Merge branch 'am33xx' into omap-for-v3.11/cleanup

      fix_the_problem(ucp->dar);

      fix_the_problem(ucp->dar);

    }

    }

When in an active transaction that takes a signal, we need to be careful with

the stack.  It's possible that the stack has moved back up after the tbegin.

The obvious case here is when the tbegin is called inside a function that

returns before a tend.  In this case, the stack is part of the checkpointed

transactional memory state.  If we write over this non transactionally or in

suspend, we are in trouble because if we get a tm abort, the program counter and

stack pointer will be back at the tbegin but our in memory stack won't be valid

anymore.

To avoid this, when taking a signal in an active transaction, we need to use

the stack pointer from the checkpointed state, rather than the speculated

state.  This ensures that the signal context (written tm suspended) will be

written below the stack required for the rollback.  The transaction is aborted

becuase of the treclaim, so any memory written between the tbegin and the

signal will be rolled back anyway.

For signals taken in non-TM or suspended mode, we use the

normal/non-checkpointed stack pointer.

Failure cause codes used by kernel

Failure cause codes used by kernel

==================================

==================================

kernel aborted a transaction:

kernel aborted a transaction:

 TM_CAUSE_RESCHED       Thread was rescheduled.

 TM_CAUSE_RESCHED       Thread was rescheduled.

 TM_CAUSE_TLBI          Software TLB invalide.

 TM_CAUSE_FAC_UNAV      FP/VEC/VSX unavailable trap.

 TM_CAUSE_FAC_UNAV      FP/VEC/VSX unavailable trap.

 TM_CAUSE_SYSCALL       Currently unused; future syscalls that must abort

 TM_CAUSE_SYSCALL       Currently unused; future syscalls that must abort

                        transactions for consistency will use this.

                        transactions for consistency will use this.

 TM_CAUSE_SIGNAL        Signal delivered.

 TM_CAUSE_SIGNAL        Signal delivered.

 TM_CAUSE_MISC          Currently unused.

 TM_CAUSE_MISC          Currently unused.

 TM_CAUSE_ALIGNMENT     Alignment fault.

 TM_CAUSE_EMULATE       Emulation that touched memory.

These can be checked by the user program's abort handler as TEXASR[0:7].

These can be checked by the user program's abort handler as TEXASR[0:7].  If

bit 7 is set, it indicates that the error is consider persistent.  For example

a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.q

GDB

GDB

===

===

F:	drivers/net/wan/sdla.c

F:	drivers/net/wan/sdla.c

FRAMEBUFFER LAYER

FRAMEBUFFER LAYER

M:	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>

M:	Tomi Valkeinen <tomi.valkeinen@ti.com>

L:	linux-fbdev@vger.kernel.org

L:	linux-fbdev@vger.kernel.org

W:	http://linux-fbdev.sourceforge.net/

W:	http://linux-fbdev.sourceforge.net/

Q:	http://patchwork.kernel.org/project/linux-fbdev/list/

Q:	http://patchwork.kernel.org/project/linux-fbdev/list/

T:	git git://github.com/schandinat/linux-2.6.git fbdev-next

T:	git git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev.git

S:	Maintained

S:	Maintained

F:	Documentation/fb/

F:	Documentation/fb/

F:	Documentation/devicetree/bindings/fb/

F:	Documentation/devicetree/bindings/fb/

T:	git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git

T:	git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git

S:	Maintained

S:	Maintained

F:	arch/parisc/

F:	arch/parisc/

F:	Documentation/parisc/

F:	drivers/parisc/

F:	drivers/parisc/

F:	drivers/char/agp/parisc-agp.c

F:	drivers/input/serio/gscps2.c

F:	drivers/parport/parport_gsc.*

F:	drivers/tty/serial/8250/8250_gsc.c

F:	drivers/video/sti*

F:	drivers/video/console/sti*

F:	drivers/video/logo/logo_parisc*

PC87360 HARDWARE MONITORING DRIVER

PC87360 HARDWARE MONITORING DRIVER

M:	Jim Cromie <jim.cromie@gmail.com>

M:	Jim Cromie <jim.cromie@gmail.com>

VERSION = 3

VERSION = 3

PATCHLEVEL = 10

PATCHLEVEL = 10

SUBLEVEL = 0

SUBLEVEL = 0

EXTRAVERSION = -rc3

EXTRAVERSION = -rc4

NAME = Unicycling Gorilla

NAME = Unicycling Gorilla

# *DOCUMENTATION*

# *DOCUMENTATION*

		clock-names = "usbhost";

		clock-names = "usbhost";

	};

	};

	usbphy@12130000 {

		compatible = "samsung,exynos5250-usb2phy";

		reg = <0x12130000 0x100>;

		clocks = <&clock 1>, <&clock 285>;

		clock-names = "ext_xtal", "usbhost";

		#address-cells = <1>;

		#size-cells = <1>;

		ranges;

		usbphy-sys {

			reg = <0x10040704 0x8>,

			      <0x10050230 0x4>;

		};

	};

	amba {

	amba {

		#address-cells = <1>;

		#address-cells = <1>;

		#size-cells = <1>;

		#size-cells = <1>;

CONFIG_EXPERIMENTAL=y

CONFIG_SYSVIPC=y

CONFIG_NO_HZ=y

CONFIG_NO_HZ=y

CONFIG_HIGH_RES_TIMERS=y

CONFIG_HIGH_RES_TIMERS=y

CONFIG_BLK_DEV_INITRD=y

CONFIG_BLK_DEV_INITRD=y

CONFIG_MODULE_UNLOAD=y

CONFIG_MODULE_UNLOAD=y

# CONFIG_BLK_DEV_BSG is not set

# CONFIG_BLK_DEV_BSG is not set

CONFIG_PARTITION_ADVANCED=y

CONFIG_PARTITION_ADVANCED=y

CONFIG_EFI_PARTITION=y

CONFIG_ARCH_EXYNOS=y

CONFIG_ARCH_EXYNOS=y

CONFIG_S3C_LOWLEVEL_UART_PORT=1

CONFIG_S3C_LOWLEVEL_UART_PORT=3

CONFIG_S3C24XX_PWM=y

CONFIG_S3C24XX_PWM=y

CONFIG_ARCH_EXYNOS5=y

CONFIG_ARCH_EXYNOS5=y

CONFIG_MACH_EXYNOS4_DT=y

CONFIG_MACH_EXYNOS4_DT=y

CONFIG_MACH_EXYNOS5_DT=y

CONFIG_SMP=y

CONFIG_SMP=y

CONFIG_NR_CPUS=2

CONFIG_NR_CPUS=2

CONFIG_PREEMPT=y

CONFIG_PREEMPT=y

CONFIG_AEABI=y

CONFIG_AEABI=y

CONFIG_HIGHMEM=y

CONFIG_ZBOOT_ROM_TEXT=0x0

CONFIG_ZBOOT_ROM_BSS=0x0

CONFIG_ARM_APPENDED_DTB=y

CONFIG_ARM_APPENDED_DTB=y

CONFIG_ARM_ATAG_DTB_COMPAT=y

CONFIG_ARM_ATAG_DTB_COMPAT=y

CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"

CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"

CONFIG_INET=y

CONFIG_INET=y

CONFIG_RFKILL_REGULATOR=y

CONFIG_RFKILL_REGULATOR=y

CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"

CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"

CONFIG_DEVTMPFS=y

CONFIG_DEVTMPFS_MOUNT=y

CONFIG_PROC_DEVICETREE=y

CONFIG_PROC_DEVICETREE=y

CONFIG_BLK_DEV_LOOP=y

CONFIG_BLK_DEV_LOOP=y

CONFIG_BLK_DEV_CRYPTOLOOP=y

CONFIG_BLK_DEV_RAM=y

CONFIG_BLK_DEV_RAM=y

CONFIG_BLK_DEV_RAM_SIZE=8192

CONFIG_BLK_DEV_RAM_SIZE=8192

CONFIG_SCSI=y

CONFIG_SCSI=y

CONFIG_BLK_DEV_SD=y

CONFIG_BLK_DEV_SD=y

CONFIG_CHR_DEV_SG=y

CONFIG_CHR_DEV_SG=y

CONFIG_MD=y

CONFIG_BLK_DEV_DM=y

CONFIG_DM_CRYPT=m

CONFIG_NETDEVICES=y

CONFIG_NETDEVICES=y

CONFIG_SMSC911X=y

CONFIG_SMSC911X=y

CONFIG_USB_USBNET=y

CONFIG_USB_USBNET=y

CONFIG_USB_NET_SMSC75XX=y

CONFIG_USB_NET_SMSC75XX=y

CONFIG_USB_NET_SMSC95XX=y

CONFIG_USB_NET_SMSC95XX=y

CONFIG_INPUT_EVDEV=y

CONFIG_INPUT_EVDEV=y

# CONFIG_INPUT_KEYBOARD is not set

CONFIG_KEYBOARD_CROS_EC=y

# CONFIG_INPUT_MOUSE is not set

# CONFIG_MOUSE_PS2 is not set

CONFIG_MOUSE_CYAPA=y

CONFIG_INPUT_TOUCHSCREEN=y

CONFIG_INPUT_TOUCHSCREEN=y

CONFIG_SERIAL_8250=y

CONFIG_SERIAL_8250=y

CONFIG_SERIAL_SAMSUNG=y

CONFIG_SERIAL_SAMSUNG=y

CONFIG_SERIAL_SAMSUNG_CONSOLE=y

CONFIG_SERIAL_SAMSUNG_CONSOLE=y

CONFIG_SERIAL_OF_PLATFORM=y

CONFIG_SERIAL_OF_PLATFORM=y

CONFIG_HW_RANDOM=y

CONFIG_HW_RANDOM=y

CONFIG_TCG_TPM=y

CONFIG_TCG_TIS_I2C_INFINEON=y

CONFIG_I2C=y

CONFIG_I2C=y

CONFIG_I2C_MUX=y

CONFIG_I2C_ARB_GPIO_CHALLENGE=y

CONFIG_I2C_S3C2410=y

CONFIG_DEBUG_GPIO=y

# CONFIG_HWMON is not set

# CONFIG_HWMON is not set

CONFIG_MFD_CROS_EC=y

CONFIG_MFD_CROS_EC_I2C=y

CONFIG_MFD_MAX77686=y

CONFIG_MFD_MAX8997=y

CONFIG_MFD_SEC_CORE=y

CONFIG_MFD_TPS65090=y

CONFIG_MFD_TPS65090=y

CONFIG_REGULATOR=y

CONFIG_REGULATOR=y

CONFIG_REGULATOR_FIXED_VOLTAGE=y

CONFIG_REGULATOR_FIXED_VOLTAGE=y

CONFIG_REGULATOR_GPIO=y

CONFIG_REGULATOR_GPIO=y

CONFIG_REGULATOR_MAX8997=y

CONFIG_REGULATOR_MAX77686=y

CONFIG_REGULATOR_S5M8767=y

CONFIG_REGULATOR_TPS65090=y

CONFIG_REGULATOR_TPS65090=y

CONFIG_FB=y

CONFIG_FB=y

CONFIG_FB_MODE_HELPERS=y

CONFIG_FB_SIMPLE=y

CONFIG_EXYNOS_VIDEO=y

CONFIG_EXYNOS_VIDEO=y

CONFIG_EXYNOS_MIPI_DSI=y

CONFIG_EXYNOS_MIPI_DSI=y

CONFIG_EXYNOS_DP=y

CONFIG_EXYNOS_DP=y

CONFIG_FONT_7x14=y

CONFIG_FONT_7x14=y

CONFIG_LOGO=y

CONFIG_LOGO=y

CONFIG_USB=y

CONFIG_USB=y

CONFIG_USB_EHCI_HCD=y

CONFIG_USB_EHCI_S5P=y

CONFIG_USB_STORAGE=y

CONFIG_USB_DWC3=y

CONFIG_USB_PHY=y

CONFIG_SAMSUNG_USB2PHY=y

CONFIG_SAMSUNG_USB3PHY=y

CONFIG_MMC=y

CONFIG_MMC_SDHCI=y

CONFIG_MMC_SDHCI_S3C=y

CONFIG_MMC_DW=y

CONFIG_MMC_DW_IDMAC=y

CONFIG_MMC_DW_EXYNOS=y

CONFIG_COMMON_CLK_MAX77686=y

CONFIG_EXT2_FS=y

CONFIG_EXT2_FS=y

CONFIG_EXT3_FS=y

CONFIG_EXT3_FS=y

CONFIG_EXT4_FS=y

CONFIG_EXT4_FS=y

CONFIG_NLS_CODEPAGE_437=y

CONFIG_NLS_CODEPAGE_437=y

CONFIG_NLS_ASCII=y

CONFIG_NLS_ASCII=y

CONFIG_NLS_ISO8859_1=y

CONFIG_NLS_ISO8859_1=y

CONFIG_PRINTK_TIME=y

CONFIG_MAGIC_SYSRQ=y

CONFIG_MAGIC_SYSRQ=y

CONFIG_DEBUG_KERNEL=y

CONFIG_DEBUG_KERNEL=y

CONFIG_DETECT_HUNG_TASK=y

CONFIG_DETECT_HUNG_TASK=y

CONFIG_DEBUG_MUTEXES=y

CONFIG_DEBUG_MUTEXES=y

CONFIG_DEBUG_INFO=y

CONFIG_DEBUG_INFO=y

CONFIG_DEBUG_USER=y

CONFIG_DEBUG_USER=y

CONFIG_DEBUG_LL=y

CONFIG_CRYPTO_SHA256=y

CONFIG_EARLY_PRINTK=y

CONFIG_CRC_CCITT=y

CONFIG_CRC_CCITT=y