Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 0f3445dc authored by Linux Build Service Account's avatar Linux Build Service Account Committed by Gerrit - the friendly Code Review server
Browse files

Merge "ARM: dts: msm: Add camera DTSI files for 8937"

parents 8dda1457 c09f23ff

Documentation/devicetree/bindings/media/video/msm-csi-phy.txt

+1 −0
Original line number Diff line number Diff line
@@ -10,6 +10,7 @@ Required properties: 
    - "qcom,csiphy-v3.1"

    - "qcom,csiphy-v3.1.1"

    - "qcom,csiphy-v3.2"

    - "qcom,csiphy-v3.4.2"

    - "qcom,csiphy-v3.5"

- reg : offset and length of the register set for the device

    for the csiphy operating in compatible mode.

Documentation/devicetree/bindings/media/video/msm-csid.txt

+1 −0
Original line number Diff line number Diff line
@@ -11,6 +11,7 @@ Required properties: 
    - "qcom,csid-v3.2"

    - "qcom,csid-v3.5"

    - "qcom,csid-v4.0"

    - "qcom,csid-v3.4.2"

- reg : offset and length of the register set for the device

    for the csid operating in compatible mode.

- reg-names : should specify relevant names to each reg property defined.

arch/arm/boot/dts/qcom/msm8937-camera-sensor-cdp.dtsi

0 → 100644
+270 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2015, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

	};



	actuator1: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

	};



	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0x0>;

		qcom,eeprom-name = "le2464c";

		compatible = "qcom,eeprom";

		qcom,slave-addr = <0xa0>;

		qcom,cci-master = <0>;

		qcom,num-blocks = <1>;



		qcom,page0 = <0 0 0 0 0 0>;

		qcom,poll0 = <0 0 0 0 0 0>;

		qcom,saddr0 = <0xa0>;

		qcom,mem0 = <8192 0x0000 2 0 1 0>;



		cam_vio-supply = <&pm8937_l6>;

		qcom,cam-vreg-name = "cam_vio";

		qcom,cam-vreg-min-voltage = <0>;

		qcom,cam-vreg-max-voltage = <0>;

		qcom,cam-vreg-op-mode = <0>;

		qcom,cam-power-seq-type = "sensor_vreg";

		qcom,cam-power-seq-val = "cam_vio";

		qcom,cam-power-seq-cfg-val = <1>;

		qcom,cam-power-seq-delay = <1>;

		status = "ok";

	};



	eeprom1: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		qcom,eeprom-name = "sunny_8865";

		compatible = "qcom,eeprom";

		qcom,slave-addr = <0x6c>;

		qcom,cci-master = <0>;

		qcom,num-blocks = <8>;



		qcom,page0 = <1 0x0100 2 0x01 1 1>;

		qcom,poll0 = <0 0x0 2 0x0 1 0>;

		qcom,mem0 = <0 0x0 2 0x0 1 0>;



		qcom,page1 = <1 0x5002 2 0x00 1 0>;

		qcom,poll1 = <0 0x0 2 0x0 1 0>;

		qcom,mem1 = <0 0x0 2 0x0 1 0>;



		qcom,page2 = <1 0x3d84 2 0xc0 1 0>;

		qcom,poll2 = <0 0x0 2 0x0 1 0>;

		qcom,mem2 = <0 0x0 2 0x0 1 0>;



		qcom,page3 = <1 0x3d88 2 0x70 1 0>;

		qcom,poll3 = <0 0x0 2 0x0 1 0>;

		qcom,mem3 = <0 0x0 2 0x0 1 0>;



		qcom,page4 = <1 0x3d89 2 0x10 1 0>;

		qcom,poll4 = <0 0x0 2 0x0 1 0>;

		qcom,mem4 = <0 0x0 2 0x0 1 0>;



		qcom,page5 = <1 0x3d8a 2 0x70 1 0>;

		qcom,poll5 = <0 0x0 2 0x0 1 0>;

		qcom,mem5 = <0 0x0 2 0x0 1 0>;



		qcom,page6 = <1 0x3d8b 2 0xf4 1 0>;

		qcom,poll6 = <0 0x0 2 0x0 1 0>;

		qcom,mem6 = <0 0x0 2 0x0 1 0>;



		qcom,page7 = <1 0x3d81 2 0x01 1 10>;

		qcom,poll7 = <0 0x0 2 0x0 1 1>;

		qcom,mem7 = <1536 0x7010 2 0 1 0>;



		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

			"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

			&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep &cam_sensor_front1_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 40 0>,

			<&tlmm 39 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,cam-power-seq-type = "sensor_vreg", "sensor_vreg",

			"sensor_vreg",

			"sensor_gpio", "sensor_gpio" , "sensor_clk";

		qcom,cam-power-seq-val = "cam_vdig", "cam_vana", "cam_vio",

			"sensor_gpio_reset", "sensor_gpio_standby",

			"sensor_cam_mclk";

		qcom,cam-power-seq-cfg-val = <1 1 1 1 1 24000000>;

		qcom,cam-power-seq-delay = <1 1 1 30 30 5>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk2_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <270>;

		qcom,eeprom-src = <&eeprom0>;

		qcom,actuator-src = <&actuator0>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vaf";

		qcom,cam-vreg-min-voltage = <0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default

				&cam_sensor_rear_default

				&cam_sensor_rear_vdig>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep

				&cam_sensor_rear_vdig_sleep>;

		gpios = <&tlmm 26 0>,

			<&tlmm 36 0>,

			<&tlmm 35 0>,

			<&tlmm 62 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-vdig = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

			"CAM_RESET0",

			"CAM_STANDBY0",

			"CAM_VDIG";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

							"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_default

				&cam_sensor_front_default>;

		pinctrl-1 = <&cam_sensor_mclk1_sleep

				&cam_sensor_front_sleep>;

		gpios = <&tlmm 27 0>,

			<&tlmm 38 0>,

			<&tlmm 37 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

			"CAM_RESET1",

			"CAM_STANDBY1";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "disabled";

		clocks = <&clock_gcc clk_mclk1_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		qcom,eeprom-src = <&eeprom1>;

		qcom,actuator-src = <&actuator1>;

		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

					"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

				&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep

				&cam_sensor_front1_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 40 0>,

			<&tlmm 39 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk2_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};

};

arch/arm/boot/dts/qcom/msm8937-camera-sensor-mtp.dtsi

0 → 100644
+270 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2015, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

	};



	actuator1: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

	};



	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0x0>;

		qcom,eeprom-name = "le2464c";

		compatible = "qcom,eeprom";

		qcom,slave-addr = <0xa0>;

		qcom,cci-master = <0>;

		qcom,num-blocks = <1>;



		qcom,page0 = <0 0 0 0 0 0>;

		qcom,poll0 = <0 0 0 0 0 0>;

		qcom,saddr0 = <0xa0>;

		qcom,mem0 = <8192 0x0000 2 0 1 0>;



		cam_vio-supply = <&pm8937_l6>;

		qcom,cam-vreg-name = "cam_vio";

		qcom,cam-vreg-min-voltage = <0>;

		qcom,cam-vreg-max-voltage = <0>;

		qcom,cam-vreg-op-mode = <0>;

		qcom,cam-power-seq-type = "sensor_vreg";

		qcom,cam-power-seq-val = "cam_vio";

		qcom,cam-power-seq-cfg-val = <1>;

		qcom,cam-power-seq-delay = <1>;

		status = "ok";

	};



	eeprom1: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		qcom,eeprom-name = "sunny_8865";

		compatible = "qcom,eeprom";

		qcom,slave-addr = <0x6c>;

		qcom,cci-master = <0>;

		qcom,num-blocks = <8>;



		qcom,page0 = <1 0x0100 2 0x01 1 1>;

		qcom,poll0 = <0 0x0 2 0x0 1 0>;

		qcom,mem0 = <0 0x0 2 0x0 1 0>;



		qcom,page1 = <1 0x5002 2 0x00 1 0>;

		qcom,poll1 = <0 0x0 2 0x0 1 0>;

		qcom,mem1 = <0 0x0 2 0x0 1 0>;



		qcom,page2 = <1 0x3d84 2 0xc0 1 0>;

		qcom,poll2 = <0 0x0 2 0x0 1 0>;

		qcom,mem2 = <0 0x0 2 0x0 1 0>;



		qcom,page3 = <1 0x3d88 2 0x70 1 0>;

		qcom,poll3 = <0 0x0 2 0x0 1 0>;

		qcom,mem3 = <0 0x0 2 0x0 1 0>;



		qcom,page4 = <1 0x3d89 2 0x10 1 0>;

		qcom,poll4 = <0 0x0 2 0x0 1 0>;

		qcom,mem4 = <0 0x0 2 0x0 1 0>;



		qcom,page5 = <1 0x3d8a 2 0x70 1 0>;

		qcom,poll5 = <0 0x0 2 0x0 1 0>;

		qcom,mem5 = <0 0x0 2 0x0 1 0>;



		qcom,page6 = <1 0x3d8b 2 0xf4 1 0>;

		qcom,poll6 = <0 0x0 2 0x0 1 0>;

		qcom,mem6 = <0 0x0 2 0x0 1 0>;



		qcom,page7 = <1 0x3d81 2 0x01 1 10>;

		qcom,poll7 = <0 0x0 2 0x0 1 1>;

		qcom,mem7 = <1536 0x7010 2 0 1 0>;



		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

			"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

			&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep &cam_sensor_front1_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 40 0>,

			<&tlmm 39 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,cam-power-seq-type = "sensor_vreg", "sensor_vreg",

			"sensor_vreg",

			"sensor_gpio", "sensor_gpio" , "sensor_clk";

		qcom,cam-power-seq-val = "cam_vdig", "cam_vana", "cam_vio",

			"sensor_gpio_reset", "sensor_gpio_standby",

			"sensor_cam_mclk";

		qcom,cam-power-seq-cfg-val = <1 1 1 1 1 24000000>;

		qcom,cam-power-seq-delay = <1 1 1 30 30 5>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk2_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <270>;

		qcom,eeprom-src = <&eeprom0>;

		qcom,actuator-src = <&actuator0>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vaf";

		qcom,cam-vreg-min-voltage = <0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default

				&cam_sensor_rear_default

				&cam_sensor_rear_vdig>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep

				&cam_sensor_rear_vdig_sleep>;

		gpios = <&tlmm 26 0>,

			<&tlmm 36 0>,

			<&tlmm 35 0>,

			<&tlmm 62 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-vdig = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

			"CAM_RESET0",

			"CAM_STANDBY0",

			"CAM_VDIG";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

							"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_default

				&cam_sensor_front_default>;

		pinctrl-1 = <&cam_sensor_mclk1_sleep

				&cam_sensor_front_sleep>;

		gpios = <&tlmm 27 0>,

			<&tlmm 38 0>,

			<&tlmm 37 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

			"CAM_RESET1",

			"CAM_STANDBY1";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "disabled";

		clocks = <&clock_gcc clk_mclk1_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		qcom,eeprom-src = <&eeprom1>;

		qcom,actuator-src = <&actuator1>;

		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

					"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

				&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep

				&cam_sensor_front1_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 40 0>,

			<&tlmm 39 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk2_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};

};

arch/arm/boot/dts/qcom/msm8937-camera.dtsi

0 → 100644
+506 −0

File added.

Preview size limit exceeded, changes collapsed.