Merge "ARM: dts: msm: add hd sim command display panel for SM8150 target" (7b5b77c6) · Commits · e / devices / android_kernel_oneplus_sm8150

arch/arm64/boot/dts/qcom/dsi-panel-sim-sec-hd-cmd.dtsi

0 → 100644

+75 −0

Original line number	Diff line number	Diff line
		/* Copyright (c) 2017-2018 The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		&mdss_mdp {
		dsi_sim_sec_hd_cmd: qcom,mdss_dsi_sim_sec_hd_cmd {
		qcom,mdss-dsi-panel-name =
		"sim hd command mode secondary dsi panel";
		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
		qcom,mdss-dsi-virtual-channel-id = <0>;
		qcom,mdss-dsi-stream = <0>;
		qcom,mdss-dsi-bpp = <24>;
		qcom,mdss-dsi-underflow-color = <0xff>;
		qcom,mdss-dsi-border-color = <0>;
		qcom,mdss-dsi-traffic-mode = "burst_mode";
		qcom,panel-ack-disabled;
		qcom,mdss-dsi-te-using-wd;
		qcom,mdss-dsi-te-pin-select = <1>;
		qcom,mdss-dsi-te-dcs-command = <1>;
		qcom,mdss-dsi-te-check-enable;
		qcom,mdss-dsi-te-using-te-pin;
		qcom,mdss-dsi-bllp-eof-power-mode;
		qcom,mdss-dsi-bllp-power-mode;
		qcom,mdss-dsi-lane-0-state;
		qcom,mdss-dsi-lane-1-state;
		qcom,mdss-dsi-lane-2-state;
		qcom,mdss-dsi-lane-3-state;
		qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>;
		qcom,mdss-dsi-tx-eot-append;
		qcom,mdss-dsi-post-init-delay = <1>;
		qcom,mdss-dsi-dma-trigger = "trigger_sw";
		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-display-timings {
		timing@0{
		qcom,mdss-dsi-panel-width = <720>;
		qcom,mdss-dsi-panel-height = <1280>;
		qcom,mdss-dsi-h-front-porch = <120>;
		qcom,mdss-dsi-h-back-porch = <60>;
		qcom,mdss-dsi-h-pulse-width = <12>;
		qcom,mdss-dsi-h-sync-skew = <0>;
		qcom,mdss-dsi-v-back-porch = <2>;
		qcom,mdss-dsi-v-front-porch = <12>;
		qcom,mdss-dsi-v-pulse-width = <2>;
		qcom,mdss-dsi-h-sync-pulse = <0>;
		qcom,mdss-dsi-h-left-border = <0>;
		qcom,mdss-dsi-h-right-border = <0>;
		qcom,mdss-dsi-v-top-border = <0>;
		qcom,mdss-dsi-v-bottom-border = <0>;
		qcom,mdss-dsi-panel-framerate = <60>;

		qcom,mdss-dsi-on-command = [
		/* sleep out + delay 120ms */
		05 01 00 00 78 00 01 11
		/* display on + delay 120ms */
		05 01 00 00 78 00 01 29
		];
		qcom,mdss-dsi-off-command = [
		05 01 00 00 78 00 02 28 00
		05 01 00 00 78 00 02 10 00
		];
		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
		};
		};
		};
		};

arch/arm64/boot/dts/qcom/sm8150-cdp.dtsi

+13 −0

Original line number	Diff line number	Diff line
		@@ -236,6 +236,19 @@
		qcom,platform-sec-reset-gpio = <&tlmm 66 0>;
		};

		&dsi_sim_sec_hd_cmd {
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply_vdd_no_labibb>;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
		qcom,panel-mode-gpio = <&tlmm 7 0>;
		qcom,platform-reset-gpio = <&tlmm 6 0>;
		qcom,panel-sec-mode-gpio = <&tlmm 77 0>;
		qcom,platform-sec-reset-gpio = <&tlmm 66 0>;
		};

		&dsi_nt35695b_truly_fhd_video {
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply_vdd_no_labibb>;

arch/arm64/boot/dts/qcom/sm8150-mtp.dtsi

+13 −0

Original line number	Diff line number	Diff line
		@@ -149,6 +149,19 @@
		qcom,platform-reset-gpio = <&tlmm 6 0>;
		};

		&dsi_sim_sec_hd_cmd {
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply_vdd_no_labibb>;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
		qcom,panel-mode-gpio = <&tlmm 7 0>;
		qcom,platform-reset-gpio = <&tlmm 6 0>;
		qcom,panel-sec-mode-gpio = <&tlmm 77 0>;
		qcom,platform-sec-reset-gpio = <&tlmm 66 0>;
		};

		&dsi_dual_nt35597_truly_video {
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";

arch/arm64/boot/dts/qcom/sm8150-sde-display.dtsi

+29 −1

Original line number	Diff line number	Diff line
		@@ -16,6 +16,7 @@
		#include "dsi-panel-sim-dualmipi-video.dtsi"
		#include "dsi-panel-sim-dualmipi-cmd.dtsi"
		#include "dsi-panel-sim-dualmipi-dsc375-cmd.dtsi"
		#include "dsi-panel-sim-sec-hd-cmd.dtsi"
		#include "dsi-panel-sharp-dsc-4k-video.dtsi"
		#include "dsi-panel-sharp-dsc-4k-cmd.dtsi"
		#include "dsi-panel-nt35597-truly-dualmipi-wqxga-video.dtsi"
		@@ -380,6 +381,18 @@
		qcom,dsi-panel = <&dsi_nt35695b_truly_fhd_video>;
		};

		dsi_sim_sec_hd_cmd_display: qcom,dsi-display@22 {

		label = "dsi_sim_sec_hd_cmd_display";
		qcom,display-type = "secondary";

		qcom,dsi-ctrl-num = <1>;
		qcom,dsi-phy-num = <1>;
		qcom,dsi-select-clocks = "src_byte_clk1", "src_pixel_clk1";

		qcom,dsi-panel = <&dsi_sim_sec_hd_cmd>;
		};

		sde_dsi: qcom,dsi-display-primary {
		compatible = "qcom,dsi-display";
		label = "primary";
		@@ -457,7 +470,8 @@

		qcom,dsi-display-list =
		<&dsi_nt35695b_truly_fhd_cmd_sec_display
		&dsi_nt35695b_truly_fhd_video_sec_display>;
		&dsi_nt35695b_truly_fhd_video_sec_display
		&dsi_sim_sec_hd_cmd_display>;
		};

		sde_wb: qcom,wb-display@0 {
		@@ -646,6 +660,20 @@
		};
		};

		&dsi_sim_sec_hd_cmd {
		qcom,ulps-enabled;
		qcom,mdss-dsi-display-timings {
		timing@0 {
		qcom,mdss-dsi-panel-phy-timings = [00 1e 08 07 24 22
		08 08 05 02 04 00 19 17];
		qcom,display-topology = <1 0 1>;
		qcom,default-topology-index = <0>;
		qcom,panel-roi-alignment = <720 40 720 40 720 40>;
		qcom,partial-update-enabled = "single_roi";
		};
		};
		};

		&dsi_dual_sharp_1080_120hz_cmd {
		qcom,mdss-dsi-display-timings {
		timing@0{