Merge "ARM: dts: msm: Add new nodes for tele and ultra wide camera for sm6150"... (88aefb67) · Commits · e / devices / android_kernel_oneplus_sm8150

arch/arm64/boot/dts/qcom/sdmmagpie-camera-sensor-idp.dtsi

+87 −3

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2018, The Linux Foundation. All rights reserved.
		* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		@@ -267,7 +267,7 @@
		qcom,cam-sensor@2 {
		cell-index = <2>;
		compatible = "qcom,cam-sensor";
		reg = <0x02>;
		reg = <0x2>;
		csiphy-sd-index = <2>;
		sensor-position-roll = <270>;
		sensor-position-pitch = <0>;
		@@ -351,7 +351,7 @@
		qcom,cam-sensor@4 {
		cell-index = <4>;
		compatible = "qcom,cam-sensor";
		reg = <0x04>;
		reg = <0x4>;
		csiphy-sd-index = <0>;
		sensor-position-roll = <90>;
		sensor-position-pitch = <0>;
		@@ -390,6 +390,90 @@
		clock-cntl-level = "turbo";
		clock-rates = <24000000>;
		};

		qcom,cam-sensor@5 {
		cell-index = <5>;
		compatible = "qcom,cam-sensor";
		reg = <0x5>;
		csiphy-sd-index = <1>;
		sensor-position-roll = <90>;
		sensor-position-pitch = <0>;
		sensor-position-yaw = <180>;
		led-flash-src = <&led_flash_rear_aux>;
		eeprom-src = <&eeprom_rear>;
		actuator-src = <&actuator_rear>;
		cam_vio-supply = <&pm8009_l7>;
		cam_vana-supply = <&pm8009_l6>;
		cam_vdig-supply = <&pm8009_l4>;
		cam_clk-supply = <&titan_top_gdsc>;
		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
		"cam_clk";
		rgltr-cntrl-support;
		rgltr-min-voltage = <1800000 2800000 1200000 0>;
		rgltr-max-voltage = <1800000 2800000 1200000 0>;
		rgltr-load-current = <0 80000 105000 0>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk1_active
		&cam_sensor_rear2_active>;
		pinctrl-1 = <&cam_sensor_mclk1_suspend
		&cam_sensor_rear2_suspend>;
		gpios = <&tlmm 14 0>,
		<&pm8009_gpios 2 0>;
		gpio-reset = <1>;
		gpio-req-tbl-num = <0 1>;
		gpio-req-tbl-flags = <1 0>;
		gpio-req-tbl-label = "CAMIF_MCLK1",
		"CAM_RESET1";
		sensor-mode = <0>;
		cci-master = <0>;
		status = "ok";
		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "turbo";
		clock-rates = <24000000>;
		};

		qcom,cam-sensor@6 {
		cell-index = <6>;
		compatible = "qcom,cam-sensor";
		reg = <0x6>;
		csiphy-sd-index = <2>;
		sensor-position-roll = <270>;
		sensor-position-pitch = <0>;
		sensor-position-yaw = <0>;
		actuator-src = <&actuator_rear_aux>;
		cam_vio-supply = <&pm8009_l7>;
		cam_vana-supply = <&pm8009_l6>;
		cam_vdig-supply = <&pm8009_l2>;
		cam_clk-supply = <&titan_top_gdsc>;
		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
		"cam_clk";
		rgltr-cntrl-support;
		rgltr-min-voltage = <1800000 2800000 1050000 0>;
		rgltr-max-voltage = <1800000 2800000 1050000 0>;
		rgltr-load-current = <0 80000 105000 0>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk2_active
		&cam_sensor_front_active>;
		pinctrl-1 = <&cam_sensor_mclk2_suspend
		&cam_sensor_front_suspend>;
		gpios = <&tlmm 15 0>,
		<&pm8009_gpios 4 0>;
		gpio-reset = <1>;
		gpio-req-tbl-num = <0 1>;
		gpio-req-tbl-flags = <1 0>;
		gpio-req-tbl-label = "CAMIF_MCLK2",
		"CAM_RESET2";
		sensor-mode = <0>;
		cci-master = <1>;
		status = "ok";
		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "turbo";
		clock-rates = <24000000>;
		};
		};