ARM: dts: gemini: add pin control set-up for the SoC (f328c2ea) · Commits · e / devices / android_kernel_oneplus_sm8150

arch/arm/boot/dts/gemini-dlink-dir-685.dts

+55 −0

Original line number	Original line	Diff line number	Diff line
	@@ -32,6 +32,7 @@
	wakeup-source;		wakeup-source;
	linux,code = <KEY_ESC>;		linux,code = <KEY_ESC>;
	label = "reset";		label = "reset";
			/* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
	gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;		gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};		};
	button-eject {		button-eject {
	@@ -39,6 +40,7 @@
	wakeup-source;		wakeup-source;
	linux,code = <KEY_EJECTCD>;		linux,code = <KEY_EJECTCD>;
	label = "unmount";		label = "unmount";
			/* Collides with LPC LFRAME, UART RTS, SSP TXD */
	gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;		gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};		};
	};		};
	@@ -47,6 +49,7 @@
	compatible = "gpio-leds";		compatible = "gpio-leds";
	led-wps {		led-wps {
	label = "dir685:blue:WPS";		label = "dir685:blue:WPS";
			/* Collides with ICE */
	gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	default-state = "on";		default-state = "on";
	linux,default-trigger = "heartbeat";		linux,default-trigger = "heartbeat";
	@@ -61,11 +64,13 @@
	*/		*/
	led-blue-hd {		led-blue-hd {
	label = "dir685:blue:HD";		label = "dir685:blue:HD";
			/* Collides with LPC_SERIRQ, UART DTR, SSP FSC pins */
	gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;		gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	default-state = "off";		default-state = "off";
	};		};
	led-orange-hd {		led-orange-hd {
	label = "dir685:orange:HD";		label = "dir685:orange:HD";
			/* Collides with LPC_LAD[2], UART DSR, SSP ECLK pins */
	gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;		gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	default-state = "off";		default-state = "off";
	};		};
	@@ -81,6 +86,7 @@
	*/		*/
	gpio-fan {		gpio-fan {
	compatible = "gpio-fan";		compatible = "gpio-fan";
			/* Collides with IDE */
	gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;		gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
	gpio-fan,speed-map = <0 0>, <10000 1>;		gpio-fan,speed-map = <0 0>, <10000 1>;
	#cooling-cells = <2>;		#cooling-cells = <2>;
	@@ -92,6 +98,7 @@
	*/		*/
	gpio-i2c {		gpio-i2c {
	compatible = "i2c-gpio";		compatible = "i2c-gpio";
			/* Collides with ICE */
	gpios = <&gpio0 5 0>, /* SDA */		gpios = <&gpio0 5 0>, /* SDA */
	<&gpio0 6 0>; /* SCL */		<&gpio0 6 0>; /* SCL */
	#address-cells = <1>;		#address-cells = <1>;
	@@ -101,6 +108,7 @@
	compatible = "dlink,dir685-touchkeys";		compatible = "dlink,dir685-touchkeys";
	reg = <0x26>;		reg = <0x26>;
	interrupt-parent = <&gpio0>;		interrupt-parent = <&gpio0>;
			/* Collides with NAND flash */
	interrupts = <17 IRQ_TYPE_EDGE_FALLING>;		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
	};		};
	};		};
	@@ -156,12 +164,59 @@
	};		};
	};		};

			syscon: syscon@40000000 {
			pinctrl {
			/*
			* gpio0bgrp cover line 5, 6 used by TK I2C
			* gpio0bgrp cover line 7 used by WPS LED
			* gpio0cgrp cover line 8, 13 used by keys
			* and 11, 12 used by the HD LEDs
			* gpio0egrp cover line 16 used by VDISP
			* gpio0fgrp cover line 17 used by TK IRQ
			* gpio0ggrp cover line 20 used by panel CS
			* gpio0hgrp cover line 21,22 used by RTL8366RB
			*/
			gpio0_default_pins: pinctrl-gpio0 {
			mux {
			function = "gpio0";
			groups = "gpio0bgrp",
			"gpio0cgrp",
			"gpio0egrp",
			"gpio0fgrp",
			"gpio0ggrp",
			"gpio0hgrp";
			};
			};
			/*
			* gpio1bgrp cover line 5,8,7 used by panel SPI
			* also line 6 used by the fan
			*
			*/
			gpio1_default_pins: pinctrl-gpio1 {
			mux {
			function = "gpio1";
			groups = "gpio1bgrp";
			};
			};
			};
			};

	sata: sata@46000000 {		sata: sata@46000000 {
	cortina,gemini-ata-muxmode = <0>;		cortina,gemini-ata-muxmode = <0>;
	cortina,gemini-enable-sata-bridge;		cortina,gemini-enable-sata-bridge;
	status = "okay";		status = "okay";
	};		};

			gpio0: gpio@4d000000 {
			pinctrl-names = "default";
			pinctrl-0 = <&gpio0_default_pins>;
			};

			gpio1: gpio@4e000000 {
			pinctrl-names = "default";
			pinctrl-0 = <&gpio1_default_pins>;
			};

	pci@50000000 {		pci@50000000 {
	status = "okay";		status = "okay";
	interrupt-map-mask = <0xf800 0 0 7>;		interrupt-map-mask = <0xf800 0 0 7>;

arch/arm/boot/dts/gemini-nas4220b.dts

+24 −0

Original line number	Original line	Diff line number	Diff line
	@@ -33,6 +33,7 @@
	wakeup-source;		wakeup-source;
	linux,code = <KEY_SETUP>;		linux,code = <KEY_SETUP>;
	label = "Backup button";		label = "Backup button";
			/* Conflict with TVC */
	gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;		gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
	};		};
	button@31 {		button@31 {
	@@ -40,6 +41,7 @@
	wakeup-source;		wakeup-source;
	linux,code = <KEY_RESTART>;		linux,code = <KEY_RESTART>;
	label = "Softreset button";		label = "Softreset button";
			/* Conflict with TVC */
	gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;		gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
	};		};
	};		};
	@@ -48,11 +50,13 @@
	compatible = "gpio-leds";		compatible = "gpio-leds";
	led@28 {		led@28 {
	label = "nas4220b:orange:hdd";		label = "nas4220b:orange:hdd";
			/* Conflict with TVC */
	gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;		gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
	default-state = "on";		default-state = "on";
	};		};
	led@30 {		led@30 {
	label = "nas4220b:green:os";		label = "nas4220b:green:os";
			/* Conflict with TVC */
	gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;		gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
	default-state = "on";		default-state = "on";
	linux,default-trigger = "heartbeat";		linux,default-trigger = "heartbeat";
	@@ -99,12 +103,32 @@
	};		};
	};		};

			syscon: syscon@40000000 {
			pinctrl {
			/*
			* gpio1dgrp cover line 28-31 otherwise used
			* by TVC.
			*/
			gpio1_default_pins: pinctrl-gpio1 {
			mux {
			function = "gpio1";
			groups = "gpio1dgrp";
			};
			};
			};
			};

	sata: sata@46000000 {		sata: sata@46000000 {
	cortina,gemini-ata-muxmode = <0>;		cortina,gemini-ata-muxmode = <0>;
	cortina,gemini-enable-sata-bridge;		cortina,gemini-enable-sata-bridge;
	status = "okay";		status = "okay";
	};		};

			gpio1: gpio@4e000000 {
			pinctrl-names = "default";
			pinctrl-0 = <&gpio1_default_pins>;
			};

	ata@63000000 {		ata@63000000 {
	status = "okay";		status = "okay";
	};		};

arch/arm/boot/dts/gemini-rut1xx.dts

+39 −0

Original line number	Original line	Diff line number	Diff line
	@@ -33,6 +33,7 @@
	wakeup-source;		wakeup-source;
	linux,code = <KEY_SETUP>;		linux,code = <KEY_SETUP>;
	label = "Reset to defaults";		label = "Reset to defaults";
			/* Conflict with TVC */
	gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
	};		};
	};		};
	@@ -42,12 +43,14 @@
	led@7 {		led@7 {
	/* FIXME: add the LED color */		/* FIXME: add the LED color */
	label = "rut1xx::gsm";		label = "rut1xx::gsm";
			/* Conflict with ICE */
	gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	default-state = "on";		default-state = "on";
	};		};
	led@31 {		led@31 {
	/* FIXME: add the LED color */		/* FIXME: add the LED color */
	label = "rut1xx::power";		label = "rut1xx::power";
			/* Conflict with NAND CE0 */
	gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
	default-state = "off";		default-state = "off";
	linux,default-trigger = "heartbeat";		linux,default-trigger = "heartbeat";
	@@ -61,5 +64,41 @@
	reg = <0x30000000 0x00800000>;		reg = <0x30000000 0x00800000>;
	/* TODO: add flash partitions here */		/* TODO: add flash partitions here */
	};		};

			syscon: syscon@40000000 {
			pinctrl {
			/*
			* gpio0bgrp cover line 7 used by GSM LED
			* gpio0fgrp cover line 17 used by power LED
			*/
			gpio0_default_pins: pinctrl-gpio0 {
			mux {
			function = "gpio0";
			groups = "gpio0bgrp",
			"gpio0fgrp";
			};
			};
			/*
			* gpio1dgrp cover line 28-31 otherwise used
			* by TVC.
			*/
			gpio1_default_pins: pinctrl-gpio1 {
			mux {
			function = "gpio1";
			groups = "gpio1dgrp";
			};
			};
			};
			};

			gpio0: gpio@4d000000 {
			pinctrl-names = "default";
			pinctrl-0 = <&gpio0_default_pins>;
			};

			gpio1: gpio@4e000000 {
			pinctrl-names = "default";
			pinctrl-0 = <&gpio1_default_pins>;
			};
	};		};
	};		};

arch/arm/boot/dts/gemini-sq201.dts

+35 −1

Original line number	Original line	Diff line number	Diff line
	@@ -33,6 +33,7 @@
	wakeup-source;		wakeup-source;
	linux,code = <KEY_SETUP>;		linux,code = <KEY_SETUP>;
	label = "factory reset";		label = "factory reset";
			/* Conflict with NAND flash */
	gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;		gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	};		};
	};		};
	@@ -41,12 +42,14 @@
	compatible = "gpio-leds";		compatible = "gpio-leds";
	led@20 {		led@20 {
	label = "sq201:green:info";		label = "sq201:green:info";
			/* Conflict with parallel flash */
	gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;		gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
	default-state = "on";		default-state = "on";
	linux,default-trigger = "heartbeat";		linux,default-trigger = "heartbeat";
	};		};
	led@31 {		led@31 {
	label = "sq201:green:usb";		label = "sq201:green:usb";
			/* Conflict with parallel and NAND flash */
	gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
	default-state = "off";		default-state = "off";
	linux,default-trigger = "usb-host";		linux,default-trigger = "usb-host";
	@@ -55,7 +58,15 @@

	soc {		soc {
	flash@30000000 {		flash@30000000 {
	status = "okay";		/*
			* Flash access can be enabled, with the side effect
			* of disabling access to GPIO LED on GPIO0[20] which
			* reuse one of the parallel flash chip select lines.
			* Also the default firmware on the machine has the
			* problem that since it uses the flash, the two LEDS
			* on the right become numb.
			*/
			/* status = "okay"; */
	/* 16MB of flash */		/* 16MB of flash */
	reg = <0x30000000 0x01000000>;		reg = <0x30000000 0x01000000>;

	@@ -93,12 +104,35 @@
	};		};
	};		};

			syscon: syscon@40000000 {
			pinctrl {
			/*
			* gpio0fgrp cover line 18 used by reset button
			* gpio0ggrp cover line 20 used by info LED
			* gpio0kgrp cover line 31 used by USB LED
			*/
			gpio0_default_pins: pinctrl-gpio0 {
			mux {
			function = "gpio0";
			groups = "gpio0fgrp",
			"gpio0ggrp",
			"gpio0kgrp";
			};
			};
			};
			};

	sata: sata@46000000 {		sata: sata@46000000 {
	cortina,gemini-ata-muxmode = <0>;		cortina,gemini-ata-muxmode = <0>;
	cortina,gemini-enable-sata-bridge;		cortina,gemini-enable-sata-bridge;
	status = "okay";		status = "okay";
	};		};

			gpio0: gpio@4d000000 {
			pinctrl-names = "default";
			pinctrl-0 = <&gpio0_default_pins>;
			};

	pci@50000000 {		pci@50000000 {
	status = "okay";		status = "okay";
	interrupt-map-mask = <0xf800 0 0 7>;		interrupt-map-mask = <0xf800 0 0 7>;

arch/arm/boot/dts/gemini-wbd111.dts

+26 −0

Original line number	Original line	Diff line number	Diff line
	@@ -33,6 +33,7 @@
	wakeup-source;		wakeup-source;
	linux,code = <KEY_SETUP>;		linux,code = <KEY_SETUP>;
	label = "reset";		label = "reset";
			/* Conflict with ICE */
	gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;		gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	};		};
	};		};
	@@ -42,21 +43,25 @@

	led@1 {		led@1 {
	label = "wbd111:red:L3";		label = "wbd111:red:L3";
			/* Conflict with TVC and extended parallel flash */
	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;		gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	default-state = "off";		default-state = "off";
	};		};
	led@2 {		led@2 {
	label = "wbd111:green:L4";		label = "wbd111:green:L4";
			/* Conflict with TVC and extended parallel flash */
	gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;		gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	default-state = "off";		default-state = "off";
	};		};
	led@3 {		led@3 {
	label = "wbd111:red:L4";		label = "wbd111:red:L4";
			/* Conflict with TVC and extended parallel flash */
	gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;		gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
	default-state = "off";		default-state = "off";
	};		};
	led@5 {		led@5 {
	label = "wbd111:green:L3";		label = "wbd111:green:L3";
			/* Conflict with TVC and extended parallel flash */
	gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;		gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
	default-state = "on";		default-state = "on";
	linux,default-trigger = "heartbeat";		linux,default-trigger = "heartbeat";
	@@ -98,5 +103,26 @@
	read-only;		read-only;
	};		};
	};		};

			syscon: syscon@40000000 {
			pinctrl {
			/*
			* gpio0agrp cover line 0-4
			* gpio0bgrp cover line 5
			*/
			gpio0_default_pins: pinctrl-gpio0 {
			mux {
			function = "gpio0";
			groups = "gpio0agrp",
			"gpio0bgrp";
			};
			};
			};
			};

			gpio0: gpio@4d000000 {
			pinctrl-names = "default";
			pinctrl-0 = <&gpio0_default_pins>;
			};
	};		};
	};		};