Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit af3d5096 authored by Linux Build Service Account's avatar Linux Build Service Account Committed by Gerrit - the friendly Code Review server
Browse files

Merge "ARM: dts: msm: Add support for JDI Dual DSI QHD cmd mode panel"

parents a8f33162 77ffba1b

arch/arm/boot/dts/qcom/apq8084-liquid.dtsi

+15 −0
Original line number Diff line number Diff line
@@ -143,6 +143,8 @@ 


#include "dsi-panel-jdi-dualmipi0-video.dtsi"

#include "dsi-panel-jdi-dualmipi1-video.dtsi"

#include "dsi-panel-jdi-dualmipi0-cmd.dtsi"

#include "dsi-panel-jdi-dualmipi1-cmd.dtsi"



&dsi_dual_jdi_video_0 {

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
@@ -156,6 +158,18 @@ 
	qcom,cont-splash-enabled;

};





&dsi_dual_jdi_cmd_0 {

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";

	qcom,mdss-dsi-bl-pmic-pwm-frequency = <50>;

	qcom,mdss-dsi-bl-pmic-bank-select = <2>;

	qcom,mdss-dsi-pwm-gpio = <&pma8084_gpios 7 0>;

};



&dsi_dual_jdi_cmd_1 {

};





&mdss_mdp {

	qcom,mdss-pref-prim-intf = "dsi";

};
@@ -172,6 +186,7 @@ 


&mdss_dsi0 {

	qcom,dsi-pref-prim-pan = <&dsi_dual_jdi_video_0>;

	qcom,platform-te-gpio = <&msmgpio 12 0>;

	qcom,platform-reset-gpio = <&msmgpio 96 0>;

	qcom,platform-enable-gpio = <&msmgpio 137 0>;

	qcom,platform-bklight-en-gpio = <&msmgpio 86 0>;

arch/arm/boot/dts/qcom/dsi-panel-jdi-dualmipi0-cmd.dtsi

0 → 100644
+91 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&mdss_mdp {

	dsi_dual_jdi_cmd_0: qcom,mdss_dsi_jdi_qhd_dualmipi0_cmd{

		qcom,mdss-dsi-panel-name = "Dual 0 cmd mode dsi panel";

		qcom,mdss-dsi-panel-controller = <&mdss_dsi0>;

		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";

		qcom,mdss-dsi-panel-destination = "display_1";

		qcom,mdss-dsi-panel-framerate = <60>;

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-panel-width = <1280>;

		qcom,mdss-dsi-panel-height = <1440>;

		qcom,mdss-dsi-h-front-porch = <120>;

		qcom,mdss-dsi-h-back-porch = <44>;

		qcom,mdss-dsi-h-pulse-width = <16>;

		qcom,mdss-dsi-h-sync-skew = <0>;

		qcom,mdss-dsi-v-back-porch = <4>;

		qcom,mdss-dsi-v-front-porch = <8>;

		qcom,mdss-dsi-v-pulse-width = <4>;

		qcom,mdss-dsi-h-left-border = <0>;

		qcom,mdss-dsi-h-right-border = <0>;

		qcom,mdss-dsi-v-top-border = <0>;

		qcom,mdss-dsi-v-bottom-border = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-color-order = "rgb_swap_rgb";

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-h-sync-pulse = <0>;

		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";

		qcom,mdss-dsi-lane-map = "lane_map_0123";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-panel-broadcast-mode;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-lane-3-state;

		qcom,mdss-dsi-panel-timings = [cd 32 22 00 60 64 26 34 29 03

									04 00];

		qcom,mdss-dsi-reset-sequence = <1 200>, <0 200>, <1 20>;

		qcom,mdss-dsi-t-clk-post = <0x03>;

		qcom,mdss-dsi-t-clk-pre = <0x27>;

		qcom,mdss-dsi-bl-max-level = <4095>;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-te-pin-select = <1>;

		qcom,mdss-dsi-te-v-sync-rd-ptr-irq-line = <0x2c>;

		qcom,mdss-dsi-te-v-sync-continues-lines = <0x3c>;

		qcom,mdss-dsi-te-dcs-command = <1>;

		qcom,mdss-dsi-te-check-enable;

		qcom,mdss-dsi-te-using-te-pin;

		qcom,mdss-dsi-on-command = [29 01 00 00 00 00 02 b0 03

			05 01 00 00 0a 00 01 00

			/* Soft reset, wait 10ms */

			15 01 00 00 0a 00 02 3a 77

			/* Set Pixel format (24 bpp) */

			39 01 00 00 0a 00 05 2a 00 00 04 ff

			/* Set Column address */

			39 01 00 00 0a 00 05 2b 00 00 05 9f

			/* Set page address */

			15 01 00 00 0a 00 02 35 00

			/* Set tear on */

			39 01 00 00 0a 00 03 44 00 00

			/* Set tear scan line */

			15 01 00 00 0a 00 02 51 ff

			/* write display brightness */

			15 01 00 00 0a 00 02 53 24

			 /* write control brightness */

			15 01 00 00 0a 00 02 55 00

			/* CABC brightness */

			05 01 00 00 78 00 01 11

			/* exit sleep mode, wait 120ms */

			05 01 00 00 10 00 01 29];

			/* Set display on, wait 16ms */

		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

		qcom,mdss-dsi-off-command = [05 01 00 00 32 00 02 28 00

					05 01 00 00 78 00 02 10 00];

		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

	};

};

arch/arm/boot/dts/qcom/dsi-panel-jdi-dualmipi1-cmd.dtsi

0 → 100644
+91 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&mdss_mdp {

	dsi_dual_jdi_cmd_1: qcom,mdss_dsi_jdi_qhd_dualmipi1_cmd{

		qcom,mdss-dsi-panel-name = "Dual 1 cmd mode dsi panel";

		qcom,mdss-dsi-panel-controller = <&mdss_dsi1>;

		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";

		qcom,mdss-dsi-panel-destination = "display_2";

		qcom,mdss-dsi-panel-framerate = <60>;

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-panel-width = <1280>;

		qcom,mdss-dsi-panel-height = <1440>;

		qcom,mdss-dsi-h-front-porch = <120>;

		qcom,mdss-dsi-h-back-porch = <44>;

		qcom,mdss-dsi-h-pulse-width = <16>;

		qcom,mdss-dsi-h-sync-skew = <0>;

		qcom,mdss-dsi-v-back-porch = <4>;

		qcom,mdss-dsi-v-front-porch = <8>;

		qcom,mdss-dsi-v-pulse-width = <4>;

		qcom,mdss-dsi-h-left-border = <0>;

		qcom,mdss-dsi-h-right-border = <0>;

		qcom,mdss-dsi-v-top-border = <0>;

		qcom,mdss-dsi-v-bottom-border = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-color-order = "rgb_swap_rgb";

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-h-sync-pulse = <0>;

		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";

		qcom,mdss-dsi-lane-map = "lane_map_0123";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-panel-broadcast-mode;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-lane-3-state;

		qcom,mdss-dsi-panel-timings = [cd 32 22 00 60 64 26 34 29 03

									04 00];

		qcom,mdss-dsi-reset-sequence = <1 20>, <0 200>, <1 20>;

		qcom,mdss-dsi-t-clk-post = <0x03>;

		qcom,mdss-dsi-t-clk-pre = <0x27>;

		qcom,mdss-dsi-bl-max-level = <4095>;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-te-pin-select = <1>;

		qcom,mdss-dsi-te-v-sync-rd-ptr-irq-line = <0x2c>;

		qcom,mdss-dsi-te-v-sync-continues-lines = <0x3c>;

		qcom,mdss-dsi-te-dcs-command = <1>;

		qcom,mdss-dsi-te-check-enable;

		qcom,mdss-dsi-te-using-te-pin;

		qcom,mdss-dsi-on-command = [29 01 00 00 00 00 02 b0 03

			05 01 00 00 0a 00 01 00

			/* Soft reset, wait 10ms */

			15 01 00 00 0a 00 02 3a 77

			/* Set Pixel format (24 bpp) */

			39 01 00 00 0a 00 05 2a 00 00 04 ff

			/* Set Column address */

			39 01 00 00 0a 00 05 2b 00 00 05 9f

			/* Set page address */

			15 01 00 00 0a 00 02 35 00

			/* Set tear on */

			39 01 00 00 0a 00 03 44 00 00

			/* Set tear scan line */

			15 01 00 00 0a 00 02 51 ff

			/* write display brightness */

			15 01 00 00 0a 00 02 53 24

			 /* write control brightness */

			15 01 00 00 0a 00 02 55 00

			/* CABC brightness */

			05 01 00 00 78 00 01 11

			/* exit sleep mode, wait 120ms */

			05 01 00 00 10 00 01 29];

			/* Set display on, wait 16ms */

		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

		qcom,mdss-dsi-off-command = [05 01 00 00 32 00 02 28 00

					05 01 00 00 78 00 02 10 00];

		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

	};

};