ARM: dts: msm: Add dtsi nodes for i2c, spi and hsuart

#include "sdxnightjar-pinctrl.dtsi"

/ {

	aliases {

		i2c1 = &i2c_1;

		i2c2 = &i2c_2;

		i2c3 = &i2c_3;

		i2c4 = &i2c_4;

		spi1 = &spi_1;

		spi2 = &spi_2;

		spi3 = &spi_3;

		spi4 = &spi_4;

	};

};

&soc {

	dma_blsp1: qcom,sps-dma@0x7884000 { /* BLSP1 */

		#dma-cells = <4>;

		compatible = "qcom,sps-dma";

		reg = <0x7884000 0x23000>;

		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>;

		qcom,summing-threshold = <0x10>;

	};

	i2c_1: i2c@78b5000 { /* BLSP1 QUP1 gpios 2,3 */

		compatible = "qcom,i2c-msm-v2";

		#address-cells = <1>;

		#size-cells = <0>;

		reg-names = "qup_phys_addr";

		reg = <0x78b5000 0x600>;

		interrupt-names = "qup_irq";

		interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;

		dmas = <&dma_blsp1 8 64 0x20000020 0x20>,

			<&dma_blsp1 9 32 0x20000020 0x20>;

		dma-names = "tx", "rx";

		qcom,master-id = <86>;

		qcom,clk-freq-out = <400000>;

		qcom,clk-freq-in  = <19200000>;

		clock-names = "iface_clk", "core_clk";

		clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>,

			 <&clock_gcc clk_gcc_blsp1_qup1_i2c_apps_clk>;

		pinctrl-names = "i2c_active", "i2c_sleep";

		pinctrl-0 = <&i2c_1_active>;

		pinctrl-1 = <&i2c_1_sleep>;

		status = "disabled";

	};

	i2c_2: i2c@78B6000 { /* BLSP1 QUP2 gpios 6,7 */

		compatible = "qcom,i2c-msm-v2";

		#address-cells = <1>;

		#size-cells = <0>;

		reg-names = "qup_phys_addr";

		reg = <0x78B6000 0x600>;

		interrupt-names = "qup_irq";

		interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;

		dmas = <&dma_blsp1 10 64 0x20000020 0x20>,

			<&dma_blsp1 11 32 0x20000020 0x20>;

		dma-names = "tx", "rx";

		qcom,master-id = <86>;

		qcom,clk-freq-out = <400000>;

		qcom,clk-freq-in  = <19200000>;

		clock-names = "iface_clk", "core_clk";

		clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>,

			 <&clock_gcc clk_gcc_blsp1_qup2_i2c_apps_clk>;

		pinctrl-names = "i2c_active", "i2c_sleep";

		pinctrl-0 = <&i2c_2_active>;

		pinctrl-1 = <&i2c_2_sleep>;

		status = "disabled";

	};

	i2c_3: i2c@78B7000 { /* BLSP1 QUP3 gpios 10, 11 */

		compatible = "qcom,i2c-msm-v2";

		#address-cells = <1>;

		#size-cells = <0>;

		reg-names = "qup_phys_addr";

		reg = <0x78B7000 0x600>;

		interrupt-names = "qup_irq";

		interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;

		dmas = <&dma_blsp1 12 64 0x20000020 0x20>,

			<&dma_blsp1 13 32 0x20000020 0x20>;

		dma-names = "tx", "rx";

		qcom,master-id = <86>;

		qcom,clk-freq-out = <400000>;

		qcom,clk-freq-in  = <19200000>;

		clock-names = "iface_clk", "core_clk";

		clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>,

			 <&clock_gcc clk_gcc_blsp1_qup3_i2c_apps_clk>;

		pinctrl-names = "i2c_active", "i2c_sleep";

		pinctrl-0 = <&i2c_3_active>;

		pinctrl-1 = <&i2c_3_sleep>;

		status = "disabled";

	};

	i2c_4: i2c@78B8000 { /* BLSP1 QUP4 gpios 14, 15 */

		compatible = "qcom,i2c-msm-v2";

		#address-cells = <1>;

		#size-cells = <0>;

		reg-names = "qup_phys_addr";

		reg = <0x78B8000 0x600>;

		interrupt-names = "qup_irq";

		interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;

		dmas = <&dma_blsp1 14 64 0x20000020 0x20>,

			<&dma_blsp1 15 32 0x20000020 0x20>;

		dma-names = "tx", "rx";

		qcom,master-id = <86>;

		qcom,clk-freq-out = <400000>;

		qcom,clk-freq-in  = <19200000>;

		clock-names = "iface_clk", "core_clk";

		clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>,

			 <&clock_gcc clk_gcc_blsp1_qup4_i2c_apps_clk>;

		pinctrl-names = "i2c_active", "i2c_sleep";

		pinctrl-0 = <&i2c_4_active>;

		pinctrl-1 = <&i2c_4_sleep>;

		status = "disabled";

	};

	spi_1: spi@78B5000 { /* BLSP1 QUP1 gpios 0, 1, 2, 3 */

		compatible = "qcom,spi-qup-v2";

		#address-cells = <1>;

		#size-cells = <0>;

		reg-names = "spi_physical", "spi_bam_physical";

		reg = <0x078B5000 0x600>,

		      <0x7884000 0x23000>;

		interrupt-names = "spi_irq", "spi_bam_irq";

		interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>,

				<0 238 IRQ_TYPE_LEVEL_HIGH>;

		spi-max-frequency = <19200000>;

		qcom,use-bam;

		qcom,ver-reg-exists;

		qcom,bam-consumer-pipe-index = <8>;

		qcom,bam-producer-pipe-index = <9>;

		qcom,master-id = <86>;

		qcom,use-pinctrl;

		pinctrl-names = "spi_default", "spi_sleep";

		pinctrl-0 = <&spi_1_active>;

		pinctrl-1 = <&spi_1_sleep>;

		clock-names = "iface_clk", "core_clk";

		clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>,

			 <&clock_gcc clk_gcc_blsp1_qup1_spi_apps_clk>;

		status = "disabled";

	};

	spi_2: spi@78B6000 { /* BLSP1 QUP2 gpios 4, 5, 6, 7 */

		compatible = "qcom,spi-qup-v2";

		#address-cells = <1>;

		#size-cells = <0>;

		reg-names = "spi_physical", "spi_bam_physical";

		reg = <0x78B6000 0x600>,

		      <0x7884000 0x23000>;

		interrupt-names = "spi_irq", "spi_bam_irq";

		interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>,

				<0 238 IRQ_TYPE_LEVEL_HIGH>;

		spi-max-frequency = <19200000>;

		qcom,use-bam;

		qcom,ver-reg-exists;

		qcom,bam-consumer-pipe-index = <10>;

		qcom,bam-producer-pipe-index = <11>;

		qcom,master-id = <86>;

		qcom,use-pinctrl;

		pinctrl-names = "spi_default", "spi_sleep";

		pinctrl-0 = <&spi_2_active>;

		pinctrl-1 = <&spi_2_sleep>;

		clock-names = "iface_clk", "core_clk";

		clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>,

			 <&clock_gcc clk_gcc_blsp1_qup2_spi_apps_clk>;

		status = "disabled";

	};

	spi_3: spi@78B7000 { /* BLSP1 QUP3 gpios 8, 9, 10, 11 */

		compatible = "qcom,spi-qup-v2";

		#address-cells = <1>;

		#size-cells = <0>;

		reg-names = "spi_physical", "spi_bam_physical";

		reg = <0x078B7000 0x600>,

		      <0x7884000 0x23000>;

		interrupt-names = "spi_irq", "spi_bam_irq";

		interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>,

				<0 238 IRQ_TYPE_LEVEL_HIGH>;

		spi-max-frequency = <19200000>;

		qcom,use-bam;

		qcom,ver-reg-exists;

		qcom,bam-consumer-pipe-index = <12>;

		qcom,bam-producer-pipe-index = <13>;

		qcom,master-id = <86>;

		qcom,use-pinctrl;

		pinctrl-names = "spi_default", "spi_sleep";

		pinctrl-0 = <&spi_3_active>;

		pinctrl-1 = <&spi_3_sleep>;

		clock-names = "iface_clk", "core_clk";

		clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>,

			 <&clock_gcc clk_gcc_blsp1_qup3_spi_apps_clk>;

		status = "disabled";

	};

	spi_4: spi@78B8000 { /* BLSP1 QUP4 gpios 16, 17, 18, 19 */

		compatible = "qcom,spi-qup-v2";

		#address-cells = <1>;

		#size-cells = <0>;

		reg-names = "spi_physical", "spi_bam_physical";

		reg = <0x078B8000 0x600>,

		      <0x7884000 0x23000>;

		interrupt-names = "spi_irq", "spi_bam_irq";

		interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>,

				<0 238 IRQ_TYPE_LEVEL_HIGH>;

		spi-max-frequency = <19200000>;

		qcom,use-bam;

		qcom,ver-reg-exists;

		qcom,bam-consumer-pipe-index = <14>;

		qcom,bam-producer-pipe-index = <15>;

		qcom,master-id = <86>;

		qcom,use-pinctrl;

		pinctrl-names = "spi_default", "spi_sleep";

		pinctrl-0 = <&spi_4_active>;

		pinctrl-1 = <&spi_4_sleep>;

		clock-names = "iface_clk", "core_clk";

		clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>,

			 <&clock_gcc clk_gcc_blsp1_qup4_spi_apps_clk>;

		status = "disabled";

	};

	blsp1_uart1_hs: uart@78AF000 { /* BLSP1 UART1 gpios 0, 1, 2, 3 */

		compatible = "qcom,msm-hsuart-v14";

		reg = <0x78AF000 0x200>,

		    <0x7884000 0x23000>;

		reg-names = "core_mem", "bam_mem";

		interrupt-names = "core_irq", "bam_irq", "wakeup_irq";

		#address-cells = <0>;

		interrupt-parent = <&blsp1_uart1_hs>;

		interrupts = <0 1 2>;

		#interrupt-cells = <1>;

		interrupt-map-mask = <0xffffffff>;

		interrupt-map = <0 &intc 0 107 IRQ_TYPE_LEVEL_HIGH

			    1 &intc 0 238 IRQ_TYPE_LEVEL_HIGH

			    2 &tlmm_pinmux 1 IRQ_TYPE_LEVEL_HIGH>;

		qcom,inject-rx-on-wakeup;

		qcom,rx-char-to-inject = <0xFD>;

		qcom,bam-tx-ep-pipe-index = <0>;

		qcom,bam-rx-ep-pipe-index = <1>;

		qcom,master-id = <86>;

		clock-names = "core_clk", "iface_clk";

		clocks = <&clock_gcc clk_gcc_blsp1_uart1_apps_clk>,

		    <&clock_gcc clk_gcc_blsp1_ahb_clk>;

		pinctrl-names = "sleep", "default";

		pinctrl-0 = <&blsp1_uart1_sleep>;

		pinctrl-1 = <&blsp1_uart1_active>;

		interconnect-names = "blsp-ddr";

		interconnects = <&system_noc MASTER_BLSP_1 &mc_virt SLAVE_EBI_CH0>;

		status = "disabled";

	};

	blsp1_uart2_hs: uart@78B0000 { /* BLSP1 UART2 gpios 4, 5, 6, 7 */

		compatible = "qcom,msm-hsuart-v14";

		reg = <0x78B0000 0x200>,

		    <0x7884000 0x23000>;

		reg-names = "core_mem", "bam_mem";

		interrupt-names = "core_irq", "bam_irq", "wakeup_irq";

		#address-cells = <0>;

		interrupt-parent = <&blsp1_uart2_hs>;

		interrupts = <0 1 2>;

		#interrupt-cells = <1>;

		interrupt-map-mask = <0xffffffff>;

		interrupt-map = <0 &intc 0 108 IRQ_TYPE_LEVEL_HIGH

			    1 &intc 0 238 IRQ_TYPE_LEVEL_HIGH

			    2 &tlmm_pinmux 5 IRQ_TYPE_LEVEL_HIGH>;

		qcom,inject-rx-on-wakeup;

		qcom,rx-char-to-inject = <0xFD>;

		qcom,bam-tx-ep-pipe-index = <2>;

		qcom,bam-rx-ep-pipe-index = <3>;

		qcom,master-id = <86>;

		clock-names = "core_clk", "iface_clk";

		clocks = <&clock_gcc clk_gcc_blsp1_uart2_apps_clk>,

		    <&clock_gcc clk_gcc_blsp1_ahb_clk>;

		pinctrl-names = "sleep", "default";

		pinctrl-0 = <&blsp1_uart2_sleep>;

		pinctrl-1 = <&blsp1_uart2_active>;

		interconnect-names = "blsp-ddr";

		interconnects = <&system_noc MASTER_BLSP_1 &mc_virt SLAVE_EBI_CH0>;

		status = "disabled";

	};

	blsp1_uart3_hs: uart@78B1000 { /* BLSP1 UART3 gpios 8, 9, 10, 11 */

		compatible = "qcom,msm-hsuart-v14";

		reg = <0x78B1000 0x200>,

		    <0x7884000 0x23000>;

		reg-names = "core_mem", "bam_mem";

		interrupt-names = "core_irq", "bam_irq", "wakeup_irq";

		#address-cells = <0>;

		interrupt-parent = <&blsp1_uart3_hs>;

		interrupts = <0 1 2>;

		#interrupt-cells = <1>;

		interrupt-map-mask = <0xffffffff>;

		interrupt-map = <0 &intc 0 109 IRQ_TYPE_LEVEL_HIGH

			    1 &intc 0 238 IRQ_TYPE_LEVEL_HIGH

			    2 &tlmm_pinmux 9 IRQ_TYPE_LEVEL_HIGH>;

		qcom,inject-rx-on-wakeup;

		qcom,rx-char-to-inject = <0xFD>;

		qcom,bam-tx-ep-pipe-index = <4>;

		qcom,bam-rx-ep-pipe-index = <5>;

		qcom,master-id = <86>;

		clock-names = "core_clk", "iface_clk";

		clocks = <&clock_gcc clk_gcc_blsp1_uart3_apps_clk>,

		    <&clock_gcc clk_gcc_blsp1_ahb_clk>;

		pinctrl-names = "sleep", "default";

		pinctrl-0 = <&blsp1_uart3_sleep>;

		pinctrl-1 = <&blsp1_uart3_active>;

		interconnect-names = "blsp-ddr";

		interconnects = <&system_noc MASTER_BLSP_1 &mc_virt SLAVE_EBI_CH0>;

		status = "disabled";

	};

	blsp1_uart4a_hs: uarta@78B2000 { /* BLSP1 UART4 gpios 12, 13, 14, 15*/

		compatible = "qcom,msm-hsuart-v14";

		reg = <0x78B2000 0x200>,

		    <0x7884000 0x23000>;

		reg-names = "core_mem", "bam_mem";

		interrupt-names = "core_irq", "bam_irq", "wakeup_irq";

		#address-cells = <0>;

		interrupt-parent = <&blsp1_uart4a_hs>;

		interrupts = <0 1 2>;

		#interrupt-cells = <1>;

		interrupt-map-mask = <0xffffffff>;

		interrupt-map = <0 &intc 0 110 IRQ_TYPE_LEVEL_HIGH

			    1 &intc 0 238 IRQ_TYPE_LEVEL_HIGH

			    2 &tlmm_pinmux 13 IRQ_TYPE_LEVEL_HIGH>;

		qcom,inject-rx-on-wakeup;

		qcom,rx-char-to-inject = <0xFD>;

		qcom,bam-tx-ep-pipe-index = <6>;

		qcom,bam-rx-ep-pipe-index = <7>;

		qcom,master-id = <86>;

		clock-names = "core_clk", "iface_clk";

		clocks = <&clock_gcc clk_gcc_blsp1_uart4_apps_clk>,

		    <&clock_gcc clk_gcc_blsp1_ahb_clk>;

		pinctrl-names = "sleep", "default";

		pinctrl-0 = <&blsp1_uart4_sleep>;

		pinctrl-1 = <&blsp1_uart4_active>;

		interconnect-names = "blsp-ddr";

		interconnects = <&system_noc MASTER_BLSP_1 &mc_virt SLAVE_EBI_CH0>;

		status = "disabled";

	};

	blsp1_uart4b_hs: uartb@78B2000 { /* BLSP1 UART4b gpios 16, 17, 18, 19*/

		compatible = "qcom,msm-hsuart-v14";

		reg = <0x78B2000 0x200>,

		    <0x7884000 0x23000>;

		reg-names = "core_mem", "bam_mem";

		interrupt-names = "core_irq", "bam_irq", "wakeup_irq";

		#address-cells = <0>;

		interrupt-parent = <&blsp1_uart4b_hs>;

		interrupts = <0 1 2>;

		#interrupt-cells = <1>;

		interrupt-map-mask = <0xffffffff>;

		interrupt-map = <0 &intc 0 110 IRQ_TYPE_LEVEL_HIGH

			    1 &intc 0 238 IRQ_TYPE_LEVEL_HIGH

			    2 &tlmm_pinmux 17 IRQ_TYPE_LEVEL_HIGH>;

		qcom,inject-rx-on-wakeup;

		qcom,rx-char-to-inject = <0xFD>;

		qcom,bam-tx-ep-pipe-index = <6>;

		qcom,bam-rx-ep-pipe-index = <7>;

		qcom,master-id = <86>;

		clock-names = "core_clk", "iface_clk";

		clocks = <&clock_gcc clk_gcc_blsp1_uart4_apps_clk>,

		    <&clock_gcc clk_gcc_blsp1_ahb_clk>;

		pinctrl-names = "sleep", "default";

		pinctrl-0 = <&blsp1_uart4b_sleep>;

		pinctrl-1 = <&blsp1_uart4b_active>;

		interconnect-names = "blsp-ddr";

		interconnects = <&system_noc MASTER_BLSP_1 &mc_virt SLAVE_EBI_CH0>;

		status = "disabled";

	};

};