver
  ARM: dts: msm: Disable titan cti for SDMMAGPIE
  ARM: dts: msm: Update the clock entry for sdmmagpie
  sched/fair: fix imbalance calculations in misfit balancing
  msm: kgsl: Update expected GMU FW version for A618 GPU
  ARM: dts: msm: switch to RPMh controlled PMIC regulators for sdxprairie
  defconfig: arm64: Enable USB Link test and network drivers on sa8155
  llcc: Update SCT table entries for sm6150
  genirq: Honour IRQ's affinity hint during migration
  msm: vidc: Update device clock after cx ipeak logic
  ARM: dts: msm: Increase WLAN carveout region on sdmmagpie
  ARM: dts: msm: Increase WLAN carveout region on sm6150
  soc: qcom: ramdump: Synchronize dump reading for multiple readers
  ARM: dts: msm: Update GCC_UFS_PHY_AXI_CLK rate for sdmmagpie and sm6150
  ARM: dts: msm: Add CDSP and HVX thermal cooling devices to SM6150
  sched/fair: Improve the scheduler
  ARM: dts: msm: Enable generic I2C SE on SA6155
  Linux 4.14.83
  ARM: dts: r8a7793: Correct critical CPU temperature
  ARM: dts: r8a7791: Correct critical CPU temperature
  Revert "x86/speculation: Enable cross-hyperthread spectre v2 STIBP mitigation"
  inet: frags: better deal with smp races
  usbnet: smsc95xx: disable carrier check while suspending
  net: smsc95xx: Fix MTU range
  mlxsw: spectrum: Fix IP2ME CPU policer configuration
  sctp: not increase stream's incnt before sending addstrm_in request
  net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs
  sctp: fix strchange_flags name for Stream Change Event
  net: dsa: microchip: initialize mutex before use
  net: qualcomm: rmnet: Fix incorrect assignment of real_dev
  net: systemport: Protect stop from timeout
  tuntap: fix multiqueue rx
  tg3: Add PHY reset for 5717/5719/5720 in change ring and flow control paths
  sctp: not allow to set asoc prsctp_enable by sockopt
  net-gro: reset skb->pkt_type in napi_reuse_skb()
  ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRF
  ip_tunnel: don't force DF when MTU is locked
  ibmvnic: fix accelerated VLAN handling
  flow_dissector: do not dissect l4 ports for fragments
  drm/msm-hyp: check against update config flag
  drm/msm-hyp: virtual msm display driver
  ARM: dts: msm: Enable LLC for SM6150 GPU
  qcom-geni-se: Add debug logs for bus voting

Conflicts:
	arch/arm64/boot/dts/qcom/sdmmagpie-sde-display.dtsi
	arch/arm64/boot/dts/qcom/sdxprairie-pinctrl.dtsi
	drivers/platform/msm/gsi/gsi.c
	drivers/platform/msm/ipa/ipa_v3/ipa_i.h
	drivers/usb/dwc3/dwc3-msm.c
	drivers/usb/phy/phy-msm-qusb.c
	net/ipv4/inet_fragment.c
	net/qrtr/Kconfig
	net/qrtr/Makefile
	net/qrtr/fifo.c

Change-Id: I692e2cacb8f8d00b33c0eebd98d355ab1f480d19
Signed-off-by: Rohith Palakurthi <prohit@codeaurora.org>