ARM: dts: msm: Add QUPv3 and GPI DT nodes on HOLI (08ec1de2) · Commits · e / devices / android_kernel_fairphone_FP5

qcom/holi-pinctrl.dtsi

+376 −0

Original line number	Diff line number	Diff line
		@@ -7,5 +7,381 @@
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;

		qupv3_se0_i2c_pins: qupv3_se0_i2c_pins {
		qupv3_se0_i2c_active: qupv3_se0_i2c_active {
		mux {
		pins = "gpio0", "gpio1";
		function = "qup00";
		};

		config {
		pins = "gpio0", "gpio1";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		qupv3_se0_i2c_sleep: qupv3_se0_i2c_sleep {
		mux {
		pins = "gpio0", "gpio1";
		function = "gpio";
		};

		config {
		pins = "gpio0", "gpio1";
		drive-strength = <2>;
		bias-disable;
		};
		};
		};

		qupv3_se0_spi_pins: qupv3_se0_spi_pins {
		qupv3_se0_spi_active: qupv3_se0_spi_active {
		mux {
		pins = "gpio0", "gpio1",
		"gpio2", "gpio3";
		function = "qup00";
		};

		config {
		pins = "gpio0", "gpio1",
		"gpio2", "gpio3";
		drive-strength = <6>;
		bias-disable;
		};
		};

		qupv3_se0_spi_sleep: qupv3_se0_spi_sleep {
		mux {
		pins = "gpio0", "gpio1",
		"gpio2", "gpio3";
		function = "gpio";
		};

		config {
		pins = "gpio0", "gpio1",
		"gpio2", "gpio3";
		drive-strength = <6>;
		bias-disable;
		};
		};
		};

		qupv3_se1_4uart_pins: qupv3_se1_4uart_pins {
		qupv3_se1_default_cts:
		qupv3_se1_default_cts {
		mux {
		pins = "gpio61";
		function = "gpio";
		};

		config {
		pins = "gpio61";
		drive-strength = <2>;
		bias-pull-down;
		};
		};

		qupv3_se1_default_rtsrx:
		qupv3_se1_default_rtsrx {
		mux {
		pins = "gpio62", "gpio64";
		function = "gpio";
		};

		config {
		pins = "gpio62", "gpio64";
		drive-strength = <2>;
		bias-pull-down;
		};
		};

		qupv3_se1_default_tx:
		qupv3_se1_default_tx {
		mux {
		pins = "gpio63";
		function = "gpio";
		};

		config {
		pins = "gpio63";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		qupv3_se1_ctsrx: qupv3_se1_ctsrx {
		mux {
		pins = "gpio61", "gpio64";
		function = "qup01";
		};

		config {
		pins = "gpio61", "gpio64";
		drive-strength = <2>;
		bias-disable;
		};
		};

		qupv3_se1_rts: qupv3_se1_rts {
		mux {
		pins = "gpio62";
		function = "qup01";
		};

		config {
		pins = "gpio62";
		drive-strength = <2>;
		bias-pull-down;
		};
		};

		qupv3_se1_tx: qupv3_se1_tx {
		mux {
		pins = "gpio63";
		function = "qup01";
		};

		config {
		pins = "gpio63";
		drive-strength = <2>;
		bias-pull-up;
		};
		};
		};

		qupv3_se2_i2c_pins: qupv3_se2_i2c_pins {
		qupv3_se2_i2c_active: qupv3_se2_i2c_active {
		mux {
		pins = "gpio45", "gpio46";
		function = "qup02";
		};

		config {
		pins = "gpio45", "gpio46";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		qupv3_se2_i2c_sleep: qupv3_se2_i2c_sleep {
		mux {
		pins = "gpio45", "gpio46";
		function = "gpio";
		};

		config {
		pins = "gpio45", "gpio46";
		drive-strength = <2>;
		bias-disable;
		};
		};
		};

		qupv3_se2_spi_pins: qupv3_se2_spi_pins {
		qupv3_se2_spi_active: qupv3_se2_spi_active {
		mux {
		pins = "gpio45", "gpio46",
		"gpio56", "gpio57";
		function = "qup02";
		};

		config {
		pins = "gpio45", "gpio46",
		"gpio56", "gpio57";
		drive-strength = <6>;
		bias-disable;
		};
		};

		qupv3_se2_spi_sleep: qupv3_se2_spi_sleep {
		mux {
		pins = "gpio45", "gpio46",
		"gpio56", "gpio57";
		function = "gpio";
		};

		config {
		pins = "gpio45", "gpio46",
		"gpio56", "gpio57";
		drive-strength = <6>;
		bias-disable;
		};
		};
		};

		qupv3_se6_i2c_pins: qupv3_se6_i2c_pins {
		qupv3_se6_i2c_active: qupv3_se6_i2c_active {
		mux {
		pins = "gpio13", "gpio14";
		function = "qup10";
		};

		config {
		pins = "gpio13", "gpio14";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		qupv3_se6_i2c_sleep: qupv3_se6_i2c_sleep {
		mux {
		pins = "gpio13", "gpio14";
		function = "gpio";
		};

		config {
		pins = "gpio13", "gpio14";
		drive-strength = <2>;
		bias-disable;
		};
		};
		};

		qupv3_se6_spi_pins: qupv3_se6_spi_pins {
		qupv3_se6_spi_active: qupv3_se6_spi_active {
		mux {
		pins = "gpio13", "gpio14",
		"gpio15", "gpio16";
		function = "qup10";
		};

		config {
		pins = "gpio13", "gpio14",
		"gpio15", "gpio16";
		drive-strength = <6>;
		bias-disable;
		};
		};

		qupv3_se6_spi_sleep: qupv3_se6_spi_sleep {
		mux {
		pins = "gpio13", "gpio14",
		"gpio15", "gpio16";
		function = "gpio";
		};

		config {
		pins = "gpio13", "gpio14",
		"gpio15", "gpio16";
		drive-strength = <6>;
		bias-disable;
		};
		};
		};

		qupv3_se7_i2c_pins: qupv3_se7_i2c_pins {
		qupv3_se7_i2c_active: qupv3_se7_i2c_active {
		mux {
		pins = "gpio27", "gpio28";
		function = "qup11";
		};

		config {
		pins = "gpio27", "gpio28";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		qupv3_se7_i2c_sleep: qupv3_se7_i2c_sleep {
		mux {
		pins = "gpio27", "gpio28";
		function = "gpio";
		};

		config {
		pins = "gpio27", "gpio28";
		drive-strength = <2>;
		bias-disable;
		};
		};
		};

		qupv3_se8_i2c_pins: qupv3_se8_i2c_pins {
		qupv3_se8_i2c_active: qupv3_se8_i2c_active {
		mux {
		pins = "gpio19", "gpio20";
		function = "qup12";
		};

		config {
		pins = "gpio19", "gpio20";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		qupv3_se8_i2c_sleep: qupv3_se8_i2c_sleep {
		mux {
		pins = "gpio19", "gpio20";
		function = "gpio";
		};

		config {
		pins = "gpio19", "gpio20";
		drive-strength = <2>;
		bias-disable;
		};
		};
		};

		qupv3_se9_2uart_pins: qupv3_se9_2uart_pins {
		qupv3_se9_2uart_active: qupv3_se9_2uart_active {
		mux {
		pins = "gpio25", "gpio26";
		function = "qup13";
		};

		config {
		pins = "gpio25", "gpio26";
		drive-strength = <2>;
		bias-disable;
		};
		};

		qupv3_se9_2uart_sleep: qupv3_se9_2uart_sleep {
		mux {
		pins = "gpio25", "gpio26";
		function = "gpio";
		};

		config {
		pins = "gpio25", "gpio26";
		drive-strength = <2>;
		bias-pull-down;
		};
		};
		};

		qupv3_se10_i2c_pins: qupv3_se10_i2c_pins {
		qupv3_se10_i2c_active: qupv3_se10_i2c_active {
		mux {
		pins = "gpio4", "gpio5";
		function = "qup14";
		};

		config {
		pins = "gpio4", "gpio5";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		qupv3_se10_i2c_sleep: qupv3_se10_i2c_sleep {
		mux {
		pins = "gpio4", "gpio5";
		function = "gpio";
		};

		config {
		pins = "gpio4", "gpio5";
		drive-strength = <2>;
		bias-disable;
		};
		};
		};

		};
		};

qcom/holi-qupv3.dtsi

0 → 100644

+323 −0

Original line number	Diff line number	Diff line
		#include <dt-bindings/interconnect/qcom,holi.h>

		&soc {
		/* QUPv3 SE Instances
		* Qup0 0: SE 0: I2C, SPI
		* Qup0 1: SE 1: HSUART
		* Qup0 2: SE 2: I2C, SPI
		* Qup0 3: SE 3: Not bolled out
		* Qup0 4: SE 4: Not bolled out
		* Qup0 5: SE 5: Not bolled out
		* Qup1 0: SE 6: I2C, SPI
		* Qup1 1: SE 7: I2C
		* Qup1 2: SE 8: I2C
		* Qup1 3: SE 9: DEBUG UART
		* Qup1 4: SE 10: I2C
		* Qup1 5: SE 11: Not bolled out
		*/

		/* QUPv3_0 wrapper instance */
		qupv3_0: qcom,qupv3_0_geni_se@4ac0000 {
		compatible = "qcom,qupv3-geni-se";
		reg = <0x4ac0000 0x2000>;
		qcom,msm-bus,num-paths = <2>;
		qcom,msm-bus,vectors-bus-ids =
		<MASTER_QUP_CORE_0 SLAVE_QUP_CORE_0>,
		<MASTER_QUP_0 SLAVE_EBI>;
		qcom,vote-for-bw;
		iommus = <&apps_smmu 0x0003 0x0>;
		qcom,iommu-dma-addr-pool = <0x40000000 0xc0000000>;
		qcom,iommu-dma = "fastmap";
		};

		/* GPI Instance */
		gpi_dma0: qcom,gpi-dma@4a00000 {
		compatible = "qcom,gpi-dma";
		#dma-cells = <5>;
		reg = <0x4a00000 0x60000>;
		reg-names = "gpi-top";
		iommus = <&apps_smmu 0x0016 0x0>;
		qcom,max-num-gpii = <10>;
		interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
		qcom,gpii-mask = <0x1f>;
		qcom,ev-factor = <2>;
		qcom,iommu-dma-addr-pool = <0x100000 0x100000>;
		qcom,gpi-ee-offset = <0x10000>;
		status = "ok";
		};

		qupv3_se0_i2c: i2c@4a80000 {
		compatible = "qcom,i2c-geni";
		reg = <0x4a80000 0x4000>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
		clock-names = "se-clk", "m-ahb", "s-ahb";
		clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>,
		<&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
		<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&qupv3_se0_i2c_active>;
		pinctrl-1 = <&qupv3_se0_i2c_sleep>;
		dmas = <&gpi_dma0 0 0 3 64 0>,
		<&gpi_dma0 1 0 3 64 0>;
		dma-names = "tx", "rx";
		qcom,wrapper-core = <&qupv3_0>;
		status = "disabled";
		};

		qupv3_se0_spi: spi@4a80000 {
		compatible = "qcom,spi-geni";
		reg = <0x4a80000 0x4000>;
		#address-cells = <1>;
		#size-cells = <0>;
		reg-names = "se_phys";
		interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
		clock-names = "se-clk", "m-ahb", "s-ahb";
		clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>,
		<&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
		<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&qupv3_se0_spi_active>;
		pinctrl-1 = <&qupv3_se0_spi_sleep>;
		dmas = <&gpi_dma0 0 0 1 64 0>,
		<&gpi_dma0 1 0 1 64 0>;
		dma-names = "tx", "rx";
		spi-max-frequency = <50000000>;
		qcom,wrapper-core = <&qupv3_0>;
		status = "disabled";
		};

		/* HS UART Instance */
		qupv3_se1_4uart: qcom,qup_uart@4a84000 {
		compatible = "qcom,msm-geni-serial-hs";
		reg = <0x4a84000 0x4000>;
		reg-names = "se_phys";
		interrupts-extended = <&intc GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
		<&tlmm 64 IRQ_TYPE_LEVEL_HIGH>;
		clock-names = "se-clk", "m-ahb", "s-ahb";
		clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>,
		<&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
		<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
		pinctrl-names = "default", "active", "sleep";
		pinctrl-0 = <&qupv3_se1_default_cts>,
		<&qupv3_se1_default_rtsrx>, <&qupv3_se1_default_tx>;
		pinctrl-1 = <&qupv3_se1_ctsrx>, <&qupv3_se1_rts>,
		<&qupv3_se1_tx>;
		pinctrl-2 = <&qupv3_se1_ctsrx>, <&qupv3_se1_rts>,
		<&qupv3_se1_tx>;
		qcom,wakeup-byte = <0xFD>;
		qcom,wrapper-core = <&qupv3_0>;
		status = "disabled";
		};

		qupv3_se2_i2c: i2c@4a88000 {
		compatible = "qcom,i2c-geni";
		reg = <0x4a88000 0x4000>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
		clock-names = "se-clk", "m-ahb", "s-ahb";
		clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>,
		<&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
		<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&qupv3_se2_i2c_active>;
		pinctrl-1 = <&qupv3_se2_i2c_sleep>;
		dmas = <&gpi_dma0 0 2 3 64 0>,
		<&gpi_dma0 1 2 3 64 0>;
		dma-names = "tx", "rx";
		qcom,wrapper-core = <&qupv3_0>;
		status = "disabled";
		};

		qupv3_se2_spi: spi@4a88000 {
		compatible = "qcom,spi-geni";
		reg = <0x4a88000 0x4000>;
		#address-cells = <1>;
		#size-cells = <0>;
		reg-names = "se_phys";
		interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
		clock-names = "se-clk", "m-ahb", "s-ahb";
		clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>,
		<&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
		<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&qupv3_se2_spi_active>;
		pinctrl-1 = <&qupv3_se2_spi_sleep>;
		dmas = <&gpi_dma0 0 2 1 64 0>,
		<&gpi_dma0 1 2 1 64 0>;
		dma-names = "tx", "rx";
		spi-max-frequency = <50000000>;
		qcom,wrapper-core = <&qupv3_0>;
		status = "disabled";
		};

		/* QUPv3_1 wrapper instance */
		qupv3_1: qcom,qupv3_1_geni_se@4cc0000 {
		compatible = "qcom,qupv3-geni-se";
		reg = <0x4cc0000 0x2000>;
		qcom,msm-bus,num-paths = <2>;
		qcom,msm-bus,vectors-bus-ids =
		<MASTER_QUP_CORE_1 SLAVE_QUP_CORE_1>,
		<MASTER_QUP_1 SLAVE_EBI>;
		qcom,vote-for-bw;
		iommus = <&apps_smmu 0x00c3 0x0>;
		qcom,iommu-dma-addr-pool = <0x40000000 0xc0000000>;
		qcom,iommu-dma = "fastmap";
		};

		/* GPI Instance */
		gpi_dma1: qcom,gpi-dma@4c00000 {
		compatible = "qcom,gpi-dma";
		#dma-cells = <5>;
		reg = <0x4c00000 0x60000>;
		reg-names = "gpi-top";
		iommus = <&apps_smmu 0x00d6 0x0>;
		qcom,max-num-gpii = <10>;
		interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
		qcom,gpii-mask = <0x1f>;
		qcom,ev-factor = <2>;
		qcom,iommu-dma-addr-pool = <0x100000 0x100000>;
		qcom,gpi-ee-offset = <0x10000>;
		status = "ok";
		};

		qupv3_se6_i2c: i2c@4c80000 {
		compatible = "qcom,i2c-geni";
		reg = <0x4c80000 0x4000>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
		clock-names = "se-clk", "m-ahb", "s-ahb";
		clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>,
		<&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
		<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&qupv3_se6_i2c_active>;
		pinctrl-1 = <&qupv3_se6_i2c_sleep>;
		dmas = <&gpi_dma1 0 0 3 64 0>,
		<&gpi_dma1 1 0 3 64 0>;
		dma-names = "tx", "rx";
		qcom,wrapper-core = <&qupv3_1>;
		status = "disabled";
		};

		qupv3_se6_spi: spi@4c80000 {
		compatible = "qcom,spi-geni";
		reg = <0x4c80000 0x4000>;
		#address-cells = <1>;
		#size-cells = <0>;
		reg-names = "se_phys";
		interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
		clock-names = "se-clk", "m-ahb", "s-ahb";
		clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>,
		<&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
		<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&qupv3_se6_spi_active>;
		pinctrl-1 = <&qupv3_se6_spi_sleep>;
		dmas = <&gpi_dma1 0 0 1 64 0>,
		<&gpi_dma1 1 0 1 64 0>;
		dma-names = "tx", "rx";
		spi-max-frequency = <50000000>;
		qcom,wrapper-core = <&qupv3_1>;
		status = "disabled";
		};

		qupv3_se7_i2c: i2c@4c84000 {
		compatible = "qcom,i2c-geni";
		reg = <0x4c84000 0x4000>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
		clock-names = "se-clk", "m-ahb", "s-ahb";
		clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>,
		<&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
		<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&qupv3_se7_i2c_active>;
		pinctrl-1 = <&qupv3_se7_i2c_sleep>;
		dmas = <&gpi_dma1 0 1 3 64 0>,
		<&gpi_dma1 1 1 3 64 0>;
		dma-names = "tx", "rx";
		qcom,wrapper-core = <&qupv3_1>;
		status = "disabled";
		};

		qupv3_se8_i2c: i2c@4c88000 {
		compatible = "qcom,i2c-geni";
		reg = <0x4c88000 0x4000>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
		clock-names = "se-clk", "m-ahb", "s-ahb";
		clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>,
		<&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
		<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&qupv3_se8_i2c_active>;
		pinctrl-1 = <&qupv3_se8_i2c_sleep>;
		dmas = <&gpi_dma1 0 2 3 64 0>,
		<&gpi_dma1 1 2 3 64 0>;
		dma-names = "tx", "rx";
		qcom,wrapper-core = <&qupv3_1>;
		status = "disabled";
		};

		/* Debug UART Instance */
		qupv3_se9_2uart: qcom,qup_uart@4c8c000 {
		compatible = "qcom,msm-geni-console";
		reg = <0x4c8c000 0x4000>;
		reg-names = "se_phys";
		interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
		clock-names = "se-clk", "m-ahb", "s-ahb";
		clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>,
		<&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
		<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&qupv3_se9_2uart_active>;
		pinctrl-1 = <&qupv3_se9_2uart_sleep>;
		qcom,wrapper-core = <&qupv3_1>;
		status = "disabled";
		};

		qupv3_se10_i2c: i2c@4c90000 {
		compatible = "qcom,i2c-geni";
		reg = <0x4c90000 0x4000>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
		clock-names = "se-clk", "m-ahb", "s-ahb";
		clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>,
		<&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
		<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&qupv3_se10_i2c_active>;
		pinctrl-1 = <&qupv3_se10_i2c_sleep>;
		dmas = <&gpi_dma1 0 4 3 64 0>,
		<&gpi_dma1 1 4 3 64 0>;
		dma-names = "tx", "rx";
		qcom,wrapper-core = <&qupv3_1>;
		status = "disabled";
		};

		};

qcom/holi.dtsi

+8 −0

Original line number	Diff line number	Diff line
		@@ -19,6 +19,8 @@

		aliases {
		ufshc1 = &ufshc_mem; /* Embedded UFS Slot */
		serial0 = &qupv3_se9_2uart;
		hsuart0 = &qupv3_se1_4uart;
		};

		cpus {
		@@ -1200,6 +1202,8 @@
		#include "holi-pm.dtsi"
		#include "holi-vidc.dtsi"
		#include "holi-thermal.dtsi"
		#include "holi-pinctrl.dtsi"
		#include "holi-qupv3.dtsi"

		&pmk8350 {
		reg = <6 SPMI_USID>;
		@@ -1475,3 +1479,7 @@
		parent-supply = <&VDD_GFX_LEVEL>;
		status = "ok";
		};

		&qupv3_se9_2uart {
		status = "ok";
		};