Merge commit '4c9c1149' into dev/msm-4.14-display

* commit '4c9c1149':
  Indicate support for reporting rx FCS error rate
  msm: dts: changing GPIO pins for auto camera
  usb: gadget: f_serial: Use snprintf() instead of sprintf()
  ARM: dts: msm: Add audio support for the SA8195P target.
  ARM: dts: msm: Add display port pin definitions for sdmshrike
  msm: ipa: Added check to detect iova range collision
  soc: qcom: dfc: Ignore grants after powersave
  slimbus: Re-organize the mutex lock for reconfigure_now api
  msm: ipa: Update wdi3 channel scratch variable
  ARM: dts: msm: Populate serial peripheral bus devices for sdmshrike
  ARM: dts: msm: update quat tdm port number on sa8155 platform
  rmnet: Add rmnet_shs freq traces
  ARM: dts: msm: configure IPA MPM carved iova range
  ARM: dts: msm: Add EMAC pin definitions for sdmshrike
  clk: qcom: Add clock measure support for qpic clock for sdxprairie
  clk: qcom: clk-rpmh: Add clk measure support for QPIC clock
  clk: qcom: cmn-pll: Add new clock ops for prepare/unprepare
  ARM: dts: msm: Update QoS priority for arm9 master for TRINKET
  msm: ipa: Enable USB RNDIS to Rmnet switch
  msm: camera : Lock Implementation for avoid race condition
  diag: Prevent out-of-bound access while processing userspace data
  ARM: dts: msm: update latfloor node mapping for trinket target
  net: qrtr: Add pm_wakeup_event() support
  ARM: dts: msm: rearrange PCIe interrupts for sdxprairie
  ARM: dts: msm: update PCIe1 PHY settings to v1.08 for sm8150 v2
  ARM: dts: msm: update node properties for sa8155 auto
  ARM: dts: msm: define labels for nodes in sm8150 dt
  ARM: dts: msm: Add camera sensor DT file for QCS610
  msm: ipa: Validate USB teth protocol switches
  msm: kgsl: Call dma_buf_unmap_attachment() early
  Revert "msm: ipa: Update IPA SRAM mapping"
  ARM: dts: msm: Add LT9611 support for QCS610
  cnss2: Expose PCIe DRV connection status
  ARM: dts: msm: Add PCIe pin definitions for sdmshrike
  ARM: dts: msm: Add gpu-pwrlevels for SA8155
  msm: ADSPRPC: Reject I/O requests during audio PDR
  arch_topology: Update cpu core sibling mask at topology initialization
  msm: ipa: ipa_tx_dp issued after suspend
  diag: Check buffer size against command structure size
  qseecom: improve app_block_wq processing
  Revert "input: touchscreen: st: turn off regulator during suspend"
  defconfig: msm: enable DRM hyp driver for quin gvm
  defconfig: msm: enable vidc_v4l2 driver for quin gvm
  defconfig: msm: enable configs for quin gvm
  ARM: dts: msm: Add separate dts for sa8155 lv gvm
  msm: ipa: Update IPA SRAM mapping
  clk: qcom: Assign pll config to video/disp/camcc/gpu/ssc pll
  clk: qcom: clk-alpha: Reconfigure Trion/Regera PLL during enable
  ARM: dts: add pinctrl for quat/quin tdm on sa6155 auto platform
  msm: ipa3: fix the init_modem_req logic
  ARM: dts: msm: update quat tdm port number on sa8155 platform
  ARM: dts: msm: Add audio interrupt pin definition for sdmshrike
  msm: npu: Add MSM_NPU_SET_PROP API to set npu driver/fw property
  msm: ipa3: add check to load gsi fw once
  ARM: dts: add quat/quin slpi pinctrl info on sm6150 platform
  msm: ais: Fix camera start failure
  msm: ais: ignore remain apply request id for pause
  ARM: dts: msm: Enable rmt_storage for atoll
  usb: dwc3: gadget: Avoid use-after-free of stale requests
  ARM: dts: msm: update dcvs nodes for LPDDR3 on trinket target
  devfreq: detect ddr type and add frequency table accordingly
  drivers: iio: adc: Add support for suspend to disk
  drm/msm/sde: Move output select to cdm core
  msm: ipa: IPA driver changes for H/w fnr stats
  serial: msm_geni_serial: Align to HW assisted flow control support
  diag: Validate command length against size of command structure
  usb: pd: Avoid double queue of usbpd_sm work
  clk: handle reentrant clk_set_rate() calls from clock supply regulators
  msm: ipa: Replenish buffer once only in ipa3_rx_poll
  msm: gsi: Avoid ring event ring door bell for empty ieob
  msm: ipa: Use tasklet instead of WQ for write done
  msm: kgsl: Omit referencing pointers in traces
  msm: kgsl: Fix drawqueue timer race condition
  defconfig: msm: Enable llcc edac for sdmshrike
  ARM: dts: msm: Include lpm related device nodes for sdmshrike
  defconfig: msm: Enable kryo edac for sdmshrike
  msm: gsi: Avoid unnessary write to ipa
  dfc: Fix dead lock in dfc_svc_init
  ARM: msm: dts: enable DSI on QCS610 IOT target
  diag: Prevent out-of-bound access while processing stm cmd
  ARM: dts: msm: Add regulator cooling device for SDMSHRIKE
  ARM: dts: msm: Add LMH-DCVSh configuration for SDMSHRIKE
  ARM: dts: msm: Add tpdm lpass for sdmmagpie
  drivers: thermal: virtual-sensor: Add new gpu virtual sensor for SDMSHRIKE
  msm: ipa3: Fix to correct mem allocated flag
  ARM: dts: msm: Add thermal zone configuration for SDMSHRIKE
  i2c: qcom: geni: Add support for suspend to disk
  msm: kgsl: Correctly identify faulting UCHE client
  thermal: qcom-spmi-temp-alarm: Add support for suspend to disk
  msm: mhi_dev: Check DTR and RTS signals sent by host
  diag: Prevent out-of-bound access while processing dci transaction
  coresight: tgu: Correct the check of timer_refcnt
  cnss2: Check PCIe link status for each address access
  ARM: dts: msm: add QUAT TDM node for auto vm platform
  msm: kgsl: Ignore rgmu disable GDSC error
  diag: Prevent out-of-bound access while processing mask commands
  serial: msm_geni_serial: Add support for s2d feature
  ARM: dts: msm: Fix Rotation issue UW camera for sdmmagpie
  drivers: net: qti-can: Add qTimer support in driver
  defconfig: Enable LT9611 drvier for QCS610
  diag: Free the buffer for failed entry addition to buf table
  devfreq: add support for different ddr types
  diag: Add support to receive dci traffic from multiple devices
  diag: dci: Validate dci response length before parsing
  usb: dwc3: Fix use after free crash from dwc3 interrupt handler
  soc: qcom: secure_buffer: Process large SG tables in batches
  ARM: dts: msm: Correct default pinctrl state for sm8150 HSUART
  msm: camera: Unmap secure buffers in secure camera use case
  defconfig: msm: Enable CONFIG_HID_SONY for Trinket
  uapi: sound: add new meta key to get DSP render position
  ARM: dts: msm: Update the bus master and slave ids
  msm: camera_v2: Remove sysfs bind/unbind files
  ARM: dts: msm: Fix Tert and Sec TDM configuration for SA8155-VM
  dcc_v2: Check enable status of dcc when changing curr_list
  regulator: qpnp-amoled: Allow configure VREG_OK poll time in AOD entry
  dt-bindings: qpnp-amoled: Allow configure VREG_OK poll time in AOD entry
  msm: ipa4: add IPA_PC node vote after uC loaded
  msm: ipa: Unvote pcie clock for USB disconnect
  msm: ipa: MHI Prime channels clean up
  drm/msm/sde: Enable source buffer logging
  power: smb1390: add support to disable smb1390 based on SOC
  msm: ipa3: Print NAT entries as kernel logs
  msm: camera: reqmgr: Get the index difference properly
  msm: camera_v2: isp: handle frame drop in error case
  clk: qcom: ssc: Add odd postdiv table for aux pll on SA6155
  diag: Prevent out-of-bound access while processing non-hdlc pkt
  ARM: dts: msm: Flash support for UW camera for sdmmagpie
  ARM64: dts: Disabling EMAC for RCMs
  msm: ipa3: Return -ENOMEM on memory allocation failure
  ARM: dts: msm: Update bus efficiency factor for TRINKET
  clk: qcom: Add support for 384MHz and 400MHz for display clock for TRINKET
  defconfig: msm: Enable CONFIG_HID_SONY for Android Q CTS suite
  msm: camera: core: release ref after config failed
  ARM: dts: msm: Update llcc edac to use polling mode
  Revert "msm: ipa: Update IPA SRAM mapping"
  Revert "msm: ipa: Consolidate LE MBB and LE MHI cases"
  defconfig: msm: enable minidump for sa8155
  msm: ipa: adjust the aggregation params on WLAN path
  msm: ipa3: Assert the device when IPA FW not loaded
  diag: Clear memory device entries during mhi disconnect
  drivers: iio: imu: qtimer for asm330
  ARM: dts: msm: qtimer for asm330 sensor
  diag: dci: Add missing length check before parsing the buffer
  msm: camera: icp: icp debug improvement
  i2c-msm-v2: Replace HW recovery mechanism with SW bit-banging
  cpufreq: schedutil: Add fast switch to sugov_limits path
  Revert "msm: camera: isp: Handle early PCR for all pipelines"
  diag: Check command size against the minimum before parsing
  diag: Prevent out of bound access while getting build mask
  msm: camera: isp: clearing isp context entries for rdi_only_context
  ARM: dts: msm: Update GPU snapshot size
  ARM: dts: msm: Update the LDOs max voltage limit for QCS610
  usb: dwc3-msm: Fix NULL pointer dereference in gsi_ring_db
  power: smb1390: Allow taper exit if increase in float voltage
  usb: pd: Don't wait to send outgoing requests in PE_SRC/SNK_READY
  defconfig: Enable FTRACE configs on SDXPRAIRIE target
  ARM: dts: msm: qtimer for qti-can driver
  usb: dwc3: Prevent use after free of dwc_ipc_log_ctx
  msm: camera: Fix to address clock voting through debugfs
  msm: camera: Additional information to ICP page fault handler
  msm: camera: sensor: Delete request even if apply failed
  diag: Properly reallocate dci cmd response buffer
  usb: gadget: Avoid NULL pointer dereference during OS descriptors handling
  msm: camera: sensor: Use vzalloc to alloc reg setting memory
  qseecom: use wait_event_interruptible
  msm: vidc: Add common Boot KPI marker
  msm: kgsl: Avoid register write miss for a fenced register
  scsi: ufs: add new bit field PA_INIT to UECDL register
  USB: f_fs: Fix disconnect check during ongoing IO
  USB: f_fs: Fix epfile crash during composition switch
  usb: f_gsi: Add error checking for PREPARE_TRBS and STARTXFER ops
  usb: f_gsi: Avoid starting transfer if disconnected

Change-Id: I0b9936eede124165bddcc9ea33ca9430836de9eb
Signed-off-by: Abhijith Desai <desaia@codeaurora.org>