Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit afad1f57 authored by Udipto Goswami's avatar Udipto Goswami
Browse files

ARM: dts: msm: Add secondary controller USB nodes for Yupik 

Add secondary controller nodes to support usb on peripheral
mode for Yupik.

Change-Id: Ic8a80b80e7b733f41dec5ced52978060777d7504
parent 4b0e28bd

qcom/yupik-rumi.dtsi

+25 −0
Original line number Diff line number Diff line
@@ -28,6 +28,21 @@ 
				     0x0 0x4>;

	};



	usb_emu_phy_1: usb_emu_phy@8c0e000 {

		compatible = "qcom,usb-emu-phy";

		reg = <0x08c0e000 0x9500>;



		qcom,emu-init-seq = <0xffff 0x4

				     0xfff0 0x4

				     0x100000 0x20

				     0x0 0x20

				     0x101f0 0x20

				     0x100000 0x3c

				     0x0 0x3c

				     0x10060 0x3c

				     0x0 0x4>;

	};



	bi_tcxo: bi_tcxo {

		compatible = "fixed-factor-clock";

		clock-mult = <1>;
@@ -43,6 +58,7 @@ 
		clocks = <&xo_board>;

		#clock-cells = <0>;

	};



};



&usb0 {
@@ -54,6 +70,15 @@ 
	};

};



&usb1 {

	/delete-property/ extcon;

	dwc3@8c00000 {

		usb-phy = <&usb_emu_phy_1>, <&usb_nop_phy>;

		maximum-speed = "high-speed";

		dr_mode = "peripheral";

	};

};



&sdhc_1 {

	status = "disabled";

qcom/yupik-usb.dtsi

+62 −1
Original line number Diff line number Diff line
@@ -45,7 +45,7 @@ 


		dwc3@a600000 {

			compatible = "snps,dwc3";

			reg = <0xa600000 0xcd00>;

			reg = <0xa600000 0xe000>;

			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;

			linux,sysdev_is_parent;

			snps,disable-clk-gating;
@@ -62,6 +62,67 @@ 
		};

	};



	usb1: hsusb@8c00000 {

		status = "disabled";

		compatible = "qcom,dwc-usb3-msm";

		reg = <0x8c00000 0x100000>;

		reg-names = "core_base";



		#address-cells = <1>;

		#size-cells = <1>;

		ranges;



		interrupts-extended = <&pdc 12 IRQ_TYPE_EDGE_RISING>,

			     <&intc GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,

			     <&pdc 13 IRQ_TYPE_EDGE_RISING>;

		interrupt-names = "dp_hs_phy_irq", "pwr_event_irq",

				"dm_hs_phy_irq";

		qcom,use-pdc-interrupts;



		USB3_GDSC-supply = <&gcc_usb30_sec_gdsc>;

		clocks = <&gcc GCC_USB30_SEC_MASTER_CLK>,

			<&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,

			<&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,

			<&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,

			<&gcc GCC_USB30_SEC_SLEEP_CLK>;

		clock-names = "core_clk", "iface_clk","bus_aggr_clk",

					"utmi_clk", "sleep_clk";



		resets = <&gcc GCC_USB30_SEC_BCR>;

		reset-names = "core_reset";



		qcom,core-clk-rate = <120000000>;

		qcom,core-clk-rate-hs = <66666667>;

		qcom,num-gsi-evt-buffs = <0x3>;

		qcom,gsi-reg-offset =

			<0x0fc /* GSI_GENERAL_CFG */

			0x110 /* GSI_DBL_ADDR_L */

			0x120 /* GSI_DBL_ADDR_H */

			0x130 /* GSI_RING_BASE_ADDR_L */

			0x144 /* GSI_RING_BASE_ADDR_H */

			0x1a4>; /* GSI_IF_STS */

		qcom,dwc-usb3-msm-tx-fifo-size = <21288>;



		dwc3@8c00000 {

			compatible = "snps,dwc3";

			reg = <0x8c00000 0xe000>;

			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;

			linux,sysdev_is_parent;

			snps,disable-clk-gating;

			snps,has-lpm-erratum;

			snps,hird-threshold = /bits/ 8 <0x0>;

			snps,is-utmi-l1-suspend;

			snps,dis-u1-entry-quirk;

			snps,dis-u2-entry-quirk;

			snps,dis_u2_susphy_quirk;

			snps,dis_enblslpm_quirk;

			tx-fifo-resize;

			maximum-speed = "high-speed";

			dr_mode = "otg";

		};

	};





	usb_nop_phy: usb_nop_phy {

		compatible = "usb-nop-xceiv";

	};