DOWNSTREAM commit '906ec760' from AU409 into msm-4.14-display

* commit '906ec760':
  usb: pd: Streamline sending hard reset
  usb: pd: Update PE_SNK_WAIT_FOR_CAPABILITIES state correctly
  usb: pd: Add stricter checking for handling VDM responses
  usb: dwc3: request 2mA VBUS current when suspending
  clk: qcom: Remove enable_safe_config from UTMI clock for SDMMAGPIE
  ARM: dts: msm: Add secondary USB configuration for HDK8150
  msm: sps: Destroy debug log during BAM deregistration
  platform: qpnp-revid: Add REVID support for PM6125
  ARM: dts: msm: Add configurability support to pm6150 charger/qg
  ARM: dts: msm: add hbtp support for HDK8150
  usb: gadget: composite: fill bcdUSB as 0x0320 for SuperSpeed or higher speeds
  dt-bindings: mhi: make bus scale voting optional
  mhi: controller: qcom: make bus scale bw optional
  platform: qpnp-revid: Add REVID support for PM8150A/PME9205
  msm: npu: misc error fixes
  msm: npu: Correct mapped npu mem size
  ARM: dts: msm: update charger configuration for SDMMAGPIE IDP/QRD
  ARM: dts: msm: Include rpm-regulator header in trinket regulator files
  iommu: Fix multiple definitions of msm_dma_unmap_sg_attrs
  ARM: dts: msm: Add PM6125 peripherals for trinket
  ARM: dts: msm: Add snapshot of PMI632 peripherals for trinket
  ARM: dts: msm: add SPMI PMIC arbiter device for trinket
  usb: misc: Fix redriver chipset disable issue for DP only cable
  ARM: dts: msm: Add couple of new variant device tree support on qcs405
  ARM: dts: msm: add smmu devices for trinket
  msm: adsprpc: Add additional debugfs data & change naming convention.
  ARM: dts: msm: Add sensor clock controller device for SA6155/SA6155p
  clk: qcom: Add sensor clock controller driver for SM6150
  msm-4.14: Fix build error
  sched: fair: fix compilation issues for cfs_bandwidth enabled
  power: smb5-lib: fix SMB EN override  handling
  dt-bindings: mhi: remove tsync fields as no longer needed in device tree
  kernel: time: Add delay after cpu_relax() in tight loops
  arm64: Add padding to thread_info structure
  linux: rmnet: add RMNET IOCTL for Coalescing
  msm: ipa: IPA coalescing changes
  msm: ipa: GSI coalescing changes
  msm: ipa: Checksum validation changes
  msm: ADSPRPC: Handle map and unmap in 32 bit images
  defconfig: msm: disable panic on correctable errors
  msm: ipa4: adapt new IPA uC command format
  msm: ipa4: remove deprecated code
  usb: pd: update PHY roles immediately after DR_Swap
  usb: pd: Send Not_Supported in specific cases
  arm: dts: msm: Update USB QMP UNI PHY settings for sm8150 v2
  usb: phy: qmp: Remove writing of CDR_RESET_TIME register
  arm: dts: msm: Update USB QMP DP PHY settings to v1.02 for sm8150 v2
  msm: ipa: generic uC loaded event notifier support
  thermal: tsens: Correct sensor calibration for QCS405
  power: smb5: add support to disable suspend on collapse feature
  mmc: card: Add explicit checks for secure-discard requests
  ARM: dts: msm: change power supply entries for sim panels on sdmmagpie
  ARM: dts: msm: update energy costs for SDMMAGPIE
  defconfig: Enable CONFIG_BALANCE_ANON_FILE_RECLAIM for sdmsteppe
  mm: do not shrink pages marked for reclaim by MADV_FREE
  ARM: dts: msm: Change power-source for cam_reset GPIOs
  ARM: dts: msm: Add qrng node for sdxprairie
  ARM: dts: msm: Add device tree for sa8155 virtual machine
  mmc: core: Update target-frequency while resuming clock scaling
  ARM: dts: msm: Add max codec aux devs property for sm6150
  defconfig: msm: Add defconfigs for sdmsteppe auto
  dma-buf: Remove dmabuf from db_list before releasing
  ARM: dts: msm: Specify NOMINAL bus vote for sdmmagpie
  ARM: dts: msm: Add ion secure carveout for sdmmagpie
  ARM: dts: msm: update memorymap for sdmmagpie
  Revert "diag: Set buffer to NULL after freeing from mempool"
  ARM: dts: msm: Allow pm_suspend in host mode for SA6155
  msm: GSI: check INTSET is in irq mode for GPI channels
  defconfig: Enable OKL4_GUEST flag
  vservices: Fix LLVM compilation errors for vservice drivers
  block: vservices: fix client and server to work for UFS
  drivers misc: add okl4-link-shbuf driver
  vservices: block: Port virtual block drivers to 4.14
  vservices: block: add the block protocol and drivers
  vservices: serial: Add the serial protocol and drivers
  vservices: transport: Port transport vservice driver to linux 4.14
  vservices: add the axon transport driver
  vservices: core: Port core vservices drivers to linux 4.14
  driver: vservices: Add the vservices framework and core
  drivers tty: add okl4_vtty driver
  tty: flush linux local echo buffer
  drivers char: add okl4_pipe driver
  aarch64: add core okl4 hypervisor config
  microvisor: add microvisor system headers
  mhi: core: add time synchronization feature support
  msm: npu: Adjust timing to send notification to DSP
  msm: npu: Add debug information for mapped memory
  defconfig: sdxprairie: Enable subsystem firmware loader support
  ARM: dts: msm: Add modem PIL node for sdxprairie
  ARM: dts: msm: Add imem node for sdxprairie
  ARM: dts: msm: Add the 499.2 Mhz GPU power level for sm8150 v2
  dt-bindings: regulator: rpmh-regulator: add SVS_L2 voltage level
  ARM: dts: msm: Correct the platform subtype for SM8150+SDXPRAIRIE
  msm: npu: Unload networks when driver handle is closed
  ARM: dts: msm: Suspend USB input for debug battery in SM8150 platforms
  diag: Avoid race while closing and opening mhi channels
  mhi: controller: qcom: added support to dynamically switch L1 configuration
  ARM: dts: msm: Update voltage restriction sensor for sm8150
  thermal: tsens: Use the new threshold notification API
  drivers: thermal: Evaluate based on trip temperature
  msm: kgsl: Add a property to query gpu speed bin
  drivers: pinctrl: qcom: Correctly set up gpio0 irq_data
  iommu: Fix compilation errors when !CONFIG_QCOM_LAZY_MAPPING
  msm: ipa3: Changes made to mitigate OUT_OF_BUFEER error
  ARM: dts: msm: Change cci device for camera node
  ARM: dts: msm: Add camera node in sm8150 hdk platform
  ARM: dts: msm: Enable upscaling on Sharp Dual DSI panel on sdmmagpie
  defconfig: sdxprairie: Enable qrng driver
  ARM: dts: msm: Update USB HS PHY parameters for QRD7150
  ARM: dts: msm: Remove ref_clk for QUSB PHY for SM6150
  usb: phy: Make ref_clk optional for driver probe success
  ARM: dts: msm: enable Display Port driver for sdmmagpie
  soc: qcom: Add support for HAB
  mhi: core: change link level lpm functions to return a code
  msm: gsi: fix WDI3 and GCI protocol numbers
  mtd: msm_qpic_nand: Add new register changes for QPIC 2.0
  mtd: msm_qpic_nand: Add new BAM Pipe configuration changes
  ARM: dts: msm: Add Qpic Nand support for sdxprairie
  msm:ipa: Fix memleak issue
  socinfo: Add support for ADP AIR platform
  ARM: dts: msm: Add OPP handle for gmu clock for sdmmagpie
  ARM: dts: msm: Add OPP handle for gpu clock for sdmmagpie
  ARM: dts: msm: Enable GPU thermal zone mitigation for SDMMAGPIE
  ARM: dts: msm: Add GPU properties for sdmmagpie
  defconfig: msm: Add defconfigs for Quin GVM
  defconfig: Enable NAND related configs for sdxprairie
  hwrng: Add no-clock-support in msm_rng
  defconfig: arm: enable devbw for sdxprairie
  ARM: dts: msm: add snoc/pcnoc/ddr keepalive governor for sdxprairie
  udp: fix jump label misuse
  udp: cope with UDP GRO packet misdirection
  ipv6: factor out protocol delivery helper
  ip: factor out protocol delivery helper
  udp: add support for UDP_GRO cmsg
  udp: implement GRO for plain UDP sockets.
  udp: implement complete book-keeping for encap_needed
  udp: Do not copy destructor if one is not present
  udp: Add support for software checksum and GSO_PARTIAL with GSO offload
  udp: Partially unroll handling of first segment and last segment
  udp: Do not pass checksum as a parameter to GSO segmentation
  udp: Do not pass MSS as parameter to GSO segmentation
  ARM: dts: msm: update the LMH thresholds for sm8150
  power: smb5: Add die temp to regulate ICL on RST threshold
  ARM: dts: msm: Enable CX IPeak cdev and thermal zone for SDMMAGPIE
  ARM: dts: msm: Add thermal zone config for NPU in SDMMAGPIE
  defconfig: Enable cnss_genl driver compilation
  ARM: dts: msm: specify start iova address for sm6150
  ARM: dts: msm: Add OPP handle for powersave governor for sdmmagpie
  lowmemorykiller: enable oom reaper on a lmk killed process by default
  defconfig: qcs405: enable iommu debug tracking in perf config
  ARM: dts: msm: Add keep alive bw voter for SM6150
  ARM: dts: msm: Add camera
  usb: xhci: Remove usb_phy get phandle from xhci_plat_probe
  NFC: Fix for nq-nci dev node recovery
  HID: uhid: Remove the redundant reference counting for open/close
  f2fs: avoid wrong decrypted data from disk
  power: smb5: Fix ICL setting on Type-C/PD compliance failure
  msm: ipa3: Remove obsolete open_aggr_frame_wa check
  f2fs: submit cached bio to avoid endless PageWriteback
  Revert "msm: vidc: Confirgure work mode 2 based on rate control"
  ARM: dts: msm: update JEITA thresholds for batteries on 8150 platforms
  power: smb5-lib: Fix charger reverse boost on soft JEITA
  clk: qcom: videocc: Add support to read efuse for video clock
  thermal: qcom-spmi-temp-alarm: correct IRQ triggering for GEN2 peripherals
  mhi: controller: qcom: add support to capture local SoC time
  mhi: core: fix returning incorrect code when entering rddm mode
  mhi: core: ensure MHI is active while processing mission mode
  ARM: dts: msm: enable PM QoS for rotator path for sdmmagpie
  drm/msm: make msm_drm.h uapi header safe for C++
  ARM: dts: msm: Add support for USB type C audio in sdmmagpie
  usb: misc: Add support for dynamic switching of redriver channel parameters
  ARM: configs: enable QUPv3 serial engine 7 on sm6150
  scsi: ufs: Add new debugfs entry to crash on ufs error
  media: rc: GENI-IR controller driver
  defconfig: msm: Enable CONFIG_FAIL_MMC_REQUEST for sdmsteppe
  mmc: cmdq_hci: Add cmdq-error injection framework
  mmc: mmc: Remove suspend/resume clk-scaling logic from mmc_reset
  mmc: Fix err-handling path when there is active Discard (DCMD)
  mmc: cmdq_hci: Do not handle other requests in case of error.
  mmc: block: Wake up if anyone is waiting on queue_empty_wq
  power: qpnp-smb5: Reverse the sign of CURRENT_NOW
  power: qpnp-qg: Update the ESR mod-count for PM6150
  ARM: dts: msm: Defer regulator disable for sdmmagpie GPU SMMU
  msm: ADSPRPC: Share context bank with multiple sids
  ARM: dts: msm: Support for dummy GCC/RPMH/AOP clocks for sdxprairie RUMI
  mmc: CMDQ Error handling context syncronization
  arm64: Kconfig: Enable support for guest virtual platform
  mhi: devices: uci: release lock as last step
  thermal: tsens: Mask tsens interrupt in IRQ handler
  AndroidKernel: Explicitly mark certain targets as phony
  usb: pd: Fix memory leak in usbpd_create()
  net: qualcomm: rmnet: Fix use after free in uplink aggregation
  ARM: dts: msm: update gpio for pcm/tdm intf for auto platform
  usb: gadget: f_fs: Support multi-instance IPC logging
  ARM: dts: msm: Add modem1 sensors to sm8150
  drivers: thermal: qmi_sensor: Add new qmi sensors
  defconfig: msm: enable SLPI pinctrl driver for SM6150
  Revert "ipv6: defrag: drop non-last frags smaller than min mtu"
  msm: netfilter: NATTYPE Refresh Timer Changes
  security: pfe: Use non blocking scm call
  msm: netfilter: NATTYPE Refresh Timer Changes.
  ARM: dts: msm: Add SLPI pinctrl for SM6150
  Support full CONE NAT and ADDRESS RESTRICTED CONE NAT
  net: qrtr: Allow Root guid process to bind
  ARM: dts: msm: Enable support for secure eud in sdmmagpie
  msm: vidc: Add fuse details of 4k30 sku for sdmmagpie
  msm: npu: Support cx ipeak limit management
  ARM: dts: msm: Enable cx ipeak limit management for npu on sm8150
  defconfig: trinket: Add initial defconfig for Trinket
  ARM: dts: msm: Add SPI config regs base address for trinket
  ARM: dts: msm: Change SMB1390 IRQ type configuration
  power: battery: Modify main charger max FCC limiting logic
  power: smb5: Allow configuration of fcc slewing
  power: smb1390-psy: Allow taper exit if increase in float voltage
  ARM: dts: msm: Add PM6125 rpm regulator devices for trinket
  defconfig: qcs405: enable ebtable configuration.
  ARM: dts: msm: Enable HVX thermal zone mitigation for SM8150
  defconfig: Enable MSM_RPM_SMD support
  ARM: dts: msm: Add rpm-smd node for trinket
  ARM: dts: msm: Update skin thermal zone mitigation for SM6150
  ARM: dts: msm: Update thermal zone mitigation for all CX TSENS for SM6150
  ARM: dts: msm: Update TSENS userspace thermal zone rules for SM6150
  power: smb5: Modify SMB1390 temperature read mechanism
  power: smb1390-psy: Modify ILIM votable callback
  power: smb1351: disable watchdog timer
  mmc: block: Change mmc_cmdq_wait_for_small_sector_read func
  mmc: core: Change wait events to timeout types
  msm: ipa: remove obsolete RG10 workaround
  defconfig: enable cpufreq and devfreq driver for qcs405 32 bit
  PM / devfreq: bw_hwmon: use unsigned parameter for bytes_to_mbps
  soc: qom: add support to export socinfo_get_version
  ARM: Fix RTIC MPGen failure for 32bit target
  Revert "ARM: dts: msm: add remote debugger support for sm6150"
  mm: Using init_mm in apply_to_page_range() if addr >= PAGE_OFFSET
  ARM: dts: msm: updates for voting LPASS NPA resource
  platform: msm: qcom-geni-se: Add support for 32-bit kernel
  Revert "ARM: dts: msm: Add RX3 clock for SS QMP PHY"
  pinctrl: qcom: spmi-gpio: Correct GPIO strength dumping
  clk: qcom: Update ENABLE register address for USB3 clocks
  net: qualcomm: rmnet: Fix incorrect assignment of real_dev
  ARM: dts: msm: Enable QoS programming for SDMMAGPIE
  ARM: dts: msm: Add proxy client node for SDMMAGPIE
  msm: vidc: Rate limit frequently occurring error logs
  clk: qcom: gdsc: Remove global mutex lock in enable/disable callbacks
  ARM: dts: msm: Update clock entries for sm6150
  rtc: qpnp-rtc: Read ALARM_EN and update to alarm enabled status
  ARM: dts: msm: Add crypto device nodes for sdxprairie
  msm: kgsl: Correct CX vote for A618 GPU
  msm: gsi: configure GSI CNTXT_MSI_BASE reg
  mm/usercopy: Use memory range to be accessed for wraparound check
  ARM: dts: msm: Increase PMIC register dump size on SM8150
  soc: qcom: dfc: Allocate the query grant structures on heap
  usb: pd: Implement Source_Caps_Extended and Battery messages
  usb: pd: qpnp-pdphy: Fix reception of Get_Battery_Cap
  usb: pd: Fully support PD 3.0 as dual-role
  usb: pd: Don't retry sending Source Capabilities if PD capable
  usb: pd: Abort TX upon late RX
  usb: pd: Respond NAK to Discover Identity
  usb: pd: Decrease FIRST_SOURCE_CAP_TIME to 100ms
  usb: pd: Fix SOP' message header
  nl80211: Add flags to enable certain scan behavior
  defconfig: Enable PANIC_ON_DATA_CORRUPTION on SM8150
  debug-pagealloc: Panic on pagealloc corruption
  kernel/lib: add additional debug capabilities for data corruption
  usb: pd: Handle APSD detection during initial connection
  wil6210: fix locking in wmi_call
  wil6210: fix freeing of rx buffers in EDMA mode
  wil6210: remove unnecessary alignment code from rx flow
  wil6210: fix debugfs memory access alignment
  wil6210: notify cqm packet loss on disable_ap_sme
  wil6210: refactor disconnect flow
  wil6210: fix memory leak in wil_find_tx_bcast_2
  wil6210: add recovery for FW error while in AP mode
  wil6210: make sure Rx ring sizes are correlated
  wil6210: remove fake support for RXHASH
  wil6210: check null pointer in _wil_cfg80211_merge_extra_ies
  ARM: dts: msm: remove mdss gdsc entry for sdmmagpie
  ufs: qcom: set load before setting voltage in regulator
  scsi: ufs: set load before setting voltage in regulators
  ARM: dts: msm: Add audio overlay support for APQ SM6150P variant
  defconfig: qcs405: Enable reading of virtual timer from userspace
  power: step-chg-jeita: Allow JEITA ARB workaround configurable
  ARM: dts: msm: Add extcon phandle for usb_qmp_dp_phy for sdmmagpie
  ARM: dts: msm: Add device tree support for SSRD variant
  msm: ipa3: Reduced excessive logs from ipa3 function
  ARM: dts: msm: Remove undeclared PHY nodes for TRINKET
  defconfig: qcs405: Enable gpio key driver for qcs405
  msm: ipa: rmnet_ipa: Fix to decrement the client upon disconenct
  msm: ipa3: Reduced excessive logs from ipa
  clk: qcom: gpucc: Support frequencies for gfx3d clock
  arm64: Remove ECC check in do_bad
  defconfig: qcs405: Enable cdsp loader for 32-bit QCS405 perf config
  power: qpnp-qg: Add support for step-charging support in TTF
  ARM: dts: msm: Add compute priority mode and cooling devices in sm8150
  ARM: dts: msm: change the backlight max level to 1023
  msm: vidc: support setting bitrate savings
  msm: ipa4: Fix to disable the napi when rmnet ipa interface going down
  USB: dwc3: gadget.c: Use dev_err_ratelimit in ep_queue()
  soc:qcom: CDSPRM module update for SM8150 cx ipeak limit management
  ARM: dts: msm: add remote debugger support for sm6150
  ARM: dts: msm: Add support for wake up interrupt in sdmmagpie
  power: qcom: smb5-lib: Update charging status for handling Qnovo
  usb: f_qdss: Reset debug_inface_enabled flag upon driver unbind
  ARM: dts: msm: Add camera configs for automotive air
  usb: dwc3: Increase the inter packet gap for USB 2.0
  ARM: dts: msm: Update modem mitigation device name for sm8150
  qcs405_defconfig: Enable the smcinvoke driver
  ARM64: dts: msm: Add the smcinvoke dt node for qcs405
  ARM64: dts: msm: Increase the TZ apps region size
  pfk: clean up code to remove keymaster calls
  msm: kgsl: Add a feature ADRENO_PERFCTRL_RETAIN
  ARM: dts: msm: Add device tree files for trinket IDP platform
  defconfig: Disable qti-can driver for SDM6155
  ARM: dts: msm: Enable deep pre-fetch on apps smmu for sdmmagpie
  ARM: dts: msm: Add dts support for sm8150p HDK devices
  ARM: dts: msm: Add initial dts support for sm8150 HDK devices
  ARM: dts: msm: Assign PDC interrupt for ss_phy_irq for SM6150
  diag: Add IOCTL support to query ODL session PID
  defconfig: arm64: trinket: Enable Gladiator reporting driver
  ARM: dts: msm: Add gladiator support for trinket
  leds: qpnp-flash-v2: Disable the safety timer by default
  dma-buf: Use task_lock instead of taking reference to file_struct
  power: qpnp-fg-gen4: Get charge pump enable status for ESR FCC config
  power: qpnp-qnovo5: Remove qnovo5_update_status()
  power: battery: Fix error handling in votables' creation
  ARM: dts: msm: Disable ATOS for apps and kgsl smmu for sm8150
  msm: pcie: remove QGIC MSI support
  defconfig: msm: enable PCIe MSI for all chipset that support QGIC
  ARM: dts: msm: add devicetree node for PCIe MSI controller for sm8150
  msm: ipa: Update IPA4.5 endpoints mappings
  ARM: dts: msm: fix IPA register region size for sdxprairie
  soc: qcom: spcom: fix unlock ion buffer
  power: smb5: Fix BC1.2 compliance failure
  wil6210: fix reset flow for Talyn-mb
  ARM: dts: msm: add fpc1028 dtsi config for sdmmagpie
  msm: npu: Limit maximum power level based on fuse register setting
  input: qpnp-power-on: refactor the qpnp-power-on driver
  input: qpnp-power-on: remove unconditional S3 reset configuration
  msm: msm_bus: skip visited endpoint nodes
  ion: Support CMA heap with dma region using size property
  dma-coherent: Expose device base address and size
  ion: Don't create a kernel mapping in begin_cpu_access
  soc: qcom: dfc: add query after existing powersave mode
  ARM: dts: msm: add apps rsc mbox for sdxprairie
  dwc3-msm: Don't unmap IPA GSI channel related doorbell register mapping
  msm: ipa4: fix to update the ODL DPL consumer endpoints
  power: qpnp-qg: Fix the check in PON SOC calculation
  ARM: dts: Add lower bus speed support for sdmmagpie
  msm: ipa4: Fix to remove reset with open aggregation frame WA calling
  mtd: nand: Add the missing ids in nand id table.
  msm: mdss: delay overlay start until first update for external
  arm64: Enable PAN emulation
  msm: camera: icp: Change icp over clock threshold to 5
  ARM: dts: msm: Add quirks to disable auto suspend of QUSB PHY for SM6150
  msm:ipa3: Fix to reset clk state after before powerup SSR event
  ARM: dts: msm: Disable USB3 on QCS405 RCM platform
  pinctrl: sdmmagpie: update gpio, function and group binding
  scsi: ufs: enable hibern8 during clk gating
  msm: kgsl: Enable L1A preemption level for A608
  msm: vidc: refine firmware cycle calculation
  ARM: dts: msm: add initial MHI devicetree node for sm8150-sdxprairie
  ARM: dts: msm: add TZ-log driver for sdxprairie
  msm: kgsl: Fix null pointer dereference in hfi
  mm: don't do swap readahead during speculative page fault
  soc: qcom: qdss_bridge: Add spin_lock for accessing lists
  arm64: fix erroneous warnings in page freeing functions
  arm64: Implement page table free interfaces
  arm64: tlbflush: Introduce __flush_tlb_kernel_pgtable
  arm64: tlbflush: avoid writing RES0 bits
  arm64: Make sure permission updates happen for pmd/pud
  arm64: Enforce BBM for huge IO/VMAP mappings
  msm: camera: lrme: unlock mutex in error condition
  net: qualcomm: rmnet: Do not clone UDP and command packets
  soc: qcom: mem-offline: Set offlinable region based on minimum DDR sizes
  ARM: dts: msm: Add USB configuration on sdxprairie
  qseecom: set rcv_req_flag to 0 when listener is just registered
  msm: camera: icp: Send only required core info as part of PC
  ARM: dts: msm: Enable IPE/BPS PC for SM8150
  msm: ipa3: enable GSI_MULTI_AXI_MASTERS_DIS
  msm: camera: isp: Change log type to debug in cid reserve
  msm: camera: isp: Move label to correct error request id
  Revert "msm: camera: Prevents uninitialize read of error_request_id"
  power: qcom: smb1355: Fix writing to SID register
  ARM: dts: msm: Add vreg property in npu power level nodes
  drivers: net: rmnet: Fix qmi work cleanup
  ARM: dts: msm: Update NPU for BWMON and QFPROM info for sdmmagpie
  HID: Filtering mag data depending on timestamp
  msm: kgsl: Fix typo in ctxt_type_table traversal length
  ARM: dts: msm: Move snoc_cnoc_keepalive node for SDMMAGPIE
  ARM: dts: msm: Update class-H swr channels to 1
  clk: qcom: dispcc: Add 172MHz frequency support for SDMMAGPIE
  ARM: dts: msm: Enable ICP power collapse
  msm: camera: icp: Add feature flag for power collapse
  msm: camera: Enable power collapse feature flag
  slimbus: slim-msm: Handle system suspend while active slimbus transfers
  ARM: dts: msm: Correct port of funnel modem for SDMMAGPIE
  spi: spi-geni-qcom: Calculate FIFO size as per word length
  diag: Set buffer to NULL after freeing from mempool
  msm: kgsl: Halt RGMU execution before dumping snapshot
  ARM: dts: msm: Add re-driver channel parameters for DP
  ARM: dts: msm: Add quirks to disable auto suspend of QUSB PHY for sdmmagpie
  msm: mdss: Add fence support on SPI display
  msm: ipa: rmnet_ipa: Fix array out of bounds
  msm: ipa: gsb: Validate iface handle
  msm: ipa: gsb: Protect mutual exclusive memory
  defconfig: sdmsteppe: Enable CONFIG_FILE_TABLE_DEBUG
  ARM: dts: msm: Add support for USB on TRINKET
  ARM: dts: msm: Update bus interconnect topology for SDMMAGPIE
  ARM: dts: msm: Add GDSC and dummy clocks support for Trinket
  clk: qcom: Enable Cloick Ramp Controller(CRC) for GFX3D clock for SM6150
  ARM: dts: msm: Update value of QUSB2PHY_PORT_TUNE1 for SM6150
  msm: camera: isp: Remove recurrent mutex lock call
  net: qrtr: Move rx worker to separate worker thread
  ARM: dts: msm: add SMMU support for PCIe device nodes for sa6155
  diag: Add protection while accessing socket info's handle
  ARM: dts: msm: enable AHB2PHY_WEST clock during DP PLL programming
  msm: camera: icp: Add check for number of IN/OUT entries
  msm: phy: Re-enable phy intr after phy reset on max idle err cnt
  usb: xhci: Power up/down SS phy upon bus suspend/resume
  usb: phy-msm-ssusb-qmp: Improve msm_ssphy_qmp_powerup API
  net: qrtr: Rearrange tx wait and protect critical section
  net: qrtr: Make servers multi state ports
  soc: soc-core: add locked version of soc_find_component
  ARM: dts: msm: add extcon pdphy to sde_dp for sm8150
  ARM: dts: msm: Add NFC device node for sdmmagpie
  msm: camera: sensor: Add lock procetion for pinctrl operation
  slimbus-msm: Do IOMMU detach as part of power up
  ARM: dts: msm: Correct orientation for rear camera sensors
  ARM: dts: msm: Update the entries for sdmmagpie
  ARM: dts: msm: Use SMR mask instead of absolute SID values in DT
  ARM: dts: Include camcc related header file
  msm: gsi: add 11ad protocol support
  msm: camera: Prevents uninitialize read of error_request_id
  defconfig: msm: Enable branch predictor hardening on sm6150
  msm: camera: core: Avoid spinlock recusion
  msm: camera: sensor: Adjust pinctrl control flow
  ARM: dts: msm: Update JPEG clock value to turbo on SM6150
  msm: camera: Do not initialte flush call in init state
  rpmsg: glink: spi: Reduce tx sleep
  rpmsg: glink: spi: Ensure rx_done is sent before data
  msm: ipa3: Fix to retry when NTN cons/prod stop fails
  msm: vidc: fix line buffer bw voting for ar50
  ARM: dts: msm: Correct ldo voltages as per new regulator changes
  msm: camera: isp: Add wait_list dump support during pagefault
  ARM: dts: msm: Add battery profile for sdmmagpie
  ARM: dts: msm: Remove support for PCIE TBU from SDMMAGPIE
  msm: camera: sensor: Correct power down operation in shutdown
  ARM: dts: msm: Add CSIPHY0 clk to CSIPHY1/2/3
  msm: cam: isp: Add ubwc support for sdmmagpie ife
  msm: camera: ife: Adds bound checking for output resources
  ion: use unbounded wq for prefetch work
  spi: spi-geni-qcom: Fix slab out of bounds error
  msm: camera: cpas: Add support for sdmmagpie cpas
  HID: Adding new vendor id for QVR support
  msm: kgsl: create sysfs entries to expose memory usage
  Revert "arm: dma-mapping: WARN_ON if iova is not 128M aligned"
  msm: camera: ife: Reset hw clk rate in init hw
  msm: kgsl: Allow all oob requests in rGMU
  msm: camera: smmu: Fix uninitialized read of region in SMMU
  qseecom: fix a request_firmware issue
  msm: camera: fd: Add mutex protection to frame done processing
  msm: camera: core: Add info logs in node ioctl
  defconfig: Enable branch predictor hardening on sm8150
  arm64: Enable branch predictor hardening on kryo4xx gold cores
  arm64: Add MIDR values for kryo4xx gold cores
  msm: kgsl: Use correct log type for "Unused context label" message
  Revert "mm: don't show nr_indirectly_reclaimable in /proc/vmstat"
  msm: camera: isp: Select epoch config based on Hardware
  Linux 4.14.78
  IB/hfi1: Fix destroy_qp hang after a link down
  i2c: rcar: handle RXDMA HW behaviour on Gen3
  drm/i915/glk: Add Quirk for GLK NUC HDMI port issues.
  mm: disallow mappings that conflict for devm_memremap_pages()
  staging: ccree: check DMA pool buf !NULL before free
  drm/i915: Nuke the LVDS lid notifier
  HID: quirks: fix support for Apple Magic Keyboards
  ARC: build: Don't set CROSS_COMPILE in arch's Makefile
  ARC: build: Get rid of toolchain check
  mremap: properly flush TLB before releasing the page
  Revert "vfs: fix freeze protection in mnt_want_write_file() for overlayfs"
  powerpc/lib/feature-fixups: use raw_patch_instruction()
  iommu/amd: Return devid as alias for ACPI HID devices
  powerpc/tm: Avoid possible userspace r1 corruption on reclaim
  powerpc/tm: Fix userspace r13 corruption
  clocksource/drivers/fttmr010: Fix set_next_event handler
  net/mlx4: Use cpumask_available for eq->affinity_mask
  scsi: sd: don't crash the host on invalid commands
  scsi: ipr: System hung while dlpar adding primary ipr adapter back
  drm: mali-dp: Call drm_crtc_vblank_reset on device init
  PCI: dwc: Fix scheduling while atomic issues
  ravb: do not write 1 to reserved bits
  net: emac: fix fixed-link setup for the RTL8363SB switch
  Input: atakbd - fix Atari CapsLock behaviour
  Input: atakbd - fix Atari keymap
  intel_th: pci: Add Ice Lake PCH support
  scsi: ibmvscsis: Ensure partition name is properly NUL terminated
  scsi: ibmvscsis: Fix a stringop-overflow warning
  clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs
  batman-adv: fix hardif_neigh refcount on queue_work() failure
  batman-adv: fix backbone_gw refcount on queue_work() failure
  batman-adv: Prevent duplicated tvlv handler
  batman-adv: Prevent duplicated global TT entry
  batman-adv: Prevent duplicated softif_vlan entry
  batman-adv: Prevent duplicated nc_node entry
  batman-adv: Prevent duplicated gateway_node entry
  batman-adv: Fix segfault when writing to sysfs elp_interval
  batman-adv: Fix segfault when writing to throughput_override
  batman-adv: Avoid probe ELP information leak
  media: af9035: prevent buffer overflow on write
  Linux 4.14.77
  perf tools: Fix snprint warnings for gcc 8
  ARM: spectre-v1: mitigate user accesses
  ARM: spectre-v1: use get_user() for __get_user()
  ARM: use __inttype() in get_user()
  ARM: oabi-compat: copy semops using __copy_from_user()
  ARM: vfp: use __copy_from_user() when restoring VFP state
  ARM: signal: copy registers using __copy_from_user()
  ARM: spectre-v1: fix syscall entry
  ARM: spectre-v1: add array_index_mask_nospec() implementation
  ARM: spectre-v1: add speculation barrier (csdb) macros
  ARM: KVM: report support for SMCCC_ARCH_WORKAROUND_1
  ARM: KVM: Add SMCCC_ARCH_WORKAROUND_1 fast handling
  ARM: spectre-v2: KVM: invalidate icache on guest exit for Brahma B15
  ARM: KVM: invalidate icache on guest exit for Cortex-A15
  ARM: KVM: invalidate BTB on guest exit for Cortex-A12/A17
  ARM: spectre-v2: warn about incorrect context switching functions
  ARM: spectre-v2: add firmware based hardening
  ARM: spectre-v2: harden user aborts in kernel space
  ARM: spectre-v2: add Cortex A8 and A15 validation of the IBE bit
  ARM: spectre-v2: harden branch predictor on context switches
  ARM: spectre: add Kconfig symbol for CPUs vulnerable to Spectre
  ARM: bugs: add support for per-processor bug checking
  ARM: bugs: hook processor bug checking into SMP and suspend paths
  ARM: bugs: prepare processor bug infrastructure
  ARM: add more CPU part numbers for Cortex and Brahma B15 CPUs
  mm: don't show nr_indirectly_reclaimable in /proc/vmstat
  mm: treat indirectly reclaimable memory as free in overcommit logic
  dcache: account external names as indirectly reclaimable memory
  mm: treat indirectly reclaimable memory as available in MemAvailable
  mm: introduce NR_INDIRECTLY_RECLAIMABLE_BYTES
  xhci: Don't print a warning when setting link state for disabled ports
  i2c: i2c-scmi: fix for i2c_smbus_write_block_data
  mm: Preserve _PAGE_DEVMAP across mprotect() calls
  mm/thp: fix call to mmu_notifier in set_pmd_migration_entry() v2
  arm64: perf: Reject stand-alone CHAIN events for PMUv3
  pinctrl: mcp23s08: fix irq and irqchip setup order
  mmc: block: avoid multiblock reads for the last sector in SPI mode
  cgroup: Fix dom_cgrp propagation when enabling threaded mode
  dm linear: fix linear_end_io conditional definition
  dm linear: eliminate linear_end_io call if CONFIG_DM_ZONED disabled
  dm: fix report zone remapping to account for partition offset
  dm cache: destroy migration_cache if cache target registration failed
  s390/cio: Fix how vfio-ccw checks pinned pages
  perf script python: Fix export-to-sqlite.py sample columns
  perf script python: Fix export-to-postgresql.py occasional failure
  percpu: stop leaking bitmap metadata blocks
  mach64: detect the dot clock divider correctly on sparc
  MIPS: VDSO: Always map near top of user memory
  mm/vmstat.c: fix outdated vmstat_text
  drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7
  x86/kvm/lapic: always disable MMIO interface in x2APIC mode
  clk: x86: Stop marking clocks as CLK_IS_CRITICAL
  clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail
  PCI: hv: support reporting serial number as slot information
  ARM: dts: at91: add new compatibility string for macb on sama5d3
  net: macb: disable scatter-gather for macb on sama5d3
  stmmac: fix valid numbers of unicast filter entries
  hv_netvsc: fix schedule in RCU context
  sound: don't call skl_init_chip() to reset intel skl soc
  sound: enable interrupt after dma buffer initialization
  scsi: qla2xxx: Fix an endian bug in fcpcmd_is_corrupted()
  scsi: iscsi: target: Don't use stack buffer for scatterlist
  mfd: omap-usb-host: Fix dts probe of children
  Bluetooth: hci_ldisc: Free rw_semaphore on close
  ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFER
  ASoC: rsnd: adg: care clock-frequency size
  selftests: memory-hotplug: add required configs
  selftests/efivarfs: add required kernel configs
  ASoC: sigmadsp: safeload should not have lower byte limit
  ASoC: wm8804: Add ACPI support
  ASoC: rt5514: Fix the issue of the delay volume applied again
  inet: make sure to grab rcu_read_lock before using ireq->ireq_opt
  tcp/dccp: fix lockdep issue when SYN is backlogged
  net-ethtool: ETHTOOL_GUFO did not and should not require CAP_NET_ADMIN
  bnxt_en: don't try to offload VLAN 'modify' action
  nfp: avoid soft lockups under control message storm
  bonding: fix warning message
  bonding: pass link-local packets to bonding master also.
  net/mlx5: E-Switch, Fix out of bound access when setting vport rate
  net: aquantia: memory corruption on jumbo frames
  net/mlx5e: Set vlan masks for all offloaded TC rules
  net: dsa: bcm_sf2: Fix unbind ordering
  net/packet: fix packet drop as of virtio gso
  net: stmmac: Fixup the tail addr setting in xmit path
  udp: Unbreak modules that rely on external __skb_recv_udp() availability
  tipc: fix flow control accounting for implicit connect
  team: Forbid enslaving team device to itself
  sctp: update dst pmtu with the correct daddr
  rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096
  rtnetlink: fix rtnl_fdb_dump() for ndmsg header
  qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface
  qlcnic: fix Tx descriptor corruption on 82xx devices
  net/usb: cancel pending work when unbinding smsc75xx
  net: systemport: Fix wake-up interrupt race during resume
  net: sched: Add policy validation for tc attributes
  net: mvpp2: fix a txq_done race condition
  net: mvpp2: Extract the correct ethtype from the skb for tx csum offload
  netlabel: check for IPV4MASK in addrinfo_get
  net/ipv6: Display all addresses in output of /proc/net/if_inet6
  net: ipv4: update fnhe_pmtu when first hop's MTU changes
  net: hns: fix for unmapping problem when SMMU is on
  net: dsa: bcm_sf2: Call setup during switch resume
  ipv6: take rcu lock in rawv6_send_hdrinc()
  ipv4: fix use-after-free in ip_cmsg_recv_dstaddr()
  ip_tunnel: be careful when accessing the inner header
  ip6_tunnel: be careful when accessing the inner header
  bonding: avoid possible dead-lock
  bnxt_en: free hwrm resources, if driver probe fails.
  bnxt_en: Fix TX timeout during netpoll.
  input: misc: qti-haptics: remove "qcom,ilim-ma" property
  iommu: arm-smmu: enhance tlbsync timeout debug
  msm: camera: icp: Reduce delay between subsequent HFI polls
  spi: spi-geni-qcom: Set SPI gpios to sleep state in probe

Change-Id: I58971142d6b0371cb8b29c8d3259371ef4ef6eb4
Signed-off-by: Rohith Palakurthi <prohit@codeaurora.org>