Merge "ARM: dts: msm: Add EMAC pin definitions for sdmshrike" (f7c185c2) · Commits · e / devices / android_kernel_oneplus_sm8150

arch/arm64/boot/dts/qcom/sdmshrike-pinctrl.dtsi

+218 −0

Original line number	Diff line number	Diff line
		@@ -2002,6 +2002,224 @@
		};
		};

		emac {
		emac_mdc: emac_mdc {
		mux {
		pins = "gpio7";
		function = "rgmii_mdc";
		};

		config {
		pins = "gpio7";
		bias-pull-up;
		};
		};
		emac_mdio: emac_mdio {
		mux {
		pins = "gpio59";
		function = "rgmii_mdio";
		};

		config {
		pins = "gpio59";
		bias-pull-up;
		};
		};

		emac_rgmii_txd0: emac_rgmii_txd0 {
		mux {
		pins = "gpio122";
		function = "rgmii_txd0";
		};

		config {
		pins = "gpio122";
		bias-pull-up;
		drive-strength = <16>;
		};
		};

		emac_rgmii_txd1: emac_rgmii_txd1 {
		mux {
		pins = "gpio4";
		function = "rgmii_txd1";
		};

		config {
		pins = "gpio4";
		bias-pull-up;
		drive-strength = <16>;
		};
		};

		emac_rgmii_txd2: emac_rgmii_txd2 {
		mux {
		pins = "gpio5";
		function = "rgmii_txd2";
		};

		config {
		pins = "gpio5";
		bias-pull-up;
		drive-strength = <16>;
		};
		};

		emac_rgmii_txd3: emac_rgmii_txd3 {
		mux {
		pins = "gpio6";
		function = "rgmii_txd3";
		};

		config {
		pins = "gpio6";
		bias-pull-up;
		drive-strength = <16>;
		};
		};

		emac_rgmii_txc: emac_rgmii_txc {
		mux {
		pins = "gpio114";
		function = "rgmii_txc";
		};

		config {
		pins = "gpio114";
		bias-pull-up;
		drive-strength = <16>;
		};
		};

		emac_rgmii_tx_ctl: emac_rgmii_tx_ctl {
		mux {
		pins = "gpio121";
		function = "rgmii_tx";
		};

		config {
		pins = "gpio121";
		bias-pull-up;
		drive-strength = <16>;
		};
		};

		emac_rgmii_rxd0: emac_rgmii_rxd0 {
		mux {
		pins = "gpio117";
		function = "rgmii_rxd0";
		};

		config {
		pins = "gpio117";
		bias-disable; /* NO pull */
		drive-strength = <2>; /* 2MA */
		};
		};

		emac_rgmii_rxd1: emac_rgmii_rxd1 {
		mux {
		pins = "gpio118";
		function = "rgmii_rxd1";
		};

		config {
		pins = "gpio118";
		bias-disable; /* NO pull */
		drive-strength = <2>;
		};
		};

		emac_rgmii_rxd2: emac_rgmii_rxd2 {
		mux {
		pins = "gpio119";
		function = "rgmii_rxd2";
		};

		config {
		pins = "gpio119";
		bias-disable; /* NO pull */
		drive-strength = <2>;
		};
		};

		emac_rgmii_rxd3: emac_rgmii_rxd3 {
		mux {
		pins = "gpio120";
		function = "rgmii_rxd3";
		};

		config {
		pins = "gpio120";
		bias-disable; /* NO pull */
		drive-strength = <2>;
		};
		};

		emac_rgmii_rxc: emac_rgmii_rxc {
		mux {
		pins = "gpio115";
		function = "rgmii_rxc";
		};

		config {
		pins = "gpio115";
		bias-disable; /* NO pull */
		drive-strength = <2>;
		};
		};

		emac_rgmii_rx_ctl: emac_rgmii_rx_ctl {
		mux {
		pins = "gpio116";
		function = "rgmii_rx";
		};

		config {
		pins = "gpio116";
		bias-disable; /* NO pull */
		drive-strength = <2>;
		};
		};

		emac_phy_intr: emac_phy_intr {
		mux {
		pins = "gpio124";
		function = "emac_phy";
		};
		config {
		pins = "gpio124";
		bias-disable; /* NO pull */
		drive-strength = <8>;
		};
		};

		emac_phy_reset_state: emac_phy_reset_state {
		mux {
		pins = "gpio79";
		function = "gpio";
		};
		config {
		pins = "gpio79";
		bias-pull-up;
		drive-strength = <16>;
		};
		};

		emac_pin_pps_0: emac_pin_pps_0 {
		mux {
		pins = "gpio81";
		function = "emac_pps";
		};

		config {
		pins = "gpio81";
		drive-strength = <8>; /* 8 mA */
		bias-disable; /* NO PULL*/
		};
		};
		};

		/* SE12 UART-2wire pin mappings */
		qupv3_se12_2uart_pins: qupv3_se12_2uart_pins {
		qupv3_se12_2uart_active: qupv3_se12_2uart_active {