DOWNSTREAM commit '7c269f67' AU307 08/20

* commit '7c269f67':
  i2c-qcom-geni: Handle corner cases in GSI transfer
  i2c-qcom-geni: Calculate transfer timeout based on payload size
  mmc: card: Call blk_requeue_request() with queue-lock held
  socinfo: msm: Give name to IDP hw platformid
  power: qpnp-qg: Fix the return error check in QGauge
  ARM: dts: msm: Fix spmi address cells and battery data specs for sm6150
  power: Add power supply property to force recharge
  ARM: dts: msm: Update the QG SDAM address and enable capacity learning
  ARM: dts: msm: Update VADC support for PM6150
  power: qpnp-qg: Add support for PM6150 Qgauge
  drm/msm/dp: return number of displays as 0 if dp node is disabled
  mmc: core: Return SD card status if sdr104_wa is not present
  ipa: update wlan upstream iface name
  ARM: dts: msm: add sde node for SM6150 target
  ARM: dts: msm: Add V1 to msm-name property for SM8150 V1
  diag: Fix for diag communication during SSR
  net: qualcomm: rmnet: shs deliver return
  diag: Don't queue read to usb during disconnect
  pfk: keymaster support to set/clear ice keys
  sched: walt: fix out-of-bounds access
  ARM: dts: msm: add Himax Touch panel support for SM6150
  defconfig: msm: enable PBS, VIBRATOR and MISC drivers for sm6150
  power: smb5-lib: Fix USBIN Under-Voltage Lock-out issue
  defconfig: msm: Enable Cx ipeak driver for sdmsteppe
  defconfig: qcs405: Remove symlink to defconfigs in vendor subdirectory
  ARM: dts: msm: Update MX retention vote during VDD restriction for QCS405
  msm: ipa: Add WLAN FW SSR event
  clk: qcom: gcc: Add new frequency table for gcc_emac_ptp_clk_src
  mmc: core: Return card status if sdr104_wa is not present
  ARM: dts: msm: Add device tree for sa6155 and sa6155p
  defconfig: Enable GCC and VIDEOCC drivers for SDMMAGPIE
  ARM: dts: msm: Update the gcc and video clock nodes for SDMMAGPIE
  power: smb5-lib: Add liquid presence detection function
  clk: qcom: Add support for Video clock controller for SDMMAGPIE
  net: qualcomm: rmnet: Add support to reset ethtool private stats
  power: smb1390: add wireless charging support
  power: smb5: enable smb1390 Wireless charging
  power: smb5-lib: Add wireless support in DC psy
  power: qpnp-fg-gen4: Disable ESR pulsing when fast calibration is disabled
  ARM: dts: msm: Add device tree property to collect full ramdumps
  Revert "ARM: dts: msm: disable L1/L1ss for PCIe1 on sm8150-sdx50 platform"
  msm: npu: refactor npu_map_buf/npu_unmap_buf functions
  msm: npu: Add asynchronous ioctl support
  msm: kgsl: Enable preemption for A608 GPU
  power: smb5: support smb_en_reason property in USB psy
  mmc: core: Invoke mmc_power_up/off with claim_host acquired
  power: smb5: add support to export "POWER_SUPPLY_PROP_CHARGE_FULL"
  cnss2: Include kernel QMI header file in correct place
  defconfig: disable HAVE_LOW_MEMORY_KILLER on SA8155
  regulator: fan53555: add support to disable suspend voltage configuration
  regulator: fan53555: add support for Halo HL7509 buck converter
  regulator: fan53555: change fan53555_parse_dt() to read only DT parameters
  ARM: dts: msm: add mdf memory region on qcs405
  ARM: dts: msm: Add audio routing for sm6150 idp variant
  power: smb5-lib: Initialize nodes for SBUx and VPH_PWR channel
  ARM: dts: msm: specify SBUx and VPH_PWR channel on MTP and QRD
  msm: kgsl: Don't halt dispatcher if device is not in SUSPEND state
  clk: qcom: clk-alpha-pll: Add support for configuring fabia PLL
  soc: qcom: dcc_v2: Change HW trigger setting for secure DCC
  defconfig: qcs405: Enable ADC configs for QCS405
  mailbox: apcs-ipc: Set suppress_bind_attrs
  defconfig: sa8155: align with android config requirement
  ARM: dts: msm: set prop to specify smmu mapping range for dpu in sm8150 v2
  ARM: dts: msm: Restrict GPU max power level
  ARM: dts: msm: set property for SDE rotator smmu mapping range in sm8150 v2
  mailbox: msm_qmp: Do not reset channel open state
  msm: ipa: Update IPA_SRAM_DIRECT_ACCESS_n for IPA4.5
  msm: ipa: Support IPA4.5 new time scheme
  [media] v4l: Add V4L2_PIX_FMT_NV12_512 color format
  msm: vidc: Update work route and power save mode for HEIC
  Documentation: sound: Add documentation for MDF nodes
  msm: kgsl: Store GMU firmware image in the GMU device structure
  nohz: Fix local_timer_softirq_pending()
  net: wireless: add 60GHz band for Turkey
  thermal: tsens: Add debug hooks for logging temperature reads and IRQs
  defconfig: msm: Enable GENI-IR Driver on QCS405
  ARM: dts: msm: Fix the core numbering in sm6150
  msm: ipa: Fix to validate the filter action
  defconfig: msm: Enable DSU PMU support for sm6150
  ARM: dts: msm: Add msm-id for QRD variant of SM6150P
  ARM: dts: msm: Add support for complete subsystem ramdump for SM6150
  ARM: dts: msm: add DSU PMU support for sm6150
  ARM: dts: msm: Add new platforms for SM6150 SoC
  ARM: dts: msm: Enable VBIF bus governor for SM6150 GPU
  thermal: adc_tm: Add support to register channels without trips
  ARM: dtsi: add audio dt file for sa8155 auto platform
  power: qpnp-qg: Skip reading battery-temp in the resume path
  drm/msm/sde: handle pm_resume commit correctly
  ANDROID: sched/events: Introduce util_est trace events
  ANDROID: sched/fair: schedtune: update before schedutil
  FROMLIST: sched/fair: add support to tune PELT ramp/decay timings
  BACKPORT: sched/fair: Update util_est before updating schedutil
  BACKPORT: sched/fair: Update util_est only on util_avg updates
  BACKPORT: sched/fair: Use util_est in LB and WU paths
  BACKPORT: sched/fair: Add util_est on top of PELT
  ANDROID: sched/fair: Cleanup cpu_util{_wake}()
  ANDROID: sched: Update max cpu capacity in case of max frequency constraints
  stop_machine: Atomically queue and wake stopper threads
  ANDROID: arm: enable max frequency capping
  ANDROID: arm64: enable max frequency capping
  ANDROID: implement max frequency capping
  ANDROID: sched/fair: add arch scaling function for max frequency capping
  ANDROID: trace: Add WALT util signal to trace event sched_load_cfs_rq
  ANDROID: sched, trace: Remove trace event sched_load_avg_cpu
  ANDROID: Rename and move include/linux/sched_energy.h
  ANDROID: Adjust juno energy model
  ARM: dts: msm: Add audio overlay for SM8150+SDX50M
  msm: ipa: Early assert for invalid event ring Read Pointer
  ARM:dts:msm Add ADC_TM node, channels and thermal zones on QCS405
  ARM: dts: msm: Enable QSYNC feature for QRD SM8150 panel
  usb: dwc3: Improve future uF number calculation
  usb: dwc3: gadget: always use frame number from XferNotReady
  usb: dwc3: gadget: cache frame number in struct dwc3_ep
  USB: pd: Send PS_RDY within tNewSrc after PS_RDY received
  cnss2: Support new QMI framework
  usb: pd: Keep separate counters for tx/rx msgid
  ARM: dts: msm: reserve LM0/1 for primary disp on SM8150
  tcp: add tcp_ooo_try_coalesce() helper
  tcp: call tcp_drop() from tcp_data_queue_ofo()
  tcp: detect malicious patterns in tcp_collapse_ofo_queue()
  tcp: avoid collapses in tcp_prune_queue() if possible
  tcp: free batches of packets in tcp_prune_ofo_queue()
  defconfig: Enable SSR notification timeouts on SM8150
  soc: qcom: pil: Incorporate timeouts for notifications
  drm/msm/sde: add traces to track display kickoff
  qseecom: change check_blocked flag to an u32 value
  ARM: dts: msm: Enable I2C bus for CSRA66X0 playback on QCS405 platform
  ARM: dts: msm: Modify SMB1390 and SMB1355 device specification
  ARM: dts: msm: Add a new display panel support for SDM710 QRD
  diag: Modify md_info and diag client map synchronization
  ARM: dts: msm: Add GENI-IR node.
  media: rc: GENI-IR controller driver
  ARM: dts: msm: update default topology for simulator cmd mode
  drm/msm/dsi-staging: add software simulation states to esd check mode
  drm/msm/sde: avoid secure-camera/secure-ui concurrency with other displays
  bridge: Add bridge API to access the bridge slave port
  msm: net: Add support to packet threshold events.
  ARM: dts: msm: Update the fmax corners for CPU for QCS405
  ARM: dts: msm: Add initial device tree support for SM6150P
  drm/msm/sde: avoid lock while dumping fence status
  msm:ipa3: code changes to support WDI2 offload over GSI
  diag: Protect md_info structure while reallocation
  diag: Featurize IPC logging under IPC_LOGGING config
  drm/msm/dsi-staging: handoff backlight level for cont splash
  USB: dwc3: Fix issues in ISOC endpoint handling
  power: smb5: Fix incorrect QC2.0 pulse count enum values
  drm/msm: handle link failure in hdcp
  drm/msm/sde: program color fill in planes in failure at commit stage
  drm/msm/sde: Fix 32-bit compilation issues
  ARM: dts: msm: Update the dcvs frequency tables for SM8150 v2
  drm/msm/sde: print debugfs input for command transfer
  drm/msm/dsi-staging: add logs for debugfs nodes
  drm/msm/sde: increase ahb bus vote on first frame
  drm/msm/sde: prevent clearing multirect flags during validate failure
  drm/msm/sde: Increase command mode idle timeout in early wake-up
  drm/msm/sde: Use kthread API to initialize idle delay work
  drm/msm/sde: ensure qsync settings are properly flushed
  msm: vidc: do not set video state to DEINIT very early
  msm: sde: avoid segmentation of dma_buf mappings
  drm/msm/sde: set the qsync/avr mode during encoder enable
  soc: qcom: Add support for Cx iPeak limit driver
  defconfig: sm8150: Build uncompressed kernel image
  ARM: dts: msm: Add ion secure carveout for sm8150
  slim-msm: Use non-interruptible method for all QMI wait
  ARM: dts: msm: Update sm8150 to V8 memory map
  ARM: dts: msm: Enable secondary USB port for sm8150

Change-Id: If5b6f2273e92fcfac45a4046ddffc2d9e973e8ea
Signed-off-by: Harsh Shah <harshs@codeaurora.org>