Merge "ARM: dts: msm: Adding device tree node for Blair pinctrl"

- HOLI

  compatible = "qcom,holi"

- BLAIR

  compatible = "qcom,blair"

- MONACO

  compatible = "qcom,monaco"

compatible = "qcom,holi-cdp"

compatible = "qcom,holi-qrd"

compatible = "qcom,holi-atp"

compatible = "qcom,blair-rumi"

compatible = "qcom,scuba-idp"

compatible = "qcom,monaco-rumi"

compatible = "qcom,sdxnightjar-mtp"

%YAML 1.2

---

$id: http://devicetree.org/schemas/bindings/pinctrl/qcom,blair-pinctrl.yaml#

$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Technologies, Inc. BLAIR TLMM block

description: |

  This binding describes the Top Level Mode Multiplexer block found in the

  HOLI platform.

properties:

  compatible:

      Usage: required

      Value type: <string>

      Definition: must be "qcom,blair-pinctrl"

  reg:

      Usage: required

      Value type: <prop-encoded-array>

      Definition: the base address and size of the TLMM register space.

  interrupts:

      Usage: required

      Value type: <prop-encoded-array>

      Definition: should specify the TLMM summary IRQ.

  interrupt-controller:

      Usage: required

      Value type: <none>

      Definition: identifies this node as an interrupt controller

  #interrupt-cells:

      Usage: required

      Value type: <u32>

      Definition: must be 2. Specifying the pin number and flags, as defined

                  in <dt-bindings/interrupt-controller/irq.h>

  gpio-controller:

      Usage: required

      Value type: <none>

      Definition: identifies this node as a gpio controller

  #gpio-cells:

      Usage: required

      Value type: <u32>

      Definition: must be 2. Specifying the pin number and flags, as defined

                  in <dt-bindings/gpio/gpio.h>

  wakeup-parent:

      Usage: optional

      Value type: <phandle>

      Definition: A phandle to the wakeup interrupt controller for the SoC.

  Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for

  a general description of GPIO and interrupt bindings.

  Please refer to pinctrl-bindings.txt in this directory for details of the

  common pinctrl bindings used by client devices, including the meaning of the

  phrase "pin configuration node".

  The pin configuration nodes act as a container for an arbitrary number of

  subnodes. Each of these subnodes represents some desired configuration for a

  pin, a group, or a list of pins or groups. This configuration can include the

  mux function to select on those pin(s)/group(s), and various pin configuration

  parameters, such as pull-up, drive strength, etc.

  PIN CONFIGURATION NODES:

  The name of each subnode is not important; all subnodes should be enumerated

  and processed purely based on their content.

  Each subnode only affects those parameters that are explicitly listed. In

  other words, a subnode that lists a mux function but no pin configuration

  parameters implies no information about any pin configuration parameters.

  Similarly, a pin subnode that describes a pullup parameter implies no

  information about e.g. the mux function.

  The following generic properties as defined in pinctrl-bindings.txt are valid

  to specify in a pin configuration subnode:

  pins:

        Usage: required

        Value type: <string-array>

        Definition: List of gpio pins affected by the properties specified in

                    this subnode.

        Valid pins:

                  gpio0-gpio155

                  Supports mux, bias and drive-strength

                  sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd,

                  sdc2_data sdc1_rclk

                  Supports bias and drive-strength

  function:

        Usage: required

        Value type: <string>

        Definition: Specify the alternative function to be configured for the

                    specified pins. Functions are only valid for gpio pins.

        Valid values:

          blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,

          bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,

          qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,

          dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,

          blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,

          mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,

          atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,

          cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,

          pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,

          qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,

          qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,

          atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,

          atest_usb20, atest_char0, dac_calib10, qdss_stm10,

          qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,

          blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,

          qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,

          qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,

          dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,

          qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,

          dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,

          dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,

          dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,

          dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,

          sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,

          qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,

          uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,

          blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,

          qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,

          blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,

          cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,

          blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,

          qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,

          isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,

          qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,

          sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,

          gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,

          qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,

          tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,

          qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,

          sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,

          sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,

          ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,

          blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,

          pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,

          qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,

          qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,

          gpio

  bias-disable:

    Usage: optional

    Value type: <none>

    Definition: The specified pins should be configured as no pull.

  bias-pull-down:

    Usage: optional

    Value type: <none>

    Definition: The specified pins should be configured as pull down.

  bias-pull-up:

    Usage: optional

    Value type: <none>

    Definition: The specified pins should be configured as pull up.

  output-high:

    Usage: optional

    Value type: <none>

    Definition: The specified pins are configured in output mode, driven high.

                  Not valid for sdc pins.

  output-low:

    Usage: optional

    Value type: <none>

    Definition: The specified pins are configured in output mode, driven low.

                  Not valid for sdc pins.

  drive-strength:

    Usage: optional

    Value type: <u32>

    Definition: Selects the drive strength for the specified pins, in mA.

    Valid values: 2, 4, 6, 8, 10, 12, 14 and 16

examples:

  - |

    tlmm: pinctrl@400000 {

      compatible = "qcom,blair-pinctrl";

      reg = <0x400000 0x800000>;

      interrupts = <0 227 0>;

      gpio-controller;

      #gpio-cells = <2>;

      interrupt-controller;

      #interrupt-cells = <2>;

    };

	holi-mtp-usbc.dtb

endif

ifeq ($(CONFIG_BUILD_ARM64_DT_OVERLAY),y)

dtbo-$(CONFIG_ARCH_BLAIR) += blair-rumi-overlay.dtbo

blair-rumi-overlay.dtbo-base := blair.dtb

else

dtb-$(CONFIG_ARCH_BLAIR) += blair-rumi.dtb

endif

ifeq ($(CONFIG_BUILD_ARM64_DT_OVERLAY),y)

dtbo-$(CONFIG_ARCH_SHIMA) +=    \

	shima-rumi-overlay.dtbo \

/dts-v1/;

/plugin/;

#include "blair-rumi.dtsi"

/ {

	model = "Qualcomm Technologies, Inc. Blair RUMI";

	compatible = "qcom,blair-rumi", "qcom,blair", "qcom,rumi";

	qcom,msm-id = <507 0x10000>;

	qcom,board-id = <15 0>;

};