Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit daca2e77 authored by Vijay kumar Tumati's avatar Vijay kumar Tumati Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: Add support for TOF sensor on msm8998 QVR 



Add device tree entries to support depth sensor.

Change-Id: I7b2219b95e69b44a4048a4f163b1b079a55050e1
Signed-off-by: default avatarVijay kumar Tumati <vtumati@codeaurora.org>
parent 8069e329

arch/arm/boot/dts/qcom/msm8998-camera-sensor-qrd-vr1.dtsi

+55 −1
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2016, The Linux Foundation. All rights reserved.

 * Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and
@@ -345,6 +345,60 @@ 
		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	/* ToF Camera*/

	qcom,camera@3 {

		cell-index = <3>;

		compatible = "qcom,camera";

		reg = <0x3>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <3>;

		qcom,mount-angle = <90>;

		cam_vio-supply = <&pm8998_lvs1>;

		qcom,cam-vreg-name = "cam_vio";

		qcom,cam-vreg-min-voltage = <1800000>;

		qcom,cam-vreg-max-voltage = <1800000>;

		qcom,cam-vreg-op-mode = <80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk3_active

			&cam_sensor_depth_v1_active

			&cam_sensor_depth_v2_active

			&cam_sensor_depth_default>;

		pinctrl-1 = <&cam_sensor_mclk3_suspend

			&cam_sensor_depth_v1_sleep

			&cam_sensor_depth_v2_sleep

			&cam_sensor_depth_sleep>;

		gpios = <&tlmm 16 0>,

			<&tlmm 24 0>,

			<&tlmm 21 0>,

			<&tlmm 28 0>,

			<&tlmm 23 0>,

			<&tlmm 7 0>;

		qcom,gpio-vana = <1>;

		qcom,gpio-custom2 = <2>;

		qcom,gpio-reset = <3>;

		qcom,gpio-custom3 = <4>;

		qcom,gpio-custom1 = <5>;

		qcom,gpio-req-tbl-num = <0 1 2 3 4 5>;

		qcom,gpio-req-tbl-flags = <1 0 0 0 1 1>;

		qcom,gpio-req-tbl-label =

			"CAMIF_MCLK3",

			"CAM_VANA",

			"CAM_CUSTOM2",

			"CAM_RESET1",

			"CAM_CUSTOM3",

			"CAM_CUSTOM1";

		qcom,sensor-position = <1>; /* 0 rear */

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>; /* I2C 1 */

		status = "ok";

		clocks = <&clock_mmss clk_mclk3_clk_src>,

			<&clock_mmss clk_mmss_camss_mclk3_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



};



&pm8998_gpios {

arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi

+80 −0
Original line number Diff line number Diff line
@@ -993,6 +993,86 @@ 
			};

		};



		cam_sensor_depth_default: cam_sensor_depth_default {

			mux {

				pins = "gpio28","gpio23","gpio7";

				function = "gpio";

			};



			config {

				pins = "gpio28","gpio23","gpio7";

				bias-disable; /* No PULL */

				drive-strength = <2>; /* 2 MA */

			};

		};



		cam_sensor_depth_sleep: cam_sensor_depth_sleep {

			mux {

				pins = "gpio28","gpio23","gpio7";

				function = "gpio";

			};



			config {

				pins = "gpio28","gpio23","gpio7";

				bias-disable; /* No PULL */

				drive-strength = <2>; /* 2 MA */

			};

		};



		cam_sensor_depth_v1_active: cam_sensor_depth_v1_active {

			/* Depth VANA */

			mux {

				pins = "gpio24";

				function = "gpio";

			};



			config {

				pins = "gpio24";

				bias-disable; /* No PULL */

				drive-strength = <2>; /* 2 MA */

			};

		};



		cam_sensor_depth_v1_sleep: cam_sensor_depth_v1_sleep {

			mux {

				pins = "gpio24";

				function = "gpio";

			};



			config {

				pins = "gpio24";

				bias-disable; /* No PULL */

				drive-strength = <2>; /* 2 MA */

			};

		};



		cam_sensor_depth_v2_active: cam_sensor_depth_v2_active {

			/* Depth CUSTOM2 */

			mux {

				pins = "gpio21";

				function = "gpio";

			};



			config {

				pins = "gpio21";

				bias-disable; /* No PULL */

				drive-strength = <2>; /* 2 MA */

			};

		};



		cam_sensor_depth_v2_sleep: cam_sensor_depth_v2_sleep {

			mux {

				pins = "gpio21";

				function = "gpio";

			};



			config {

				pins = "gpio21";

				bias-disable; /* No PULL */

				drive-strength = <2>; /* 2 MA */

			};

		};



		cam_sensor_mclk0_active: cam_sensor_mclk0_active {

			/* MCLK0 */

			mux {