Merge remote-tracking branch 'quic/msm-4.14' into dev/msm-4.14-display
* quic/msm-4.14:
cpuidle: Fix cpu frequent exits from low power mode
ARM: dts: msm: Fix a typo in deleting a node in SM8150 v2 DTSI
ARM: dts: msm: update PCIe PHY sequence for sm8150 V1 and V2
PM / devfreq: bw_hwmon: Fix a race condition in hwmon stop
backlight: qcom-spmi-wled: Update i_sink calculation for WLED flash
power: qpnp-qg: Clear the STATUS2 register during init
soc: qcom: smp2p_sleepstate: Add inbound notification
msm: ipa4: Decrement number of packet in queue only if count was not zero
coresight: tmc: Correct the status for ETR disable
msm: vidc: Add sm6150 platform specific data
clk: qcom: Mark gpu_cc_ahb_clk as critical for SM6150
ARM: dts: qcom: Update pm qos latency value for sm6150
ARM: dts: msm: Change display rsc to use AMC votes for sm6150
soc: qcom: secure_buffer: Fix the parameter passing to dmac_flush_range
power: qpnp-fg-gen4: Fix enabling parallel current measurement
ARM: dts: msm: Add mem-attn interrupt configuration for PM8150B
kbuild: clang: Disable sometimes-uninitialized warnings
memory_hotplug: Optimize memory onlining
soc: qcom: wda: Timeout and wq change
defconfig: Enable CONFIG_BALANCE_ANON_FILE_RECLAIM for sm8150
wcnss: Fix buffer overflow in wcnss_prealloc_get
mm: cma: add trace events for CMA alloc perf testing
mm: slub: call kasan_alloc_pages before freeing pages in slub
mm: switch KASan hook calling order in page alloc/free path
mm: vmscan: support complete shrinker reclaim
mm: vmscan: support equal reclaim for anon and file pages
mm/memblock: call kmemleak only for logically mapped region
msm: npu: Add ssr support in dsp mode
clk: qcom: clk-alpha-pll: check for null when trying to get parent
mmc: sdhci-msm: Fix the order of removing sdhci-msm functionalities
msm: pcie: add IOMMU configuration support for root complex
msm: vidc: fix a return value uninitialized issue
msm: kgsl: Unmask TSBWRITEERROR intterupts
msm: mdss: use new PWM API to replace the old one
perf: llcc: Preserve events across CPU hotplugs
mailbox: apcs-ipc: Add resource error handling
dwc3-msm: Add support to pass USB GSI registers offset from device tree
drivers: thermal: qmi_cooling: Pass timeout in jiffies
defconfig: Enable qvr external viewer for 8150
ARM: dts: msm: Adding external VR viewer support for sm8150
HID: external sensor driver
ARM: dts: msm: Make latfloor table more lenient on v2
defconfig: Enable selinux for sdxprairie
ARM: dts: msm: revert PCIe0 SID change for sm8150-sdx50m
wil6210: increase RX rings and RX buff array size
ARM: dts: msm: Fix outgoing smp2p entry for wcnss on qcs405
ARM: dts: msm: Assign USB supplies for SA6155 and SA6155P
msm: ipa4: Adding support to configure the WDI protocol gsi channel
ARM: dts: msm: Add ICE node for SM6150
defconfig: arm64: enable CONFIG_PAGE_POISONING_ENABLE_DEFAULT for sdmsteppe
ARM: dts: Enable bus voting and PM QoS for sm6150 platform
ARM: dts: msm: Add bus scaling, clock properties to qcs403.
msm: vidc: Enable dcvs for sm6150
msm: ipa: return the wifi stats when reset is set
msm: kgsl: Limit log frequency in case of context count maxed out
Documentation: sound: Add property to increase micbias load on wcd934x
soc: qcom: smp2p: Add logs in smp2p_update_bits
ARM: dts: msm: enable WCD9335 in QCS405 RCM variant
soc: qcom: pil: Fix use-after-free bug when loading firmware images
cpuidle: lpm-levels: Correct calculation for idx_restrict_time
ARM: dts: msm: Update apcs register address for qcs405
clk: qcom: gcc: Update debugcc for MCC for SDMMAGPIE
ARM: dts: msm: rename coresight DDR CTI name for sm8150
qseecom: Increase the scattered entry buffer size
power: step-chg-jeita: update JEITA float voltage compensation
msm: camera: csid: Disable CSI Rx upon fatal errors
msm: kgsl: Add support for Limits Management on A640
msm: camera: isp: Select epoch config based on Hardware
ARM: dts: msm: Set number of LEDs per string for WLED for SM8150 platforms
backlight: qcom-spmi-wled: Calculate maximum available current for flash
ARM: dts: msm: Increase CMA memory for SM8150
cnss2: Clear CNSS_DEV_ERR_NOTIFY after collecting firmware dump
cnss2: Add API to check if WLAN PCIe device is down
msm: npu: Change ipc irq type to level high
msm: ipa4: Fix to set correct clock and response state bitmask values
ARM: dts: msm: Change NPU ipc irq type to level high
sched: reduce sleep duration in wait_task_inactive()
ARM: dts: qcom: Add iommu bus voting details for sdmmagpie
ARM: dts: msm: Enable Partial update for td4328 panel
ARM: dts: msm: Introduce bus topology for SDMMAGPIE
drm/msm/dp: Add support for optional gpios
drm/msm/dp: Add support for DisplayPort on sm6150
ARM: dts: msm: Disable USB3 on QCS405 RCM platform
defconfig: msm: Enable PCIe EP mode for sa8155
usb: f_gsi: initialize 'data_info' with zero
usb: phy: Add snapshot of QUSB-V2 PHY driver
net: qrtr: Fix missing resume_tx notification
ARM: dts: msm: Enable hardware trigger mode for Venus GDSC for SM6150
ARM: dts: msm: Add SLPI pinctrl for SM8150
msm: ep_pcie: add PCIe endpoint driver snapshot
lpm-levels: Remove check for non negative LPM level selected
msm: camera: csiphy: Correct delay when configure device
msm: vidc: Introducing CBR_VFR upto 480p@30fps
msm: camera: flash: Add torch handling in early PCR
defconfig: sm8150: Enable crypt target support
input: misc: qti-haptics: run a cleanup sequence after vibration
ARM: dts: msm: change secure CB address for qcedev device
msm: crypto: configure device segment size and segment boundary
BTFM: FM Slimbus port configuration changes
msm: gsi: clear irq agter moving to poll mode
ipa3: add more prints on imp_handle_vote_req
msm: camera: core: Check context state prior to handle release
ion: Ensure ion_buffer fields are initialized
Revert "mm/filemap: Allow filemap_fault Movable allocations from CMA region"
stop_machine: Reflow cpu_stop_queue_two_works()
ARM: dts: msm: Add NFC device node for SM6150
msm: vidc: fix encoder bw voting for rc_off case
clk: qcom: gcc: Remove MSS clocks for SDMMAGPIE
ARM: dts: msm: Add camera actuator regulator load-current
defconfig: enable LINK_LAYER_TEST and EHSET_TEST on SM6150
ARM: dts: msm: Remove alias for swr node of external codec
power: battery: fix wakeup source handling for FCC stepping
sound: usb: Return error if any member API fails
regulator: qpnp-lcdb: Correct the get_voltage calculation
ARM: dts: msm: Add node to increase micbias load on sm6150
ARM: dts: msm: Add uAB connector support for SM6150
ARM: dts: msm: increase size of adsp mem region for 8150
pinctrl: qcom: add pinctrl driver for SLPI
regulator: lcdb: Correct the typo in pull down strength programming
ARM: dts: msm: Add LCDB BST node for PM6150L and PM8150L
f2fs: show the fsync_mode=nobarrier mount option
ARM: dts: msm: Support for dummy RPMH/AOP clocks for sdxprairie
defconfig: Enable RPMH clock driver for sdxprairie
dt-bindings: Update clock IDs for SDXPRAIRIE
ARM: dts: msm: Add the debug clock node for SDMMAGPIE
clk: qcom: Add debug clock controller for SDMMAGPIE
soc: sm8150: Update SCT table as per new version
msm: kgsl: Enable preemption for A608 GPU
ARM: dts: msm: Update regulator handle for VDD_CX on SA6155
scsi: ufs: fix broken hibern8_on_idle sysfs nodes
ion: Ensure non-HLOS memory cannot be mapped by CPU
msm: vidc: skip init clock and bus data entry for cvp session
msm: vidc: amend DCVS buffer count logic
power: smb1390: Add IREV IRQ handler to toggle switcher
net: qrtr: Allow control port access to AID_VENDOR_QRTR
soc: qcom: qmi: Change txn wait to non-interruptible
power: qpnp-fg-gen4: Support booting without a battery
power: fg-util: Notify FCC and FV to charger only if they're valid
power: smb5-lib: Fix rejection of valid QC4.0 and USB-PD voltages
net: qrtr: Change port allocation to use cyclic idr
power: smb5: Explicitly enable USBIN AICL for redundancy
msm: vidc: do not treat NOC error as fatal error
diag: rpmsg: Remove set_drvdata in close work
defconfig: Disable /dev/mem virtual device support on sm8150
msm: camera: mem: Remove lock from get_cpu_buf unless mapping
power: smb5: set fast charge safety timer to 768 mins
power: smb5: Advertise low battery in Type-C Source mode
ARM: dts: msm: specify thermal mitigation levels for SM8150 platforms
dwc3-msm: Change USB SMMU related page table range
msm: kgsl: Check again if HFI fails to find ack
clk: qcom: clk-debug: Add bandwidth voting for MM clock measures
soc: qcom: dfc: Support multiq
ARM: dts: msm: Enable SSC for DSI PLL on sm6150
soc: qcom: service-locator: Free PD list after client use
msm: ipa: add NULL pointer check to ipa gsb
msm: ipa: ipa gsb optimization
ARM: dts: msm: increase number of fastrpc sessions on SLPI for 8150
msm: adsprpc: return proper error code while getting device info
msm: kgsl: Update GMU firmware load offsets
msm: vidc: fix video encoder bw calculation issues
ARM: dts: Enable emmc and sd card for sdmmagpie idp and qrd
ARM: dts: msm: Enable CWB for sm6150 target
msm: kgsl: Set A6XX_CP_MEM_POOL_DBG_ADDR for A608 GPU
ARM: dts: msm: Update max mixer blend stages for sm6150
usb: pd: Do not fail PD driver probe in case of uAB connector
ARM: dts: msm: Add camera actuator regulator load-current
ARM: dts: msm: Add osm clock device node for SDMMAGPIE
clk: qcom: osm: Add support for OSM clocks for SDMMAGPIE
ARM: dts: msm: Specify MIN bus vote for SM8150
ARM: dts: msm: Update the QG settings for PM6150
msm: ipa: Moved uc loaded check before sending the uc command
defconfig: Enable SSR notification timeouts on SM6150
soc: qcom: Update CX table to support sm6150
drivers: cpu_cooling: Remove cooling list lock during post suspend handling
clk: qcom: Park cam_cc_slow_ahb_clk_src to XO during disable
msm: kgsl: Set fault bit and trigger recovery if WPTR update fails
msm: kgsl: Dump both GMU and GPU state for GMU faults
f2fs: fix unnecessary periodic wakeup of discard thread when dev is busy
f2fs: let discard thread wait a little longer if dev is busy
ARM: dts: msm: Add lowsvs clock support for IPE for sm8150 platform
ARM: dts: msm: add sensor clock controller device for SM8150
defconfig: sa8155: enable sensor clock controller driver
clk: qcom: add SM8150 sensor clock controller driver
msm: camera: lrme: Fix the unpack config and add dump function
sched: Improve the scheduler
ARM: dts: msm: Add ESR fast calibration settings for SM8150 QRD
trace: Fix sched load balance trace events compilation for non-smp
cnss2: Add module parameter to support different BDF types
ARM: dts: msm: change GPU max bus BW votes
drivers: mailbox: rpmh: clear wait_for_compl for TCS
msm: npu: pass command result from fw to user driver
msm: ipa: ipa gsb driver
soc:qcom:spcom: fix ion buffer unlock on rpmsg dev remove
ARM: dts: msm: Add VADC and ADC_TM support for sdmmagpie
mmc: core: Fix issues observed with DRV_IN/OUT requests handling
msm: ipa: rndis: ecm: Add ipc support and outstanding_pkts counter fix
Sched: Improve load balancer tracing support
msm: ipa4: Update IPA EP configuration to latest
soc: qcom: dcc_v2: Avoid dcc_sram_writel overstep
ARM: dts: msm: Add OPP table entries for CAMCC and GPUCC clocks on SM6150
defconfig: Enable DISPCC and CAMCC drivers for SDMMAGPIE
ARM: dts: msm: Update the dispcc and camcc nodes on SDMMAGPIE
clk: qcom: Add camera clock driver for SDMMAGPIE
clk: qcom: Add support for GCC_QUSB2PHY_PRIM_BCR
msm: kgsl: Add GPU CX Ipeak client support
msm: camera: eeprom: set platform driver data to null
ARM: dts: msm: Delete and Update the devfreq opp tables for SM8150 v2
ARM: dts: msm: Set the bound as multiple of 1MB
net: qrtr: Avoid qrtr_node lookup & write lock for every rx packet
cnss2: Update WLFW QMI files
msm: ipa4: Removing the spin lock in irq context
ARM: dts: msm: Add actlr settings for apps-smmu for sm8150
sched/walt: improve the scheduler
ARM: msm: Add board config support for qcs403
power: smb5: Reflect die health based on DIE_TEMP_STATUS
power: smb5: Enable host mode VBUS handling for uUSB connector type
sched/fair: Fix redundant load balancer reattempt due to LBF_ALL_PINNED
msm: kgsl: Implement a list of imported memory
ARM: dts: msm: Correct cpu dump id for QCS405
defconfig: qcs405: Add STACKPROTECTOR_STRONG for qcs405
input: touchscreen: hxchipset: add init check before suspend
input: touchscreen: synaptics_dsx: add init check before suspend
ARM: dts: msm: Add SPI display support for qcs405 sku2
defconfig: qcs405: Enable SPI display for qcs405
msm: mdss: Add SPI display driver
msm: mdss: Add SPI panel driver for SPI display
ARM: dts: Update mem_dump node names for SM6150 and SM8150
rpmsg: glink: cancel the intent_work during cleanup
sched: core_ctl: Add core_ctl_notifier_register()
coresight: stm: Free channels in stm_output_disclaim
sched: walt: Add an API for querying default related thread group load
sched: Use one variable for tracking energy efficient cpu
ARM: dts: msm: Update the msm bus scale voting values for sm6150
msm: kgsl: Skip GMU_GX register programming for A608
msm: ipa: Return error -ENODEV for set data quota failure
soc: spcom: fix sleep only on pending send command
ARM: dts: msm: Enable fcc stepping for sm6150
power: battery: Expose FCC stepper algorithm execution status
msm: ipa: Fix timing issues for IPA PM test suite
power: battery: Add support for FCC stepping
clk: qcom: clk-alpha-pll: Add support for controlling agera PLLs
ARM: dts: msm: Update clock name for OPP handle for QCS405
coresight: byte-cntr: Change minimal block size to 4096
ARM: dts: msm: program default mdp lut clock to lowsvs
ARM: dts: msm: Enable emmc and sd card support on sa6155 adp
clk: qcom: Add support to calibrate fabia PLL
include: uapi: media: introduce progressive ubwc buffer size
input: touchscreen: hxchipset: suspend touch only when it's connected
input: misc: qti-haptics: Add debugfs entries for predefined effects
ARM: dts: msm: add ST7789v2 spi panel for QCS405
msm: vidc: Fix color format for HW HEIC encode
dma-buf: Print dma-buf files associated with each process
Revert "power: qpnp-fg-gen4: Enable parallel charging current measurement"
msm: camera: lrme: Add handler function to support early PCR
diag: Use strlcpy/strlcat properly
msm: camera: delete i2c data in release dev
msm: vidc: Added error handling in clock data structure
ARM: dts: msm: modify llcc bw range for sm8150
ARM: dts: msm: add property to request wakeup for swr master on sm6150
ARM: dts: msm: move Synaptics touch DT entry to overlay DTS
sched: fix energy efficient return cpu
clk: qcom: Add support for GCC_USB3_PHY_PRIM_SP0_BCR
drivers: soc: qcom: Reorder pil loader in makefile
sched/fair: Fix CPU capacity updates in update_cpu_capacity()
msm: camera: cpas: Disable camnoc ubwc settings for sm6150
msm: camera: isp: Handle bus error in bottom half
msm: vidc: fix some issues in video bw calculation
input: touchscreen: hxchipset: cut down kernel print
ARM: dts: msm: Add support for irs1645 sensor
ARM: dts: msm: enable display rsc for sa8155
cnss2: Add module parameter for MHI timeout
cnss2: Do not suspend PCIe link for emulation hardware
clk: qcom: camcc-sm8150: update clock configurations based on HW guidance
ARM: dts: msm: Add CNSS device tree node for SM8150
ARM: dts: msm: update mdp ramdump memory size for sm8150
msm: camera: Replace mutex lock with context spin lock
clk: qcom: npucc-sm8150: update dp_cal clock plan
ARM: dts: msm: Update thermal configuration for SM8150
ARM: dts: msm: Update phy resets for QMP phy on SM6150
power: smb5: initialize OTG current configuration
spi: spi-geni-qcom: Adjust the bandwidth vote for SPI
msm: mdss: Fix Gamma LUT bounds condition
ARM: dts: msm: update the memory map on QCS405
sched: Ensure watchdog is enabled before disabling
spi: spi-geni-qcom: Add support for SE DMA mode
defconfig: msm: Enable LLCC perfmon driver for sm6150
ARM: dts: msm: Remove C3 mode for sm8150
msm: vidc: fix DCVS logic issues
msm:mdss: Add SPI client driver for SPI display
clk: qcom: camcc-sm8150: update pll2 config control register value
ARM: dts: msm: Enable deep pre-fetch for multimedia TBUs for sm8150
rpmsg: glink: spi: Rework glink spi bus voting logic
msm: vidc: correct CVP usecase bandwidth calculations
drivers: soc: qcom: Initialize priv data on notifier unregister
power: smb5: Reorder steps to change USBIN voltage for Type-C adaptors
ARM: dts: msm: Add cx gdsc control for A640 GPU
msm: camera: icp: Change spin lock type
diag: Reset the usb read buffer in case of error
rpmsg: glink: spi: Change in_reset to atomic
rpmsg: glink: spi: Use irq safe spinlocks
rpmsg: glink: spi: Try to send rx done immediately
msm: camera: isp: support composite fence id
rpmsg: glink: spi: Cancel intent work in remove
rpmsg: glink: spi: Fix idr and channel refcounts
clk: qcom: clk-aop-qmp: use correct name pointer before clock registration
clk: qcom: gdsc-regulator: use mode control for disable skipping feature
ARM: dts: msm: specify AOP QMP mailbox for gpu_cx_gdsc on SM8150
clk: qcom: gdsc-regulator: add support for QMP-based GDSC enable
msm: camera: flash: Remove opcode reset for NOP operation
msm: ipa: Update MHI channel state on host after suspend
sched/fair: Allow idle local group to pull tasks from overloaded group
usb: phy: qmp: Remove portselect for USB3 only phy
ARM: dts: msm: Add dummy offset for MISC_TYPEC_CTRL on SM8150
lowmemorykiller: don't take scan_mutex lock when low on memory
rpmsg: glink: Fix use after free in open_ack TIMEOUT case
hung task: check specific tasks for long uninterruptible sleep state
wil6210: fix invalid memory access for rx_buff_mgmt debugfs
wil6210: add FT roam support for AP and station
wil6210: remove reset file from debugfs
mm: add a feedback from lowmemorykiller for OOM decisions
ARM: dts: msm: Update the min/max voltages for SA6155
ARM: dts: msm: Add qdss clk for llcc_perfmon on sm6150
Seemp: Logging each Kernel Protect Report only once
ARM: dts: msm: Add dt nodes to parse micbias voltage
ARM: dts: msm: updates to MDF entries to enable access control
msm: kgsl: Add a property to find if secure context is supported
msm: kgsl: Add a property to find alignment of secure buffers
sched: Improve the scheduler
ARM: dts: msm: Enable UFS support on sa6155 adp platform
power: smb5-lib: Fix floating cable IRQ storms
power: smb5-lib: support liquid presence detection
power: smb5-lib: Fix wireless property in reading wireless VOUT
msm: pcie: register PCI driver with framework for root port
ARM: dts: msm: Enable camera on SM6150 QRD
cnss2: Remove deprecated device IDs for emulation devices
cnss2: Use correct QMI instance ID
cnss2: Return error for QMI initialization failure
cnss2: Add QCA6390 device ID for cnss_get_bus_type()
kbuild: gcov: enable -fno-tree-loop-im if supported
ARM: dts: msm: revert DSI preferences change for sa8155
net: memset smsg to avoid the padding data
msm: ipa: Use Spinlock in GSI irq context
msm: camera: reqmgr: Remove mem_mgr init & deinit calls
sched/fair: Make sd_overutilized if cpu is overutilized
Revert "rpmsg: glink: spi: unregister rpdev during ept destroy"
soc: sm8150: Update SCT table as per new version
ARM: dts: msm: Add regulator and peripheral devices for SA6155
defconfig: sm6150: enable proxy consumer driver for regulators
msm: kgsl: Enable IO coherency for A608 GPU
msm: ipa: Adapt EE area registers for IPA4.5
MMC: Core: Fix reading ext_csd and status from debugfs
ARM: dts: msm: add proxy vote for DSI supplies for sm6150
msm_11ad: remove control of rf_clk3_pin if not defined in dts
ARM: dts: msm: Add proxy client node for SM6150
scsi: ufs: remove redundant code introduced from patch porting
ARM: dts: msm: Fix compilation issue with camera nodes on sm6150
ARM: dts: msm: change default panel for sm6150 command idp
ARM: dts: msm: Add LPM residency for sm8150/sm6150/sdmmagpie/qcs405
cpuidle: lpm-levels: Use static residency values
ARM: dts: msm: Remove S1 bypass of tmc for SM6150
power: qpnp-fg-gen4: Add support to configure Ki coefficient full SOC
power: qpnp-fg-gen4: Retry ESR fast calibration on a failed attempt
net: qrtr: Do not send packets before Hello negotiation
power: qpnp-fg-gen4: Add encoding function for FULL_SOC for PM8150B v2
ARM: dts: msm: Update SDCC Driver Strength Setting for sm8510
ARM: dts: msm: Enable device mode bus suspend on SM8150
msm: kgsl: Store the HFI bandwidth vote table locally
msm: ipa: Update IPA_UC_MAILBOX_m_n register offset
msm: ipa: Update header register configuration for ipa4.5
ARM: dts: msm: Add Proper id for swr bus instances for sm6150
ARM: dts: msm: Add glink-label in glink_spi_xprt for sm6150
ARM: dts: msm: Extend GFX register offset for SM6150
ARM: dts: msm: Add CDSP to the master list in rpm master stats for qcs405
defconfig: msm: Enable HSUART, I2C, Slimbus for 32-bit QCS405
msm: kgsl: Fix kgsl_clk_set_rate warning message
ARM: dts: msm: Add EUD support for SM6150
ARM: dts: msm: remove rf_clk3_pin_clk in wil6210 node for sm8150
ARM: dts: msm: enable ESD for td4328 panel on sm6150
ARM: dts: msm: extend GPU DCVS table to 5 entries
msm: camera: Correct csiphy register settings
msm: vidc: fix clock rate selection in multiple sessions
msm: camera: icp: Execute irq callbacks with locks
ARM: dts: msm: Add modem thermal sensors for SM8150 fusion
defconfig: sm8150: Enable QMI based thermal sensor driver
drivers: thermal: qmi-sensor: Add driver to interface with QMI sensor
usb: dwc3: Change TXFIFO size for GSI IN EP based on controller
ARM: dts: msm: Update glink-lable string for wcnss
defconfig: arm64: Enable PAGE_POISONING_ENABLE_DEFAULT for sm8150
ARM: dts: msm: Enable UFS support on sdmmagpie
ARM: dts: msm: enable display rsc for sm6150
msm: camera: Disable camif sof irq logs
soc: qcom: glink_probe: Return if rpmsg_send fails
rpmsg: glink: Add reset status
rpmsg: glink: Try to send rx done in irq
clk: qcom: gpucc-sm8150: mark gpu_cc_ahb_clk as critical
msm: camera: isp: manage wait list properly
usb: f_gsi: Resume USB on handling disconnect event in suspend state
msm: kgsl: Snapshot the correct amount of CP ROQ data
msm: kgsl: Correct A608 CP mempool size
diag: Handle connection reset error
msm: camera: sync: Add warning logs
msm: camera: cci: Fix burst read sequence
ARM: dts: msm: Correct JPEG sid value for SM6150
msm: kgsl: Enable GMU power counters if accessible
soc: qcom: pil: Avoid memory leaks by releasing the firmware resources
msm: camera: icp: Change log type
msm: kgsl: Avoid out of bound register access for A6xx
msm: camera: crm: Force unreserve link
USB: f_fs: Disable USB LPM on bus_suspend with ADB
msm: kgsl: Print process name on pagefault
net: qualcomm: rmnet: Skip processing loopback packets
msm: kgsl: Count finished preemptions
ARM: dts: qcom: Add second modem mitigation devices for SM8150 fusion
spi-geni-qcom: Set DMA mask to support 64 bit DMA
spi-geni-qcom: Support to disable runtime PM autosuspend
clk: qcom: npucc-sm8150: specify external parents for NPU_CC branch clocks
ARM: dts: msm: Reduce the size of shared region for sm8150
usb: pd: allow outgoing requests after receiving status payload
usb: pd: combine into PE_SEND_SOFT_RESET
defconfig: msm: Enable minidump support for SM6150 target
msm: kgsl: Overwrite the existing snapshot only if GMU is enabled
msm: ipa: Fix to add string NULL terminator
Change-Id: I552c8948c1aa35c839aa370df8bc22d67f685ed5
Signed-off-by:
Namratha Siddappa <namratha@codeaurora.org>
Loading
Please register or sign in to comment