Loading bindings/sde.txt +8 −5 Original line number Diff line number Diff line Loading @@ -342,9 +342,11 @@ Optional properties: control register. Number of offsets defined should match the number of offsets defined in property: qcom,sde-wb-off - qcom,sde-reg-dma-off: Offset of the register dma hardware block from "regdma_phys" defined in reg property. - qcom,sde-reg-dma-version: Version of the reg dma hardware block. - qcom,sde-reg-dma-off: Array of u32 offset addresses of the dma hardware blocks, relative to "regdma_phys" defined in reg property. - qcom,sde-reg-dma-id: Array of u32 DMA block type ids corresponding to the offsets declared in property: qcom,sde-reg-dma-off - qcom,sde-reg-dma-version: Version of the reg dma hardware blocks. - qcom,sde-reg-dma-trigger-off: Offset of the lut dma trigger reg from "mdp_phys" defined in reg property. - qcom,sde-reg-dma-broadcast-disabled: Boolean property to indicate if broadcast Loading Loading @@ -770,8 +772,9 @@ Example: qcom,sde-vbif-qos-cwb-remap = <3 3 4 4 5 5 6 3>; qcom,sde-vbif-qos-lutdma-remap = <3 3 3 3 4 4 4 4>; qcom,sde-reg-dma-off = <0>; qcom,sde-reg-dma-version = <0x00010002>; qcom,sde-reg-dma-off = <0 0x400>; qcom,sde-reg-dma-id = <0 1>; qcom,sde-reg-dma-version = <0x00020000>; qcom,sde-reg-dma-trigger-off = <0x119c>; qcom,sde-reg-dma-broadcast-disabled = <0>; qcom,sde-reg-dma-xin-id = <7>; Loading display/lahaina-sde.dtsi +6 −5 Original line number Diff line number Diff line Loading @@ -5,7 +5,7 @@ compatible = "qcom,sde-kms"; reg = <0x0ae00000 0x84000>, <0x0aeb0000 0x2008>, <0x0aeac000 0x214>, <0x0aeac000 0x800>, <0x0af50000 0x038>; reg-names = "mdp_phys", "vbif_phys", Loading Loading @@ -221,8 +221,9 @@ /* offsets are relative to "mdp_phys + qcom,sde-off */ qcom,sde-reg-dma-off = <0>; qcom,sde-reg-dma-version = <0x00010002>; qcom,sde-reg-dma-off = <0 0x400>; qcom,sde-reg-dma-id = <0 1>; qcom,sde-reg-dma-version = <0x00020000>; qcom,sde-reg-dma-trigger-off = <0x119c>; qcom,sde-reg-dma-xin-id = <7>; qcom,sde-reg-dma-clk-ctrl = <0x2bc 20>; Loading Loading @@ -264,13 +265,13 @@ }; qcom,sde-dspp-blocks { qcom,sde-dspp-igc = <0x0 0x00030001>; qcom,sde-dspp-igc = <0x1260 0x00030002>; qcom,sde-dspp-hsic = <0x800 0x00010007>; qcom,sde-dspp-memcolor = <0x880 0x00010007>; qcom,sde-dspp-hist = <0x800 0x00010007>; qcom,sde-dspp-sixzone= <0x900 0x00010007>; qcom,sde-dspp-vlut = <0xa00 0x00010008>; qcom,sde-dspp-gamut = <0x1000 0x00040002>; qcom,sde-dspp-gamut = <0x1000 0x00040003>; qcom,sde-dspp-pcc = <0x1700 0x00040000>; qcom,sde-dspp-gc = <0x17c0 0x00010008>; qcom,sde-dspp-dither = <0x82c 0x00010007>; Loading Loading
bindings/sde.txt +8 −5 Original line number Diff line number Diff line Loading @@ -342,9 +342,11 @@ Optional properties: control register. Number of offsets defined should match the number of offsets defined in property: qcom,sde-wb-off - qcom,sde-reg-dma-off: Offset of the register dma hardware block from "regdma_phys" defined in reg property. - qcom,sde-reg-dma-version: Version of the reg dma hardware block. - qcom,sde-reg-dma-off: Array of u32 offset addresses of the dma hardware blocks, relative to "regdma_phys" defined in reg property. - qcom,sde-reg-dma-id: Array of u32 DMA block type ids corresponding to the offsets declared in property: qcom,sde-reg-dma-off - qcom,sde-reg-dma-version: Version of the reg dma hardware blocks. - qcom,sde-reg-dma-trigger-off: Offset of the lut dma trigger reg from "mdp_phys" defined in reg property. - qcom,sde-reg-dma-broadcast-disabled: Boolean property to indicate if broadcast Loading Loading @@ -770,8 +772,9 @@ Example: qcom,sde-vbif-qos-cwb-remap = <3 3 4 4 5 5 6 3>; qcom,sde-vbif-qos-lutdma-remap = <3 3 3 3 4 4 4 4>; qcom,sde-reg-dma-off = <0>; qcom,sde-reg-dma-version = <0x00010002>; qcom,sde-reg-dma-off = <0 0x400>; qcom,sde-reg-dma-id = <0 1>; qcom,sde-reg-dma-version = <0x00020000>; qcom,sde-reg-dma-trigger-off = <0x119c>; qcom,sde-reg-dma-broadcast-disabled = <0>; qcom,sde-reg-dma-xin-id = <7>; Loading
display/lahaina-sde.dtsi +6 −5 Original line number Diff line number Diff line Loading @@ -5,7 +5,7 @@ compatible = "qcom,sde-kms"; reg = <0x0ae00000 0x84000>, <0x0aeb0000 0x2008>, <0x0aeac000 0x214>, <0x0aeac000 0x800>, <0x0af50000 0x038>; reg-names = "mdp_phys", "vbif_phys", Loading Loading @@ -221,8 +221,9 @@ /* offsets are relative to "mdp_phys + qcom,sde-off */ qcom,sde-reg-dma-off = <0>; qcom,sde-reg-dma-version = <0x00010002>; qcom,sde-reg-dma-off = <0 0x400>; qcom,sde-reg-dma-id = <0 1>; qcom,sde-reg-dma-version = <0x00020000>; qcom,sde-reg-dma-trigger-off = <0x119c>; qcom,sde-reg-dma-xin-id = <7>; qcom,sde-reg-dma-clk-ctrl = <0x2bc 20>; Loading Loading @@ -264,13 +265,13 @@ }; qcom,sde-dspp-blocks { qcom,sde-dspp-igc = <0x0 0x00030001>; qcom,sde-dspp-igc = <0x1260 0x00030002>; qcom,sde-dspp-hsic = <0x800 0x00010007>; qcom,sde-dspp-memcolor = <0x880 0x00010007>; qcom,sde-dspp-hist = <0x800 0x00010007>; qcom,sde-dspp-sixzone= <0x900 0x00010007>; qcom,sde-dspp-vlut = <0xa00 0x00010008>; qcom,sde-dspp-gamut = <0x1000 0x00040002>; qcom,sde-dspp-gamut = <0x1000 0x00040003>; qcom,sde-dspp-pcc = <0x1700 0x00040000>; qcom,sde-dspp-gc = <0x17c0 0x00010008>; qcom,sde-dspp-dither = <0x82c 0x00010007>; Loading