Loading arch/arm64/boot/dts/qcom/sa6155-adp-air.dtsi +4 −3 Original line number Diff line number Diff line Loading @@ -11,7 +11,11 @@ */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/qcom,gcc-sm6150.h> #include "sa6155-cnss.dtsi" &bluetooth_ext { status = "ok"; }; &qupv3_se6_spi { status = "ok"; Loading Loading @@ -120,9 +124,6 @@ }; }; bluetooth_ext: bt_qca6174 { status = "ok"; }; }; &ufsphy_mem { Loading arch/arm64/boot/dts/qcom/sa6155-adp-star.dtsi +4 −3 Original line number Diff line number Diff line Loading @@ -11,7 +11,11 @@ */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/qcom,gcc-sm6150.h> #include "sa6155-cnss.dtsi" &bluetooth_ext { status = "ok"; }; &qupv3_se6_spi { status = "ok"; Loading Loading @@ -120,9 +124,6 @@ }; }; bluetooth_ext: bt_qca6174 { status = "ok"; }; }; &ufsphy_mem { Loading arch/arm64/boot/dts/qcom/sa6155-cnss.dtsi 0 → 100644 +223 −0 Original line number Diff line number Diff line /* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ &soc { /* PWR_CTR1_VDD_1P8 supply */ vreg_conn_1p8: vreg_conn_1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_conn_1p8"; startup-delay-us = <4000>; enable-active-high; gpio = <&pm6155_1_gpios 1 0>; }; /* PWR_CTR2_VDD_PA supply */ vreg_conn_pa: vreg_conn_pa { compatible = "regulator-fixed"; regulator-name = "vreg_conn_pa"; startup-delay-us = <4000>; enable-active-high; gpio = <&pm6155_1_gpios 6 0>; }; vreg_wlan: vreg_wlan { compatible = "qcom,stub-regulator"; regulator-name = "vreg_wlan"; }; bluetooth_ext: bt_qca6174 { compatible = "qca,qca6174"; /* BT_EN */ pinctrl-names = "default"; pinctrl-0 = <&bt_en_active>; qca,bt-reset-gpio = <&tlmm 85 0>; /* PWR_CTR1_VDD_PA */ qca,bt-vdd-pa-supply = <&vreg_conn_pa>; qca,bt-chip-pwd-supply = <&vreg_conn_1p8>; qca,bt-vdd-vm-supply = <&pm6155_1_s6>; qca,bt-vdd-5a-supply = <&pm6155_1_s5>; qca,bt-vdd-vh-supply = <&pm6155_1_l15>; qca,bt-vdd-vm-voltage-level = <1370000 1370000>; qca,bt-vdd-5a-voltage-level = <2040000 2040000>; qca,bt-vdd-vh-voltage-level = <1904000 1904000>; qca,bt-vdd-vm-current-level = <0>; qca,bt-vdd-5a-current-level = <0>; qca,bt-vdd-vh-current-level = <450000>; status = "disabled"; }; cnss_pcie: qcom,cnss-qca-converged { compatible = "qcom,cnss-qca-converged"; qcom,converged-dt; qcom,wlan-rc-num = <0>; qcom,bus-type=<0>; qcom,notify-modem-status; qcom,msm-bus,name = "msm-cnss"; qcom,msm-bus,num-cases = <4>; qcom,msm-bus,num-paths = <2>; qcom,msm-bus,vectors-KBps = <45 512 0 0>, <1 512 0 0>, /* Upto 200 Mbps */ <45 512 41421 655360>, <1 512 41421 655360>, /* Upto 400 Mbps */ <45 512 98572 655360>, <1 512 98572 1600000>, /* Upto 800 Mbps */ <45 512 207108 1146880>, <1 512 207108 3124992>; #address-cells=<1>; #size-cells=<1>; ranges = <0x10000000 0x10000000 0x10000000>, <0x20000000 0x20000000 0x10000>, <0xa0000000 0xa0000000 0x10000000>, <0xb0000000 0xb0000000 0x10000>; vdd-wlan-ctrl1-supply = <&vreg_conn_pa>; vdd-wlan-ctrl2-supply = <&vreg_conn_1p8>; vdd-wlan-supply = <&vreg_wlan>; vdd-wlan-rfa1-supply = <&pm6155_1_s6>; vdd-wlan-rfa2-supply = <&pm6155_1_s5>; vdd-wlan-rfa3-supply = <&pm6155_1_l15>; wlan_vregs = "vdd-wlan-ctrl1", "vdd-wlan-ctrl2"; qcom,vdd-wlan-ctrl1-info = <0 0 0 0>; qcom,vdd-wlan-ctrl2-info = <0 0 0 0>; wlan-en-gpio = <&tlmm 98 0>; pinctrl-names = "wlan_en_active", "wlan_en_sleep"; pinctrl-0 = <&cnss_wlan_en_active>; pinctrl-1 = <&cnss_wlan_en_sleep>; chip_cfg@0 { reg = <0x10000000 0x10000000>, <0x20000000 0x10000>; reg-names = "smmu_iova_base", "smmu_iova_ipa"; supported-ids = <0x003e>; wlan_vregs = "vdd-wlan"; qcom,vdd-wlan-info = <0 0 0 10>; qcom,smmu-s1-enable; qcom,wlan-ramdump-dynamic = <0x200000>; }; chip_cfg@1 { reg = <0xa0000000 0x10000000>, <0xb0000000 0x10000>; reg-names = "smmu_iova_base", "smmu_iova_ipa"; supported-ids = <0x1101>; wlan_vregs = "vdd-wlan-rfa1", "vdd-wlan-rfa2", "vdd-wlan-rfa3"; qcom,vdd-wlan-rfa1-info = <1350000 1350000 0 0>; qcom,vdd-wlan-rfa2-info = <2040000 2040000 0 0>; qcom,vdd-wlan-rfa3-info = <1904000 1904000 0 0>; qcom,wlan-ramdump-dynamic = <0x400000>; mhi,max-channels = <30>; mhi,timeout = <10000>; mhi_channels { mhi_chan@0 { reg = <0>; label = "LOOPBACK"; mhi,num-elements = <32>; mhi,event-ring = <1>; mhi,chan-dir = <1>; mhi,data-type = <0>; mhi,doorbell-mode = <2>; mhi,ee = <0x14>; }; mhi_chan@1 { reg = <1>; label = "LOOPBACK"; mhi,num-elements = <32>; mhi,event-ring = <1>; mhi,chan-dir = <2>; mhi,data-type = <0>; mhi,doorbell-mode = <2>; mhi,ee = <0x14>; }; mhi_chan@4 { reg = <4>; label = "DIAG"; mhi,num-elements = <32>; mhi,event-ring = <1>; mhi,chan-dir = <1>; mhi,data-type = <0>; mhi,doorbell-mode = <2>; mhi,ee = <0x14>; }; mhi_chan@5 { reg = <5>; label = "DIAG"; mhi,num-elements = <32>; mhi,event-ring = <1>; mhi,chan-dir = <2>; mhi,data-type = <0>; mhi,doorbell-mode = <2>; mhi,ee = <0x14>; }; mhi_chan@20 { reg = <20>; label = "IPCR"; mhi,num-elements = <32>; mhi,event-ring = <1>; mhi,chan-dir = <1>; mhi,data-type = <1>; mhi,doorbell-mode = <2>; mhi,ee = <0x14>; mhi,auto-start; }; mhi_chan@21 { reg = <21>; label = "IPCR"; mhi,num-elements = <32>; mhi,event-ring = <1>; mhi,chan-dir = <2>; mhi,data-type = <0>; mhi,doorbell-mode = <2>; mhi,ee = <0x14>; mhi,auto-queue; mhi,auto-start; }; }; mhi_events { mhi_event@0 { mhi,num-elements = <32>; mhi,intmod = <1>; mhi,msi = <1>; mhi,priority = <1>; mhi,brstmode = <2>; mhi,data-type = <1>; }; mhi_event@1 { mhi,num-elements = <256>; mhi,intmod = <1>; mhi,msi = <2>; mhi,priority = <1>; mhi,brstmode = <2>; }; }; }; }; }; arch/arm64/boot/dts/qcom/sa6155-regulator.dtsi +0 −23 Original line number Diff line number Diff line Loading @@ -533,28 +533,5 @@ qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; }; }; /* PWR_CTR1_VDD_1P8 supply */ vreg_conn_1p8: vreg_conn_1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_conn_1p8"; startup-delay-us = <4000>; enable-active-high; gpio = <&pm6155_1_gpios 1 0>; }; /* PWR_CTR2_VDD_PA supply */ vreg_conn_pa: vreg_conn_pa { compatible = "regulator-fixed"; regulator-name = "vreg_conn_pa"; startup-delay-us = <4000>; enable-active-high; gpio = <&pm6155_1_gpios 6 0>; }; vreg_wlan: vreg_wlan { compatible = "qcom,stub-regulator"; regulator-name = "vreg_wlan"; }; }; arch/arm64/boot/dts/qcom/sa6155.dts +2 −1 Original line number Diff line number Diff line /* Copyright (c) 2018, The Linux Foundation. All rights reserved. /* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and Loading @@ -13,6 +13,7 @@ /dts-v1/; #include "sa6155.dtsi" #include "sa6155-cnss.dtsi" / { model = "Qualcomm Technologies, Inc. SA6155 SoC"; Loading Loading
arch/arm64/boot/dts/qcom/sa6155-adp-air.dtsi +4 −3 Original line number Diff line number Diff line Loading @@ -11,7 +11,11 @@ */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/qcom,gcc-sm6150.h> #include "sa6155-cnss.dtsi" &bluetooth_ext { status = "ok"; }; &qupv3_se6_spi { status = "ok"; Loading Loading @@ -120,9 +124,6 @@ }; }; bluetooth_ext: bt_qca6174 { status = "ok"; }; }; &ufsphy_mem { Loading
arch/arm64/boot/dts/qcom/sa6155-adp-star.dtsi +4 −3 Original line number Diff line number Diff line Loading @@ -11,7 +11,11 @@ */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/qcom,gcc-sm6150.h> #include "sa6155-cnss.dtsi" &bluetooth_ext { status = "ok"; }; &qupv3_se6_spi { status = "ok"; Loading Loading @@ -120,9 +124,6 @@ }; }; bluetooth_ext: bt_qca6174 { status = "ok"; }; }; &ufsphy_mem { Loading
arch/arm64/boot/dts/qcom/sa6155-cnss.dtsi 0 → 100644 +223 −0 Original line number Diff line number Diff line /* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ &soc { /* PWR_CTR1_VDD_1P8 supply */ vreg_conn_1p8: vreg_conn_1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_conn_1p8"; startup-delay-us = <4000>; enable-active-high; gpio = <&pm6155_1_gpios 1 0>; }; /* PWR_CTR2_VDD_PA supply */ vreg_conn_pa: vreg_conn_pa { compatible = "regulator-fixed"; regulator-name = "vreg_conn_pa"; startup-delay-us = <4000>; enable-active-high; gpio = <&pm6155_1_gpios 6 0>; }; vreg_wlan: vreg_wlan { compatible = "qcom,stub-regulator"; regulator-name = "vreg_wlan"; }; bluetooth_ext: bt_qca6174 { compatible = "qca,qca6174"; /* BT_EN */ pinctrl-names = "default"; pinctrl-0 = <&bt_en_active>; qca,bt-reset-gpio = <&tlmm 85 0>; /* PWR_CTR1_VDD_PA */ qca,bt-vdd-pa-supply = <&vreg_conn_pa>; qca,bt-chip-pwd-supply = <&vreg_conn_1p8>; qca,bt-vdd-vm-supply = <&pm6155_1_s6>; qca,bt-vdd-5a-supply = <&pm6155_1_s5>; qca,bt-vdd-vh-supply = <&pm6155_1_l15>; qca,bt-vdd-vm-voltage-level = <1370000 1370000>; qca,bt-vdd-5a-voltage-level = <2040000 2040000>; qca,bt-vdd-vh-voltage-level = <1904000 1904000>; qca,bt-vdd-vm-current-level = <0>; qca,bt-vdd-5a-current-level = <0>; qca,bt-vdd-vh-current-level = <450000>; status = "disabled"; }; cnss_pcie: qcom,cnss-qca-converged { compatible = "qcom,cnss-qca-converged"; qcom,converged-dt; qcom,wlan-rc-num = <0>; qcom,bus-type=<0>; qcom,notify-modem-status; qcom,msm-bus,name = "msm-cnss"; qcom,msm-bus,num-cases = <4>; qcom,msm-bus,num-paths = <2>; qcom,msm-bus,vectors-KBps = <45 512 0 0>, <1 512 0 0>, /* Upto 200 Mbps */ <45 512 41421 655360>, <1 512 41421 655360>, /* Upto 400 Mbps */ <45 512 98572 655360>, <1 512 98572 1600000>, /* Upto 800 Mbps */ <45 512 207108 1146880>, <1 512 207108 3124992>; #address-cells=<1>; #size-cells=<1>; ranges = <0x10000000 0x10000000 0x10000000>, <0x20000000 0x20000000 0x10000>, <0xa0000000 0xa0000000 0x10000000>, <0xb0000000 0xb0000000 0x10000>; vdd-wlan-ctrl1-supply = <&vreg_conn_pa>; vdd-wlan-ctrl2-supply = <&vreg_conn_1p8>; vdd-wlan-supply = <&vreg_wlan>; vdd-wlan-rfa1-supply = <&pm6155_1_s6>; vdd-wlan-rfa2-supply = <&pm6155_1_s5>; vdd-wlan-rfa3-supply = <&pm6155_1_l15>; wlan_vregs = "vdd-wlan-ctrl1", "vdd-wlan-ctrl2"; qcom,vdd-wlan-ctrl1-info = <0 0 0 0>; qcom,vdd-wlan-ctrl2-info = <0 0 0 0>; wlan-en-gpio = <&tlmm 98 0>; pinctrl-names = "wlan_en_active", "wlan_en_sleep"; pinctrl-0 = <&cnss_wlan_en_active>; pinctrl-1 = <&cnss_wlan_en_sleep>; chip_cfg@0 { reg = <0x10000000 0x10000000>, <0x20000000 0x10000>; reg-names = "smmu_iova_base", "smmu_iova_ipa"; supported-ids = <0x003e>; wlan_vregs = "vdd-wlan"; qcom,vdd-wlan-info = <0 0 0 10>; qcom,smmu-s1-enable; qcom,wlan-ramdump-dynamic = <0x200000>; }; chip_cfg@1 { reg = <0xa0000000 0x10000000>, <0xb0000000 0x10000>; reg-names = "smmu_iova_base", "smmu_iova_ipa"; supported-ids = <0x1101>; wlan_vregs = "vdd-wlan-rfa1", "vdd-wlan-rfa2", "vdd-wlan-rfa3"; qcom,vdd-wlan-rfa1-info = <1350000 1350000 0 0>; qcom,vdd-wlan-rfa2-info = <2040000 2040000 0 0>; qcom,vdd-wlan-rfa3-info = <1904000 1904000 0 0>; qcom,wlan-ramdump-dynamic = <0x400000>; mhi,max-channels = <30>; mhi,timeout = <10000>; mhi_channels { mhi_chan@0 { reg = <0>; label = "LOOPBACK"; mhi,num-elements = <32>; mhi,event-ring = <1>; mhi,chan-dir = <1>; mhi,data-type = <0>; mhi,doorbell-mode = <2>; mhi,ee = <0x14>; }; mhi_chan@1 { reg = <1>; label = "LOOPBACK"; mhi,num-elements = <32>; mhi,event-ring = <1>; mhi,chan-dir = <2>; mhi,data-type = <0>; mhi,doorbell-mode = <2>; mhi,ee = <0x14>; }; mhi_chan@4 { reg = <4>; label = "DIAG"; mhi,num-elements = <32>; mhi,event-ring = <1>; mhi,chan-dir = <1>; mhi,data-type = <0>; mhi,doorbell-mode = <2>; mhi,ee = <0x14>; }; mhi_chan@5 { reg = <5>; label = "DIAG"; mhi,num-elements = <32>; mhi,event-ring = <1>; mhi,chan-dir = <2>; mhi,data-type = <0>; mhi,doorbell-mode = <2>; mhi,ee = <0x14>; }; mhi_chan@20 { reg = <20>; label = "IPCR"; mhi,num-elements = <32>; mhi,event-ring = <1>; mhi,chan-dir = <1>; mhi,data-type = <1>; mhi,doorbell-mode = <2>; mhi,ee = <0x14>; mhi,auto-start; }; mhi_chan@21 { reg = <21>; label = "IPCR"; mhi,num-elements = <32>; mhi,event-ring = <1>; mhi,chan-dir = <2>; mhi,data-type = <0>; mhi,doorbell-mode = <2>; mhi,ee = <0x14>; mhi,auto-queue; mhi,auto-start; }; }; mhi_events { mhi_event@0 { mhi,num-elements = <32>; mhi,intmod = <1>; mhi,msi = <1>; mhi,priority = <1>; mhi,brstmode = <2>; mhi,data-type = <1>; }; mhi_event@1 { mhi,num-elements = <256>; mhi,intmod = <1>; mhi,msi = <2>; mhi,priority = <1>; mhi,brstmode = <2>; }; }; }; }; };
arch/arm64/boot/dts/qcom/sa6155-regulator.dtsi +0 −23 Original line number Diff line number Diff line Loading @@ -533,28 +533,5 @@ qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; }; }; /* PWR_CTR1_VDD_1P8 supply */ vreg_conn_1p8: vreg_conn_1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_conn_1p8"; startup-delay-us = <4000>; enable-active-high; gpio = <&pm6155_1_gpios 1 0>; }; /* PWR_CTR2_VDD_PA supply */ vreg_conn_pa: vreg_conn_pa { compatible = "regulator-fixed"; regulator-name = "vreg_conn_pa"; startup-delay-us = <4000>; enable-active-high; gpio = <&pm6155_1_gpios 6 0>; }; vreg_wlan: vreg_wlan { compatible = "qcom,stub-regulator"; regulator-name = "vreg_wlan"; }; };
arch/arm64/boot/dts/qcom/sa6155.dts +2 −1 Original line number Diff line number Diff line /* Copyright (c) 2018, The Linux Foundation. All rights reserved. /* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and Loading @@ -13,6 +13,7 @@ /dts-v1/; #include "sa6155.dtsi" #include "sa6155-cnss.dtsi" / { model = "Qualcomm Technologies, Inc. SA6155 SoC"; Loading