input: qcom-hv-haptics: adjust T_LRA for auto RC CLK calibration case

When auto RC clock calibration mode is selected, the 32.768 KHz sleep
clock is used as the reference clock but the hardware module assumes
the reference clock is 32 KHz. This results in inaccuracy on output
drive frequency. Correct this by scaling the LRA period using a factor
of 1.024 in auto RC clock calibration case.

Change-Id: I1d4f6cb90c00ffbd9932928e64666a2122d8d4af
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>