DOWNSTREAM commit '4719c01d' AU341 09/30

* commit '4719c01d':
  cpuidle: Fix cpu frequent exits from low power mode
  ARM: dts: msm: Fix a typo in deleting a node in SM8150 v2 DTSI
  ARM: dts: msm: update PCIe PHY sequence for sm8150 V1 and V2
  PM / devfreq: bw_hwmon: Fix a race condition in hwmon stop
  backlight: qcom-spmi-wled: Update i_sink calculation for WLED flash
  power: qpnp-qg: Clear the STATUS2 register during init
  soc: qcom: smp2p_sleepstate: Add inbound notification
  msm: ipa4: Decrement number of packet in queue only if count was not zero
  coresight: tmc: Correct the status for ETR disable
  msm: vidc: Add sm6150 platform specific data
  clk: qcom: Mark gpu_cc_ahb_clk as critical for SM6150
  ARM: dts: qcom: Update pm qos latency value for sm6150
  ARM: dts: msm: Change display rsc to use AMC votes for sm6150
  soc: qcom: secure_buffer: Fix the parameter passing to dmac_flush_range
  power: qpnp-fg-gen4: Fix enabling parallel current measurement
  ARM: dts: msm: Add mem-attn interrupt configuration for PM8150B
  kbuild: clang: Disable sometimes-uninitialized warnings
  memory_hotplug: Optimize memory onlining
  soc: qcom: wda: Timeout and wq change
  defconfig: Enable CONFIG_BALANCE_ANON_FILE_RECLAIM for sm8150
  wcnss: Fix buffer overflow in wcnss_prealloc_get
  mm: cma: add trace events for CMA alloc perf testing
  mm: slub: call kasan_alloc_pages before freeing pages in slub
  mm: switch KASan hook calling order in page alloc/free path
  mm: vmscan: support complete shrinker reclaim
  mm: vmscan: support equal reclaim for anon and file pages
  mm/memblock: call kmemleak only for logically mapped region
  msm: npu: Add ssr support in dsp mode
  clk: qcom: clk-alpha-pll: check for null when trying to get parent
  mmc: sdhci-msm: Fix the order of removing sdhci-msm functionalities
  msm: pcie: add IOMMU configuration support for root complex
  msm: vidc: fix a return value uninitialized issue
  msm: kgsl: Unmask TSBWRITEERROR intterupts
  msm: mdss: use new PWM API to replace the old one
  perf: llcc: Preserve events across CPU hotplugs
  mailbox: apcs-ipc: Add resource error handling
  dwc3-msm: Add support to pass USB GSI registers offset from device tree
  drivers: thermal: qmi_cooling: Pass timeout in jiffies
  defconfig: Enable qvr external viewer for 8150
  ARM: dts: msm: Adding external VR viewer support for sm8150
  HID: external sensor driver
  ARM: dts: msm: Make latfloor table more lenient on v2
  defconfig: Enable selinux for sdxprairie
  ARM: dts: msm: revert PCIe0 SID change for sm8150-sdx50m
  wil6210: increase RX rings and RX buff array size
  ARM: dts: msm: Fix outgoing smp2p entry for wcnss on qcs405
  ARM: dts: msm: Assign USB supplies for SA6155 and SA6155P
  msm: ipa4: Adding support to configure the WDI protocol gsi channel
  ARM: dts: msm: Add ICE node for SM6150
  defconfig: arm64: enable CONFIG_PAGE_POISONING_ENABLE_DEFAULT for sdmsteppe
  ARM: dts: Enable bus voting and PM QoS for sm6150 platform
  ARM: dts: msm: Add bus scaling, clock properties to qcs403.
  msm: vidc: Enable dcvs for sm6150
  msm: ipa: return the wifi stats when reset is set
  msm: kgsl: Limit log frequency in case of context count maxed out
  Documentation: sound: Add property to increase micbias load on wcd934x
  soc: qcom: smp2p: Add logs in smp2p_update_bits
  ARM: dts: msm: enable WCD9335 in QCS405 RCM variant
  soc: qcom: pil: Fix use-after-free bug when loading firmware images
  cpuidle: lpm-levels: Correct calculation for idx_restrict_time
  ARM: dts: msm: Update apcs register address for qcs405
  clk: qcom: gcc: Update debugcc for MCC for SDMMAGPIE
  ARM: dts: msm: rename coresight DDR CTI name for sm8150
  qseecom: Increase the scattered entry buffer size
  power: step-chg-jeita: update JEITA float voltage compensation
  msm: kgsl: Add support for Limits Management on A640
  ARM: dts: msm: Set number of LEDs per string for WLED for SM8150 platforms
  backlight: qcom-spmi-wled: Calculate maximum available current for flash
  ARM: dts: msm: Increase CMA memory for SM8150
  cnss2: Clear CNSS_DEV_ERR_NOTIFY after collecting firmware dump
  cnss2: Add API to check if WLAN PCIe device is down
  msm: npu: Change ipc irq type to level high
  msm: ipa4: Fix to set correct clock and response state bitmask values
  ARM: dts: msm: Change NPU ipc irq type to level high
  sched: reduce sleep duration in wait_task_inactive()
  ARM: dts: qcom: Add iommu bus voting details for sdmmagpie
  ARM: dts: msm: Enable Partial update for td4328 panel
  ARM: dts: msm: Introduce bus topology for SDMMAGPIE
  drm/msm/dp: Add support for optional gpios
  drm/msm/dp: Add support for DisplayPort on sm6150
  ARM: dts: msm: Disable USB3 on QCS405 RCM platform
  defconfig: msm: Enable PCIe EP mode for sa8155
  usb: f_gsi: initialize 'data_info' with zero
  usb: phy: Add snapshot of QUSB-V2 PHY driver
  net: qrtr: Fix missing resume_tx notification
  ARM: dts: msm: Enable hardware trigger mode for Venus GDSC for SM6150
  ARM: dts: msm: Add SLPI pinctrl for SM8150
  msm: ep_pcie: add PCIe endpoint driver snapshot
  lpm-levels: Remove check for non negative LPM level selected
  msm: vidc: Introducing CBR_VFR upto 480p@30fps
  defconfig: sm8150: Enable crypt target support
  input: misc: qti-haptics: run a cleanup sequence after vibration
  ARM: dts: msm: change secure CB address for qcedev device
  msm: crypto: configure device segment size and segment boundary
  BTFM: FM Slimbus port configuration changes
  msm: gsi: clear irq agter moving to poll mode
  ipa3: add more prints on imp_handle_vote_req
  ion: Ensure ion_buffer fields are initialized
  Revert "mm/filemap: Allow filemap_fault Movable allocations from CMA region"
  stop_machine: Reflow cpu_stop_queue_two_works()
  ARM: dts: msm: Add NFC device node for SM6150
  msm: vidc: fix encoder bw voting for rc_off case
  clk: qcom: gcc: Remove MSS clocks for SDMMAGPIE
  defconfig: enable LINK_LAYER_TEST and EHSET_TEST on SM6150
  ARM: dts: msm: Remove alias for swr node of external codec
  power: battery: fix wakeup source handling for FCC stepping
  sound: usb: Return error if any member API fails
  regulator: qpnp-lcdb: Correct the get_voltage calculation
  ARM: dts: msm: Add node to increase micbias load on sm6150
  ARM: dts: msm: Add uAB connector support for SM6150
  ARM: dts: msm: increase size of adsp mem region for 8150
  pinctrl: qcom: add pinctrl driver for SLPI
  regulator: lcdb: Correct the typo in pull down strength programming
  ARM: dts: msm: Add LCDB BST node for PM6150L and PM8150L
  f2fs: show the fsync_mode=nobarrier mount option
  ARM: dts: msm: Support for dummy RPMH/AOP clocks for sdxprairie
  defconfig: Enable RPMH clock driver for sdxprairie
  dt-bindings: Update clock IDs for SDXPRAIRIE
  ARM: dts: msm: Add the debug clock node for SDMMAGPIE
  clk: qcom: Add debug clock controller for SDMMAGPIE
  soc: sm8150: Update SCT table as per new version
  msm: kgsl: Enable preemption for A608 GPU
  ARM: dts: msm: Update regulator handle for VDD_CX on SA6155
  scsi: ufs: fix broken hibern8_on_idle sysfs nodes
  ion: Ensure non-HLOS memory cannot be mapped by CPU
  msm: vidc: skip init clock and bus data entry for cvp session
  msm: vidc: amend DCVS buffer count logic
  drm/msm/sde: update drm plane with initial status
  power: smb1390: Add IREV IRQ handler to toggle switcher
  net: qrtr: Allow control port access to AID_VENDOR_QRTR
  soc: qcom: qmi: Change txn wait to non-interruptible
  power: qpnp-fg-gen4: Support booting without a battery
  power: fg-util: Notify FCC and FV to charger only if they're valid
  power: smb5-lib: Fix rejection of valid QC4.0 and USB-PD voltages
  net: qrtr: Change port allocation to use cyclic idr
  power: smb5: Explicitly enable USBIN AICL for redundancy
  msm: vidc: do not treat NOC error as fatal error
  diag: rpmsg: Remove set_drvdata in close work
  defconfig: Disable /dev/mem virtual device support on sm8150
  power: smb5: set fast charge safety timer to 768 mins
  power: smb5: Advertise low battery in Type-C Source mode
  ARM: dts: msm: specify thermal mitigation levels for SM8150 platforms
  dwc3-msm: Change USB SMMU related page table range
  msm: kgsl: Check again if HFI fails to find ack
  clk: qcom: clk-debug: Add bandwidth voting for MM clock measures
  soc: qcom: dfc: Support multiq
  ARM: dts: msm: Enable SSC for DSI PLL on sm6150
  soc: qcom: service-locator: Free PD list after client use
  msm: ipa: add NULL pointer check to ipa gsb
  msm: ipa: ipa gsb optimization
  ARM: dts: msm: increase number of fastrpc sessions on SLPI for 8150
  msm: adsprpc: return proper error code while getting device info
  msm: kgsl: Update GMU firmware load offsets
  msm: vidc: fix video encoder bw calculation issues
  ARM: dts: Enable emmc and sd card for sdmmagpie idp and qrd
  ARM: dts: msm: Enable CWB for sm6150 target
  msm: kgsl: Set A6XX_CP_MEM_POOL_DBG_ADDR for A608 GPU
  ARM: dts: msm: Update max mixer blend stages for sm6150
  usb: pd: Do not fail PD driver probe in case of uAB connector
  ARM: dts: msm: Add camera actuator regulator load-current
  ARM: dts: msm: Add osm clock device node for SDMMAGPIE
  clk: qcom: osm: Add support for OSM clocks for SDMMAGPIE
  ARM: dts: msm: Specify MIN bus vote for SM8150
  ARM: dts: msm: Update the QG settings for PM6150
  msm: ipa: Moved uc loaded check before sending the uc command
  defconfig: Enable SSR notification timeouts on SM6150
  soc: qcom: Update CX table to support sm6150
  drivers: cpu_cooling: Remove cooling list lock during post suspend handling
  clk: qcom: Park cam_cc_slow_ahb_clk_src to XO during disable
  msm: kgsl: Set fault bit and trigger recovery if WPTR update fails
  msm: kgsl: Dump both GMU and GPU state for GMU faults
  f2fs: fix unnecessary periodic wakeup of discard thread when dev is busy
  f2fs: let discard thread wait a little longer if dev is busy
  drm/msm/sde: continuous splash support for multiple displays
  drm/msm/sde: issue LUTDMA kickoff based on ctl paths
  drm/msm/dp: trigger hpd callback when gpio hpd is initialized
  ARM: dts: msm: add sensor clock controller device for SM8150
  defconfig: sa8155: enable sensor clock controller driver
  clk: qcom: add SM8150 sensor clock controller driver
  drm/msm/sde: fix feature enable check for WB support
  sched: Improve the scheduler
  ARM: dts: msm: Add ESR fast calibration settings for SM8150 QRD
  trace: Fix sched load balance trace events compilation for non-smp
  drm/msm/sde: update dest scalar status after mixer setup
  cnss2: Add module parameter to support different BDF types
  ARM: dts: msm: change GPU max bus BW votes
  drivers: mailbox: rpmh: clear wait_for_compl for TCS
  msm: npu: pass command result from fw to user driver
  msm: ipa: ipa gsb driver
  soc:qcom:spcom: fix ion buffer unlock on rpmsg dev remove
  ARM: dts: msm: Add VADC and ADC_TM support for sdmmagpie
  mmc: core: Fix issues observed with DRV_IN/OUT requests handling
  msm: ipa: rndis: ecm: Add ipc support and outstanding_pkts counter fix
  Sched: Improve load balancer tracing support
  msm: ipa4: Update IPA EP configuration to latest
  soc: qcom: dcc_v2: Avoid dcc_sram_writel overstep
  ARM: dts: msm: Add OPP table entries for CAMCC and GPUCC clocks on SM6150
  defconfig: Enable DISPCC and CAMCC drivers for SDMMAGPIE
  ARM: dts: msm: Update the dispcc and camcc nodes on SDMMAGPIE
  clk: qcom: Add camera clock driver for SDMMAGPIE
  clk: qcom: Add support for GCC_QUSB2PHY_PRIM_BCR
  msm: kgsl: Add GPU CX Ipeak client support
  drm/msm: Trigger unblank event during bootup
  ARM: dts: msm: Delete and Update the devfreq opp tables for SM8150 v2
  net: qrtr: Avoid qrtr_node lookup & write lock for every rx packet
  cnss2: Update WLFW QMI files
  msm: ipa4: Removing the spin lock in irq context
  ARM: dts: msm: Add actlr settings for apps-smmu for sm8150
  sched/walt: improve the scheduler
  ARM: msm: Add board config support for qcs403
  power: smb5: Reflect die health based on DIE_TEMP_STATUS
  power: smb5: Enable host mode VBUS handling for uUSB connector type
  sched/fair: Fix redundant load balancer reattempt due to LBF_ALL_PINNED
  msm: kgsl: Implement a list of imported memory
  ARM: dts: msm: Correct cpu dump id for QCS405
  defconfig: qcs405: Add STACKPROTECTOR_STRONG for qcs405
  input: touchscreen: hxchipset: add init check before suspend
  input: touchscreen: synaptics_dsx: add init check before suspend
  ARM: dts: msm: Add SPI display support for qcs405 sku2
  defconfig: qcs405: Enable SPI display for qcs405
  msm: mdss: Add SPI display driver
  msm: mdss: Add SPI panel driver for SPI display
  ARM: dts: Update mem_dump node names for SM6150 and SM8150
  rpmsg: glink: cancel the intent_work during cleanup
  sched: core_ctl: Add core_ctl_notifier_register()
  coresight: stm: Free channels in stm_output_disclaim
  sched: walt: Add an API for querying default related thread group load
  sched: Use one variable for tracking energy efficient cpu
  ARM: dts: msm: Update the msm bus scale voting values for sm6150
  msm: kgsl: Skip GMU_GX register programming for A608
  msm: ipa: Return error -ENODEV for set data quota failure
  soc: spcom: fix sleep only on pending send command
  ARM: dts: msm: Enable fcc stepping for sm6150
  power: battery: Expose FCC stepper algorithm execution status
  msm: ipa: Fix timing issues for IPA PM test suite
  power: battery: Add support for FCC stepping
  clk: qcom: clk-alpha-pll: Add support for controlling agera PLLs
  ARM: dts: msm: Update clock name for OPP handle for QCS405
  coresight: byte-cntr: Change minimal block size to 4096
  ARM: dts: msm: program default mdp lut clock to lowsvs
  ARM: dts: msm: Enable emmc and sd card support on sa6155 adp
  clk: qcom: Add support to calibrate fabia PLL
  include: uapi: media: introduce progressive ubwc buffer size
  input: touchscreen: hxchipset: suspend touch only when it's connected
  input: misc: qti-haptics: Add debugfs entries for predefined effects
  ARM: dts: msm: add ST7789v2 spi panel for QCS405
  msm: vidc: Fix color format for HW HEIC encode
  dma-buf: Print dma-buf files associated with each process
  Revert "power: qpnp-fg-gen4: Enable parallel charging current measurement"
  drm/msm/sde: fix connector list iteration in timeline_status
  diag: Use strlcpy/strlcat properly
  msm: vidc: Added error handling in clock data structure
  ARM: dts: msm: modify llcc bw range for sm8150
  ARM: dts: msm: add property to request wakeup for swr master on sm6150
  ARM: dts: msm: move Synaptics touch DT entry to overlay DTS
  sched: fix energy efficient return cpu
  clk: qcom: Add support for GCC_USB3_PHY_PRIM_SP0_BCR
  drm/msm/dsi-staging: improve xlog debug support for dsi
  drivers: soc: qcom: Reorder pil loader in makefile
  sched/fair: Fix CPU capacity updates in update_cpu_capacity()
  msm: vidc: fix some issues in video bw calculation
  input: touchscreen: hxchipset: cut down kernel print
  ARM: dts: msm: enable display rsc for sa8155
  cnss2: Add module parameter for MHI timeout
  cnss2: Do not suspend PCIe link for emulation hardware
  clk: qcom: camcc-sm8150: update clock configurations based on HW guidance
  ARM: dts: msm: Add CNSS device tree node for SM8150
  ARM: dts: msm: update mdp ramdump memory size for sm8150
  clk: qcom: npucc-sm8150: update dp_cal clock plan
  ARM: dts: msm: Update thermal configuration for SM8150
  ARM: dts: msm: Update phy resets for QMP phy on SM6150
  power: smb5: initialize OTG current configuration
  spi: spi-geni-qcom: Adjust the bandwidth vote for SPI
  msm: mdss: Fix Gamma LUT bounds condition
  ARM: dts: msm: update the memory map on QCS405
  sched: Ensure watchdog is enabled before disabling
  spi: spi-geni-qcom: Add support for SE DMA mode
  drm/msm: do not report error when data block is not present
  drm/msm/dp: reallocate EDID buffer when needed
  drm: edid: add vrefresh info for 640x480@72Hz mode
  defconfig: msm: Enable LLCC perfmon driver for sm6150
  ARM: dts: msm: Remove C3 mode for sm8150
  msm: vidc: fix DCVS logic issues
  msm:mdss: Add SPI client driver for SPI display
  clk: qcom: camcc-sm8150: update pll2 config control register value
  ARM: dts: msm: Enable deep pre-fetch for multimedia TBUs for sm8150
  rpmsg: glink: spi: Rework glink spi bus voting logic
  msm: vidc: correct CVP usecase bandwidth calculations
  drm/msm/dsi-staging: ignore panel disable failure
  drivers: soc: qcom: Initialize priv data on notifier unregister
  power: smb5: Reorder steps to change USBIN voltage for Type-C adaptors
  drm/msm/dsi-staging: fix few DSC parameter calculations
  ARM: dts: msm: Add cx gdsc control for A640 GPU
  diag: Reset the usb read buffer in case of error
  rpmsg: glink: spi: Change in_reset to atomic
  rpmsg: glink: spi: Use irq safe spinlocks
  rpmsg: glink: spi: Try to send rx done immediately
  rpmsg: glink: spi: Cancel intent work in remove
  rpmsg: glink: spi: Fix idr and channel refcounts
  drm/msm/sde: fix wrong alpha inverse in coverage blend op
  clk: qcom: clk-aop-qmp: use correct name pointer before clock registration
  clk: qcom: gdsc-regulator: use mode control for disable skipping feature
  ARM: dts: msm: specify AOP QMP mailbox for gpu_cx_gdsc on SM8150
  clk: qcom: gdsc-regulator: add support for QMP-based GDSC enable
  msm: ipa: Update MHI channel state on host after suspend
  sched/fair: Allow idle local group to pull tasks from overloaded group
  usb: phy: qmp: Remove portselect for USB3 only phy
  ARM: dts: msm: Add dummy offset for MISC_TYPEC_CTRL on SM8150
  drm/msm/sde: update register programming for avr one shot mode
  lowmemorykiller: don't take scan_mutex lock when low on memory
  rpmsg: glink: Fix use after free in open_ack TIMEOUT case
  hung task: check specific tasks for long uninterruptible sleep state
  wil6210: fix invalid memory access for rx_buff_mgmt debugfs
  wil6210: add FT roam support for AP and station
  wil6210: remove reset file from debugfs
  mm: add a feedback from lowmemorykiller for OOM decisions
  ARM: dts: msm: Update the min/max voltages for SA6155
  ARM: dts: msm: Add qdss clk for llcc_perfmon on sm6150
  Seemp: Logging each Kernel Protect Report only once
  ARM: dts: msm: Add dt nodes to parse micbias voltage
  ARM: dts: msm: updates to MDF entries to enable access control
  msm: kgsl: Add a property to find if secure context is supported
  msm: kgsl: Add a property to find alignment of secure buffers
  sched: Improve the scheduler
  ARM: dts: msm: Enable UFS support on sa6155 adp platform
  drm/msm/sde: add support for Cx iPeak mitigation
  drm/msm/sde: Add support for selecting LM for CWB
  power: smb5-lib: Fix floating cable IRQ storms
  power: smb5-lib: support liquid presence detection
  ARM: dts: msm: Add NT36850 panel support for HDK8150
  power: smb5-lib: Fix wireless property in reading wireless VOUT
  msm: pcie: register PCI driver with framework for root port
  cnss2: Remove deprecated device IDs for emulation devices
  cnss2: Use correct QMI instance ID
  cnss2: Return error for QMI initialization failure
  cnss2: Add QCA6390 device ID for cnss_get_bus_type()
  kbuild: gcov: enable -fno-tree-loop-im if supported
  ARM: dts: msm: revert DSI preferences change for sa8155
  net: memset smsg to avoid the padding data
  msm: ipa: Use Spinlock in GSI irq context
  drm/msm/sde: move auto-refresh disable to commit phase
  sched/fair: Make sd_overutilized if cpu is overutilized
  Revert "rpmsg: glink: spi: unregister rpdev during ept destroy"
  soc: sm8150: Update SCT table as per new version
  drm/msm/dsi-staging: update DSI phy T_TA_GO duration
  ARM: dts: msm: Add regulator and peripheral devices for SA6155
  defconfig: sm6150: enable proxy consumer driver for regulators
  msm: kgsl: Enable IO coherency for A608 GPU
  msm: ipa: Adapt EE area registers for IPA4.5
  MMC: Core: Fix reading ext_csd and status from debugfs
  ARM: dts: msm: add proxy vote for DSI supplies for sm6150
  drm/msm/dsi-staging: add lp11-init support for DRM DSI driver
  msm_11ad: remove control of rf_clk3_pin if not defined in dts
  drm/msm/dsi-staging: Fix buffer overflow and Null pointer dereference
  ARM: dts: msm: Add proxy client node for SM6150
  scsi: ufs: remove redundant code introduced from patch porting
  ARM: dts: msm: Fix compilation issue with camera nodes on sm6150
  ARM: dts: msm: change default panel for sm6150 command idp
  ARM: dts: msm: Add LPM residency for sm8150/sm6150/sdmmagpie/qcs405
  cpuidle: lpm-levels: Use static residency values
  ARM: dts: msm: Remove S1 bypass of tmc for SM6150
  ARM: dts: msm: Add sensors ahb master for sm8150
  power: qpnp-fg-gen4: Add support to configure Ki coefficient full SOC
  power: qpnp-fg-gen4: Retry ESR fast calibration on a failed attempt
  ARM: dts: msm: Remove no asid retention workaround for sm8150
  ARM: dts: msm: Enable deep pre-fetch for NPU for sm8150
  ARM: dts: msm: Enable deep pre-fetch errata workaround for sm8150
  iommu: arm-smmu: Standardize deep pre-fetch errata workaround
  net: qrtr: Do not send packets before Hello negotiation
  drm/msm/sde: make LUTDMA kickoff as blocking for video mode
  sysctl/sched: do not allow value "0" for sched_{up,down}_migrate knobs
  soc: qcom: dfc: Change workqueue type to single thread
  power: qpnp-fg-gen4: Add encoding function for FULL_SOC for PM8150B v2
  msm: gsi: wait for interrupts for commands
  usb: dwc3: Powerdown the SS PHY while connected to HS device
  ARM: dts: msm: Update SDCC Driver Strength Setting for sm8510
  ARM: dts: msm: Enable device mode bus suspend on SM8150
  scsi: ufs-qcom: fix ref-clk pad regulator initialization
  msm: kgsl: Store the HFI bandwidth vote table locally
  msm: ipa: Make sure aggregation limit is upper bounded
  msm: ipa: Update IPA_UC_MAILBOX_m_n register offset
  coresight: tmc: Avoid reading tmc node before it being enabled
  msm: ipa: Update header register configuration for ipa4.5
  ARM: dts: msm: Add Proper id for swr bus instances for sm6150
  drm/msm/dsi-staging: Expose panel bit depth
  ARM: dts: msm: Add glink-label in glink_spi_xprt for sm6150
  clk: qcom: cpu-qcs405: Update the fmax voltage for HF PLL
  ARM: dts: msm: Extend GFX register offset for SM6150
  ARM: dts: qcom: Update QUPv3 core master bus id for SDMMAGPIE
  ARM: dts: msm: Add CDSP to the master list in rpm master stats for qcs405
  defconfig: msm: Enable HSUART, I2C, Slimbus for 32-bit QCS405
  diag: Prevent out of bound access while initializing msg mask
  ARM: dts: msm: Disable QoS programming for SM6150
  msm: kgsl: Fix kgsl_clk_set_rate warning message
  usb: phy: qmp: Add portselect for USB3 only phy
  ARM: dts: msm: Enable ESD check for QRD SM8150
  ARM: dts: msm: Add EUD support for SM6150
  ARM: dts: msm: remove rf_clk3_pin_clk in wil6210 node for sm8150
  ARM: dts: msm: enable  ESD for td4328 panel on sm6150
  ARM: dts: msm: extend GPU DCVS table to 5 entries
  ARM: dts: msm: add RC sub-nodes under each PCIe node on sm8150
  msm: vidc: fix clock rate selection in multiple sessions
  Revert "drm/msm/sde: add sysfs node in dpu driver to provide fps"
  drm/msm/dp: add support to force HDCP 2.2 encryption
  drm/msm/hdcp: fix the HDCP 2.2 compliance for DisplayPort
  ARM: dts: msm: Add modem thermal sensors for SM8150 fusion
  defconfig: sm8150: Enable QMI based thermal sensor driver
  drivers: thermal: qmi-sensor: Add driver to interface with QMI sensor
  usb: dwc3: Change TXFIFO size for GSI IN EP based on controller
  ARM: dts: msm: Update glink-lable string for wcnss
  drm/msm/dsi-staging: send proper primary flag to connector
  drm/msm/dsi-staging: destroy dsi error_wq after disabling interrupts
  input: touchscreen: synaptics_dsx: add display dependency
  ARM: dts: msm: add Synaptics Touch panel support for SM6150
  pinctrl: sdmmagpie: fix offset for pin groups.
  ARM: dts: msm: enable SSC feature for DSI clocks on sm8150
  ARM: dts: msm: update DSI phy register range for SM8150
  defconfig: arm64: Enable PAGE_POISONING_ENABLE_DEFAULT for sm8150
  ARM: dts: msm: Enable UFS support on sdmmagpie
  drm/msm/dp: fix link training during system resume
  ARM: dts: msm: enable display rsc for sm6150
  soc: qcom: glink_probe: Return if rpmsg_send fails
  rpmsg: glink: Add reset status
  rpmsg: glink: Try to send rx done in irq
  clk: qcom: gpucc-sm8150: mark gpu_cc_ahb_clk as critical
  usb: f_gsi: Resume USB on handling disconnect event in suspend state
  msm: kgsl: Snapshot the correct amount of CP ROQ data
  msm: kgsl: Correct A608 CP mempool size
  diag: Handle connection reset error
  msm: kgsl: Enable GMU power counters if accessible
  soc: qcom: pil: Avoid memory leaks by releasing the firmware resources
  msm: kgsl: Avoid out of bound register access for A6xx
  Revert "msm: kgsl: Enable preemption for A608 GPU"
  USB: f_fs: Disable USB LPM on bus_suspend with ADB
  msm: kgsl: Print process name on pagefault
  drm/msm/sde: Fix race condition between enable/disable hist irq
  ARM: dts: msm: Change number of channels for calypso
  net: qualcomm: rmnet: Skip processing loopback packets
  msm: kgsl: Count finished preemptions
  ARM: dts: qcom: Add second modem mitigation devices for SM8150 fusion
  spi-geni-qcom: Set DMA mask to support 64 bit DMA
  msm: vidc: Register CVP node conditionally
  ARM: dts: msm: qsync enable for 4k video mode on SM8150
  spi-geni-qcom: Support to disable runtime PM autosuspend
  clk: qcom: npucc-sm8150: specify external parents for NPU_CC branch clocks
  usb: pd: allow outgoing requests after receiving status payload
  usb: pd: combine into PE_SEND_SOFT_RESET
  defconfig: msm: Enable minidump support for SM6150 target
  msm: kgsl: Overwrite the existing snapshot only if GMU is enabled
  msm: ipa: Fix to add string NULL terminator

Change-Id: Idab625b37481098d0ee51137761a58add8f2c295
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>