ARM: dts: msm: Adding device tree node for Blair pinctrl (a7ec1d2d) · Commits · e / devices / android_kernel_fairphone_FP5

qcom/blair-pinctrl.dtsi

0 → 100644

+1111 −0

Original line number	Diff line number	Diff line
		&soc {
		tlmm: pinctrl@400000 {
		compatible = "qcom,blair-pinctrl";
		reg = <0x400000 0x800000>;
		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
		wakeup-parent = <&wakegic>;

		qupv3_se0_i2c_pins: qupv3_se0_i2c_pins {
		qupv3_se0_i2c_active: qupv3_se0_i2c_active {
		mux {
		pins = "gpio0", "gpio1";
		function = "qup00";
		};

		config {
		pins = "gpio0", "gpio1";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		qupv3_se0_i2c_sleep: qupv3_se0_i2c_sleep {
		mux {
		pins = "gpio0", "gpio1";
		function = "gpio";
		};

		config {
		pins = "gpio0", "gpio1";
		drive-strength = <2>;
		bias-disable;
		};
		};
		};

		nfc {
		nfc_int_active: nfc_int_active {
		/* active state */
		mux {
		/* GPIO 9: NFC Read Interrupt */
		pins = "gpio9";
		function = "gpio";
		};

		config {
		pins = "gpio9";
		drive-strength = <2>; /* 2 MA */
		bias-pull-down;
		};
		};

		nfc_int_suspend: nfc_int_suspend {
		/* sleep state */
		mux {
		/* GPIO 9: NFC Read Interrupt */
		pins = "gpio9";
		function = "gpio";
		};

		config {
		pins = "gpio9";
		drive-strength = <2>; /* 2 MA */
		bias-pull-down;
		};
		};

		nfc_enable_active: nfc_enable_active {
		mux {
		/* 6: Enable, 8: Firmware, 7: CLOCK */
		pins = "gpio6", "gpio8", "gpio7";
		function = "gpio";
		};

		config {
		pins = "gpio6", "gpio8", "gpio7";
		drive-strength = <2>; /* 2 MA */
		bias-disable;
		};
		};

		nfc_enable_suspend: nfc_enable_suspend {
		mux {
		/* 6: Enable, 8: Firmware, 7: CLOCK */
		pins = "gpio6", "gpio8", "gpio7";
		function = "gpio";
		};

		config {
		pins = "gpio6", "gpio8", "gpio7";
		drive-strength = <2>; /* 2 MA */
		bias-disable;
		};
		};
		};


		qupv3_se0_spi_pins: qupv3_se0_spi_pins {
		qupv3_se0_spi_active: qupv3_se0_spi_active {
		mux {
		pins = "gpio0", "gpio1",
		"gpio2", "gpio3";
		function = "qup00";
		};

		config {
		pins = "gpio0", "gpio1",
		"gpio2", "gpio3";
		drive-strength = <6>;
		bias-disable;
		};
		};

		qupv3_se0_spi_sleep: qupv3_se0_spi_sleep {
		mux {
		pins = "gpio0", "gpio1",
		"gpio2", "gpio3";
		function = "gpio";
		};

		config {
		pins = "gpio0", "gpio1",
		"gpio2", "gpio3";
		drive-strength = <6>;
		bias-disable;
		};
		};
		};

		qupv3_se1_4uart_pins: qupv3_se1_4uart_pins {
		qupv3_se1_default_cts:
		qupv3_se1_default_cts {
		mux {
		pins = "gpio61";
		function = "gpio";
		};

		config {
		pins = "gpio61";
		drive-strength = <2>;
		bias-pull-down;
		};
		};

		qupv3_se1_default_rtsrx:
		qupv3_se1_default_rtsrx {
		mux {
		pins = "gpio62", "gpio64";
		function = "gpio";
		};

		config {
		pins = "gpio62", "gpio64";
		drive-strength = <2>;
		bias-pull-down;
		};
		};

		qupv3_se1_default_tx:
		qupv3_se1_default_tx {
		mux {
		pins = "gpio63";
		function = "gpio";
		};

		config {
		pins = "gpio63";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		qupv3_se1_ctsrx: qupv3_se1_ctsrx {
		mux {
		pins = "gpio61", "gpio64";
		function = "qup01";
		};

		config {
		pins = "gpio61", "gpio64";
		drive-strength = <2>;
		bias-disable;
		};
		};

		qupv3_se1_rts: qupv3_se1_rts {
		mux {
		pins = "gpio62";
		function = "qup01";
		};

		config {
		pins = "gpio62";
		drive-strength = <2>;
		bias-pull-down;
		};
		};

		qupv3_se1_tx: qupv3_se1_tx {
		mux {
		pins = "gpio63";
		function = "qup01";
		};

		config {
		pins = "gpio63";
		drive-strength = <2>;
		bias-pull-up;
		};
		};
		};

		qupv3_se2_i2c_pins: qupv3_se2_i2c_pins {
		qupv3_se2_i2c_active: qupv3_se2_i2c_active {
		mux {
		pins = "gpio45", "gpio46";
		function = "qup02";
		};

		config {
		pins = "gpio45", "gpio46";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		qupv3_se2_i2c_sleep: qupv3_se2_i2c_sleep {
		mux {
		pins = "gpio45", "gpio46";
		function = "gpio";
		};

		config {
		pins = "gpio45", "gpio46";
		drive-strength = <2>;
		bias-disable;
		};
		};
		};

		qupv3_se2_spi_pins: qupv3_se2_spi_pins {
		qupv3_se2_spi_active: qupv3_se2_spi_active {
		mux {
		pins = "gpio45", "gpio46",
		"gpio56", "gpio57";
		function = "qup02";
		};

		config {
		pins = "gpio45", "gpio46",
		"gpio56", "gpio57";
		drive-strength = <6>;
		bias-disable;
		};
		};

		qupv3_se2_spi_sleep: qupv3_se2_spi_sleep {
		mux {
		pins = "gpio45", "gpio46",
		"gpio56", "gpio57";
		function = "gpio";
		};

		config {
		pins = "gpio45", "gpio46",
		"gpio56", "gpio57";
		drive-strength = <6>;
		bias-disable;
		};
		};
		};

		qupv3_se6_i2c_pins: qupv3_se6_i2c_pins {
		qupv3_se6_i2c_active: qupv3_se6_i2c_active {
		mux {
		pins = "gpio13", "gpio14";
		function = "qup10";
		};

		config {
		pins = "gpio13", "gpio14";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		qupv3_se6_i2c_sleep: qupv3_se6_i2c_sleep {
		mux {
		pins = "gpio13", "gpio14";
		function = "gpio";
		};

		config {
		pins = "gpio13", "gpio14";
		drive-strength = <2>;
		bias-disable;
		};
		};
		};

		qupv3_se6_spi_pins: qupv3_se6_spi_pins {
		qupv3_se6_spi_active: qupv3_se6_spi_active {
		mux {
		pins = "gpio13", "gpio14",
		"gpio15", "gpio16";
		function = "qup10";
		};

		config {
		pins = "gpio13", "gpio14",
		"gpio15", "gpio16";
		drive-strength = <6>;
		bias-disable;
		};
		};

		qupv3_se6_spi_sleep: qupv3_se6_spi_sleep {
		mux {
		pins = "gpio13", "gpio14",
		"gpio15", "gpio16";
		function = "gpio";
		};

		config {
		pins = "gpio13", "gpio14",
		"gpio15", "gpio16";
		drive-strength = <6>;
		bias-disable;
		};
		};
		};

		qupv3_se7_i2c_pins: qupv3_se7_i2c_pins {
		qupv3_se7_i2c_active: qupv3_se7_i2c_active {
		mux {
		pins = "gpio27", "gpio28";
		function = "qup11";
		};

		config {
		pins = "gpio27", "gpio28";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		qupv3_se7_i2c_sleep: qupv3_se7_i2c_sleep {
		mux {
		pins = "gpio27", "gpio28";
		function = "gpio";
		};

		config {
		pins = "gpio27", "gpio28";
		drive-strength = <2>;
		bias-disable;
		};
		};
		};

		qupv3_se8_i2c_pins: qupv3_se8_i2c_pins {
		qupv3_se8_i2c_active: qupv3_se8_i2c_active {
		mux {
		pins = "gpio19", "gpio20";
		function = "qup12";
		};

		config {
		pins = "gpio19", "gpio20";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		qupv3_se8_i2c_sleep: qupv3_se8_i2c_sleep {
		mux {
		pins = "gpio19", "gpio20";
		function = "gpio";
		};

		config {
		pins = "gpio19", "gpio20";
		drive-strength = <2>;
		bias-disable;
		};
		};
		};

		qupv3_se9_2uart_pins: qupv3_se9_2uart_pins {
		qupv3_se9_2uart_active: qupv3_se9_2uart_active {
		mux {
		pins = "gpio25", "gpio26";
		function = "qup13_f2";
		};

		config {
		pins = "gpio25", "gpio26";
		drive-strength = <2>;
		bias-disable;
		};
		};

		qupv3_se9_2uart_sleep: qupv3_se9_2uart_sleep {
		mux {
		pins = "gpio25", "gpio26";
		function = "gpio";
		};

		config {
		pins = "gpio25", "gpio26";
		drive-strength = <2>;
		bias-pull-down;
		};
		};
		};

		qupv3_se10_i2c_pins: qupv3_se10_i2c_pins {
		qupv3_se10_i2c_active: qupv3_se10_i2c_active {
		mux {
		pins = "gpio4", "gpio5";
		function = "qup14";
		};

		config {
		pins = "gpio4", "gpio5";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		qupv3_se10_i2c_sleep: qupv3_se10_i2c_sleep {
		mux {
		pins = "gpio4", "gpio5";
		function = "gpio";
		};

		config {
		pins = "gpio4", "gpio5";
		drive-strength = <2>;
		bias-disable;
		};
		};
		};

		sdc1_on: sdc1_on {
		clk {
		pins = "sdc1_clk";
		bias-disable;
		drive-strength = <16>;
		};

		cmd {
		pins = "sdc1_cmd";
		bias-pull-up;
		drive-strength = <10>;
		};

		data {
		pins = "sdc1_data";
		bias-pull-up;
		drive-strength = <10>;
		};

		rclk {
		pins = "sdc1_rclk";
		bias-pull-down;
		};
		};

		sdc1_off: sdc1_off {
		clk {
		pins = "sdc1_clk";
		bias-disable;
		drive-strength = <2>;
		};

		cmd {
		pins = "sdc1_cmd";
		bias-pull-up;
		drive-strength = <2>;
		};

		data {
		pins = "sdc1_data";
		bias-pull-up;
		drive-strength = <2>;
		};

		rclk {
		pins = "sdc1_rclk";
		bias-pull-down;
		};
		};

		sdc2_on: sdc2_on {
		clk {
		pins = "sdc2_clk";
		bias-disable;
		drive-strength = <16>;
		};

		cmd {
		pins = "sdc2_cmd";
		bias-pull-up;
		drive-strength = <10>;
		};

		data {
		pins = "sdc2_data";
		bias-pull-up;
		drive-strength = <10>;
		};

		sd-cd {
		pins = "gpio94";
		bias-pull-up;
		drive-strength = <2>;
		};
		};

		sdc2_off: sdc2_off {
		clk {
		pins = "sdc2_clk";
		bias-disable;
		drive-strength = <2>;
		};

		cmd {
		pins = "sdc2_cmd";
		bias-pull-up;
		drive-strength = <2>;
		};

		data {
		pins = "sdc2_data";
		bias-pull-up;
		drive-strength = <2>;
		};

		sd-cd {
		pins = "gpio94";
		bias-disable;
		drive-strength = <2>;
		};
		};

		/* WSA speaker reset pins */
		spkr_1_sd_n {
		spkr_1_sd_n_sleep: spkr_1_sd_n_sleep {
		mux {
		pins = "gpio86";
		function = "gpio";
		};

		config {
		pins = "gpio86";
		drive-strength = <2>; /* 2 mA */
		bias-pull-down;
		input-enable;
		};
		};

		spkr_1_sd_n_active: spkr_1_sd_n_active {
		mux {
		pins = "gpio86";
		function = "gpio";
		};

		config {
		pins = "gpio86";
		drive-strength = <16>; /* 16 mA */
		bias-disable;
		output-high;
		};
		};
		};

		spkr_2_sd_n {
		spkr_2_sd_n_sleep: spkr_2_sd_n_sleep {
		mux {
		pins = "gpio11";
		function = "gpio";
		};

		config {
		pins = "gpio11";
		drive-strength = <2>; /* 2 mA */
		bias-pull-down;
		input-enable;
		};
		};

		spkr_2_sd_n_active: spkr_2_sd_n_active {
		mux {
		pins = "gpio11";
		function = "gpio";
		};

		config {
		pins = "gpio11";
		drive-strength = <16>; /* 16 mA */
		bias-disable;
		output-high;
		};
		};
		};

		/* WCD reset pin */
		wcd937x_reset_active: wcd937x_reset_active {
		mux {
		pins = "gpio83";
		function = "gpio";
		};

		config {
		pins = "gpio83";
		drive-strength = <16>;
		output-high;
		};
		};

		wcd937x_reset_sleep: wcd937x_reset_sleep {
		mux {
		pins = "gpio83";
		function = "gpio";
		};

		config {
		pins = "gpio83";
		drive-strength = <16>;
		bias-disable;
		output-low;
		};
		};

		pmx_sde_te: pmx_sde_te {
		sde_te_active: sde_te_active {
		mux {
		pins = "gpio23";
		function = "MDP_VSYNC";
		};

		config {
		pins = "gpio23";
		drive-strength = <2>; /* 2 mA */
		bias-pull-down; /* PULL DOWN */
		};
		};

		sde_te_suspend: sde_te_suspend {
		mux {
		pins = "gpio23";
		function = "MDP_VSYNC";
		};

		config {
		pins = "gpio23";
		drive-strength = <2>; /* 2 mA */
		bias-pull-down; /* PULL DOWN */
		};
		};
		};

		pmx_ts_active {
		ts_active: ts_active {
		mux {
		pins = "gpio21", "gpio22";
		function = "gpio";
		};

		config {
		pins = "gpio21", "gpio22";
		drive-strength = <8>;
		bias-pull-up;
		};
		};
		};

		pmx_ts_int_suspend {
		ts_int_suspend: ts_int_suspend {
		mux {
		pins = "gpio22";
		function = "gpio";
		};

		config {
		pins = "gpio22";
		drive-strength = <2>;
		bias-pull-down;
		};
		};
		};

		pmx_ts_reset_suspend {
		ts_reset_suspend: ts_reset_suspend {
		mux {
		pins = "gpio21";
		function = "gpio";
		};

		config {
		pins = "gpio21";
		drive-strength = <2>;
		bias-pull-down;
		};
		};
		};

		pmx_ts_release {
		pmx_ts_release: pmx_ts_release {
		mux {
		pins = "gpio21", "gpio22";
		function = "gpio";
		};

		config {
		pins = "gpio21", "gpio22";
		drive-strength = <2>;
		bias-disable;
		};
		};
		};

		/* Camera GPIOs CCI*/
		cci0_active: cci0_active {
		mux {
		/* CLK, DATA */
		pins = "gpio39", "gpio40";
		function = "CCI_I2C";
		};

		config {
		pins = "gpio39", "gpio40";
		bias-pull-up; /* PULL UP*/
		drive-strength = <2>; /* 2 MA */
		};
		};

		cci0_suspend: cci0_suspend {
		mux {
		/* CLK, DATA */
		pins = "gpio39", "gpio40";
		function = "CCI_I2C";
		};

		config {
		pins = "gpio39", "gpio40";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cci1_active: cci1_active {
		mux {
		/* CLK, DATA */
		pins = "gpio41", "gpio42";
		function = "CCI_I2C";
		};

		config {
		pins = "gpio41", "gpio42";
		bias-pull-up; /* PULL UP*/
		drive-strength = <2>; /* 2 MA */
		};
		};

		cci1_suspend: cci1_suspend {
		mux {
		/* CLK, DATA */
		pins = "gpio41", "gpio42";
		function = "CCI_I2C";
		};

		config {
		pins = "gpio41", "gpio42";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cci2_active: cci2_active {
		mux {
		/* CLK, DATA */
		pins = "gpio43", "gpio44";
		function = "CCI_I2C";
		};

		config {
		pins = "gpio43", "gpio44";
		bias-pull-up; /* PULL UP*/
		drive-strength = <2>; /* 2 MA */
		};
		};

		cci2_suspend: cci2_suspend {
		mux {
		/* CLK, DATA */
		pins = "gpio43", "gpio44";
		function = "CCI_I2C";
		};

		config {
		pins = "gpio43", "gpio44";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk0_active: cam_sensor_mclk0_active {
		/* MCLK 0*/
		mux {
		pins = "gpio29";
		function = "cam_mclk";
		};

		config {
		pins = "gpio29";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
		/* MCLK 0*/
		mux {
		pins = "gpio29";
		function = "cam_mclk";
		};

		config {
		pins = "gpio29";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk1_active: cam_sensor_mclk1_active {
		/* MCLK 1*/
		mux {
		pins = "gpio30";
		function = "cam_mclk";
		};

		config {
		pins = "gpio30";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
		/* MCLK 1*/
		mux {
		pins = "gpio30";
		function = "cam_mclk";
		};

		config {
		pins = "gpio30";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk2_active: cam_sensor_mclk2_active {
		/* MCLK 2*/
		mux {
		pins = "gpio31";
		function = "cam_mclk";
		};

		config {
		pins = "gpio31";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
		/* MCLK 2*/
		mux {
		pins = "gpio31";
		function = "cam_mclk";
		};

		config {
		pins = "gpio31";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk3_active: cam_sensor_mclk3_active {
		/* MCLK 3*/
		mux {
		pins = "gpio32";
		function = "cam_mclk";
		};

		config {
		pins = "gpio32";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
		/* MCLK 3*/
		mux {
		pins = "gpio32";
		function = "cam_mclk";
		};

		config {
		pins = "gpio32";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk4_active: cam_sensor_mclk4_active {
		/* MCLK 4*/
		mux {
		pins = "gpio33";
		function = "cam_mclk";
		};

		config {
		pins = "gpio33";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk4_suspend: cam_sensor_mclk4_suspend {
		/* MCLK 4*/
		mux {
		pins = "gpio33";
		function = "cam_mclk";
		};

		config {
		pins = "gpio33";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_rear0_reset_active: cam_sensor_rear0_reset_active {
		/* RESET0 */
		mux {
		pins = "gpio34";
		function = "gpio";
		};

		config {
		pins = "gpio34";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_rear0_reset_suspend: cam_sensor_rear0_reset_suspend {
		/* RESET0 */
		mux {
		pins = "gpio34";
		function = "gpio";
		};

		config {
		pins = "gpio34";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		output-low;
		};
		};

		cam_sensor_rear1_reset_active: cam_sensor_rear1_reset_active {
		/* RESET1 */
		mux {
		pins = "gpio35";
		function = "gpio";
		};

		config {
		pins = "gpio35";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_rear1_reset_suspend: cam_sensor_rear1_reset_suspend {
		/* RESET1 */
		mux {
		pins = "gpio35";
		function = "gpio";
		};

		config {
		pins = "gpio35";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		output-low;
		};
		};

		cam_sensor_rear2_reset_active: cam_sensor_rear2_reset_active {
		/* RESET2 */
		mux {
		pins = "gpio36";
		function = "gpio";
		};

		config {
		pins = "gpio36";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_rear2_reset_suspend: cam_sensor_rear2_reset_suspend {
		/* RESET2 */
		mux {
		pins = "gpio36";
		function = "gpio";
		};

		config {
		pins = "gpio36";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		output-low;
		};
		};

		cam_sensor_front0_reset_active: cam_sensor_front0_reset_active {
		/* RESET0 */
		mux {
		pins = "gpio37";
		function = "gpio";
		};

		config {
		pins = "gpio37";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_front0_reset_suspend: cam_sensor_front0_reset_suspend {
		/* RESET0 */
		mux {
		pins = "gpio37";
		function = "gpio";
		};

		config {
		pins = "gpio37";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		output-low;
		};
		};

		cam_sensor_reset4_active: cam_sensor_reset4_active {
		/* RESET4 */
		mux {
		pins = "gpio38";
		function = "gpio";
		};

		config {
		pins = "gpio38";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_reset4_suspend: cam_sensor_reset4_suspend {
		/* RESET4 */
		mux {
		pins = "gpio38";
		function = "gpio";
		};

		config {
		pins = "gpio38";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		output-low;
		};
		};

		pm8008_active: pm8008_active {
		mux {
		pins = "gpio58";
		function = "gpio";
		};

		config {
		pins = "gpio58";
		bias-pull-up;
		output-high;
		drive-strength = <2>;
		};
		};
		};
		};

qcom/blair.dtsi

+1 −3

Original line number	Diff line number	Diff line
		@@ -3346,7 +3346,7 @@
		};

		#include "holi-gpu.dtsi"
		#include "holi-pinctrl.dtsi"
		#include "blair-pinctrl.dtsi"
		#include "pm6350-rpm-regulator.dtsi"
		#include "pm6150l-rpm-regulator.dtsi"
		#include "holi-regulators.dtsi"
		@@ -3358,7 +3358,6 @@
		#include "holi-vidc.dtsi"
		#include "camera/holi-camera.dtsi"
		#include "holi-thermal.dtsi"
		#include "holi-pinctrl.dtsi"
		#include "holi-qupv3.dtsi"
		#include "display/holi-sde.dtsi"
		#include "holi-audio.dtsi"
		@@ -3425,4 +3424,3 @@
		};

		#include "msm-rdbg.dtsi"