staging: qcacld-3.0: Merge CAF tag LA.UM.8.4.r1-05300-8x98.0

* tag 'LA.UM.8.4.r1-05300-8x98.0':
  qcacld-3.0: Set power save enable directly to FW
  qcacld-3.0: Fix compilation error related to NAN
  Release 5.2.03.20Y
  qcacld-3.0: Enable 6GHz feature for WHUNT
  qcacld-3.0: Fix compile errors of WLAN_SEND_DSCP_UP_MAP_TO_FW
  Release 5.2.03.20Z
  qcacld-3.0: Log vdev id and opmode while creating pesession
  Release 5.2.03.21
  qcacld-3.0: Add new config for BTM offload
  Release 5.2.03.21A
  qcacld-3.0: Use in WLAN_MAX_VDEVS hdd_indicate_management_frames
  Release 5.2.03.21B
  qcacld-3.0: Add pld API to get the audio timestamp
  qcacld-3.0: Remove wext handler on mon mode adapter deinit
  Release 5.2.03.21C
  qcacld-3.0: Validate assoc response IE len before copy
  Release 5.2.03.21D
  qcacld-3.0: Add FTM TIME SYNC component in target_if
  Release 5.2.03.21E
  qcacld-3.0: Change default value of idle_roam_rssi_delta to 3
  Release 5.2.03.21F
  qcacld-3.0: Support coex parameter set to fw although chainmask set failure
  Release 5.2.03.21G
  qcacld-3.0: Add INI parameter for packet capture mode support
  Release 5.2.03.21H
  qcacld-3.0: Optimize logs in TX assoc req and RX assoc rsp
  Release 5.2.03.21I
  qcacld-3.0: Enable FTM time sync feature
  Release 5.2.03.21J
  qcacld-3.0: Fix compilation errors
  Release 5.2.03.21K
  qcacld-3.0: Add function to handle the FTM time sync events from target
  Release 5.2.03.21L
  qcacld-3.0: Cleanup logs in HDD APF path
  Release 5.2.03.21M
  qcacld-3.0: Optimize PMO prints
  qcacld-3.0: Optimize LL Stats prints
  Release 5.2.03.21N
  qcacld-3.0: Optimize log in roam and connect path
  Release 5.2.03.21O
  qcacld-3.0: Fix DHCP indication to FW feature for broadcast exchange
  qcacld-3.0: Add param to configure channel avoidance indication from FW
  qcacld-3.0: Clean up logs in STATS path
  qcacld-3.0: Rearrage roam code in CSR layer
  qcacld-3.0: Add support to get roam scan channels from fw
  Release 5.2.03.21P
  qcacld-3.0: Create mon thread for packet capture
  qcacld-3.0: Resume/suspend of mon thread for packet capture
  Release 5.2.03.21Q
  qcacld-3.0: Update trace dump to nofl dump
  qcacld-3.0: Log optimization for beacon report
  Release 5.2.03.21R
  qcacld-3.0: Add INI support for FIPS handshake offload feature
  Release 5.2.03.21S
  qcacld-3.0: Move disconnect ie info to a structure
  qcacld-3.0: Forward disconnect IEs from deauth roam event to kernel
  qcacld-3.0: Fill correct reason code after deauth roaming failure
  qcacld-3.0: Extract disconnect reason code from notif_params
  qcacld-3.0: Fix logging for the AUTH and Assoc frames
  Release 5.2.03.21T
  qcacld-3.0: Add support for packet capture callbacks
  qcacld-3.0: Register network interface for pktcapture mode
  qcacld-3.0: Log optimization for NCHO
  qcacld-3.0: Register/deregister packet capture callbacks
  Release 5.2.03.21U
  qcacld-3.0: Optimize logs in STA disconnect path
  Release 5.2.03.21V
  qcacld-3.0: Optimize CSA logs for SAP and STA
  Release 5.2.03.21W
  qcacld-3.0: Add reason codes for internal disconnections
  qcacld-3.0: Log enhancement in ACS
  Release 5.2.03.21X
  qcacld-3.0: Avoid sending tdls peer assoc cmd after roam start
  Release 5.2.03.21Y
  qcacld-3.0: Use session id while get roam scan ch from fw
  Release 5.2.03.21Z
  qcacld-3.0: Send vdev param command to set pkt capture mode
  qcacld-3.0: Combine and print channel for ACS and roam channels
  Release 5.2.03.22
  qcacld-3.0: Log enhancement for policy mgr
  Release 5.2.03.22A
  qcacld-3.0: Reduce regulatory logging
  Release 5.2.03.22B
  qcacld-3.0: Update bit position of the supp mode in sta info
  Release 5.2.03.22C
  qcacld-3.0: Process Mgmt Tx and Rx frames for pktcapture mode
  qcacld-3.0: Add WMI EVENT handler for offloaded mgmt data
  qcacld-3.0: Register tx and rx ops for packet capture component
  Release 5.2.03.22D
  qcacld-3.0: Clear CONFIG_CLD_HL_SDIO_CORE
  Release 5.2.03.22E
  qcacld-3.0: Send last disconnect reason in sta_info to userspace
  qcacld-3.0: Send disconnected AP beacon IEs to userspace in sta_info
  qcacld-3.0: Send all assoc request IE to hostapd in SAP mode
  qcacld-3.0: Send assoc request IEs in STA_INFO in SAP mode
  qcacld-3.0: Send proper reason code for STA kickout disconnections
  Release 5.2.03.22F
  qcacld-3.0: Process Rx data packet for pkt capture mode
  qcacld-3.0: Process Tx data packet for pkt capture mode
  Release 5.2.03.22G
  qcacld-3.0: Add ini for FTM time sync component
  Release 5.2.03.22H
  qcacld-3.0: Add support to trigger FTM time sync feature
  Release 5.2.03.22I
  qcacld-3.0: Optimize logs after connect complete
  Release 5.2.03.22J
  qcacld-3.0: suspend scan before scheduler thread suspended
  Release 5.2.03.22K
  qcacld-3.0: Add check for STA disconnect in pe disconnect cb
  qcacld-3.0: enable SMMU S1 and METERING Features in IPA
  Release 5.2.03.22L
  qcacld-3.0: Store rrm session bssid
  qcacld-3.0: Race condition handling for roam during disconnect
  Release 5.2.03.22M
  qcacld-3.0: Add sysfs entry to display ftm time sync offset
  Release 5.2.03.22N
  qcacld-3.0: Remove unnecessary enter exit from PMO functions
  qcacld-3.0: Improve logging in driver
  Release 5.2.03.22O
  qcacld-3.0: map DSCP CS6(48) to UP AC_VO(7)
  Release 5.2.03.22P
  qcacld-3.0: Set MCC quota for STA+CLI
  qcacld-3.0: Remove validate_context check from wlan_resume
  qcacld-3.0: Add support to include ACK status and tx retry count
  Release 5.2.03.22Q
  qcacld-3.0: Clear ftm_time_sync offset on disconnect and add bssid in sysfs
  qcacld-3.0: Call the cnss utils API to get audio timestamp
  qcacld-3.0: Enable the ftm_time_sync feature based on kernel defconfig
  Release 5.2.03.22R
  qcacld-3.0: Fix OUT OF SYNC for Mgmt Tx Pkts on Virtual Mon Interface
  Release 5.2.03.22S
  qcacld-3.0: Record the channel number for pktcapture mode
  qcacld-3.0: Add vdev check for ARP/NS offload in NaN mode
  Release 5.2.03.22T
  qcacld-3.0: Log disconnect reason with info level
  Release 5.2.03.22U
  qcacld-3.0: Introduce ini for roam triggers including sta kickout trigger
  Release 5.2.03.22V
  qcacld-3.0: Refactor 11kv logging
  Release 5.2.03.22W
  qcacld-3.0: Update default value of dp_proto_event_bitmap
  Release 5.2.03.22X
  qcacld-3.0: Add ini support to skip full scan after bmiss
  Release 5.2.03.22Y
  qcacld-3.0: Check pmf status while processing mgmt packets
  Release 5.2.03.22Z
  qcacld-3.0: Record the channel number for pktcapture mode
  Release 5.2.03.23
  qcacld-3.0: Enable packet capture feature
  qcacld-3.0: Update roam count in LFR3 roaming
  Release 5.2.03.23A
  qcacld-3.0: Restore default RSO configs in driver only on disconnect
  Release 5.2.03.23B
  qcacld-3.0: Query sta stats on disconnect in case of SAP
  Release 5.2.03.23C
  qcacld-3.0: Print SSID info when beacon report request is received
  Release 5.2.03.23D
  qcacld-3.0: Fix passing invalid ipa iface
  qcacld-3.0: Introduce a new compile time flag and INI
  qcacld-3.0: Add support for sae roaming with single PMK
  qcacld-3.0: Update sae_single_pmk info in RSO start command
  qcacld-3.0: Update PMK info in RSO update command
  qcacld-3.0: Clear same pmk info while processing del/flush pmk
  Release 5.2.03.23E
  qcacld-3.0: disable SMMU S1 for few helium targets
  Release 5.2.03.23F
  qcacld-3.0: Update proper copyright years
  Release 5.2.03.23G
  qcacld-3.0: Disable all roam scan in case p2p connection is present
  Release 5.2.03.23H
  qcacld-3.0: Have enum to string conversion APIs under DEBUG define
  Release 5.2.03.23I
  qcacld-3.0: Handle illegal memory access during driver unload
  Release 5.2.03.23J
  qcacld-3.0: Fix monitor mode radiotap bw and rssi info
  Release 5.2.03.23K
  qcacld-3.0: Periodically print ARP and DNS stats after STA association
  Release 5.2.03.23L
  qcacld-3.0: Optimize PMO logs
  Release 5.2.03.23M
  qcacld-3.0: Add INI support for DFS Channel Ageout Time
  Release 5.2.03.23N
  qcacld-3.0: Disable LRO/GRO when NDI peer is created
  Release 5.2.03.23O
  qcacld-3.0: Fix compilation issue
  Release 5.2.03.23P
  qcacld-3.0: Check for vendor vht ie to fill assoc ind param
  Release 5.2.03.23Q
  qcacld-3.0: Log enhancement for PNO scan
  Release 5.2.03.23R
  qcacld-3.0: Add more info in connect prints
  Release 5.2.03.23S
  qcacld-3.0: Stop bus_bw timer as part of stop_adapter for NDI
  Release 5.2.03.23T
  qcacld-3.0: Revert dot11 parser changes for beacon report err
  Release 5.2.03.23U
  qcacld-3.0: Try association with the same BSS on receiving assoc reject
  Release 5.2.03.23V
  qcacld-3.0: Stop roam timer when receiving deauth roam event
  Release 5.2.03.23W
  qcacld-3.0: Update the occupied channel list after CSA
  qcacld-3.0: Increase roam failure reason buffer size
  Release 5.2.03.23X
  qcacld-3.0: Process pkt_capture APIs based on packet capture mode
  Release 5.2.03.23Y