Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit af8bf611 authored by Shankar Ravi's avatar Shankar Ravi
Browse files

ARM: dts: msm: Add EERPOM,FLASH for camera nodes for sm6150 



Add EEPROM and FLASH for new camera nodes.

Change-Id: I0bcd2d147127c0468c2ef65e8272cc0a1114599d
Signed-off-by: default avatarShankar Ravi <rshankar@codeaurora.org>
parent 88aefb67

arch/arm64/boot/dts/qcom/sdmmagpie-camera-sensor-idp.dtsi

+41 −2
Original line number Original line Diff line number Diff line
@@ -178,6 +178,43 @@ 
		clock-rates = <24000000>;

		clock-rates = <24000000>;

	};

	};





	eeprom_triple_rear_aux: qcom,eeprom@3 {

		cell-index = <3>;

		reg = <0x3>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l6>;

		cam_vdig-supply = <&pm8009_l4>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&pm8009_s2>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1200000 0 2900000>;

		rgltr-max-voltage = <1800000 2800000 1200000 0 2900000>;

		rgltr-load-current = <0 80000 105000 0 100000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				&cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				&cam_sensor_rear2_suspend>;

		gpios = <&tlmm 14 0>,

			<&pm8009_gpios 2 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1";

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@0 {

	qcom,cam-sensor@0 {

		cell-index = <0>;

		cell-index = <0>;

		compatible = "qcom,cam-sensor";

		compatible = "qcom,cam-sensor";
@@ -400,7 +437,7 @@ 
		sensor-position-pitch = <0>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		sensor-position-yaw = <180>;

		led-flash-src = <&led_flash_rear_aux>;

		led-flash-src = <&led_flash_rear_aux>;

		eeprom-src = <&eeprom_rear>;

		eeprom-src = <&eeprom_triple_rear_aux>;

		actuator-src = <&actuator_rear>;

		actuator-src = <&actuator_rear>;

		cam_vio-supply = <&pm8009_l7>;

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l6>;

		cam_vana-supply = <&pm8009_l6>;
@@ -442,8 +479,10 @@ 
		sensor-position-roll = <270>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		sensor-position-yaw = <0>;

		actuator-src = <&actuator_rear_aux>;

		cam_vio-supply = <&pm8009_l7>;

		cam_vio-supply = <&pm8009_l7>;

		eeprom-src = <&eeprom_front>;

		led-flash-src = <&led_flash_rear_aux>;

		actuator-src = <&actuator_rear_aux>;

		cam_vana-supply = <&pm8009_l6>;

		cam_vana-supply = <&pm8009_l6>;

		cam_vdig-supply = <&pm8009_l2>;

		cam_vdig-supply = <&pm8009_l2>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_clk-supply = <&titan_top_gdsc>;