Merge branch 'drm-tda998x-devel' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next (1dd6eb88) · Commits · e / devices / android_kernel_oneplus_sm7250

Documentation/devicetree/bindings/display/bridge/tda998x.txt

+3 −0

Original line number	Diff line number	Diff line
		@@ -27,6 +27,9 @@ Optional properties:
		in question is used. The implementation allows one or two DAIs. If two
		DAIs are defined, they must be of different type.

		- nxp,calib-gpios: calibration GPIO, which must correspond with the
		gpio used for the TDA998x interrupt pin.

		[1] Documentation/sound/alsa/soc/DAI.txt
		[2] include/dt-bindings/display/tda998x.h

drivers/gpu/drm/i2c/Kconfig

+6 −0

Original line number	Diff line number	Diff line
		@@ -22,8 +22,14 @@ config DRM_I2C_SIL164
		config DRM_I2C_NXP_TDA998X
		tristate "NXP Semiconductors TDA998X HDMI encoder"
		default m if DRM_TILCDC
		select CEC_CORE if CEC_NOTIFIER
		select SND_SOC_HDMI_CODEC if SND_SOC
		help
		Support for NXP Semiconductors TDA998X HDMI encoders.

		config DRM_I2C_NXP_TDA9950
		tristate "NXP Semiconductors TDA9950/TDA998X HDMI CEC"
		select CEC_NOTIFIER
		select CEC_CORE

		endmenu

drivers/gpu/drm/i2c/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -7,3 +7,4 @@ obj-$(CONFIG_DRM_I2C_SIL164) += sil164.o

		tda998x-y := tda998x_drv.o
		obj-$(CONFIG_DRM_I2C_NXP_TDA998X) += tda998x.o
		obj-$(CONFIG_DRM_I2C_NXP_TDA9950) += tda9950.o

drivers/gpu/drm/i2c/tda9950.c

0 → 100644

+509 −0

Original line number	Diff line number	Diff line
		/*
		* TDA9950 Consumer Electronics Control driver
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 as
		* published by the Free Software Foundation.
		*
		* The NXP TDA9950 implements the HDMI Consumer Electronics Control
		* interface. The host interface is similar to a mailbox: the data
		* registers starting at REG_CDR0 are written to send a command to the
		* internal CPU, and replies are read from these registers.
		*
		* As the data registers represent a mailbox, they must be accessed
		* as a single I2C transaction. See the TDA9950 data sheet for details.
		*/
		#include <linux/delay.h>
		#include <linux/i2c.h>
		#include <linux/interrupt.h>
		#include <linux/module.h>
		#include <linux/platform_data/tda9950.h>
		#include <linux/slab.h>
		#include <drm/drm_edid.h>
		#include <media/cec.h>
		#include <media/cec-notifier.h>

		enum {
		REG_CSR = 0x00,
		CSR_BUSY = BIT(7),
		CSR_INT = BIT(6),
		CSR_ERR = BIT(5),

		REG_CER = 0x01,

		REG_CVR = 0x02,

		REG_CCR = 0x03,
		CCR_RESET = BIT(7),
		CCR_ON = BIT(6),

		REG_ACKH = 0x04,
		REG_ACKL = 0x05,

		REG_CCONR = 0x06,
		CCONR_ENABLE_ERROR = BIT(4),
		CCONR_RETRY_MASK = 7,

		REG_CDR0 = 0x07,

		CDR1_REQ = 0x00,
		CDR1_CNF = 0x01,
		CDR1_IND = 0x81,
		CDR1_ERR = 0x82,
		CDR1_IER = 0x83,

		CDR2_CNF_SUCCESS = 0x00,
		CDR2_CNF_OFF_STATE = 0x80,
		CDR2_CNF_BAD_REQ = 0x81,
		CDR2_CNF_CEC_ACCESS = 0x82,
		CDR2_CNF_ARB_ERROR = 0x83,
		CDR2_CNF_BAD_TIMING = 0x84,
		CDR2_CNF_NACK_ADDR = 0x85,
		CDR2_CNF_NACK_DATA = 0x86,
		};

		struct tda9950_priv {
		struct i2c_client *client;
		struct device *hdmi;
		struct cec_adapter *adap;
		struct tda9950_glue *glue;
		u16 addresses;
		struct cec_msg rx_msg;
		struct cec_notifier *notify;
		bool open;
		};

		static int tda9950_write_range(struct i2c_client client, u8 addr, u8 p, int cnt)
		{
		struct i2c_msg msg;
		u8 buf[cnt + 1];
		int ret;

		buf[0] = addr;
		memcpy(buf + 1, p, cnt);

		msg.addr = client->addr;
		msg.flags = 0;
		msg.len = cnt + 1;
		msg.buf = buf;

		dev_dbg(&client->dev, "wr 0x%02x: %*ph\n", addr, cnt, p);

		ret = i2c_transfer(client->adapter, &msg, 1);
		if (ret < 0)
		dev_err(&client->dev, "Error %d writing to cec:0x%x\n", ret, addr);
		return ret < 0 ? ret : 0;
		}

		static void tda9950_write(struct i2c_client *client, u8 addr, u8 val)
		{
		tda9950_write_range(client, addr, &val, 1);
		}

		static int tda9950_read_range(struct i2c_client client, u8 addr, u8 p, int cnt)
		{
		struct i2c_msg msg[2];
		int ret;

		msg[0].addr = client->addr;
		msg[0].flags = 0;
		msg[0].len = 1;
		msg[0].buf = &addr;
		msg[1].addr = client->addr;
		msg[1].flags = I2C_M_RD;
		msg[1].len = cnt;
		msg[1].buf = p;

		ret = i2c_transfer(client->adapter, msg, 2);
		if (ret < 0)
		dev_err(&client->dev, "Error %d reading from cec:0x%x\n", ret, addr);

		dev_dbg(&client->dev, "rd 0x%02x: %*ph\n", addr, cnt, p);

		return ret;
		}

		static u8 tda9950_read(struct i2c_client *client, u8 addr)
		{
		int ret;
		u8 val;

		ret = tda9950_read_range(client, addr, &val, 1);
		if (ret < 0)
		val = 0;

		return val;
		}

		static irqreturn_t tda9950_irq(int irq, void *data)
		{
		struct tda9950_priv *priv = data;
		unsigned int tx_status;
		u8 csr, cconr, buf[19];
		u8 arb_lost_cnt, nack_cnt, err_cnt;

		if (!priv->open)
		return IRQ_NONE;

		csr = tda9950_read(priv->client, REG_CSR);
		if (!(csr & CSR_INT))
		return IRQ_NONE;

		cconr = tda9950_read(priv->client, REG_CCONR) & CCONR_RETRY_MASK;

		tda9950_read_range(priv->client, REG_CDR0, buf, sizeof(buf));

		/*
		* This should never happen: the data sheet says that there will
		* always be a valid message if the interrupt line is asserted.
		*/
		if (buf[0] == 0) {
		dev_warn(&priv->client->dev, "interrupt pending, but no message?\n");
		return IRQ_NONE;
		}

		switch (buf[1]) {
		case CDR1_CNF: /* transmit result */
		arb_lost_cnt = nack_cnt = err_cnt = 0;
		switch (buf[2]) {
		case CDR2_CNF_SUCCESS:
		tx_status = CEC_TX_STATUS_OK;
		break;

		case CDR2_CNF_ARB_ERROR:
		tx_status = CEC_TX_STATUS_ARB_LOST;
		arb_lost_cnt = cconr;
		break;

		case CDR2_CNF_NACK_ADDR:
		tx_status = CEC_TX_STATUS_NACK;
		nack_cnt = cconr;
		break;

		default: /* some other error, refer to TDA9950 docs */
		dev_err(&priv->client->dev, "CNF reply error 0x%02x\n",
		buf[2]);
		tx_status = CEC_TX_STATUS_ERROR;
		err_cnt = cconr;
		break;
		}
		/* TDA9950 executes all retries for us */
		tx_status \|= CEC_TX_STATUS_MAX_RETRIES;
		cec_transmit_done(priv->adap, tx_status, arb_lost_cnt,
		nack_cnt, 0, err_cnt);
		break;

		case CDR1_IND:
		priv->rx_msg.len = buf[0] - 2;
		if (priv->rx_msg.len > CEC_MAX_MSG_SIZE)
		priv->rx_msg.len = CEC_MAX_MSG_SIZE;

		memcpy(priv->rx_msg.msg, buf + 2, priv->rx_msg.len);
		cec_received_msg(priv->adap, &priv->rx_msg);
		break;

		default: /* unknown */
		dev_err(&priv->client->dev, "unknown service id 0x%02x\n",
		buf[1]);
		break;
		}

		return IRQ_HANDLED;
		}

		static int tda9950_cec_transmit(struct cec_adapter *adap, u8 attempts,
		u32 signal_free_time, struct cec_msg *msg)
		{
		struct tda9950_priv *priv = adap->priv;
		u8 buf[CEC_MAX_MSG_SIZE + 2];

		buf[0] = 2 + msg->len;
		buf[1] = CDR1_REQ;
		memcpy(buf + 2, msg->msg, msg->len);

		if (attempts > 5)
		attempts = 5;

		tda9950_write(priv->client, REG_CCONR, attempts);

		return tda9950_write_range(priv->client, REG_CDR0, buf, 2 + msg->len);
		}

		static int tda9950_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
		{
		struct tda9950_priv *priv = adap->priv;
		u16 addresses;
		u8 buf[2];

		if (addr == CEC_LOG_ADDR_INVALID)
		addresses = priv->addresses = 0;
		else
		addresses = priv->addresses \|= BIT(addr);

		/* TDA9950 doesn't want address 15 set */
		addresses &= 0x7fff;
		buf[0] = addresses >> 8;
		buf[1] = addresses;

		return tda9950_write_range(priv->client, REG_ACKH, buf, 2);
		}

		/*
		* When operating as part of the TDA998x, we need additional handling
		* to initialise and shut down the TDA9950 part of the device. These
		* two hooks are provided to allow the TDA998x code to perform those
		* activities.
		*/
		static int tda9950_glue_open(struct tda9950_priv *priv)
		{
		int ret = 0;

		if (priv->glue && priv->glue->open)
		ret = priv->glue->open(priv->glue->data);

		priv->open = true;

		return ret;
		}

		static void tda9950_glue_release(struct tda9950_priv *priv)
		{
		priv->open = false;

		if (priv->glue && priv->glue->release)
		priv->glue->release(priv->glue->data);
		}

		static int tda9950_open(struct tda9950_priv *priv)
		{
		struct i2c_client *client = priv->client;
		int ret;

		ret = tda9950_glue_open(priv);
		if (ret)
		return ret;

		/* Reset the TDA9950, and wait 250ms for it to recover */
		tda9950_write(client, REG_CCR, CCR_RESET);
		msleep(250);

		tda9950_cec_adap_log_addr(priv->adap, CEC_LOG_ADDR_INVALID);

		/* Start the command processor */
		tda9950_write(client, REG_CCR, CCR_ON);

		return 0;
		}

		static void tda9950_release(struct tda9950_priv *priv)
		{
		struct i2c_client *client = priv->client;
		int timeout = 50;
		u8 csr;

		/* Stop the command processor */
		tda9950_write(client, REG_CCR, 0);

		/* Wait up to .5s for it to signal non-busy */
		do {
		csr = tda9950_read(client, REG_CSR);
		if (!(csr & CSR_BUSY) \|\| --timeout)
		break;
		msleep(10);
		} while (1);

		/* Warn the user that their IRQ may die if it's shared. */
		if (csr & CSR_BUSY)
		dev_warn(&client->dev, "command processor failed to stop, irq%d may die (csr=0x%02x)\n",
		client->irq, csr);

		tda9950_glue_release(priv);
		}

		static int tda9950_cec_adap_enable(struct cec_adapter *adap, bool enable)
		{
		struct tda9950_priv *priv = adap->priv;

		if (!enable) {
		tda9950_release(priv);
		return 0;
		} else {
		return tda9950_open(priv);
		}
		}

		static const struct cec_adap_ops tda9950_cec_ops = {
		.adap_enable = tda9950_cec_adap_enable,
		.adap_log_addr = tda9950_cec_adap_log_addr,
		.adap_transmit = tda9950_cec_transmit,
		};

		/*
		* When operating as part of the TDA998x, we need to claim additional
		* resources. These two hooks permit the management of those resources.
		*/
		static void tda9950_devm_glue_exit(void *data)
		{
		struct tda9950_glue *glue = data;

		if (glue && glue->exit)
		glue->exit(glue->data);
		}

		static int tda9950_devm_glue_init(struct device dev, struct tda9950_glue glue)
		{
		int ret;

		if (glue && glue->init) {
		ret = glue->init(glue->data);
		if (ret)
		return ret;
		}

		ret = devm_add_action(dev, tda9950_devm_glue_exit, glue);
		if (ret)
		tda9950_devm_glue_exit(glue);

		return ret;
		}

		static void tda9950_cec_del(void *data)
		{
		struct tda9950_priv *priv = data;

		cec_delete_adapter(priv->adap);
		}

		static int tda9950_probe(struct i2c_client *client,
		const struct i2c_device_id *id)
		{
		struct tda9950_glue *glue = client->dev.platform_data;
		struct device *dev = &client->dev;
		struct tda9950_priv *priv;
		unsigned long irqflags;
		int ret;
		u8 cvr;

		/*
		* We must have I2C functionality: our multi-byte accesses
		* must be performed as a single contiguous transaction.
		*/
		if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
		dev_err(&client->dev,
		"adapter does not support I2C functionality\n");
		return -ENXIO;
		}

		/* We must have an interrupt to be functional. */
		if (client->irq <= 0) {
		dev_err(&client->dev, "driver requires an interrupt\n");
		return -ENXIO;
		}

		priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
		if (!priv)
		return -ENOMEM;

		priv->client = client;
		priv->glue = glue;

		i2c_set_clientdata(client, priv);

		/*
		* If we're part of a TDA998x, we want the class devices to be
		* associated with the HDMI Tx so we have a tight relationship
		* between the HDMI interface and the CEC interface.
		*/
		priv->hdmi = dev;
		if (glue && glue->parent)
		priv->hdmi = glue->parent;

		priv->adap = cec_allocate_adapter(&tda9950_cec_ops, priv, "tda9950",
		CEC_CAP_DEFAULTS,
		CEC_MAX_LOG_ADDRS);
		if (IS_ERR(priv->adap))
		return PTR_ERR(priv->adap);

		ret = devm_add_action(dev, tda9950_cec_del, priv);
		if (ret) {
		cec_delete_adapter(priv->adap);
		return ret;
		}

		ret = tda9950_devm_glue_init(dev, glue);
		if (ret)
		return ret;

		ret = tda9950_glue_open(priv);
		if (ret)
		return ret;

		cvr = tda9950_read(client, REG_CVR);

		dev_info(&client->dev,
		"TDA9950 CEC interface, hardware version %u.%u\n",
		cvr >> 4, cvr & 15);

		tda9950_glue_release(priv);

		irqflags = IRQF_TRIGGER_FALLING;
		if (glue)
		irqflags = glue->irq_flags;

		ret = devm_request_threaded_irq(dev, client->irq, NULL, tda9950_irq,
		irqflags \| IRQF_SHARED \| IRQF_ONESHOT,
		dev_name(&client->dev), priv);
		if (ret < 0)
		return ret;

		priv->notify = cec_notifier_get(priv->hdmi);
		if (!priv->notify)
		return -ENOMEM;

		ret = cec_register_adapter(priv->adap, priv->hdmi);
		if (ret < 0) {
		cec_notifier_put(priv->notify);
		return ret;
		}

		/*
		* CEC documentation says we must not call cec_delete_adapter
		* after a successful call to cec_register_adapter().
		*/
		devm_remove_action(dev, tda9950_cec_del, priv);

		cec_register_cec_notifier(priv->adap, priv->notify);

		return 0;
		}

		static int tda9950_remove(struct i2c_client *client)
		{
		struct tda9950_priv *priv = i2c_get_clientdata(client);

		cec_unregister_adapter(priv->adap);
		cec_notifier_put(priv->notify);

		return 0;
		}

		static struct i2c_device_id tda9950_ids[] = {
		{ "tda9950", 0 },
		{ },
		};
		MODULE_DEVICE_TABLE(i2c, tda9950_ids);

		static struct i2c_driver tda9950_driver = {
		.probe = tda9950_probe,
		.remove = tda9950_remove,
		.driver = {
		.name = "tda9950",
		},
		.id_table = tda9950_ids,
		};

		module_i2c_driver(tda9950_driver);

		MODULE_AUTHOR("Russell King <rmk+kernel@armlinux.org.uk>");
		MODULE_DESCRIPTION("TDA9950/TDA998x Consumer Electronics Control Driver");
		MODULE_LICENSE("GPL v2");

drivers/gpu/drm/i2c/tda998x_drv.c

+215 −27

Original line number	Diff line number	Diff line
		@@ -16,8 +16,10 @@
		*/

		#include <linux/component.h>
		#include <linux/gpio/consumer.h>
		#include <linux/hdmi.h>
		#include <linux/module.h>
		#include <linux/platform_data/tda9950.h>
		#include <linux/irq.h>
		#include <sound/asoundef.h>
		#include <sound/hdmi-codec.h>
		@@ -29,6 +31,8 @@
		#include <drm/drm_of.h>
		#include <drm/i2c/tda998x.h>

		#include <media/cec-notifier.h>

		#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)

		struct tda998x_audio_port {
		@@ -55,6 +59,7 @@ struct tda998x_priv {
		struct platform_device *audio_pdev;
		struct mutex audio_mutex;

		struct mutex edid_mutex;
		wait_queue_head_t wq_edid;
		volatile int wq_edid_wait;

		@@ -67,6 +72,9 @@ struct tda998x_priv {
		struct drm_connector connector;

		struct tda998x_audio_port audio_port[2];
		struct tda9950_glue cec_glue;
		struct gpio_desc *calib;
		struct cec_notifier *cec_notify;
		};

		#define conn_to_tda998x_priv(x) \
		@@ -345,6 +353,12 @@ struct tda998x_priv {
		#define REG_CEC_INTSTATUS 0xee /* read */
		# define CEC_INTSTATUS_CEC (1 << 0)
		# define CEC_INTSTATUS_HDMI (1 << 1)
		#define REG_CEC_CAL_XOSC_CTRL1 0xf2
		# define CEC_CAL_XOSC_CTRL1_ENA_CAL BIT(0)
		#define REG_CEC_DES_FREQ2 0xf5
		# define CEC_DES_FREQ2_DIS_AUTOCAL BIT(7)
		#define REG_CEC_CLK 0xf6
		# define CEC_CLK_FRO 0x11
		#define REG_CEC_FRO_IM_CLK_CTRL 0xfb /* read/write */
		# define CEC_FRO_IM_CLK_CTRL_GHOST_DIS (1 << 7)
		# define CEC_FRO_IM_CLK_CTRL_ENA_OTP (1 << 6)
		@@ -359,6 +373,7 @@ struct tda998x_priv {
		# define CEC_RXSHPDLEV_HPD (1 << 1)

		#define REG_CEC_ENAMODS 0xff /* read/write */
		# define CEC_ENAMODS_EN_CEC_CLK (1 << 7)
		# define CEC_ENAMODS_DIS_FRO (1 << 6)
		# define CEC_ENAMODS_DIS_CCLK (1 << 5)
		# define CEC_ENAMODS_EN_RXSENS (1 << 2)
		@@ -417,6 +432,114 @@ cec_read(struct tda998x_priv *priv, u8 addr)
		return val;
		}

		static void cec_enamods(struct tda998x_priv *priv, u8 mods, bool enable)
		{
		int val = cec_read(priv, REG_CEC_ENAMODS);

		if (val < 0)
		return;

		if (enable)
		val \|= mods;
		else
		val &= ~mods;

		cec_write(priv, REG_CEC_ENAMODS, val);
		}

		static void tda998x_cec_set_calibration(struct tda998x_priv *priv, bool enable)
		{
		if (enable) {
		u8 val;

		cec_write(priv, 0xf3, 0xc0);
		cec_write(priv, 0xf4, 0xd4);

		/* Enable automatic calibration mode */
		val = cec_read(priv, REG_CEC_DES_FREQ2);
		val &= ~CEC_DES_FREQ2_DIS_AUTOCAL;
		cec_write(priv, REG_CEC_DES_FREQ2, val);

		/* Enable free running oscillator */
		cec_write(priv, REG_CEC_CLK, CEC_CLK_FRO);
		cec_enamods(priv, CEC_ENAMODS_DIS_FRO, false);

		cec_write(priv, REG_CEC_CAL_XOSC_CTRL1,
		CEC_CAL_XOSC_CTRL1_ENA_CAL);
		} else {
		cec_write(priv, REG_CEC_CAL_XOSC_CTRL1, 0);
		}
		}

		/*
		* Calibration for the internal oscillator: we need to set calibration mode,
		* and then pulse the IRQ line low for a 10ms ± 1% period.
		*/
		static void tda998x_cec_calibration(struct tda998x_priv *priv)
		{
		struct gpio_desc *calib = priv->calib;

		mutex_lock(&priv->edid_mutex);
		if (priv->hdmi->irq > 0)
		disable_irq(priv->hdmi->irq);
		gpiod_direction_output(calib, 1);
		tda998x_cec_set_calibration(priv, true);

		local_irq_disable();
		gpiod_set_value(calib, 0);
		mdelay(10);
		gpiod_set_value(calib, 1);
		local_irq_enable();

		tda998x_cec_set_calibration(priv, false);
		gpiod_direction_input(calib);
		if (priv->hdmi->irq > 0)
		enable_irq(priv->hdmi->irq);
		mutex_unlock(&priv->edid_mutex);
		}

		static int tda998x_cec_hook_init(void *data)
		{
		struct tda998x_priv *priv = data;
		struct gpio_desc *calib;

		calib = gpiod_get(&priv->hdmi->dev, "nxp,calib", GPIOD_ASIS);
		if (IS_ERR(calib)) {
		dev_warn(&priv->hdmi->dev, "failed to get calibration gpio: %ld\n",
		PTR_ERR(calib));
		return PTR_ERR(calib);
		}

		priv->calib = calib;

		return 0;
		}

		static void tda998x_cec_hook_exit(void *data)
		{
		struct tda998x_priv *priv = data;

		gpiod_put(priv->calib);
		priv->calib = NULL;
		}

		static int tda998x_cec_hook_open(void *data)
		{
		struct tda998x_priv *priv = data;

		cec_enamods(priv, CEC_ENAMODS_EN_CEC_CLK \| CEC_ENAMODS_EN_CEC, true);
		tda998x_cec_calibration(priv);

		return 0;
		}

		static void tda998x_cec_hook_release(void *data)
		{
		struct tda998x_priv *priv = data;

		cec_enamods(priv, CEC_ENAMODS_EN_CEC_CLK \| CEC_ENAMODS_EN_CEC, false);
		}

		static int
		set_page(struct tda998x_priv *priv, u16 reg)
		{
		@@ -657,10 +780,13 @@ static irqreturn_t tda998x_irq_thread(int irq, void *data)
		sta, cec, lvl, flag0, flag1, flag2);

		if (cec & CEC_RXSHPDINT_HPD) {
		if (lvl & CEC_RXSHPDLEV_HPD)
		if (lvl & CEC_RXSHPDLEV_HPD) {
		tda998x_edid_delay_start(priv);
		else
		} else {
		schedule_work(&priv->detect_work);
		cec_notifier_set_phys_addr(priv->cec_notify,
		CEC_PHYS_ADDR_INVALID);
		}

		handled = true;
		}
		@@ -981,6 +1107,8 @@ static int tda998x_connector_fill_modes(struct drm_connector *connector,
		if (connector->edid_blob_ptr) {
		struct edid edid = (void )connector->edid_blob_ptr->data;

		cec_notifier_set_phys_addr_from_edid(priv->cec_notify, edid);

		priv->sink_has_audio = drm_detect_monitor_audio(edid);
		} else {
		priv->sink_has_audio = false;
		@@ -1024,6 +1152,8 @@ static int read_edid_block(void data, u8 buf, unsigned int blk, size_t length)
		offset = (blk & 1) ? 128 : 0;
		segptr = blk / 2;

		mutex_lock(&priv->edid_mutex);

		reg_write(priv, REG_DDC_ADDR, 0xa0);
		reg_write(priv, REG_DDC_OFFS, offset);
		reg_write(priv, REG_DDC_SEGM_ADDR, 0x60);
		@@ -1043,14 +1173,15 @@ static int read_edid_block(void data, u8 buf, unsigned int blk, size_t length)
		msecs_to_jiffies(100));
		if (i < 0) {
		dev_err(&priv->hdmi->dev, "read edid wait err %d\n", i);
		return i;
		ret = i;
		goto failed;
		}
		} else {
		for (i = 100; i > 0; i--) {
		msleep(1);
		ret = reg_read(priv, REG_INT_FLAGS_2);
		if (ret < 0)
		return ret;
		goto failed;
		if (ret & INT_FLAGS_2_EDID_BLK_RD)
		break;
		}
		@@ -1058,17 +1189,22 @@ static int read_edid_block(void data, u8 buf, unsigned int blk, size_t length)

		if (i == 0) {
		dev_err(&priv->hdmi->dev, "read edid timeout\n");
		return -ETIMEDOUT;
		ret = -ETIMEDOUT;
		goto failed;
		}

		ret = reg_read_range(priv, REG_EDID_DATA_0, buf, length);
		if (ret != length) {
		dev_err(&priv->hdmi->dev, "failed to read edid block %d: %d\n",
		blk, ret);
		return ret;
		goto failed;
		}

		return 0;
		ret = 0;

		failed:
		mutex_unlock(&priv->edid_mutex);
		return ret;
		}

		static int tda998x_connector_get_modes(struct drm_connector *connector)
		@@ -1423,6 +1559,9 @@ static void tda998x_destroy(struct tda998x_priv *priv)
		cancel_work_sync(&priv->detect_work);

		i2c_unregister_device(priv->cec);

		if (priv->cec_notify)
		cec_notifier_put(priv->cec_notify);
		}

		/* I2C driver functions */
		@@ -1472,10 +1611,16 @@ static int tda998x_get_audio_ports(struct tda998x_priv *priv,
		static int tda998x_create(struct i2c_client client, struct tda998x_priv priv)
		{
		struct device_node *np = client->dev.of_node;
		struct i2c_board_info cec_info;
		u32 video;
		int rev_lo, rev_hi, ret;

		mutex_init(&priv->audio_mutex); /* Protect access from audio thread */
		mutex_init(&priv->mutex); /* protect the page access */
		mutex_init(&priv->audio_mutex); /* protect access from audio thread */
		mutex_init(&priv->edid_mutex);
		init_waitqueue_head(&priv->edid_delay_waitq);
		timer_setup(&priv->edid_delay_timer, tda998x_edid_delay_done, 0);
		INIT_WORK(&priv->detect_work, tda998x_detect_work);

		priv->vip_cntrl_0 = VIP_CNTRL_0_SWAP_A(2) \| VIP_CNTRL_0_SWAP_B(3);
		priv->vip_cntrl_1 = VIP_CNTRL_1_SWAP_C(0) \| VIP_CNTRL_1_SWAP_D(1);
		@@ -1485,14 +1630,6 @@ static int tda998x_create(struct i2c_client client, struct tda998x_priv priv)
		priv->cec_addr = 0x34 + (client->addr & 0x03);
		priv->current_page = 0xff;
		priv->hdmi = client;
		priv->cec = i2c_new_dummy(client->adapter, priv->cec_addr);
		if (!priv->cec)
		return -ENODEV;

		mutex_init(&priv->mutex); /* protect the page access */
		init_waitqueue_head(&priv->edid_delay_waitq);
		timer_setup(&priv->edid_delay_timer, tda998x_edid_delay_done, 0);
		INIT_WORK(&priv->detect_work, tda998x_detect_work);

		/* wake up the device: */
		cec_write(priv, REG_CEC_ENAMODS,
		@@ -1502,10 +1639,15 @@ static int tda998x_create(struct i2c_client client, struct tda998x_priv priv)

		/* read version: */
		rev_lo = reg_read(priv, REG_VERSION_LSB);
		if (rev_lo < 0) {
		dev_err(&client->dev, "failed to read version: %d\n", rev_lo);
		return rev_lo;
		}

		rev_hi = reg_read(priv, REG_VERSION_MSB);
		if (rev_lo < 0 \|\| rev_hi < 0) {
		ret = rev_lo < 0 ? rev_lo : rev_hi;
		goto fail;
		if (rev_hi < 0) {
		dev_err(&client->dev, "failed to read version: %d\n", rev_hi);
		return rev_hi;
		}

		priv->rev = rev_lo \| rev_hi << 8;
		@@ -1529,7 +1671,7 @@ static int tda998x_create(struct i2c_client client, struct tda998x_priv priv)
		default:
		dev_err(&client->dev, "found unsupported device: %04x\n",
		priv->rev);
		goto fail;
		return -ENXIO;
		}

		/* after reset, enable DDC: */
		@@ -1545,6 +1687,15 @@ static int tda998x_create(struct i2c_client client, struct tda998x_priv priv)
		cec_write(priv, REG_CEC_FRO_IM_CLK_CTRL,
		CEC_FRO_IM_CLK_CTRL_GHOST_DIS \| CEC_FRO_IM_CLK_CTRL_IMCLK_SEL);

		/* ensure interrupts are disabled */
		cec_write(priv, REG_CEC_RXSHPDINTENA, 0);

		/* clear pending interrupts */
		cec_read(priv, REG_CEC_RXSHPDINT);
		reg_read(priv, REG_INT_FLAGS_0);
		reg_read(priv, REG_INT_FLAGS_1);
		reg_read(priv, REG_INT_FLAGS_2);

		/* initialize the optional IRQ */
		if (client->irq) {
		unsigned long irq_flags;
		@@ -1552,13 +1703,11 @@ static int tda998x_create(struct i2c_client client, struct tda998x_priv priv)
		/* init read EDID waitqueue and HDP work */
		init_waitqueue_head(&priv->wq_edid);

		/* clear pending interrupts */
		reg_read(priv, REG_INT_FLAGS_0);
		reg_read(priv, REG_INT_FLAGS_1);
		reg_read(priv, REG_INT_FLAGS_2);

		irq_flags =
		irqd_get_trigger_type(irq_get_irq_data(client->irq));

		priv->cec_glue.irq_flags = irq_flags;

		irq_flags \|= IRQF_SHARED \| IRQF_ONESHOT;
		ret = request_threaded_irq(client->irq, NULL,
		tda998x_irq_thread, irq_flags,
		@@ -1567,13 +1716,46 @@ static int tda998x_create(struct i2c_client client, struct tda998x_priv priv)
		dev_err(&client->dev,
		"failed to request IRQ#%u: %d\n",
		client->irq, ret);
		goto fail;
		goto err_irq;
		}

		/* enable HPD irq */
		cec_write(priv, REG_CEC_RXSHPDINTENA, CEC_RXSHPDLEV_HPD);
		}

		priv->cec_notify = cec_notifier_get(&client->dev);
		if (!priv->cec_notify) {
		ret = -ENOMEM;
		goto fail;
		}

		priv->cec_glue.parent = &client->dev;
		priv->cec_glue.data = priv;
		priv->cec_glue.init = tda998x_cec_hook_init;
		priv->cec_glue.exit = tda998x_cec_hook_exit;
		priv->cec_glue.open = tda998x_cec_hook_open;
		priv->cec_glue.release = tda998x_cec_hook_release;

		/*
		* Some TDA998x are actually two I2C devices merged onto one piece
		* of silicon: TDA9989 and TDA19989 combine the HDMI transmitter
		* with a slightly modified TDA9950 CEC device. The CEC device
		* is at the TDA9950 address, with the address pins strapped across
		* to the TDA998x address pins. Hence, it always has the same
		* offset.
		*/
		memset(&cec_info, 0, sizeof(cec_info));
		strlcpy(cec_info.type, "tda9950", sizeof(cec_info.type));
		cec_info.addr = priv->cec_addr;
		cec_info.platform_data = &priv->cec_glue;
		cec_info.irq = client->irq;

		priv->cec = i2c_new_device(client->adapter, &cec_info);
		if (!priv->cec) {
		ret = -ENODEV;
		goto fail;
		}

		/* enable EDID read irq: */
		reg_set(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);

		@@ -1596,12 +1778,18 @@ static int tda998x_create(struct i2c_client client, struct tda998x_priv priv)
		tda998x_audio_codec_init(priv, &client->dev);

		return 0;

		fail:
		/* if encoder_init fails, the encoder slave is never registered,
		* so cleanup here:
		*/
		i2c_unregister_device(priv->cec);
		return -ENXIO;
		if (priv->cec_notify)
		cec_notifier_put(priv->cec_notify);
		if (client->irq)
		free_irq(client->irq, priv);
		err_irq:
		return ret;
		}

		static void tda998x_encoder_prepare(struct drm_encoder *encoder)