Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit efb26a71 authored by Christopher Braga's avatar Christopher Braga
Browse files

Revert "ARM: dts: msm: Add SB LUTDMA support for lahaina target" 

This reverts commit 672369c1.
Intermittent crashes have been seen on Lahaina silicon when
SBDMA / LUTBUS is used.

Change-Id: I816b0d8914357c73a4f5b3f7781ad176a2061a50
parent 65a1c3e0

bindings/sde.txt

+5 −8
Original line number Diff line number Diff line
@@ -338,11 +338,9 @@ Optional properties: 
				control register. Number of offsets defined should

				match the number of offsets defined in

				property: qcom,sde-wb-off

- qcom,sde-reg-dma-off:         Array of u32 offset addresses of the dma hardware blocks,

				relative to "regdma_phys" defined in reg property.

- qcom,sde-reg-dma-id:		Array of u32 DMA block type ids corresponding to the

				offsets declared in property: qcom,sde-reg-dma-off

- qcom,sde-reg-dma-version:	Version of the reg dma hardware blocks.

- qcom,sde-reg-dma-off:         Offset of the register dma hardware block from

				"regdma_phys" defined in reg property.

- qcom,sde-reg-dma-version:	Version of the reg dma hardware block.

- qcom,sde-reg-dma-trigger-off: Offset of the lut dma trigger reg from "mdp_phys"

				defined in reg property.

- qcom,sde-reg-dma-broadcast-disabled: Boolean property to indicate if broadcast
@@ -804,9 +802,8 @@ Example: 
    qcom,sde-vbif-qos-cwb-remap = <3 3 4 4 5 5 6 3>;

    qcom,sde-vbif-qos-lutdma-remap = <3 3 3 3 4 4 4 4>;



    qcom,sde-reg-dma-off = <0 0x400>;

    qcom,sde-reg-dma-id = <0 1>;

    qcom,sde-reg-dma-version = <0x00020000>;

    qcom,sde-reg-dma-off = <0>;

    qcom,sde-reg-dma-version = <0x00010002>;

    qcom,sde-reg-dma-trigger-off = <0x119c>;

    qcom,sde-reg-dma-broadcast-disabled = <0>;

    qcom,sde-reg-dma-xin-id = <7>;

display/lahaina-sde.dtsi

+6 −7
Original line number Diff line number Diff line
@@ -5,7 +5,7 @@ 
		compatible = "qcom,sde-kms";

		reg = <0x0ae00000 0x84000>,

		      <0x0aeb0000 0x2008>,

		      <0x0aeac000 0x648>,

		      <0x0aeac000 0x214>,

		      <0x0ae8f000 0x02c>,

		      <0x0af50000 0x038>;

		reg-names = "mdp_phys",
@@ -221,9 +221,8 @@ 


		/* offsets are relative to "mdp_phys + qcom,sde-off */



		qcom,sde-reg-dma-off = <0 0x400>;

		qcom,sde-reg-dma-id = <0 1>;

		qcom,sde-reg-dma-version = <0x00020000>;

		qcom,sde-reg-dma-off = <0>;

		qcom,sde-reg-dma-version = <0x00010002>;

		qcom,sde-reg-dma-trigger-off = <0x119c>;

		qcom,sde-reg-dma-xin-id = <7>;

		qcom,sde-reg-dma-clk-ctrl = <0x2bc 20>;
@@ -243,7 +242,7 @@ 
			qcom,sde-vig-csc-off = <0x1a00>;

			qcom,sde-vig-qseed-off = <0xa00>;

			qcom,sde-vig-qseed-size = <0xa0>;

			qcom,sde-vig-gamut = <0x1d00 0x00060001>;

			qcom,sde-vig-gamut = <0x1d00 0x00060000>;

			qcom,sde-vig-igc = <0x1d00 0x00060000>;

			qcom,sde-vig-inverse-pma;

		};
@@ -265,13 +264,13 @@ 
		};



		qcom,sde-dspp-blocks {

			qcom,sde-dspp-igc = <0x1260 0x00030002>;

			qcom,sde-dspp-igc = <0x0 0x00030001>;

			qcom,sde-dspp-hsic = <0x800 0x00010007>;

			qcom,sde-dspp-memcolor = <0x880 0x00010007>;

			qcom,sde-dspp-hist = <0x800 0x00010007>;

			qcom,sde-dspp-sixzone= <0x900 0x00010007>;

			qcom,sde-dspp-vlut = <0xa00 0x00010008>;

			qcom,sde-dspp-gamut = <0x1000 0x00040003>;

			qcom,sde-dspp-gamut = <0x1000 0x00040002>;

			qcom,sde-dspp-pcc = <0x1700 0x00040000>;

			qcom,sde-dspp-gc = <0x17c0 0x00010008>;

			qcom,sde-dspp-dither = <0x82c 0x00010007>;