Merge "ARM: dts: msm: Add nodes for eeprom, actuator in triple cam for... (966d4aa6) · Commits · e / devices / android_kernel_xiaomi_nabu

arch/arm64/boot/dts/qcom/sdmmagpie-camera-sensor-idp.dtsi

+65 −16

Original line number	Diff line number	Diff line
		@@ -67,6 +67,19 @@
		rgltr-load-current = <100000>;
		};

		actuator_triple_tele: qcom,actuator@2 {
		cell-index = <2>;
		reg = <0x2>;
		compatible = "qcom,actuator";
		cci-master = <0>;
		cam_vaf-supply = <&pm8009_s2>;
		regulator-names = "cam_vaf";
		rgltr-cntrl-support;
		rgltr-min-voltage = <2900000>;
		rgltr-max-voltage = <2900000>;
		rgltr-load-current = <100000>;
		};

		eeprom_rear: qcom,eeprom@0 {
		cell-index = <0>;
		reg = <0>;
		@@ -183,33 +196,69 @@
		reg = <0x3>;
		compatible = "qcom,eeprom";
		cam_vio-supply = <&pm8009_l7>;
		cam_vana-supply = <&pm8009_l6>;
		cam_vdig-supply = <&pm8009_l4>;
		cam_vana-supply = <&pm8009_l5>;
		cam_vdig-supply = <&pm8009_l1>;
		cam_clk-supply = <&titan_top_gdsc>;
		cam_vaf-supply = <&pm8009_s2>;
		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
		"cam_clk", "cam_vaf";
		rgltr-cntrl-support;
		rgltr-min-voltage = <1800000 2800000 1200000 0 2900000>;
		rgltr-max-voltage = <1800000 2800000 1200000 0 2900000>;
		rgltr-min-voltage = <1800000 2800000 1100000 0 2900000>;
		rgltr-max-voltage = <1800000 2800000 1100000 0 2900000>;
		rgltr-load-current = <0 80000 105000 0 100000>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk1_active
		&cam_sensor_rear2_active>;
		pinctrl-1 = <&cam_sensor_mclk1_suspend
		&cam_sensor_rear2_suspend>;
		gpios = <&tlmm 14 0>,
		<&pm8009_gpios 2 0>;
		pinctrl-0 = <&cam_sensor_mclk0_active
		&cam_sensor_rear_active>;
		pinctrl-1 = <&cam_sensor_mclk0_suspend
		&cam_sensor_rear_suspend>;
		gpios = <&tlmm 13 0>,
		<&pm8009_gpios 1 0>;
		gpio-reset = <1>;
		gpio-req-tbl-num = <0 1>;
		gpio-req-tbl-flags = <1 0>;
		gpio-req-tbl-label = "CAMIF_MCLK1",
		"CAM_RESET1";
		gpio-req-tbl-label = "CAMIF_MCLK0",
		"CAM_RESET0";
		sensor-mode = <0>;
		cci-master = <0>;
		status = "ok";
		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;
		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "turbo";
		clock-rates = <24000000>;
		};

		eeprom_triple_uw: qcom,eeprom@4 {
		cell-index = <4>;
		reg = <0x4>;
		compatible = "qcom,eeprom";
		cam_vio-supply = <&pm8009_l7>;
		cam_vana-supply = <&pm8009_l6>;
		cam_vdig-supply = <&pm8009_l2>;
		cam_clk-supply = <&titan_top_gdsc>;
		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
		"cam_clk";
		rgltr-cntrl-support;
		rgltr-min-voltage = <1800000 2800000 1050000 0>;
		rgltr-max-voltage = <1800000 2800000 1050000 0>;
		rgltr-load-current = <0 80000 105000 0>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk2_active
		&cam_sensor_front_active>;
		pinctrl-1 = <&cam_sensor_mclk2_suspend
		&cam_sensor_front_suspend>;
		gpios = <&tlmm 15 0>,
		<&pm8009_gpios 4 0>;
		gpio-reset = <1>;
		gpio-req-tbl-num = <0 1>;
		gpio-req-tbl-flags = <1 0>;
		gpio-req-tbl-label = "CAMIF_MCLK2",
		"CAM_RESET2";
		sensor-mode = <0>;
		cci-master = <1>;
		status = "ok";
		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "turbo";
		clock-rates = <24000000>;
		@@ -438,7 +487,7 @@
		sensor-position-yaw = <180>;
		led-flash-src = <&led_flash_rear_aux>;
		eeprom-src = <&eeprom_triple_rear_aux>;
		actuator-src = <&actuator_rear>;
		actuator-src = <&actuator_triple_tele>;
		cam_vio-supply = <&pm8009_l7>;
		cam_vana-supply = <&pm8009_l6>;
		cam_vdig-supply = <&pm8009_l4>;
		@@ -479,10 +528,10 @@
		sensor-position-roll = <270>;
		sensor-position-pitch = <0>;
		sensor-position-yaw = <0>;
		cam_vio-supply = <&pm8009_l7>;
		eeprom-src = <&eeprom_front>;
		eeprom-src = <&eeprom_triple_uw>;
		led-flash-src = <&led_flash_rear_aux>;
		actuator-src = <&actuator_rear_aux>;
		cam_vio-supply = <&pm8009_l7>;
		cam_vana-supply = <&pm8009_l6>;
		cam_vdig-supply = <&pm8009_l2>;
		cam_clk-supply = <&titan_top_gdsc>;