Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit c09f23ff authored by Vijay kumar Tumati's avatar Vijay kumar Tumati Committed by Kui Wang
Browse files

ARM: dts: msm: Add camera DTSI files for 8937 



Adding new files with nodes for all camera
hardware like ISP, CPP, CSID, CSIPHY etc. and
adding logical nodes for external sensors with
all the required voltage regulators and gpios.
Also, add camera nodes to pin control file.

Change-Id: I4380e8ee15fbe98b9817994b8d37bf6527490170
Signed-off-by: default avatarVijay kumar Tumati <vtumati@codeaurora.org>
Signed-off-by: default avatarAbhishek Kondaveeti <akondave@codeaurora.org>
parent bfbfa771

Documentation/devicetree/bindings/media/video/msm-csi-phy.txt

+1 −0
Original line number Diff line number Diff line
@@ -10,6 +10,7 @@ Required properties: 
    - "qcom,csiphy-v3.1"

    - "qcom,csiphy-v3.1.1"

    - "qcom,csiphy-v3.2"

    - "qcom,csiphy-v3.4.2"

    - "qcom,csiphy-v3.5"

- reg : offset and length of the register set for the device

    for the csiphy operating in compatible mode.

Documentation/devicetree/bindings/media/video/msm-csid.txt

+1 −0
Original line number Diff line number Diff line
@@ -11,6 +11,7 @@ Required properties: 
    - "qcom,csid-v3.2"

    - "qcom,csid-v3.5"

    - "qcom,csid-v4.0"

    - "qcom,csid-v3.4.2"

- reg : offset and length of the register set for the device

    for the csid operating in compatible mode.

- reg-names : should specify relevant names to each reg property defined.

arch/arm/boot/dts/qcom/msm8937-camera-sensor-cdp.dtsi

0 → 100644
+270 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2015, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

	};



	actuator1: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

	};



	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0x0>;

		qcom,eeprom-name = "le2464c";

		compatible = "qcom,eeprom";

		qcom,slave-addr = <0xa0>;

		qcom,cci-master = <0>;

		qcom,num-blocks = <1>;



		qcom,page0 = <0 0 0 0 0 0>;

		qcom,poll0 = <0 0 0 0 0 0>;

		qcom,saddr0 = <0xa0>;

		qcom,mem0 = <8192 0x0000 2 0 1 0>;



		cam_vio-supply = <&pm8937_l6>;

		qcom,cam-vreg-name = "cam_vio";

		qcom,cam-vreg-min-voltage = <0>;

		qcom,cam-vreg-max-voltage = <0>;

		qcom,cam-vreg-op-mode = <0>;

		qcom,cam-power-seq-type = "sensor_vreg";

		qcom,cam-power-seq-val = "cam_vio";

		qcom,cam-power-seq-cfg-val = <1>;

		qcom,cam-power-seq-delay = <1>;

		status = "ok";

	};



	eeprom1: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		qcom,eeprom-name = "sunny_8865";

		compatible = "qcom,eeprom";

		qcom,slave-addr = <0x6c>;

		qcom,cci-master = <0>;

		qcom,num-blocks = <8>;



		qcom,page0 = <1 0x0100 2 0x01 1 1>;

		qcom,poll0 = <0 0x0 2 0x0 1 0>;

		qcom,mem0 = <0 0x0 2 0x0 1 0>;



		qcom,page1 = <1 0x5002 2 0x00 1 0>;

		qcom,poll1 = <0 0x0 2 0x0 1 0>;

		qcom,mem1 = <0 0x0 2 0x0 1 0>;



		qcom,page2 = <1 0x3d84 2 0xc0 1 0>;

		qcom,poll2 = <0 0x0 2 0x0 1 0>;

		qcom,mem2 = <0 0x0 2 0x0 1 0>;



		qcom,page3 = <1 0x3d88 2 0x70 1 0>;

		qcom,poll3 = <0 0x0 2 0x0 1 0>;

		qcom,mem3 = <0 0x0 2 0x0 1 0>;



		qcom,page4 = <1 0x3d89 2 0x10 1 0>;

		qcom,poll4 = <0 0x0 2 0x0 1 0>;

		qcom,mem4 = <0 0x0 2 0x0 1 0>;



		qcom,page5 = <1 0x3d8a 2 0x70 1 0>;

		qcom,poll5 = <0 0x0 2 0x0 1 0>;

		qcom,mem5 = <0 0x0 2 0x0 1 0>;



		qcom,page6 = <1 0x3d8b 2 0xf4 1 0>;

		qcom,poll6 = <0 0x0 2 0x0 1 0>;

		qcom,mem6 = <0 0x0 2 0x0 1 0>;



		qcom,page7 = <1 0x3d81 2 0x01 1 10>;

		qcom,poll7 = <0 0x0 2 0x0 1 1>;

		qcom,mem7 = <1536 0x7010 2 0 1 0>;



		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

			"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

			&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep &cam_sensor_front1_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 40 0>,

			<&tlmm 39 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,cam-power-seq-type = "sensor_vreg", "sensor_vreg",

			"sensor_vreg",

			"sensor_gpio", "sensor_gpio" , "sensor_clk";

		qcom,cam-power-seq-val = "cam_vdig", "cam_vana", "cam_vio",

			"sensor_gpio_reset", "sensor_gpio_standby",

			"sensor_cam_mclk";

		qcom,cam-power-seq-cfg-val = <1 1 1 1 1 24000000>;

		qcom,cam-power-seq-delay = <1 1 1 30 30 5>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk2_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <270>;

		qcom,eeprom-src = <&eeprom0>;

		qcom,actuator-src = <&actuator0>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vaf";

		qcom,cam-vreg-min-voltage = <0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default

				&cam_sensor_rear_default

				&cam_sensor_rear_vdig>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep

				&cam_sensor_rear_vdig_sleep>;

		gpios = <&tlmm 26 0>,

			<&tlmm 36 0>,

			<&tlmm 35 0>,

			<&tlmm 62 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-vdig = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

			"CAM_RESET0",

			"CAM_STANDBY0",

			"CAM_VDIG";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

							"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_default

				&cam_sensor_front_default>;

		pinctrl-1 = <&cam_sensor_mclk1_sleep

				&cam_sensor_front_sleep>;

		gpios = <&tlmm 27 0>,

			<&tlmm 38 0>,

			<&tlmm 37 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

			"CAM_RESET1",

			"CAM_STANDBY1";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "disabled";

		clocks = <&clock_gcc clk_mclk1_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		qcom,eeprom-src = <&eeprom1>;

		qcom,actuator-src = <&actuator1>;

		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

					"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

				&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep

				&cam_sensor_front1_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 40 0>,

			<&tlmm 39 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk2_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};

};

arch/arm/boot/dts/qcom/msm8937-camera-sensor-mtp.dtsi

0 → 100644
+270 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2015, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

	};



	actuator1: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

	};



	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0x0>;

		qcom,eeprom-name = "le2464c";

		compatible = "qcom,eeprom";

		qcom,slave-addr = <0xa0>;

		qcom,cci-master = <0>;

		qcom,num-blocks = <1>;



		qcom,page0 = <0 0 0 0 0 0>;

		qcom,poll0 = <0 0 0 0 0 0>;

		qcom,saddr0 = <0xa0>;

		qcom,mem0 = <8192 0x0000 2 0 1 0>;



		cam_vio-supply = <&pm8937_l6>;

		qcom,cam-vreg-name = "cam_vio";

		qcom,cam-vreg-min-voltage = <0>;

		qcom,cam-vreg-max-voltage = <0>;

		qcom,cam-vreg-op-mode = <0>;

		qcom,cam-power-seq-type = "sensor_vreg";

		qcom,cam-power-seq-val = "cam_vio";

		qcom,cam-power-seq-cfg-val = <1>;

		qcom,cam-power-seq-delay = <1>;

		status = "ok";

	};



	eeprom1: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		qcom,eeprom-name = "sunny_8865";

		compatible = "qcom,eeprom";

		qcom,slave-addr = <0x6c>;

		qcom,cci-master = <0>;

		qcom,num-blocks = <8>;



		qcom,page0 = <1 0x0100 2 0x01 1 1>;

		qcom,poll0 = <0 0x0 2 0x0 1 0>;

		qcom,mem0 = <0 0x0 2 0x0 1 0>;



		qcom,page1 = <1 0x5002 2 0x00 1 0>;

		qcom,poll1 = <0 0x0 2 0x0 1 0>;

		qcom,mem1 = <0 0x0 2 0x0 1 0>;



		qcom,page2 = <1 0x3d84 2 0xc0 1 0>;

		qcom,poll2 = <0 0x0 2 0x0 1 0>;

		qcom,mem2 = <0 0x0 2 0x0 1 0>;



		qcom,page3 = <1 0x3d88 2 0x70 1 0>;

		qcom,poll3 = <0 0x0 2 0x0 1 0>;

		qcom,mem3 = <0 0x0 2 0x0 1 0>;



		qcom,page4 = <1 0x3d89 2 0x10 1 0>;

		qcom,poll4 = <0 0x0 2 0x0 1 0>;

		qcom,mem4 = <0 0x0 2 0x0 1 0>;



		qcom,page5 = <1 0x3d8a 2 0x70 1 0>;

		qcom,poll5 = <0 0x0 2 0x0 1 0>;

		qcom,mem5 = <0 0x0 2 0x0 1 0>;



		qcom,page6 = <1 0x3d8b 2 0xf4 1 0>;

		qcom,poll6 = <0 0x0 2 0x0 1 0>;

		qcom,mem6 = <0 0x0 2 0x0 1 0>;



		qcom,page7 = <1 0x3d81 2 0x01 1 10>;

		qcom,poll7 = <0 0x0 2 0x0 1 1>;

		qcom,mem7 = <1536 0x7010 2 0 1 0>;



		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

			"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

			&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep &cam_sensor_front1_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 40 0>,

			<&tlmm 39 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,cam-power-seq-type = "sensor_vreg", "sensor_vreg",

			"sensor_vreg",

			"sensor_gpio", "sensor_gpio" , "sensor_clk";

		qcom,cam-power-seq-val = "cam_vdig", "cam_vana", "cam_vio",

			"sensor_gpio_reset", "sensor_gpio_standby",

			"sensor_cam_mclk";

		qcom,cam-power-seq-cfg-val = <1 1 1 1 1 24000000>;

		qcom,cam-power-seq-delay = <1 1 1 30 30 5>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk2_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <270>;

		qcom,eeprom-src = <&eeprom0>;

		qcom,actuator-src = <&actuator0>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vaf";

		qcom,cam-vreg-min-voltage = <0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default

				&cam_sensor_rear_default

				&cam_sensor_rear_vdig>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep

				&cam_sensor_rear_vdig_sleep>;

		gpios = <&tlmm 26 0>,

			<&tlmm 36 0>,

			<&tlmm 35 0>,

			<&tlmm 62 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-vdig = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

			"CAM_RESET0",

			"CAM_STANDBY0",

			"CAM_VDIG";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

							"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_default

				&cam_sensor_front_default>;

		pinctrl-1 = <&cam_sensor_mclk1_sleep

				&cam_sensor_front_sleep>;

		gpios = <&tlmm 27 0>,

			<&tlmm 38 0>,

			<&tlmm 37 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

			"CAM_RESET1",

			"CAM_STANDBY1";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "disabled";

		clocks = <&clock_gcc clk_mclk1_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		qcom,eeprom-src = <&eeprom1>;

		qcom,actuator-src = <&actuator1>;

		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

					"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

				&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep

				&cam_sensor_front1_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 40 0>,

			<&tlmm 39 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk2_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};

};

arch/arm/boot/dts/qcom/msm8937-camera.dtsi

0 → 100644
+506 −0

File added.

Preview size limit exceeded, changes collapsed.