dt-bindings: Adding pinctrl devicetree binding for Blair (887d4b7a) · Commits · e / devices / android_kernel_fairphone_FP5

bindings/pinctrl/qcom,blair-pinctrl.yaml

0 → 100644

+195 −0

Original line number	Diff line number	Diff line
		%YAML 1.2
		---
		$id: http://devicetree.org/schemas/bindings/pinctrl/qcom,blair-pinctrl.yaml#
		$schema: http://devicetree.org/meta-schemas/core.yaml#

		title: Qualcomm Technologies, Inc. BLAIR TLMM block

		description: \|
		This binding describes the Top Level Mode Multiplexer block found in the
		HOLI platform.

		properties:
		compatible:
		Usage: required
		Value type: <string>
		Definition: must be "qcom,blair-pinctrl"

		reg:
		Usage: required
		Value type: <prop-encoded-array>
		Definition: the base address and size of the TLMM register space.

		interrupts:
		Usage: required
		Value type: <prop-encoded-array>
		Definition: should specify the TLMM summary IRQ.

		interrupt-controller:
		Usage: required
		Value type: <none>
		Definition: identifies this node as an interrupt controller

		#interrupt-cells:
		Usage: required
		Value type: <u32>
		Definition: must be 2. Specifying the pin number and flags, as defined
		in <dt-bindings/interrupt-controller/irq.h>

		gpio-controller:
		Usage: required
		Value type: <none>
		Definition: identifies this node as a gpio controller

		#gpio-cells:
		Usage: required
		Value type: <u32>
		Definition: must be 2. Specifying the pin number and flags, as defined
		in <dt-bindings/gpio/gpio.h>

		wakeup-parent:
		Usage: optional
		Value type: <phandle>
		Definition: A phandle to the wakeup interrupt controller for the SoC.

		Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
		a general description of GPIO and interrupt bindings.

		Please refer to pinctrl-bindings.txt in this directory for details of the
		common pinctrl bindings used by client devices, including the meaning of the
		phrase "pin configuration node".

		The pin configuration nodes act as a container for an arbitrary number of
		subnodes. Each of these subnodes represents some desired configuration for a
		pin, a group, or a list of pins or groups. This configuration can include the
		mux function to select on those pin(s)/group(s), and various pin configuration
		parameters, such as pull-up, drive strength, etc.


		PIN CONFIGURATION NODES:

		The name of each subnode is not important; all subnodes should be enumerated
		and processed purely based on their content.

		Each subnode only affects those parameters that are explicitly listed. In
		other words, a subnode that lists a mux function but no pin configuration
		parameters implies no information about any pin configuration parameters.
		Similarly, a pin subnode that describes a pullup parameter implies no
		information about e.g. the mux function.


		The following generic properties as defined in pinctrl-bindings.txt are valid
		to specify in a pin configuration subnode:

		pins:
		Usage: required
		Value type: <string-array>
		Definition: List of gpio pins affected by the properties specified in
		this subnode.

		Valid pins:
		gpio0-gpio155
		Supports mux, bias and drive-strength

		sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd,
		sdc2_data sdc1_rclk
		Supports bias and drive-strength

		function:
		Usage: required
		Value type: <string>
		Definition: Specify the alternative function to be configured for the
		specified pins. Functions are only valid for gpio pins.
		Valid values:
		blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
		bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
		qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
		dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
		blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
		mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
		atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
		cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
		pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
		qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
		qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
		atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
		atest_usb20, atest_char0, dac_calib10, qdss_stm10,
		qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
		blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
		qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
		qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
		dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
		qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
		dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
		dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
		dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
		dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
		sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
		qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
		uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
		blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
		qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
		blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
		cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
		blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
		qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
		isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
		qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
		sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
		gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
		qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
		tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
		qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
		sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
		sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
		ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
		blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
		pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
		qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
		qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
		gpio

		bias-disable:
		Usage: optional
		Value type: <none>
		Definition: The specified pins should be configured as no pull.

		bias-pull-down:
		Usage: optional
		Value type: <none>
		Definition: The specified pins should be configured as pull down.

		bias-pull-up:
		Usage: optional
		Value type: <none>
		Definition: The specified pins should be configured as pull up.

		output-high:
		Usage: optional
		Value type: <none>
		Definition: The specified pins are configured in output mode, driven high.
		Not valid for sdc pins.

		output-low:
		Usage: optional
		Value type: <none>
		Definition: The specified pins are configured in output mode, driven low.
		Not valid for sdc pins.

		drive-strength:
		Usage: optional
		Value type: <u32>
		Definition: Selects the drive strength for the specified pins, in mA.
		Valid values: 2, 4, 6, 8, 10, 12, 14 and 16

		examples:
		- \|
		tlmm: pinctrl@400000 {
		compatible = "qcom,blair-pinctrl";
		reg = <0x400000 0x800000>;
		interrupts = <0 227 0>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
		};