Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 349291cf authored by Shankar Ravi's avatar Shankar Ravi
Browse files

ARM: dts: msm: Enable camera for sdm630 



1. Add FRONT, BACK, AUX camera nodes.
2. Add CSID, CSIPHY,ISPIF, VFE, JPEG, CPP, nodes.
3. Add GPIO configuration in pinctrl.
4. Add support for upstream clock config.
5. Add sensor VAF to LDO8 with min vote of 2.8.

Change-Id: I49f1ec1941a080d85812309c7a8cce7302c49e25
Signed-off-by: default avatarShankar Ravi <rshankar@codeaurora.org>
parent f44d9e36

arch/arm/boot/dts/qcom/sdm630-camera-sensor-cdp.dtsi

0 → 100644
+370 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&soc {

	led_flash0: qcom,camera-flash@0 {

		cell-index = <0>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pm660l_flash0 &pm660l_flash1>;

		qcom,torch-source = <&pm660l_torch0 &pm660l_torch1>;

		qcom,switch-source = <&pm660l_switch0>;

		status = "ok";

	};



	led_flash1: qcom,camera-flash@1 {

		cell-index = <1>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pm660l_flash2>;

		qcom,torch-source = <&pm660l_torch2>;

		qcom,switch-source = <&pm660l_switch1>;

		status = "ok";

	};

};



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm660l_l8>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <3400000>;

		qcom,cam-vreg-op-mode = <100000>;

	};



	actuator1: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <1>;

		cam_vaf-supply = <&pm660l_l8>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <3400000>;

		qcom,cam-vreg-op-mode = <100000>;

	};



	actuator2: qcom,actuator@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,actuator";

		qcom,cci-master = <1>;

		cam_vaf-supply = <&pm660l_l8>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <3400000>;

		qcom,cam-vreg-op-mode = <100000>;

	};



	ois0: qcom,ois@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,ois";

		qcom,cci-master = <0>;

		gpios = <&tlmm 50 0>;

		qcom,gpio-vaf = <0>;

		qcom,gpio-req-tbl-num = <0>;

		qcom,gpio-req-tbl-flags = <0>;

		qcom,gpio-req-tbl-label = "CAM_VAF";

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_actuator_vaf_active>;

		pinctrl-1 = <&cam_actuator_vaf_suspend>;

		status = "disabled";

	};



	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&pm660l_bob>;

		cam_vdig-supply = <&pm660_s5>;

		cam_vaf-supply = <&pm660l_l8>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

					"cam_vaf";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000 2800000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000 3400000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 32 0>,

			<&tlmm 46 0>,

			<&pm660l_gpios 4 0>,

			<&tlmm 51 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VDIG",

					"CAM_VANA";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss MCLK0_CLK_SRC>,

				<&clock_mmss MMSS_CAMSS_MCLK0_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	eeprom1: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&pm660l_bob>;

		cam_vdig-supply = <&pm660_s5>;

		cam_vaf-supply = <&pm660l_l8>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

					"cam_vaf";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000 2800000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000 3400000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

			&cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

			&cam_sensor_rear2_suspend>;

		gpios = <&tlmm 34 0>,

		    <&tlmm 48 0>,

		    <&pm660l_gpios 3 0>,

		    <&tlmm 51 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

				"CAM_RESET",

				"CAM_VDIG",

				"CAM_VANA";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK2_CLK_SRC>,

		    <&clock_mmss MMSS_CAMSS_MCLK2_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	eeprom2: qcom,eeprom@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&pm660l_bob>;

		cam_vdig-supply = <&pm660_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

					"cam_vaf";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000 2800000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000 3400000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 33 0>,

			<&tlmm 47 0>,

			<&pm660_gpios 3 0>,

			<&tlmm 44 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VDIG",

					"CAM_VANA";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK1_CLK_SRC>,

			<&clock_mmss MMSS_CAMSS_MCLK1_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <270>;

		qcom,led-flash-src = <&led_flash0>;

		qcom,actuator-src = <&actuator0>;

		qcom,ois-src = <&ois0>;

		qcom,eeprom-src = <&eeprom0>;

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&pm660l_bob>;

		cam_vdig-supply = <&pm660_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				 &cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				 &cam_sensor_rear_suspend>;

		gpios = <&tlmm 32 0>,

			<&tlmm 46 0>,

			<&pm660l_gpios 4 0>,

			<&tlmm 51 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VDIG",

					"CAM_VANA";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss MCLK0_CLK_SRC>,

				<&clock_mmss MMSS_CAMSS_MCLK0_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <90>;

		qcom,actuator-src = <&actuator1>;

		qcom,eeprom-src = <&eeprom1>;

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&pm660l_bob>;

		cam_vdig-supply = <&pm660_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 34 0>,

			<&tlmm 48 0>,

			<&pm660l_gpios 3 0>,

			<&tlmm 51 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

					  "CAM_RESET",

					  "CAM_VDIG",

					  "CAM_VANA";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK2_CLK_SRC>,

			<&clock_mmss MMSS_CAMSS_MCLK2_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <90>;

		qcom,actuator-src = <&actuator2>;

		qcom,eeprom-src = <&eeprom2>;

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&pm660l_bob>;

		cam_vdig-supply = <&pm660_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 33 0>,

			<&tlmm 47 0>,

			<&pm660l_gpios 3 0>,

			<&tlmm 51 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VDIG",

					"CAM_VANA";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK1_CLK_SRC>,

			<&clock_mmss MMSS_CAMSS_MCLK1_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

};



&pm660l_gpios {

	gpio@c300 { /* GPIO4 -CAMERA SENSOR 0 VDIG*/

		qcom,mode = <1>;                /* Output */

		qcom,pull = <5>;                /* No Pull */

		qcom,vin-sel = <0>;             /* VIN1 GPIO_LV */

		qcom,src-sel = <0>;             /* GPIO */

		qcom,invert = <0>;              /* Invert */

		qcom,master-en = <1>;           /* Enable GPIO */

		status = "ok";

	};



	gpio@c200 { /* GPIO3 -CAMERA SENSOR 2 VDIG*/

		qcom,mode = <1>;                /* Output */

		qcom,pull = <5>;                /* No Pull */

		qcom,vin-sel = <0>;             /* VIN1 GPIO_LV */

		qcom,src-sel = <0>;             /* GPIO */

		qcom,invert = <0>;              /* Invert */

		qcom,master-en = <1>;           /* Enable GPIO */

		status = "ok";

	};

};

arch/arm/boot/dts/qcom/sdm630-camera-sensor-mtp.dtsi

0 → 100644
+370 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&soc {

	led_flash0: qcom,camera-flash@0 {

		cell-index = <0>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pm660l_flash0 &pm660l_flash1>;

		qcom,torch-source = <&pm660l_torch0 &pm660l_torch1>;

		qcom,switch-source = <&pm660l_switch0>;

		status = "ok";

	};



	led_flash1: qcom,camera-flash@1 {

		cell-index = <1>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pm660l_flash2>;

		qcom,torch-source = <&pm660l_torch2>;

		qcom,switch-source = <&pm660l_switch1>;

		status = "ok";

	};

};



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm660l_l8>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <3400000>;

		qcom,cam-vreg-op-mode = <100000>;

	};



	actuator1: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <1>;

		cam_vaf-supply = <&pm660l_l8>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <3400000>;

		qcom,cam-vreg-op-mode = <100000>;

	};



	actuator2: qcom,actuator@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,actuator";

		qcom,cci-master = <1>;

		cam_vaf-supply = <&pm660l_l8>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <3400000>;

		qcom,cam-vreg-op-mode = <100000>;

	};



	ois0: qcom,ois@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,ois";

		qcom,cci-master = <0>;

		gpios = <&tlmm 50 0>;

		qcom,gpio-vaf = <0>;

		qcom,gpio-req-tbl-num = <0>;

		qcom,gpio-req-tbl-flags = <0>;

		qcom,gpio-req-tbl-label = "CAM_VAF";

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_actuator_vaf_active>;

		pinctrl-1 = <&cam_actuator_vaf_suspend>;

		status = "disabled";

	};



	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&pm660l_bob>;

		cam_vdig-supply = <&pm660_s5>;

		cam_vaf-supply = <&pm660l_l8>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

					"cam_vaf";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000 2800000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000 3400000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 32 0>,

			<&tlmm 46 0>,

			<&pm660l_gpios 4 0>,

			<&tlmm 51 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VDIG",

					"CAM_VANA";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss MCLK0_CLK_SRC>,

				<&clock_mmss MMSS_CAMSS_MCLK0_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	eeprom1: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&pm660l_bob>;

		cam_vdig-supply = <&pm660_s5>;

		cam_vaf-supply = <&pm660l_l8>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

					"cam_vaf";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000 2800000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000 3400000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

			&cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

			&cam_sensor_rear2_suspend>;

		gpios = <&tlmm 34 0>,

		    <&tlmm 48 0>,

		    <&pm660l_gpios 3 0>,

		    <&tlmm 51 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

				"CAM_RESET",

				"CAM_VDIG",

				"CAM_VANA";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK2_CLK_SRC>,

		    <&clock_mmss MMSS_CAMSS_MCLK2_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	eeprom2: qcom,eeprom@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&pm660l_bob>;

		cam_vdig-supply = <&pm660_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

					"cam_vaf";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000 2800000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000 3400000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 33 0>,

			<&tlmm 47 0>,

			<&pm660_gpios 3 0>,

			<&tlmm 44 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VDIG",

					"CAM_VANA";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK1_CLK_SRC>,

			<&clock_mmss MMSS_CAMSS_MCLK1_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <270>;

		qcom,led-flash-src = <&led_flash0>;

		qcom,actuator-src = <&actuator0>;

		qcom,ois-src = <&ois0>;

		qcom,eeprom-src = <&eeprom0>;

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&pm660l_bob>;

		cam_vdig-supply = <&pm660_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				 &cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				 &cam_sensor_rear_suspend>;

		gpios = <&tlmm 32 0>,

			<&tlmm 46 0>,

			<&pm660l_gpios 4 0>,

			<&tlmm 51 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VDIG",

					"CAM_VANA";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss MCLK0_CLK_SRC>,

				<&clock_mmss MMSS_CAMSS_MCLK0_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <90>;

		qcom,actuator-src = <&actuator1>;

		qcom,eeprom-src = <&eeprom1>;

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&pm660l_bob>;

		cam_vdig-supply = <&pm660_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 34 0>,

			<&tlmm 48 0>,

			<&pm660l_gpios 3 0>,

			<&tlmm 51 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

					  "CAM_RESET",

					  "CAM_VDIG",

					  "CAM_VANA";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK2_CLK_SRC>,

			<&clock_mmss MMSS_CAMSS_MCLK2_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <90>;

		qcom,actuator-src = <&actuator2>;

		qcom,eeprom-src = <&eeprom2>;

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&pm660l_bob>;

		cam_vdig-supply = <&pm660_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 33 0>,

			<&tlmm 47 0>,

			<&pm660l_gpios 3 0>,

			<&tlmm 51 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VDIG",

					"CAM_VANA";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK1_CLK_SRC>,

			<&clock_mmss MMSS_CAMSS_MCLK1_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

};



&pm660l_gpios {

	gpio@c300 { /* GPIO4 -CAMERA SENSOR 0 VDIG*/

		qcom,mode = <1>;                /* Output */

		qcom,pull = <5>;                /* No Pull */

		qcom,vin-sel = <0>;             /* VIN1 GPIO_LV */

		qcom,src-sel = <0>;             /* GPIO */

		qcom,invert = <0>;              /* Invert */

		qcom,master-en = <1>;           /* Enable GPIO */

		status = "ok";

	};



	gpio@c200 { /* GPIO3 -CAMERA SENSOR 2 VDIG*/

		qcom,mode = <1>;                /* Output */

		qcom,pull = <5>;                /* No Pull */

		qcom,vin-sel = <0>;             /* VIN1 GPIO_LV */

		qcom,src-sel = <0>;             /* GPIO */

		qcom,invert = <0>;              /* Invert */

		qcom,master-en = <1>;           /* Enable GPIO */

		status = "ok";

	};

};