Merge "ARM: dts: msm: Add support for TOF sensor on msm8998 QVR" (72d01fe5) · Commits · e / devices / android_kernel_sony_msm8998

arch/arm/boot/dts/qcom/msm8998-camera-sensor-qrd-vr1.dtsi

+55 −1

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2016, The Linux Foundation. All rights reserved.
		* Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		@@ -345,6 +345,60 @@
		clock-names = "cam_src_clk", "cam_clk";
		qcom,clock-rates = <24000000 0>;
		};

		/* ToF Camera*/
		qcom,camera@3 {
		cell-index = <3>;
		compatible = "qcom,camera";
		reg = <0x3>;
		qcom,csiphy-sd-index = <1>;
		qcom,csid-sd-index = <3>;
		qcom,mount-angle = <90>;
		cam_vio-supply = <&pm8998_lvs1>;
		qcom,cam-vreg-name = "cam_vio";
		qcom,cam-vreg-min-voltage = <1800000>;
		qcom,cam-vreg-max-voltage = <1800000>;
		qcom,cam-vreg-op-mode = <80000>;
		qcom,gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk3_active
		&cam_sensor_depth_v1_active
		&cam_sensor_depth_v2_active
		&cam_sensor_depth_default>;
		pinctrl-1 = <&cam_sensor_mclk3_suspend
		&cam_sensor_depth_v1_sleep
		&cam_sensor_depth_v2_sleep
		&cam_sensor_depth_sleep>;
		gpios = <&tlmm 16 0>,
		<&tlmm 24 0>,
		<&tlmm 21 0>,
		<&tlmm 28 0>,
		<&tlmm 23 0>,
		<&tlmm 7 0>;
		qcom,gpio-vana = <1>;
		qcom,gpio-custom2 = <2>;
		qcom,gpio-reset = <3>;
		qcom,gpio-custom3 = <4>;
		qcom,gpio-custom1 = <5>;
		qcom,gpio-req-tbl-num = <0 1 2 3 4 5>;
		qcom,gpio-req-tbl-flags = <1 0 0 0 1 1>;
		qcom,gpio-req-tbl-label =
		"CAMIF_MCLK3",
		"CAM_VANA",
		"CAM_CUSTOM2",
		"CAM_RESET1",
		"CAM_CUSTOM3",
		"CAM_CUSTOM1";
		qcom,sensor-position = <1>; /* 0 rear */
		qcom,sensor-mode = <0>;
		qcom,cci-master = <1>; /* I2C 1 */
		status = "ok";
		clocks = <&clock_mmss clk_mclk3_clk_src>,
		<&clock_mmss clk_mmss_camss_mclk3_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		qcom,clock-rates = <24000000 0>;
		};

		};

		&pm8998_gpios {

arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi

+80 −0

Original line number	Diff line number	Diff line
		@@ -993,6 +993,86 @@
		};
		};

		cam_sensor_depth_default: cam_sensor_depth_default {
		mux {
		pins = "gpio28","gpio23","gpio7";
		function = "gpio";
		};

		config {
		pins = "gpio28","gpio23","gpio7";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_depth_sleep: cam_sensor_depth_sleep {
		mux {
		pins = "gpio28","gpio23","gpio7";
		function = "gpio";
		};

		config {
		pins = "gpio28","gpio23","gpio7";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_depth_v1_active: cam_sensor_depth_v1_active {
		/* Depth VANA */
		mux {
		pins = "gpio24";
		function = "gpio";
		};

		config {
		pins = "gpio24";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_depth_v1_sleep: cam_sensor_depth_v1_sleep {
		mux {
		pins = "gpio24";
		function = "gpio";
		};

		config {
		pins = "gpio24";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_depth_v2_active: cam_sensor_depth_v2_active {
		/* Depth CUSTOM2 */
		mux {
		pins = "gpio21";
		function = "gpio";
		};

		config {
		pins = "gpio21";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_depth_v2_sleep: cam_sensor_depth_v2_sleep {
		mux {
		pins = "gpio21";
		function = "gpio";
		};

		config {
		pins = "gpio21";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk0_active: cam_sensor_mclk0_active {
		/* MCLK0 */
		mux {