serial/mpc52xx_uart: Drop outdated comments

 * kind, whether express or implied.

 */

/* Platform device Usage :

 *

 * Since PSCs can have multiple function, the correct driver for each one

 * is selected by calling mpc52xx_match_psc_function(...). The function

 * handled by this driver is "uart".

 *

 * The driver init all necessary registers to place the PSC in uart mode without

 * DCD. However, the pin multiplexing aren't changed and should be set either

 * by the bootloader or in the platform init code.

 *

 * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2,

 * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and

 * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly

 * fpr the console code : without this 1:1 mapping, at early boot time, when we

 * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it

 * will be mapped to.

 */

/* OF Platform device Usage :

 *

 * This driver is only used for PSCs configured in uart mode.  The device

 * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible

 * list.

 *

 * By default, PSC devices are enumerated in the order they are found.  However

 * a particular PSC number can be forces by adding 'device_no = <port#>'

 * to the device node.

 *

 * The driver init all necessary registers to place the PSC in uart mode without

 * DCD. However, the pin multiplexing aren't changed and should be set either

 * by the bootloader or in the platform init code.

 */

#undef DEBUG

#include <linux/device.h>