Commit 9ecb5b34 authored Aug 03, 2016 by Linux Build Service Account

Promotion of kernel.lnx.4.4-160803.

CRs Change ID Subject
--------------------------------------------------------------------------------------------------------------
hwmon: (max1111) Return -ENODEV from max1111_read_channe
vfs: show_vfsstat: do not ignore errors from show_devnam
ALSA: usb-audio: add Microsoft HD-5001 to quirks
drm/radeon: add a dpm quirk for all R7 370 parts
crypto: ux500 - fix checks of error code returned by dev
PKCS#7: pkcs7_validate_trust(): initialize the _trusted
scsi: storvsc: fix SRB_STATUS_ABORTED handling
libnvdimm: fix smart data retrieval
ipv4: fix broadcast packets reception
987051 I0baf2be2d5a476e2e4267f20b99d0ddf5492469e qseecom: Change format specifier %p to %pK
staging: comedi: ni_mio_common: fix the ni_write[blw]()
ppp: release rtnl mutex when interface creation fails
USB: iowarrior: fix oops with malicious USB descriptors
drm/amdgpu/gmc: move vram type fetching into sw_init
ppp: take reference on channels netns
PM / OPP: Parse 'opp-<prop>-<name>' bindings
crypto: ccp - Add hash state import and export support
mld, igmp: Fix reserved tailroom calculation
ipv4: initialize flowi4_flags before calling fib_lookup(
1044129 I972def91c47af5e1d2406c470a40bf6c2f3fbde9 iio: adc: rradc: Append sysfs channel string
1027136 Ia1a72138967a3806253f8431b36af71eaabe816d msm: misc: hdcp: add hdcp support for display port
of: alloc anywhere from memblock if range not specified
pinctrl: sh-pfc: only use dummy states for non-DT platfo
sched/cputime: Fix steal time accounting vs. CPU hotplug
parisc: Avoid function pointers for kernel exception rou
ip6_tunnel: set rtnl_link_ops before calling register_ne
HID: fix hid_ignore_special_drivers module parameter
net: validate variable length ll headers
dm: fix excessive dm-mq context switching
md/raid5: preserve STRIPE_PREREAD_ACTIVE in break_stripe
PM / OPP: Manage device clk
arm64: opcodes.h: Add arm big-endian config options befo
PM / OPP: Disable OPPs that aren't supported by the regu
Bluetooth: Add new AR3012 ID 0489:e095
1042302 I9ed40ccedab71a3800b97fc7825741855bceaa29 input: touchscreen: add protocol B support for ITE tech
PM / OPP: Rename structures for clarity
tpm_eventlog.c: fix binary_bios_measurements
usb: renesas_usbhs: fix to avoid using a disabled ep in
writeback, cgroup: fix premature wb_put() in locked_inod
cpufreq: dt: No need to allocate resources anymore
xtensa: clear all DBREAKC registers on start
1044326 Iaa2c9e45fe0ed0392e084a381d2d1e1d506bc609 msm: mdss: hdmi: send info frame for HDR video streams
bridge: allow zero ageing time
PM / OPP: Fix NULL pointer dereference crash when disabl
mtip32xx: Cleanup queued requests after surprise removal
md/raid5: Compare apples to apples (or sectors to sector
1049012 I059e1b111c607e49a7cc9a7940cf458e701c73d3 wcd_dsp_mgr: Add the WCD DSP manager driver
ALSA: hda - Fix white noise on Asus N750JV headphone
USB: digi_acceleport: do sanity checking for the number
ipv4: Don't do expensive useless work during inetdev des
tools/hv: Use include/uapi with __EXPORTED_HEADERS__
clk: rockchip: add hclk_cpubus to the list of rk3188 cri
USB: serial: cp210x: Adding GE Healthcare Device ID
sh_eth: fix NULL pointer dereference in sh_eth_ring_form
net: mvneta: enable change MAC address when interface is
perf tools: Dont stop PMU parsing on alias parse error
1045208 I34365ce21659348ad1d1289e3b06b81e778c2648 input: msg21xx_ts: Move the driver to proper path
PM / OPP: Fix incorrect comments
1044129 Iec4aa730fa97133af0c0fb9d47557738ef6f45a0 iio: adc: rradc: Update die_temp and chg_temp scaling
1048435 I5ece4a5676cf1d2fae4a5276da5833272cd95ecb msm: ipa3: update IPA BCR register values
Bluetooth: Fix potential buffer overflow with Add Advert
mmc: sh_mmcif: rework dma channel handling
kbuild/mkspec: fix grub2 installkernel issue
RAID5: revert e9e4c377 to fix a livelock
ocfs2/dlm: fix race between convert and recovery
1041436 Iffbb50993b1ec04eebe925bf5da48192688ca62e ARM: dts: msm: add 2k truly panel for qrd in msmcobalt
crypto: marvell/cesa - forward devm_ioremap_resource() e
EDAC/sb_edac: Fix computation of channel address
raid1: include bio_end_io_list in nr_queued to prevent f
ALSA: hda - Fix unconditional GPIO toggle via automute
ALSA: usb-audio: Add sanity checks for endpoint accesses
PM / OPP: Remove 'operating-points-names' binding
rbd: use GFP_NOIO consistently for request allocations
1042302 I314677747e8bbbcb273cd898376bbe03197c8c25 input: it7258_ts_i2c: add low reset and reset delay supp
bcache: fix race of writeback thread starting before com
1047860 Ic3140ee333e646352f7ede3ecf969b7f078ff2c9 defconfig: Enable REMOTEQDSS
tpm_crb: tpm2_shutdown() must be called before tpm_chip_
HID: multitouch: force retrieving of Win8 signature blob
x86/microcode/intel: Make early loader look for builtin
fuse: Add reference counting for fuse_io_priv
splice: handle zero nr_pages in splice_to_pipe()
1045392 Icd637fcd264565b06bcb90f8e6f7b26c8d112f24 thermal: tsens: Update TSENS property for reading efuse
qlcnic: Fix mailbox completion handling during spurious
USB: serial: ftdi_sio: Add support for ICP DAS I-756xU d
sd: Fix excessive capacity printing on devices with bloc
ipr: Fix regression when loading firmware
nfs: use file_dentry()
ocfs2/dlm: fix BUG in dlm_move_lockres_to_recovery_list
Revert "PCI: Add helpers to manage pci_dev->irq and pci_
btrfs: fix crash/invalid memory access on fsync when usi
KVM: x86: fix missed hardware breakpoints
coda: fix first encoded frame payload
scripts/coccinelle: modernize &
cdc-acm: fix NULL pointer reference
mac80211: properly deal with station hashtable insert er
KVM: VMX: avoid guest hang on invalid invvpid instructio
fuse: do not use iocb after it may have been freed
ALSA: hda - fix front mic problem for a HP desktop
cgroup: ignore css_sets associated with dead cgroups dur
x86/microcode: Untangle from BLK_DEV_INITRD
drm/amdgpu/gmc: use proper register for vram type on Fij
ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM
macvtap: always pass ethernet header in linear
ipv4: only create late gso-skb if skb is already set up
ext4: ignore quota mount options if the quota feature is
Revert "usb: hub: do not clear BOS field during reset de
1049012 I2b1464c2a035a039440e6d3e5122ad3f90da4d1e ASoC: wcd-dsp-utils: Add utilities for wcd dsp
USB: cdc-acm: more sanity checking
x86/iopl/64: Properly context-switch IOPL on Xen PV
1028339 I41e9012210ce9a5f4fbeb4236365c0fa2db08625 ARM: dts: msm: Modify the GPIO bias for I2C_5 on msmcoba
1009727 I34989768811b23762c4afe3e33e229ffa3f1db17 serial: msm_serial_hs: Move clk count voting out of runt
cpufreq: dt: Reuse dev_pm_opp_get_max_transition_latency
sg: fix dxferp in from_to case
tracing: Fix crash from reading trace_pipe with sendfile
ALSA: timer: Use mod_timer() for rearming the system tim
mmc: sdhci: fix data timeout (part 2)
mtip32xx: Handle FTL rebuild failure state during device
quota: Fix possible GPF due to uninitialised pointers
usb: retry reset if a device times out
staging: android: ion: Set the length of the DMA sg entr
net: qca_spi: clear IFF_TX_SKB_SHARING
ACPI / PM: Runtime resume devices when waking from hiber
cpufreq-dt: fix handling regulator_get_voltage() result
ALSA: usb-audio: Fix double-free in error paths after sn
PM / OPP: Introduce dev_pm_opp_get_max_volt_latency()
perf/core: Fix perf_sched_count derailment
Revert "PCI, x86: Implement pcibios_alloc_irq() and pcib
mmc: sdhci: fix data timeout (part 1)
mtip32xx: Fix broken service thread handling
be2iscsi: set the boot_kset pointer to NULL in case of f
pinctrl: sunxi: Fix A33 external interrupts not working
compiler-gcc: disable -ftracer for __noclone functions
1041436 I23d9ebc6ae2f4070984ee0d5b7e6fbe40f6872dd ARM: dts: msm: add 4k dsc panel for qrd in msmcobalt
mmc: mmc_spi: Add Card Detect comments and fix CD GPIO c
HID: logitech: fix Dual Action gamepad support
fs: add file_dentry()
mmc: block: fix ABI regression of mmc_blk_ioctl
clk: rockchip: rk3368: fix parents of video encoder/deco
Input: ims-pcu - sanity check against missing interfaces
USB: uas: Reduce can_queue to MAX_CMNDS
parisc: Unbreak handling exceptions from kernel modules
ASoC: samsung: pass DMA channels as pointers
mac80211: avoid excessive stack usage in sta_info
ALSA: pcm: Avoid "BUG:" string for warnings again
bonding: fix bond_get_stats()
net: bcmgenet: fix dma api length mismatch
ext4: add lockdep annotations for i_data_sem
drm/radeon: add another R7 370 quirk
net: vrf: Remove direct access to skb->data
parisc: Fix kernel crash with reversed copy_from_user()
v4l: vsp1: Set the SRU CTRL0 register when starting the
xtensa: ISS: don't hang if stdin EOF is reached
MIPS: Fix MSA ld unaligned failure cases
staging: comedi: ni_tiocmd: change mistaken use of start
ALSA: usb-audio: Minor code cleanup in create_fixed_stre
mac80211: fix unnecessary frame drops in mesh fwding
mei: bus: check if the device is enabled before data tra
usb: renesas_usbhs: disable TX IRQ before starting TX DM
PM / OPP: Add {opp-microvolt|opp-microamp}-<name> bindin
1044129 I46dca1f606b5414bf7a032c18c9684ba2e53cf28 iio: adc: rradc: Add RRADC channels
perf tools: Fix python extension build
dm: fix rq_end_stats() NULL pointer in dm_requeue_origin
mm/page_alloc: prevent merging between isolated and othe
sched/preempt, sh: kmap_coherent relies on disabled pree
ia64: define ioremap_uc()
usbnet: cleanup after bind() in probe()
RAID5: check_reshape() shouldn't call mddev_suspend
USB: usb_driver_claim_interface: add sanity checking
crypto: atmel - fix checks of error code returned by dev
rocker: set FDB cleanup timer according to lowest ageing
pwc: Add USB id for Philips Spc880nc webcam
mtip32xx: Handle safe removal during IO
iio: st_magn: always define ST_MAGN_TRIGGER_SET_STATE
md: multipath: don't hardcopy bio in .make_request path
PM / OPP: Rename OPP nodes as opp@<opp-hz>
tracing: Fix trace_printk() to print when not using bpri
1042302 Ib9905017fc18999e7ab7c9cb8bc1af398f5f9791 input: it7258_ts_i2c: Do not put driver in infinite loop
tcp/dccp: remove obsolete WARN_ON() in icmp handlers
cpufreq: dt: OPP layers handles clock-latency for V1 bin
PM / OPP: Add dev_pm_opp_set_rate()
mlxsw: spectrum: Check requested ageing time is valid
PM / OPP: Add "opp-supported-hw" binding
1042302 Ib666f406442ad5f323a08e4624832fba5e2546e2 input: it7258_ts_i2c: add regulator framework support
cpufreq: dt: Pass regulator name to the OPP core
vxlan: fix missing options_len update on RX with collect
mm: memcontrol: reclaim when shrinking memory.high below
perf/x86/intel: Add definition for PT PMI bit
1044489 I3ab9858daf6dcdbce762946cbdebeb96eaad764a ASoC: msmcobalt: fix proxy channels index value
KVM: i8254: change PIT discard tick policy
adv7511: TX_EDID_PRESENT is still 1 after a disconnect
sched/cputime: Fix steal_account_process_tick() to alway
bttv: Width must be a multiple of 16 when capturing plan
KVM: fix spin_lock_init order on x86
pcmcia: db1xxx_ss: fix last irq_to_gpio user
1049012 If1162c09de8d4d7c330a97a1f133f6d46ce2fd74 mfd: wcd934x: Add page 0x50 registers for wcd934x codec
tcp: fix tcpi_segs_in after connection establishment
1047798 I52095462c60d1320e3aeabed7aaf7462f143f8da ARM: dts: msm: Add platform info for msmcobalt
perf/x86/intel: Fix PEBS warning by only restoring activ
1049012 I0640ac1ed60a2ec3633636760593211ecd2f9c2d ASoC: wcd-spi: SPI driver for WCD audio codecs
tunnel: Clear IPCB(skb)->opt before dst_link_failure cal
bcache: cleaned up error handling around register_cache(
raid10: include bio_end_io_list in nr_queued to prevent
ALSA: hda - fix the mic mute button and led problem for
mpls: find_outdev: check for err ptr in addition to NULL
1042302 I63720092f445700b7ae66e10950d87a4654060aa input: it7258_ts_i2c: add force fw and cfg update functi
ath9k: fix buffer overrun for ar9287
powerpc/mm: Fixup preempt underflow with huge pages
arm64: vdso: Mark vDSO code as read-only
rapidio/rionet: fix deadlock on SMP
ALSA: usb-audio: Fix NULL dereference in create_fixed_st
KVM: VMX: fix nested vpid for old KVM guests
perf/x86/pebs: Add workaround for broken OVFL status on
PM / OPP: Fix parsing of opp-microvolt and opp-microamp
mac80211: fix txq queue related crashes
mlx4: add missing braces in verify_qp_parameters
PM / OPP: get/put regulators from OPP core
dm snapshot: disallow the COW and origin devices from be
ARM: dts: at91: sama5d4 Xplained: don't disable hsmci re
HID: wacom: fix Bamboo ONE oops
rtnl: fix msg size calculation in if_nlmsg_size()
1046577 Ia2d375b4c9d53dc4eedaf4983dd0bd1433419d75 ARM: dts: msm: Update frequency to MEM ACC level mapping
PM / OPP: Add missing doc comments
USB: uas: Add a new NO_REPORT_LUNS quirk
farsync: fix off-by-one bug in fst_add_one
dm cache: make sure every metadata function checks fail_
regulator: core: Fix nested locking of supplies
PM / OPP: Use snprintf() instead of sprintf()
drm/radeon: add a dpm quirk for sapphire Dual-X R7 370 2
mmc: sdhci-pci: Add support and PCI IDs for more Broxton
clk: bcm2835: Fix setting of PLL divider clock rates
udp6: fix UDP/IPv6 encap resubmit path
perf: Do not double free
ALSA: hda - Apply fix for white noise on Asus N550JV, to
drm/radeon: disable runtime pm on PX laptops without dGP
tty: Fix GPF in flush_to_ldisc(), part 2
1042841 I88de436b29c3000dcebeec4da607dff42d0609fe msm: ipa: add support for configuring polling interval/s
1042302 Ie3ee6b861c10ae901dea54f252f6a799d688f02a input: touchscreen: Change touch driver suspend code flo
crypto: ccp - memset request context to zero during impo
ipr: Fix out-of-bounds null overwrite
USB: uas: Limit qdepth at the scsi-host level
tcp: convert cached rtt from usec to jiffies when feedin
1044301 Id968f2541e1a543d3d7cf1c96af9936c9ae564ea msm: mdss: hdmi: use pinctrl API to toggle 5v on msmcoba
crypto: keywrap - memzero the correct memory
IB/srpt: Simplify srpt_handle_tsk_mgmt()
x86/mm: TLB_REMOTE_SEND_IPI should count pages
cpufreq-dt: Supply power coefficient when registering co
cpufreq: dt: Unsupported OPPs are already disabled
1041436 I13034d549833d68941f84fb9639946ecbe7e6107 ARM: dts: msm: set 2k truly panel as default for qrd pla
writeback, cgroup: fix use of the wrong bdi_writeback wh
1044129 I4da81a576b88285cedb0a1c7fd49ccd526d25012 ARM: dts: msm: Remove RRADC channel nodes on pmicobalt
878479 I49230fb6532ee02f122d5f16dfad8dbd978b368e input: it7258_ts_i2c: replace unused variable in driver
1028339 I50d918197a4cd0b503dff78e7d4ba89518c1d1c2 ARM: dts: msm: Modify the GPIO bias for UART_3 on msmcob
iwlwifi: mvm: Fix paging memory leak
1045396 If2408bc4678b2e0f7e2366329be005cd652661cf spmi: pmic-arb: correct support for up to 512 APIDs
KVM: x86: reduce default value of halt_poll_ns parameter
1048299 I9cba8e370c753ac5aa33252fce0ea446f061b4c0 power_supply: add CHARGER_TEMP and CHARGER_TEMP_MAX prop
drm/radeon: Don't drop DP 2.7 Ghz link setup on some car
jbd2: fix FS corruption possibility in jbd2_journal_dest
mtip32xx: Avoid issuing standby immediate cmd during FTL
s390: fix floating pointer register corruption (again)
tpm: fix the rollback in tpm_chip_register()
1042302 I261db5723a19a7084072487527b350d155a54e78 input: it7258_ts_i2c: add gpio configuration support
ALSA: hda - Don't handle ELD notify from invalid port
drm/amdgpu: disable runtime pm on PX laptops without dGP
intel_idle: prevent SKL-H boot failure when C8+C9+C10 en
1045163 Idf191144354426233eca41727a41e26ddbf92f95 input: touchpanel: Move Goodix GT915 driver to drivers f
aacraid: Fix memory leak in aac_fib_map_free
drm/amdgpu: include the right version of gmc header file
iser-target: Rework connection termination
ALSA: usb-audio: Add a sample rate quirk for Phoenix Aud
1048706 Iedccc4ab908e1b076efdd4506b686c826eacb73a msm: ipa: fix multiple static analysis issues
aacraid: Fix RRQ overload
ppp: ensure file->private_data can't be overridden
packet: validate variable length ll headers
1042302 Ia81bb3da7e0b880de6f2ed95d346b533104ed3fc input: touchscreen: clean ITE tech driver probe function
mm: fix invalid node in alloc_migrate_target()
1042302 I8912545589cb763c1deb70bebb081e920af69ad2 input: touchscreen: add auto fw upgrade for ITE tech dri
brd: Fix discard request processing
usbvision: fix crash on detecting device with invalid co
1044422 I81d2e3b67bf55460f40406328c5ad8c40851033a qcom-charger: add support for WiPower
1045392 Id6893729f5b37a862f3621b8c7897eb767490cd7 ARM: dts: msm: Remove TSENS QFPROM address and slope dat
scripts/kconfig: allow building with make 3.80 again
Bluetooth: btusb: Add a new AR3012 ID 13d3:3472
Input: synaptics - handle spurious release of trackstick
cpufreq: dt: Convert few pr_debug/err() calls to dev_dbg
1018104 I464c785eba28f02993042d220e5744025e2f9346 ASoC: wcd9335: don't check for HPHL and HPHR for mono he
ipv4: l2tp: fix a potential issue in l2tp_ip_recv
1017648 I8dee2f8aa0a6882ec1c320669f165e7cb94bb5f1 serial: msm_serial_hs: Modify IPC Logging
Btrfs: fix file/data loss caused by fsync after rename a
arm64: replace read_lock to rcu lock in call_step_hook
s390/pci: enforce fmb page boundary rule
1024876 I9819c4b95876f697e75b1b84810b6c520d9c33ec CHROMIUM: android: binder: Fix potential scheduling-whil
clk: rockchip: rk3368: fix cpuclk mux bit of big cpu-clu
watchdog: rc32434_wdt: fix ioctl error handling
scsi_common: do not clobber fixed sense information
x86/irq: Cure live lock in fixup_irqs()
libnvdimm, pfn: fix uuid validation
1044710 I9d3c5eec717da0b072144a1027e4582e73aaa6d9 msm: ipa: fix IPA driver processing context delete logic
cpufreq: dt: Rename 'need_update' to 'opp_v1'
staging: android: ion_test: fix check of platform_device
iser-target: Add new state ISER_CONN_BOUND to isert_conn
iser-target: Fix identification of login rx descriptor t
ax25: add link layer header validation function
PM / OPP: Initialize regulator pointer to an error value
1037822 Ic1edcb3548eae152fc01de88859bcf311f48f847 msm: ipa: update wan rx size buffer
pinctrl: freescale: imx: fix bogus check of of_iomap() r
8250: use callbacks to access UART_DLL/UART_DLM
sctp: lack the check for ports in sctp_v6_cmp_addr
KVM: VMX: avoid guest hang on invalid invept instruction
1044129 I56e6bff28be2cc23f00622d5c37e42564c51a72f iio: adc: rradc: Update RRADC reads and scaling
PM / OPP: Set cpu_dev->id in cpumask first
perf/x86/intel: Fix PEBS data source interpretation on N
au0828: fix au0828_v4l2_close() dev_state race condition
au0828: Fix dev_state handling
1022917 I68200b12fcb316bf36f7c3af2734a094f972da9c ASoC: wcd9335: Changes to support CPE session using EC P
qmi_wwan: add "D-Link DWM-221 B1" device id
xfrm: Fix crash observed during device unregistration an
Linux 4.4.7
usb: hub: fix a typo in hub_port_init() leading to wrong
pinctrl-bcm2835: Fix cut-and-paste error in "pull" parsi
qmi_wwan: add Sierra Wireless EM74xx device ID
tun, bpf: fix suspicious RCU usage in tun_{attach, detac
bcache: fix cache_set_flush() NULL pointer dereference o
cdc_ncm: toggle altsetting to force reset before setup
ipv6: l2tp: fix a potential issue in l2tp_ip6_recv
target: Fix target_release_cmd_kref shutdown comp leak
1038623 I917f025678e6abb03058d5be4ec42d9e6d76835f msm: ipa: disconnect sequence change for USB 2.0
Linux 4.4.8
aic7xxx: Fix queue depth handling
xtensa: fix preemption in {clear,copy}_user_highpage
1039008 I6fc333e15c5f0410c6b560b2a7005a1752f5f936 qcom-charger: qpnp-smb2: End charge cycle while battery
ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkil
mtd: onenand: fix deadlock in onenand_block_markbad
cpufreq: dt: No need to fetch voltage-tolerance
s390/cpumf: Fix lpp detection
drm/udl: Use unlocked gem unreferencing
mm: memcontrol: reclaim and OOM kill when shrinking memo
xen/events: Mask a moving irq
1047266 I380efdf90305a65d4cde46dfe44762ac11c87678 usb: gadget: f_cdev: Fix NULL ptr dereference in usb_cse
mmc: sh_mmcif: Correct TX DMA channel allocation
fs/coredump: prevent fsuid=0 dumps into user-controlled
net: jme: fix suspend/resume on JMC260
Bluetooth: btusb: Add new AR3012 ID 13d3:3395
x86/entry/compat: Keep TS_COMPAT set during signal deliv
PM / OPP: Introduce dev_pm_opp_get_max_transition_latenc
1048941 I5ddb2036ab3df4715382368c144365d578ce4bb8 irq-chip: gic-v3: remove print message in irq driver
1042302 I8f193ee10076b6cf058b0a6940db54f71f70b758 input: touchscreen: correct probe error path for ITE tec
mmc: sdhci: Fix override of timeout clk wrt max_busy_tim
net: Fix use after free in the recvmmsg exit path
1042302 I3bbea110af189f236bb175670210e086e15d5d2d input: it7258_ts_i2c: add pinctrl support
ALSA: hda - Fix headset support and noise on HP EliteBoo
nfsd4: fix bad bounds checking
ALSA: hda - Fixup speaker pass-through control for nid 0
Input: powermate - fix oops with malicious USB descripto
HID: i2c-hid: fix OOB write in i2c_hid_set_or_send_repor
iio: accel: bmc150: fix endianness when reading axes
USB: option: add "D-Link DWM-221 B1" device id
1047605 I593d288edb704d2a92a65d47ca7f6399ba2e080d ARM: dts: msm: Update the graphics OPP property on MSMCO
s390/cpumf: add missing lpp magic initialization
clk: rockchip: rk3368: fix cpuclk core dividers
HID: usbhid: fix inconsistent reset/resume/reset-resume
iommu: Don't overwrite domain pointer when there is no d
iio: gyro: bmg160: fix buffer read values
sd: Fix discard granularity when LBPRZ=1
bitops: Do not default to __clear_bit() for __clear_bit_
MAINTAINERS: Update mailing list and web page for hwmon
iio: gyro: bmg160: fix endianness when reading axes
net: irda: Fix use-after-free in irtty_open()
ipv6: Count in extension headers in skb->network_header
Revert "x86/PCI: Don't alloc pcibios-irq when MSI is ena
PM / OPP: Initialize u_volt_min/max to a valid value
X.509: Fix leap year handling again
crypto: ccp - Limit the amount of information exported
1049012 I1cedf646d0df1ab5968df4830502649de305c9d1 mfd: wcd934x: Mark CPE registers as volatile
tpm: fix the cleanup of struct tpm_chip
1042302 I02bcea18e93146b68aaeb8d81fa7bec67b5bcc73 input: touchscreen: clean ITE tech TS driver
ARC: bitops: Remove non relevant comments
1049491 I4236f4b6272d0bccaf8a2d6f7d5435caf044bd59 Revert "Thermal: handle thermal zone device properly dur
PCI: ACPI: IA64: fix IO port generic range check
x86/apic: Fix suspicious RCU usage in smp_trace_call_fun
perf/x86/intel: Use PAGE_SIZE for PEBS buffer size on Co
bridge: Allow set bridge ageing time when switchdev disa
1024876 I781dc34fdf52823fd34f4bb93872f85847076c66 sched,preempt: Fix preempt_count manipulations
Thermal: Ignore invalid trip points
tuntap: restore default qdisc
PCI: Disable IO/MEM decoding for devices with non-compli
mtip32xx: Print exact time when an internal command is i
EDAC, amd64_edac: Shift wrapping issue in f1x_get_norm_d
crypto: ccp - Don't assume export/import areas are align
nfsd: fix deadlock secinfo+readdir compound
PM / OPP: Add debugfs support
pinctrl: nomadik: fix pull debug print inversion
net: qca_spi: Don't clear IFF_BROADCAST
regulator: core: avoid unused variable warning
x86/PCI: Mark Broadwell-EP Home Agent & PCU as having no
ipv6: re-enable fragment header matching in ipv6_find_hd
qlcnic: Remove unnecessary usage of atomic_t
tipc: Revert "tipc: use existing sk_write_queue for outg
mtip32xx: Fix for rmmod crash when drive is in FTL rebui
bpf: avoid copying junk bytes in bpf_get_current_comm()
dm thin metadata: don't issue prefetches if a transactio
1042302 I4b6b9867dc0d74c02d165aae670213544fcda1bc input: it7258_ts_i2c: add dt parsing support
1042302 Ia989d8130bbded4ae5acab0b9c3122998acb2056 input: it7258_ts_i2c: add low power mode support in susp
PM / OPP: Parse 'opp-supported-hw' binding
pinctrl: pistachio: fix mfio84-89 function description a
cpufreq: dt: Use dev_pm_opp_set_rate() to switch frequen
Bluetooth: btusb: Add a new AR3012 ID 04ca:3014
ALSA: usb-audio: Skip volume controls triggers hangup on
media: v4l2-compat-ioctl32: fix missing length copy in p
1039005 Ieee8276f000c2eb43951e64eee8f07295a351558 ARM: dts: msm: vote IPA_cfg on msmcobalt
ALSA: hda - Asus N750JV external subwoofer fixup
USB: cypress_m8: add endpoint sanity check
perf tools: Fix checking asprintf return value
perf: Cure event->pending_disable race
ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates
1037824 I01434ce0b58b5162c8e7aec1d43a7c66a7eaac44 msm: ipa: Fix the memory leak on exception
IB/ipoib: fix for rare multicast join race condition
net: fix bridge multicast packet checksum validation
qlge: Fix receive packets drop.
iser-target: Separate flows for np listeners and connect
mtip32xx: Remove unwanted code from taskfile error handl
mtip32xx: Implement timeout handler
libnvdimm: Fix security issue with DSM IOCTL.
ALSA: hda/realtek - Enable the ALC292 dock fixup on the
ARC: [BE] readl()/writel() to work in Big Endian CPU con
usb: renesas_usbhs: avoid NULL pointer derefernce in usb
1041206 I4f72857557222cbd719da7bd177511951ef7f1ff smb-lib: Add support for thermal daemon throttling fcc
clk: rockchip: rk3368: fix hdmi_cec gate-register
x86/iopl: Fix iopl capability check on Xen PV
ALSA: usb-audio: Add a quirk for Plantronics BT300
KVM: x86: Inject pending interrupt even if pending nmi e
1013201 Ie6ec7211c64f3c4f53b9f590e5bcf5fa1937d594 soc: qcom: irq_helper: Add irq helper module
PM / sleep: Clear pm_suspend_global_flags upon hibernate
ARM: dts: at91: sama5d3 Xplained: don't disable hsmci re
tracing: Have preempt(irqs)off trace preempt disabled fu
PM / OPP: Parse clock-latency and voltage-tolerance for
1047772 I17817fbf6692829959314923c514b377e612aff8 soc: qcom: socinfo: Add support for APQCOBALT
ALSA: hda - Apply reboot D3 fix for CX20724 codec, too
drm/dp: move hw_mutex up the call stack
1024876 I90fe02cdedb8a5677b900a68528fb443b9204322 android: binder: Disable preemption while holding the gl
sh_eth: advance 'rxdesc' later in sh_eth_ring_format()
watchdog: don't run proc_watchdog_update if new value is
USB: mct_u232: add sanity checking in probe
1009727 I0e5d6b8a8a69efc2d9c65dc1edc85f13cbc94fc3 msm_serial_hs: Change resource voting and system suspend
saa7134: Fix bytesperline not being set correctly for pl
aacraid: Set correct msix count for EEH recovery
Input: ati_remote2 - fix crashes on detecting device wit
cpufreq: cpufreq-dt: avoid uninitialized variable warnin
xfs: fix two memory leaks in xfs_attr_list.c error paths
coda: fix error path in case of missing pdata on non-DT
mac80211: fix ibss scan parameters
virtio: virtio 1.0 cs04 spec compliance for reset

Change-Id: I03b236b9820f429c9f15c27f50b2a0017f074b9b
CRs-Fixed: 1009727, 1044326, 987051, 1022917, 1047798, 1044301, 1044129, 1041436, 1037824, 1045208, 1038623, 1041206, 1047772, 1042841, 1047266, 1044489, 1048435, 1039005, 1028339, 1017648, 1018104, 1047860, 1048941, 878479, 1039008, 1037822, 1042302, 1044422, 1024876, 1013201, 1027136, 1045396, 1047605, 1045392, 1049012, 1048706, 1045163, 1046577, 1048299, 1044710, 1049491

parents da92b44b 059df41e

Documentation/devicetree/bindings/iio/adc/qcom-rradc.txt

+4 −12

Original line number	Diff line number	Diff line
		@@ -36,13 +36,10 @@ Main node properties:
		Definition: Must be one. For details about IIO bindings see:
		Documentation/devicetree/bindings/iio/iio-bindings.txt

		Channel subnode properties:

		- channel:
		Usage: required
		Value type: <u32>
		Definition: ADC channel number.
		See drivers/iio/adc/qcom-rradc.c for channels within rradc_channel_id
		IIO client nodes need to specify the RRADC channel number while requesting ADC reads.
		The channel list supported by the RRADC driver is available in the enum rradc_channel_id
		located at at drivers/iio/adc/qcom-rradc.c. Clients can use this index from the enum
		as the channel number while requesting ADC reads.

		Example:

		@@ -53,11 +50,6 @@ Example:
		#address-cells = <1>;
		#size-cells = <0>;
		#io-channel-cells = <1>;

		/* Channel node */
		batt_id {
		channel = <0>;
		};
		};

		/* IIO client node */

Documentation/devicetree/bindings/input/touchscreen/it7258_ts_i2c.txt

+33 −0

Original line number	Diff line number	Diff line
		@@ -17,6 +17,7 @@ Required properties:
		same as "interrupts" node. It will also
		contain active low or active high information.
		- ite,reset-gpio : reset gpio to control the reset of chip
		- ite,reset-delay : reset delay for controller (ms), default 20

		Optional properties:
		- avdd-supply : Analog power supply needed to power device
		@@ -24,6 +25,26 @@ Optional properties:
		- ite,wakeup : boolean, use this to support touch-to-wake feature.
		- ite,palm-detect-en : boolean, use this to send palm-detect-keycode when
		palm is detected.
		- ite,fw-name : Specify firmware file name in /etc/firmware
		- ite,cfg-name : Specify config file name in /etc/firmware
		- ite,panel-coords : touch panel min x, min y, max x and
		max y resolution
		- ite,display-coords : display min x, min y, max x and
		max y resolution
		- ite,num-fingers : number of fingers supported by the touch controller
		- pinctrl-names : This should be defined if a target uses pinctrl framework.
		See "pinctrl" in Documentation/devicetree/bindings/pinctrl/msm-pinctrl.txt.
		It should specify the names of the configs that pinctrl can install in driver.
		Following are the pinctrl configs that can be installed:
		"pmx_ts_active" : Active configuration of pins, this should specify active
		config defined in pin groups of interrupt and reset gpio.
		"pmx_ts_suspend" : Disabled configuration of pins, this should specify sleep
		config defined in pin groups of interrupt and reset gpio.
		"pmx_ts_release" : Release configuration of pins, this should specify
		release config defined in pin groups of interrupt and reset gpio.
		- ite,low-reset : boolean, if the controller needs low-state of the reset gpio while
		initializing, and reset gpio should be made as high-state to reset the
		controller. It means the controller needs "active-high" reset gpio.

		Required properties palm-detect-en feature:
		- ite,palm-detect-keycode : The keycode that is required to be sent when
		@@ -35,6 +56,11 @@ Example:
		compatible = "ite,it7260_ts";
		reg = <0x46>;
		interrupt-parent = <&msmgpio>;
		/* pins used by touchscreen */
		pinctrl-names = "pmx_ts_active","pmx_ts_suspend","pmx_ts_release";
		pinctrl-0 = <&ts_int_active &ts_reset_active>;
		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
		pinctrl-2 = <&ts_release>
		interrupts = <17 0x2>;
		avdd-supply = <&pm8226_l19>;
		vdd-supply = <&pm8226_lvs1>;
		@@ -43,5 +69,12 @@ Example:
		ite,wakeup;
		ite,palm-detect-en;
		ite,palm-detect-keycode = <142>;
		ite,fw-name = "ite7260_fw.bin";
		ite,cfg-name = "ite7260_cfg.bin";
		ite,panel-coords = <0 0 320 320>;
		ite,display-coords = <0 0 320 320>;
		ite,num-fingers = <2>;
		ite,reset-delay = <20>;
		ite,low-reset;
		};
		};

Documentation/devicetree/bindings/opp/opp.txt

+93 −39

Original line number	Diff line number	Diff line
		@@ -45,21 +45,10 @@ Devices supporting OPPs must set their "operating-points-v2" property with
		phandle to a OPP table in their DT node. The OPP core will use this phandle to
		find the operating points for the device.

		Devices may want to choose OPP tables at runtime and so can provide a list of
		phandles here. But only one of them should be chosen at runtime. This must be
		accompanied by a corresponding "operating-points-names" property, to uniquely
		identify the OPP tables.

		If required, this can be extended for SoC vendor specfic bindings. Such bindings
		should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
		and should have a compatible description like: "operating-points-v2-<vendor>".

		Optional properties:
		- operating-points-names: Names of OPP tables (required if multiple OPP
		tables are present), to uniquely identify them. The same list must be present
		for all the CPUs which are sharing clock/voltage rails and hence the OPP
		tables.

		* OPP Table Node

		This describes the OPPs belonging to a device. This node can have following
		@@ -100,6 +89,14 @@ Optional properties:
		Entries for multiple regulators must be present in the same order as
		regulators are specified in device's DT node.

		- opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to
		the above opp-microvolt property, but allows multiple voltage ranges to be
		provided for the same OPP. At runtime, the platform can pick a <name> and
		matching opp-microvolt-<name> property will be enabled for all OPPs. If the
		platform doesn't pick a specific <name> or the <name> doesn't match with any
		opp-microvolt-<name> properties, then opp-microvolt property shall be used, if
		present.

		- opp-microamp: The maximum current drawn by the device in microamperes
		considering system specific parameters (such as transients, process, aging,
		maximum operating temperature range etc.) as necessary. This may be used to
		@@ -112,6 +109,9 @@ Optional properties:
		for few regulators, then this should be marked as zero for them. If it isn't
		required for any regulator, then this property need not be present.

		- opp-microamp-<name>: Named opp-microamp property. Similar to
		opp-microvolt-<name> property, but for microamp instead.

		- clock-latency-ns: Specifies the maximum possible transition latency (in
		nanoseconds) for switching to this OPP from any other OPP.

		@@ -123,6 +123,26 @@ Optional properties:
		- opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in
		the table should have this.

		- opp-supported-hw: This enables us to select only a subset of OPPs from the
		larger OPP table, based on what version of the hardware we are running on. We
		still can't have multiple nodes with the same opp-hz value in OPP table.

		It's an user defined array containing a hierarchy of hardware version numbers,
		supported by the OPP. For example: a platform with hierarchy of three levels
		of versions (A, B and C), this field should be like <X Y Z>, where X
		corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z
		corresponds to version hierarchy C.

		Each level of hierarchy is represented by a 32 bit value, and so there can be
		only 32 different supported version per hierarchy. i.e. 1 bit per version. A
		value of 0xFFFFFFFF will enable the OPP for all versions for that hierarchy
		level. And a value of 0x00000000 will disable the OPP completely, and so we
		never want that to happen.

		If 32 values aren't sufficient for a version hierarchy, than that version
		hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the
		above example, Z1 & Z2 refer to the version hierarchy Z.

		- status: Marks the node enabled/disabled.

		Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
		@@ -157,20 +177,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
		compatible = "operating-points-v2";
		opp-shared;

		opp00 {
		opp@1000000000 {
		opp-hz = /bits/ 64 <1000000000>;
		opp-microvolt = <970000 975000 985000>;
		opp-microamp = <70000>;
		clock-latency-ns = <300000>;
		opp-suspend;
		};
		opp01 {
		opp@1100000000 {
		opp-hz = /bits/ 64 <1100000000>;
		opp-microvolt = <980000 1000000 1010000>;
		opp-microamp = <80000>;
		clock-latency-ns = <310000>;
		};
		opp02 {
		opp@1200000000 {
		opp-hz = /bits/ 64 <1200000000>;
		opp-microvolt = <1025000>;
		clock-latency-ns = <290000>;
		@@ -236,20 +256,20 @@ independently.
		* independently.
		*/

		opp00 {
		opp@1000000000 {
		opp-hz = /bits/ 64 <1000000000>;
		opp-microvolt = <970000 975000 985000>;
		opp-microamp = <70000>;
		clock-latency-ns = <300000>;
		opp-suspend;
		};
		opp01 {
		opp@1100000000 {
		opp-hz = /bits/ 64 <1100000000>;
		opp-microvolt = <980000 1000000 1010000>;
		opp-microamp = <80000>;
		clock-latency-ns = <310000>;
		};
		opp02 {
		opp@1200000000 {
		opp-hz = /bits/ 64 <1200000000>;
		opp-microvolt = <1025000>;
		opp-microamp = <90000;
		@@ -312,20 +332,20 @@ DVFS state together.
		compatible = "operating-points-v2";
		opp-shared;

		opp00 {
		opp@1000000000 {
		opp-hz = /bits/ 64 <1000000000>;
		opp-microvolt = <970000 975000 985000>;
		opp-microamp = <70000>;
		clock-latency-ns = <300000>;
		opp-suspend;
		};
		opp01 {
		opp@1100000000 {
		opp-hz = /bits/ 64 <1100000000>;
		opp-microvolt = <980000 1000000 1010000>;
		opp-microamp = <80000>;
		clock-latency-ns = <310000>;
		};
		opp02 {
		opp@1200000000 {
		opp-hz = /bits/ 64 <1200000000>;
		opp-microvolt = <1025000>;
		opp-microamp = <90000>;
		@@ -338,20 +358,20 @@ DVFS state together.
		compatible = "operating-points-v2";
		opp-shared;

		opp10 {
		opp@1300000000 {
		opp-hz = /bits/ 64 <1300000000>;
		opp-microvolt = <1045000 1050000 1055000>;
		opp-microamp = <95000>;
		clock-latency-ns = <400000>;
		opp-suspend;
		};
		opp11 {
		opp@1400000000 {
		opp-hz = /bits/ 64 <1400000000>;
		opp-microvolt = <1075000>;
		opp-microamp = <100000>;
		clock-latency-ns = <400000>;
		};
		opp12 {
		opp@1500000000 {
		opp-hz = /bits/ 64 <1500000000>;
		opp-microvolt = <1010000 1100000 1110000>;
		opp-microamp = <95000>;
		@@ -378,7 +398,7 @@ Example 4: Handling multiple regulators
		compatible = "operating-points-v2";
		opp-shared;

		opp00 {
		opp@1000000000 {
		opp-hz = /bits/ 64 <1000000000>;
		opp-microvolt = <970000>, /* Supply 0 */
		<960000>, /* Supply 1 */
		@@ -391,7 +411,7 @@ Example 4: Handling multiple regulators

		/* OR */

		opp00 {
		opp@1000000000 {
		opp-hz = /bits/ 64 <1000000000>;
		opp-microvolt = <970000 975000 985000>, /* Supply 0 */
		<960000 965000 975000>, /* Supply 1 */
		@@ -404,7 +424,7 @@ Example 4: Handling multiple regulators

		/* OR */

		opp00 {
		opp@1000000000 {
		opp-hz = /bits/ 64 <1000000000>;
		opp-microvolt = <970000 975000 985000>, /* Supply 0 */
		<960000 965000 975000>, /* Supply 1 */
		@@ -417,7 +437,8 @@ Example 4: Handling multiple regulators
		};
		};

		Example 5: Multiple OPP tables
		Example 5: opp-supported-hw
		(example: three level hierarchy of versions: cuts, substrate and process)

		/ {
		cpus {
		@@ -426,40 +447,73 @@ Example 5: Multiple OPP tables
		...

		cpu-supply = <&cpu_supply>
		operating-points-v2 = <&cpu0_opp_table_slow>, <&cpu0_opp_table_fast>;
		operating-points-names = "slow", "fast";
		operating-points-v2 = <&cpu0_opp_table_slow>;
		};
		};

		cpu0_opp_table_slow: opp_table_slow {
		opp_table {
		compatible = "operating-points-v2";
		status = "okay";
		opp-shared;

		opp00 {
		opp@600000000 {
		/*
		* Supports all substrate and process versions for 0xF
		* cuts, i.e. only first four cuts.
		*/
		opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
		opp-hz = /bits/ 64 <600000000>;
		opp-microvolt = <900000 915000 925000>;
		...
		};

		opp01 {
		opp@800000000 {
		/*
		* Supports:
		* - cuts: only one, 6th cut (represented by 6th bit).
		* - substrate: supports 16 different substrate versions
		* - process: supports 9 different process versions
		*/
		opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
		opp-hz = /bits/ 64 <800000000>;
		opp-microvolt = <900000 915000 925000>;
		...
		};
		};
		};

		cpu0_opp_table_fast: opp_table_fast {
		Example 6: opp-microvolt-<name>, opp-microamp-<name>:
		(example: device with two possible microvolt ranges: slow and fast)

		/ {
		cpus {
		cpu@0 {
		compatible = "arm,cortex-a7";
		...

		operating-points-v2 = <&cpu0_opp_table>;
		};
		};

		cpu0_opp_table: opp_table0 {
		compatible = "operating-points-v2";
		status = "okay";
		opp-shared;

		opp10 {
		opp@1000000000 {
		opp-hz = /bits/ 64 <1000000000>;
		...
		opp-microvolt-slow = <900000 915000 925000>;
		opp-microvolt-fast = <970000 975000 985000>;
		opp-microamp-slow = <70000>;
		opp-microamp-fast = <71000>;
		};

		opp11 {
		opp-hz = /bits/ 64 <1100000000>;
		...
		opp@1200000000 {
		opp-hz = /bits/ 64 <1200000000>;
		opp-microvolt-slow = <900000 915000 925000>, /* Supply vcc0 */
		<910000 925000 935000>; /* Supply vcc1 */
		opp-microvolt-fast = <970000 975000 985000>, /* Supply vcc0 */
		<960000 965000 975000>; /* Supply vcc1 */
		opp-microamp = <70000>; /* Will be used for both slow/fast */
		};
		};
		};

Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt

+6 −6

Original line number	Diff line number	Diff line
		@@ -134,12 +134,12 @@ mfio80 ddr_debug, mips_trace_data, mips_debug
		mfio81 dreq0, mips_trace_data, eth_debug
		mfio82 dreq1, mips_trace_data, eth_debug
		mfio83 mips_pll_lock, mips_trace_data, usb_debug
		mfio84 sys_pll_lock, mips_trace_data, usb_debug
		mfio85 wifi_pll_lock, mips_trace_data, sdhost_debug
		mfio86 bt_pll_lock, mips_trace_data, sdhost_debug
		mfio87 rpu_v_pll_lock, dreq2, socif_debug
		mfio88 rpu_l_pll_lock, dreq3, socif_debug
		mfio89 audio_pll_lock, dreq4, dreq5
		mfio84 audio_pll_lock, mips_trace_data, usb_debug
		mfio85 rpu_v_pll_lock, mips_trace_data, sdhost_debug
		mfio86 rpu_l_pll_lock, mips_trace_data, sdhost_debug
		mfio87 sys_pll_lock, dreq2, socif_debug
		mfio88 wifi_pll_lock, dreq3, socif_debug
		mfio89 bt_pll_lock, dreq4, dreq5
		tck
		trstn
		tdi

Documentation/devicetree/bindings/platform/msm/ipa.txt

+4 −0

Original line number	Diff line number	Diff line
		@@ -76,6 +76,10 @@ memory allocation over a PCIe bridge
		- qcom,tethered-flow-control: Boolean context flag to indicate whether
		apps based flow control is needed for tethered
		call.
		- qcom,rx-polling-sleep-ms: Receive Polling Timeout in millisecond,
		default is 1 millisecond.
		- qcom,ipa-polling-iteration: IPA Polling Iteration Count,default is 40.

		IPA pipe sub nodes (A2 static pipes configurations):

		-label: two labels are supported, a2-to-ipa and ipa-to-a2 which