Commit 89c198ac authored May 25, 2016 by Linux Build Service Account

Promotion of kernel.lnx.4.4-160524.

CRs Change ID Subject
--------------------------------------------------------------------------------------------------------------
1019225 I136c0d3583cef15b3ba22fbf6b8acbe014f9e8ab input: qpnp-power-on: modify the bit range to store rest
1018162 I715cf7ad7975c6e020458f623262dc02927795a7 soc: qcom: watchdog_v2: Support userspace watchdog
991557 I2a470fb906bb9747f0e1b2c08a231edecc184036 cpuidle: lpm_levels: Remove duplicate cpuidle tracepoint
1019888 Iab07f3dd933a9faf8a7ada737c9e9389d185d6e3 crypto: msm: Update Kconfig to enable hw crypto driver f
1008137 I999db2865d10464c7f1ab4a5a940d23c725ac033 diag: Fix for possible stale task entries
1019313 I5f66be80899c33816c886df526db9e50d7e9aff9 qcom-charger: qpnp-smb2: disable Type-C factory mode
987010 I7baa9f127266726fecf9238167a1e0128a258847 ASoC: msm: qdsp6v2: Change audio drivers to use %pK
1010222 I060ea878b55ce0f9983b91c50e58718c8a2c2fa1 USB: dwc3: debugfs: Add boundary check in dwc3_store_ep_
1021066 I8d411e067690443eefea645f4ff8130cf786c32f icnss: Provide test mode through debugfs
1018709 Ie9a21544966fb54cf9920e9c719309cc66157846 usb: gadget: Iterate over all IN EPs for allocation of T
993024 Ic21c25a33a8b2430903e9c1f3d339022551d81d6 msm: mdss: Defer wb probe until mdss probe done
1016916 I4da057a32b57af6431ead37522f877b114188699 ARM: dts: add CSR device for msmcobalt
949595 I96bf477a14bb135cf9196532cf4bf39a45c9ff77 pwm: qpnp: support DTEST configuration for PWM subtype
1008396 I92969b7b59a64018b80470566567887248ced2bd msm: pcie: add support to get PCIe port PHY sequence fro
1009283 Ibf4abb99e5e3e7aa9a9212b57094876f6ec6e9f0 pwm: qpnp: Enable glitch removal selectively
1018890 Iead0966d76acb2d2bbc41fa9cd5d09a252a3429e msm: ADSPRPC: Provide SMMU information
1019888 Ic2b623bf871bc3918d3d58f99966ac7f746d7b8a defconfig: msmcortex: enable qcom hw crypto drivers
978785 I025a59d92aca2585335768c94f7a188c339aa788 msm: mdss: Add remaining interleaved YUV format to defin
984628 I50de4488c32ef78efec1587305c56ab06fb32fed pwm: qpnp: configure PWM period during bootup
1015446 If69f3752c4295f4cc49cf41854edc03aa90dbbc5 clk: msm: clock: Support peripheral clocks on MSMCOBALT
1019697 I1a77291e77410c6ed99474335a6d25742c409e47 coresight: add stm logging to support optimization in tr
973565 I2376f10161040dbf426887ce146ac597f401153f msm: kgsl: Create sysfs entry to control GPU NAP state
1019289 I5dc7d8ed4407df5baa94e069b00897086bd02ab8 msm: mdss: dsi: add ulps support for DSI PHY v3
1016914 I1537c92ac86964fdbe9abb012f972d5f3b36047a jtagv8: add jtagv8 support snapshot
1019888 I5d2861bdb934ac0224fa73b59b350d0d360f5c95 ARM: dts: Add qcedev & qcrypto drivers support for msmco
1015532 Idf381b86cd44679ea1f8b6fbfe85b2616232f533 ARM: dts: add remote etm devices for msmcobalt
1019289 Ie5c171e13dcccc711ba03acb38fcd7876e792cee clk: msm: mdss: fix DSI PLL programming for msmcobalt
1016914 Iafc718d5fe3ee392836035c7d301ad2ed6d5f148 soc: qcom: set default enable for MSM_JTAGV8
1010839 I2ed58d3e61ca4c64cf72569541fc6ee7f6ba651f msm: mdss: Set dither matrix len to 0 for default config
1017305 Idc4556e568a42aa2441295c9e3caa3f2c92c4cc6 diag: Fix to proper updation of buffering flag
1016914 Iff5ba04b2e494f7a5de00e4d05606878ee3d8148 arch: arm64: disable HW breakpoint
1018890 I3d7fb2829defd8efc362253866587652f35e316b msm: ADSPRPC: Map pages with execute permissions
1007521 I6d060afb48aca34c2bb54221c5babc0ac55aff7c msm: vidc: Add SEI extradata
1008138 I7d78a13032365a42097ad71cfd0abab2792a1b98 diag: Fix for possible dci error notification
984942 992683 Ifcd9f14dc03d9e42a31b3e126839489881e98303 diag: Fix for possible dci stale entries
1019806 I064c208557bc7b74bcb342fea76df9c9e10c8405 ARM: dts: configure trigout function for gpio 58
1019697 I4fcb42f2e97ab963fdc85853f4f3ea1f208bfc3c coresight: enable stm logging for trace events, marker a
1019289 Ie3a2da3c306bc8a85aaf1495afb365c38cf805aa ARM: dts: msm: add support for nt35597 DSC panels on msm
989505 Iebcde6d233ff8580aa83b1885f1e8a01644dd1f4 msm: ipa3: add ipa_mhi to ipa_clients
1012715 I6dbc344d5d7063c7cfd2fb29c2c39fdee1250bbf ASoC: wcd_cpe_core: Connect to input AFE port during LSM
1018890 I93e3c6faa400121612d90f9be8fd5befe45fb39c msm: ADSPRPC: Provide process information in context
1001827 Ib2118f323b5dc1d64eaa5aa1f600e4725187f05b defconfig: msmcortex: enable wil driver
1018785 I64d0abe7091f81f85e83747f09ece4bc524a4057 clk: msm: clock-gpu-cobalt: Correct the CRC enable seque
1019201 I64472af6e9983929e0d3ea08601d17c7a2b7c4ef msm: mdss: Fix elements ordering of all YUV interleaved
1019089 If6aaef3b04a9da15c7f8cfaf1308706b8a2fe793 soc: qcom: socinfo: Add soc ids for MSM8996pro and APQ80
1019289 If5e6a6b0d7753e3fc83ed6df5d866a62eb5cd60b ARM: dts: msm: add nt35597 dual dsi cmd mode panel for m
987962 Id0f46265b10fa06f71a9085aa302536c5f14d295 ARM: dts: msm: Add extra clocks for ispif node for msmco
1021055 Icd56b61a372cb18e6600617184d8b185b78ce99d icnss: Remove unused APIs
1019156 I425087a02b680a5a1bc0579fd4d1410eb92d8e4c extcon: Add support for USB connector speed
1015446 Ibf5a8d7b6bc484281f414dd8491845e509d80123 ARM: dts: msm: Enable the GCC clock driver on MSMCOBALT
1018162 I1a62b6ec73e7cd581a535316029956ea7ce23ba0 soc: qcom: watchdog_v2: Change completion to wait_queue

Change-Id: I056063f90d4074d11b3092aece0ea64be9d6d9fe
CRs-Fixed: 1019225, 1009283, 987010, 1019089, 991557, 1019201, 1008137, 1021055, 987962, 1012715, 1008138, 993024, 1001827, 1021066, 1008396, 949595, 1015532, 1019697, 1018890, 992683, 1017305, 984942, 1010222, 1015446, 1019313, 1019156, 1018162, 978785, 1019888, 1018785, 1016916, 1016914, 1019806, 1007521, 973565, 1019289, 1018709, 989505, 1010839, 984628

parents 52b2ed5f 8a53f7d7

Documentation/devicetree/bindings/arm/msm/clock-controller.txt

+1 −0

Original line number	Diff line number	Diff line
		@@ -64,6 +64,7 @@ Required properties:
		"qcom,gcc-mdm9607"
		"qcom,cc-debug-mdm9607"
		"qcom,gcc-cobalt"
		"qcom,gcc-cobalt-v2"
		"qcom,gcc-hamster"
		"qcom,cc-debug-cobalt"
		"qcom,gpucc-cobalt"

Documentation/devicetree/bindings/arm/msm/msm_watchdog.txt

+6 −0

Original line number	Diff line number	Diff line
		@@ -22,6 +22,12 @@ Required properties:
		- interrupts : should contain bark and bite irq numbers
		- qcom,pet-time : Non zero time interval at which watchdog should be pet in ms.
		- qcom,bark-time : Non zero timeout value for a watchdog bark in ms.
		- qcom,userspace-watchdog :
		(boolean) Allow enabling the userspace-watchdog feature. This feature
		requires userspace to pet the watchdog every qcom,pet-time interval
		in addition to the existing kernel-level checks.
		This feature is supported through device sysfs files.


		Optional properties:

Documentation/devicetree/bindings/pci/msm_pcie.txt

+10 −0

Original line number	Diff line number	Diff line
		@@ -75,6 +75,9 @@ Optional Properties:
		- qcom,pcie-phy-ver: version of PCIe PHY.
		- qcom,phy-sequence: The initialization sequence to bring up the PCIe PHY.
		Should be specified in groups (offset, value, delay).
		- qcom,port-phy-sequence: The initialization sequence to bring up the
		PCIe port PHY.
		Should be specified in groups (offset, value, delay).
		- qcom,use-19p2mhz-aux-clk: The frequency of PCIe AUX clock is 19.2MHz.
		- qcom,ep-wakeirq: The endpoint will issue wake signal when it is up, and the
		root complex has the capability to enumerate the endpoint for this case.
		@@ -197,6 +200,13 @@ Example:
		0x15c 0x06 0x00
		0x090 0x01 0x00
		0x808 0x03 0x00>;
		qcom,port-phy-sequence = <0x804 0x01 0x00
		0x034 0x14 0x00
		0x138 0x30 0x00
		0x048 0x0f 0x00
		0x15c 0x06 0x00
		0x090 0x01 0x00
		0x808 0x03 0x00>;
		perst-gpio = <&msmgpio 70 0>;
		wake-gpio = <&msmgpio 69 0>;
		clkreq-gpio = <&msmgpio 68 0>;

Documentation/devicetree/bindings/pwm/pwm-qpnp.txt

+15 −8

Original line number	Diff line number	Diff line
		@@ -33,14 +33,21 @@ Optional device bindings:
		- qcom,channel-owner: A string value to supply owner information.
		- qcom,mode-select: 0 = PWM mode
		1 = LPG mode
		- qcom,lpg-dtest-line: indicates which DTEST line to be configured for LPG
		output. Possible values are 1, 2, 3 and 4.
		- qcom,dtest-line: indicates which DTEST line to be configured for LPG
		or PWM output. For LPG subtypes, possible values are 1,
		2, 3 and 4. For PWM subtype, possibe values are 1 and 2.
		- qcom,dtest-output: indicates the output configuration for DTEST line.
		For LPG subtypes, possible output values are:
		0 = Disabled
		1 = LPG output low
		2 = LPG output high
		3,4,5 = DTEST line specific configuration
		6,7 = Not used
		For PWM subtype, possible output values are:
		0 = Disabled
		1 = pwm_out for DTEST1 or reserved
		2 = pwm_out for DTEST2 or reserved
		3 = Not used
		If this binding is specified along with the required bindings of PWM/LPG then
		in addition to configure PWM/LPG the qpnp-pwm driver also enables the feature
		at the probe time. In the case where the binding is not specified the qpnp-pwm
		@@ -181,7 +188,7 @@ Example:
		qcom,ramp-index = <1>;
		qcom,force-pwm-size = <9>;
		qcom,period = <6000000>;
		qcom,lpg-dtest-line = <3>;
		qcom,dtest-line = <3>;
		qcom,dtest-output = <1>;
		status = "okay";

arch/arm/boot/dts/qcom/apq8096-auto-dragonboard.dtsi

+1 −1

Original line number	Diff line number	Diff line
		@@ -678,7 +678,7 @@
		&spmi_bus {
		qcom,pm8994@1 {
		pwm@b100 {
		qcom,lpg-dtest-line = <4>;
		qcom,dtest-line = <4>;
		qcom,dtest-output = <1>;
		status = "okay";
		};