Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit da0a5d99 authored by Daniel Mack's avatar Daniel Mack Committed by Sebastian Reichel
Browse files

dt-bindings: w1: document bindings for ds2760 battery monitor 



This patch adds the devicetree bindings for Maxim's ds2760 battery
monitors.

Signed-off-by: default avatarDaniel Mack <daniel@zonque.org>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarSebastian Reichel <sebastian.reichel@collabora.co.uk>
parent dfa32e11

Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt

0 → 100644
+26 −0
Original line number Diff line number Diff line 
Devicetree bindings for Maxim DS2760

====================================



The ds2760 is a w1 slave device and must hence have its sub-node in DT

under a w1 bus master node.



The device exposes a power supply, so the details described in

Documentation/devicetree/bindings/power/supply/power_supply.txt apply.



Required properties:

- compatible: must be "maxim,ds2760"



Optional properties:

- power-supplies:	Refers to one or more power supplies connected to

			this battery.

- maxim,pmod-enabled:	This boolean property enables the DS2760 to enter

			sleep mode when the DQ line goes low for greater

			than 2 seconds and leave sleep Mode when the DQ

			line goes high.

- maxim,cache-time-ms:	Time im milliseconds to cache the data for. When

			this time expires, the values are read again from

			the hardware. Defaults to 1000.

- rated-capacity-microamp-hours:

			The rated capacity of the battery, in mAh.

			If not specified, the value stored in the

			non-volatile chip memory is used.