Commit 8c10ab37 authored May 20, 2016 by Linux Build Service Account

Promotion of kernel.lnx.4.4-160519.

CRs Change ID Subject
--------------------------------------------------------------------------------------------------------------
998828 Ic108ce94daef4f96d1fa27b4057e49c01b9e9b8e msm: mdss: Add support for concurrent writeback
1009646 I85ca7046626048acb7a138dc174dc40efbba4ac9 arm64: mm: skip 1GB mappings on force pages
1001210 I3db5f233e7c182e330f5144b4ab0d0769abf4a8d defconfig: arm64: msmcortex: enable QPNP_POWER_ON suppor
1015492 I786d8edcd89e3624ef05ffc9a6953a8f840bbac0 soc: qcom: pil: timeouts to be disabled from pil-imem
1009646 I9ee1732ed0673edc7272d32469d08133fba9637f Kconfig: arm64: Update dependencies for CONFIG_FORCE_PAG
1015036 I0682801c0893a1b1516033b2ec0b0e2ec2713fdd ARM: dts: msm: disable PCIe on msmcobalt RUMI and SIM
1001827 I9b6109ccaf2858732a779d781222422c928128a1 ARM: dts: msm: add wil6210 node for msmcobalt
1013680 I9773555fb025a41afd27e078f6ef23a4d140128f ASoC: msmcobalt: Add USB audio via ADSP support
1001827 I08ee482ddc6c189241a69452fb12335d1ffb626f defconfig: msmcortex: enable bonding and TC drivers
1017123 Ibc5df71ddd0cfdabf82d3c1e47efca0d88823a2f clk: msm: osm: fix cores in retention as inactive select
1009646 I2aa4119b3aeb328a2b95cf22656d2ec36012716f arm64: mmu: dma remap fail with 1GB block mapping
1001210 Ic132efb650d4e8de561c3d1f95a281afeef4ce42 ARM: dts: msm: Add snapshot of power-on.h
1006303 Ie00cafeaceedb44100bda97f996ac3efa0e6c91f sched: fix compile error where !CONFIG_SCHED_HMP
1003242 I4d6c9ce254f4c4139313dfd33da6c8745f34a1d3 usb: gadget: gsi: Decrement USB gadget pm usage count on
1017606 I7d2ac7172396e5e08cde8ef156685222eb8941d8 defconfig: msm: Sync up with Kbuild defaults
990486 I6dad4ce061316680239b3f9c23e64b23a875eb75 msm: wlan: Add new country XA
1014436 Icf96a123b8d6e9c007198c2969d60e3707a57098 arm64: defconfig: msm: disable CPUSETS for msm chipsets
1018108 I5745dbcbb946ee2f937d1e77a68a4e87bc85e08e defconfig: Enable EA driver for msmcortex targets
977563 I5fbec3722407d2f3d0ff0d9f7097c5889e31fd62 perf: duplicate deletion of perf event
940415 Idac26ac45f1177db96fc3fb5d4a5e2f837f86d1b ASoC: msmcobalt: Add slimbus_6_rx back-end dai-link and
1009646 I022a9341f8ee44f281c7cb34769695843e97d684 mm: cma: sleep between retries in cma_alloc
713342 I401c70ab5de1df10363ec808cb68f72d8d74af96 ASoC: pcm: Add support for fixup callback
1016904 I2cb648b976d72d2020357881768674241557c56b ARM: dts: msm: Add TCSR_USB3_DP_PHYMODE register on msmc
988520 Iffd95234813a5dcd8ab7ec07a4ff1d2c679bb26f ARM: dts: msm: Add DSP memory region for msmcobalt
1016959 If590f65d033e264c04f0ad782895b02765ff4f3d msm: ADSPRPC: Support for secure context banks
1005018 I64ff559b85f901688a4abd0110ebb32a5317e34d usb: gadget: gsi: Use drain_workqueue instead of flush_w
1018673 I0fff3caee8f4e2e1ed4e036f9fa9e6717f5cdfd7 ARM: dts: msm: Update MPM interrupt mappings for cobalt
864924 Ic3f7c0e5b2a1055e7fdf52c78ded797a9a126d03 ASoC: compare CPU DAI stream name to find BE DAI
1017151 I33b172ca712064dcc86a87ae413f868f8d7d4342 ARM: dts: msm: Enable Camera VFE, Pproc, jpeg nodes for
1017209 Ife71e31622a53d0ea4cc418d434998e710352e10 msm: vidc: Enabling DPB-OPB split for NV12 color format
1018689 Ia56a64c9fa5973afe8c9830d42bd2f4228065f2f defconfig: arm64: msmcortex: Enable nqx nfc driver
987013 I32649a26f54d96c56d80aa2a1bd5f5d9dd0dd9d3 diag: Fix possible kernel addresses leak
1002899 Ifde043e5c39f356b4187a30cbdf020ee943618f1 iommu/iommu-debug: Maintain list of domains during alloc
1001210 Iaf46a2247e70e17ed0b0032038860bfa64e7f7c6 ARM: dts: msm: do not configure secondary pon reset for
1015484 I26609c4011f10c1a9ee62b092050394e064ee2a2 icnss: Avoid power-off if driver is registered
1010816 I3d4a2e5c778c23dd80644080fdad7512c5e71e33 msm: camera: sensor: Updating soc layer clock API for i2
1016938 I298acf633228b2c565736bf7bfd446d96f4e1983 clk: msm: clock-alpha-pll: Program the fabia PLL calibra
1016956 Ib2c86970b30cb575146438611a11fde17ab106e8 extcon: Add support for type-c connector orientation
1010438 I41c48e090ec4c44aeccd0e8fbbcb814b55c0416d arm64: process: Use continuation prints for show_data
1013343 Ide662b12aa59effa541febcd758426e72b4a1b12 msm: kgsl: Port GPU bus dcvs to kernel 4.4
1011199 I5e633e798a0655d783554538b83b4642ec428c8c ARM: dts: msm: add HW event device for msmcobalt
1012229 I3645a525c3ab5ef6d89eeaa99894542bd3aa261f iommu/arm-smmu: configure stream IDs for PCI-e devices d
1016904 I270596868762ccd4f2f2cc9b0daaca647a2bee88 usb: phy: qmp: Add support to select usb3 phy mode
1013947 I4f7944069306ba92e1fd82625bc15c7fa3bcdb0c block: zram: Fix compilation issues
890678 892310 955860 968399 993292 Ibb861ebdc63d45699369e23c077589d37e024b5e NFC: Add snapshot of NQxxx NFC driver
1015492 Id46bff3b3803d1316ea769581c0f1b0e7fa41498 soc: qcom: ramdump: Fix bug introduced in kernel upgrade

Change-Id: I5111c2949fc9a13810d5e0a9bb5775ca484265b9
CRs-Fixed: 1006303, 1017151, 987013, 940415, 1012229, 1009646, 1001210, 977563, 892310, 1016904, 1003242, 1001827, 1015492, 988520, 1017209, 1010816, 990486, 1005018, 1017123, 1018673, 1010438, 1015484, 1017606, 1015036, 1016956, 1018108, 1016959, 955860, 1016938, 890678, 1011199, 993292, 1018689, 1013343, 1014436, 1013680, 998828, 864924, 1013947, 1002899, 968399, 713342

parents d1f10c50 a981cd9b

Documentation/devicetree/bindings/nfc/nq-nci.txt

0 → 100644

+43 −0

Original line number	Diff line number	Diff line
		Qualcomm Technologies, Inc NQxxxx NFC NCI device

		Near Field Communication (NFC) device is based on NFC Controller Interface (NCI)

		Required properties:

		- compatible: "qcom,nq-nci"
		- reg: NCI i2c slave address.
		- qcom,nq-ven: specific gpio for hardware reset.
		- qcom,nq-irq: specific gpio for read interrupt.
		- interrupt-parent: Should be phandle for the interrupt controller
		that services interrupts for this device.
		- interrupts: Nfc read interrupt,gpio-clk-req interrupt


		Recommended properties:

		- interrupt-names: names of interrupts, should include "nfc_irq", used for reference


		Optional properties:

		- pinctrl-names, pinctrl-0, pincntrl-1: references to our pincntrl settings
		- clocks, clock-names: must contain the NQxxxx's core clock.

		Example:

		nq-nci@2b {
		compatible = "qcom,nq-nci";
		reg = <0x2b>;
		qcom,irq-gpio = <&tlmm 29 0x00>;
		qcom,en-gpio = <&tlmm 30 0x00>;
		qcom,clk-src = "BBCLK2";
		interrupt-parent = <&tlmm>;
		interrupts = <29 0>;
		interrupt-names = "nfc_irq";
		pinctrl-names = "nfc_active","nfc_suspend";
		pinctrl-0 = <&nfc_int_active &nfc_disable_active>;
		pinctrl-1 = <&nfc_int_suspend &nfc_disable_suspend>;
		qcom,clk-gpio = <&pm8916_gpios 2 0>;
		clocks = <&clock_rpm clk_bb_clk2_pin>;
		clock-names = "ref_clk";
		};

Documentation/devicetree/bindings/usb/msm-phy.txt

+3 −1

Original line number	Diff line number	Diff line
		@@ -116,7 +116,9 @@ Required properties:
		USB3_PHY_START

		Optional properties:
		- reg: Additional register set of address and length to control QMP PHY
		- reg: Additional register set of address and length to control QMP PHY are:
		"tcsr_usb3_dp_phymode" : top-level CSR register to be written to select
		super speed usb qmp phy.
		- qcom,vbus-valid-override: If present, indicates VBUS pin is not connected to
		the USB PHY and the controller must rely on external VBUS notification in
		order to manually relay the notification to the SSPHY.

arch/arm/boot/dts/qcom/msm-pmicobalt.dtsi

+0 −1

Original line number	Diff line number	Diff line
		@@ -28,7 +28,6 @@
		qcom,power-on@800 {
		compatible = "qcom,qpnp-power-on";
		reg = <0x800 0x100>;
		qcom,secondary-pon-reset;
		};

		pmicobalt_gpios: gpios {

arch/arm/boot/dts/qcom/msmcobalt-camera.dtsi

+6 −6

Original line number	Diff line number	Diff line
		@@ -378,7 +378,7 @@
		<0x24 0x10000000>,
		<0x28 0x10000000>,
		<0x2C 0x10000000>;
		status = "disabled";
		status = "ok";
		qcom,msm-bus,name = "msm_camera_cpp";
		qcom,msm-bus,num-cases = <2>;
		qcom,msm-bus,num-paths = <1>;
		@@ -516,7 +516,7 @@
		qcom,clock-rates = <0 0 0 0 0 0 0 0 0 0 0 384000000 0
		0 0 0 0 0 0 0 0 0 0 0 576000000 0
		0 0 0 0 0 0 0 0 0 0 0 600000000 0>;
		status = "disabled";
		status = "ok";
		qos-entries = <8>;
		qos-regs = <0x404 0x408 0x40c 0x410 0x414 0x418
		0x41c 0x420>;
		@@ -596,7 +596,7 @@
		qcom,clock-rates = <0 0 0 0 0 0 0 0 0 0 0 384000000 0
		0 0 0 0 0 0 0 0 0 0 0 576000000 0
		0 0 0 0 0 0 0 0 0 0 0 600000000 0>;
		status = "disabled";
		status = "ok";
		qos-entries = <8>;
		qos-regs = <0x404 0x408 0x40c 0x410 0x414 0x418
		0x41c 0x420>;
		@@ -717,7 +717,7 @@
		"mmss_bimc_smmu_axi_clk",
		"mmss_camss_ahb_clk",
		"mmss_camss_top_ahb_clk",
		"mmss_camss_jpeg0_clk",
		"core_clk",
		"mmss_camss_jpeg_ahb_clk",
		"mmss_camss_jpeg_axi_clk";
		clocks = <&clock_mmss clk_mmss_mnoc_maxi_clk>,
		@@ -741,7 +741,7 @@
		qcom,msm-bus,num-paths = <1>;
		qcom,msm-bus,vectors-KBps = <62 512 0 0>,
		<62 512 666675 666675>;
		status = "disabled";
		status = "ok";
		};

		qcom,jpeg@caa0000 {
		@@ -784,7 +784,7 @@
		qcom,msm-bus,vectors-KBps = <62 512 0 0>,
		<62 512 666675 666675>;
		qcom,max-ds-factor = <128>;
		status = "disabled";
		status = "ok";
		};
		};

arch/arm/boot/dts/qcom/msmcobalt-cdp.dtsi

+4 −0

Original line number	Diff line number	Diff line
		@@ -280,3 +280,7 @@
		qcom,thermal-node;
		};
		};

		&wil6210 {
		status = "ok";
		};