Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 21dc221d authored by Prabhanjan Kandula's avatar Prabhanjan Kandula
Browse files

ARM: dts: msm: add hd sim command display panel for SM8150 target 



Change adds HD resolution sim command panel support for secondary
DSI with partial update capability for SM8150 target.

Change-Id: I6cc5ad4f59dccebe29102e60461583edaf31a440
Signed-off-by: default avatarPrabhanjan Kandula <pkandula@codeaurora.org>
parent ed540a20

arch/arm64/boot/dts/qcom/dsi-panel-sim-sec-hd-cmd.dtsi

0 → 100644
+75 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2017-2018 The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&mdss_mdp {

	dsi_sim_sec_hd_cmd: qcom,mdss_dsi_sim_sec_hd_cmd {

		qcom,mdss-dsi-panel-name =

				"sim hd command mode secondary dsi panel";

		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-traffic-mode = "burst_mode";

		qcom,panel-ack-disabled;

		qcom,mdss-dsi-te-using-wd;

		qcom,mdss-dsi-te-pin-select = <1>;

		qcom,mdss-dsi-te-dcs-command = <1>;

		qcom,mdss-dsi-te-check-enable;

		qcom,mdss-dsi-te-using-te-pin;

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-lane-3-state;

		qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>;

		qcom,mdss-dsi-tx-eot-append;

		qcom,mdss-dsi-post-init-delay = <1>;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";



		qcom,mdss-dsi-display-timings {

			timing@0{

				qcom,mdss-dsi-panel-width = <720>;

				qcom,mdss-dsi-panel-height = <1280>;

				qcom,mdss-dsi-h-front-porch = <120>;

				qcom,mdss-dsi-h-back-porch = <60>;

				qcom,mdss-dsi-h-pulse-width = <12>;

				qcom,mdss-dsi-h-sync-skew = <0>;

				qcom,mdss-dsi-v-back-porch = <2>;

				qcom,mdss-dsi-v-front-porch = <12>;

				qcom,mdss-dsi-v-pulse-width = <2>;

				qcom,mdss-dsi-h-sync-pulse = <0>;

				qcom,mdss-dsi-h-left-border = <0>;

				qcom,mdss-dsi-h-right-border = <0>;

				qcom,mdss-dsi-v-top-border = <0>;

				qcom,mdss-dsi-v-bottom-border = <0>;

				qcom,mdss-dsi-panel-framerate = <60>;



				qcom,mdss-dsi-on-command = [

					/* sleep out + delay 120ms */

					05 01 00 00 78 00 01 11

					/* display on + delay 120ms */

					05 01 00 00 78 00 01 29

					];

				qcom,mdss-dsi-off-command = [

					05 01 00 00 78 00 02 28 00

					05 01 00 00 78 00 02 10 00

					];

				qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

				qcom,mdss-dsi-off-command-state = "dsi_lp_mode";

			};

		};

	};

};

arch/arm64/boot/dts/qcom/sm8150-cdp.dtsi

+13 −0
Original line number Diff line number Diff line
@@ -236,6 +236,19 @@ 
	qcom,platform-sec-reset-gpio = <&tlmm 66 0>;

};



&dsi_sim_sec_hd_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;

	qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply_vdd_no_labibb>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <4095>;

	qcom,mdss-dsi-mode-sel-gpio-state = "single_port";

	qcom,panel-mode-gpio = <&tlmm 7 0>;

	qcom,platform-reset-gpio = <&tlmm 6 0>;

	qcom,panel-sec-mode-gpio = <&tlmm 77 0>;

	qcom,platform-sec-reset-gpio = <&tlmm 66 0>;

};



&dsi_nt35695b_truly_fhd_video {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;

	qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply_vdd_no_labibb>;

arch/arm64/boot/dts/qcom/sm8150-mtp.dtsi

+13 −0
Original line number Diff line number Diff line
@@ -149,6 +149,19 @@ 
	qcom,platform-reset-gpio = <&tlmm 6 0>;

};



&dsi_sim_sec_hd_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;

	qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply_vdd_no_labibb>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <4095>;

	qcom,mdss-dsi-mode-sel-gpio-state = "single_port";

	qcom,panel-mode-gpio = <&tlmm 7 0>;

	qcom,platform-reset-gpio = <&tlmm 6 0>;

	qcom,panel-sec-mode-gpio = <&tlmm 77 0>;

	qcom,platform-sec-reset-gpio = <&tlmm 66 0>;

};



&dsi_dual_nt35597_truly_video {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";

arch/arm64/boot/dts/qcom/sm8150-sde-display.dtsi

+29 −1
Original line number Diff line number Diff line
@@ -16,6 +16,7 @@ 
#include "dsi-panel-sim-dualmipi-video.dtsi"

#include "dsi-panel-sim-dualmipi-cmd.dtsi"

#include "dsi-panel-sim-dualmipi-dsc375-cmd.dtsi"

#include "dsi-panel-sim-sec-hd-cmd.dtsi"

#include "dsi-panel-sharp-dsc-4k-video.dtsi"

#include "dsi-panel-sharp-dsc-4k-cmd.dtsi"

#include "dsi-panel-nt35597-truly-dualmipi-wqxga-video.dtsi"
@@ -380,6 +381,18 @@ 
		qcom,dsi-panel = <&dsi_nt35695b_truly_fhd_video>;

	};



	dsi_sim_sec_hd_cmd_display: qcom,dsi-display@22 {



		label = "dsi_sim_sec_hd_cmd_display";

		qcom,display-type = "secondary";



		qcom,dsi-ctrl-num = <1>;

		qcom,dsi-phy-num = <1>;

		qcom,dsi-select-clocks = "src_byte_clk1", "src_pixel_clk1";



		qcom,dsi-panel = <&dsi_sim_sec_hd_cmd>;

	};



	sde_dsi: qcom,dsi-display-primary {

		compatible = "qcom,dsi-display";

		label = "primary";
@@ -457,7 +470,8 @@ 


		qcom,dsi-display-list =

			<&dsi_nt35695b_truly_fhd_cmd_sec_display

			&dsi_nt35695b_truly_fhd_video_sec_display>;

			&dsi_nt35695b_truly_fhd_video_sec_display

			&dsi_sim_sec_hd_cmd_display>;

	};



	sde_wb: qcom,wb-display@0 {
@@ -646,6 +660,20 @@ 
	};

};



&dsi_sim_sec_hd_cmd {

	qcom,ulps-enabled;

	qcom,mdss-dsi-display-timings {

		timing@0 {

			qcom,mdss-dsi-panel-phy-timings = [00 1e 08 07 24 22

				08 08 05 02 04 00 19 17];

			qcom,display-topology = <1 0 1>;

			qcom,default-topology-index = <0>;

			qcom,panel-roi-alignment = <720 40 720 40 720 40>;

			qcom,partial-update-enabled = "single_roi";

		};

	};

};



&dsi_dual_sharp_1080_120hz_cmd {

	qcom,mdss-dsi-display-timings {

		timing@0{