Merge commit '57477563' into android13-4.19-kona

Estimated tag: LA.UM.9.15.r1-07400-KAMORTA.QSSI13.0

* commit '57477563':
  ARM: dts: msm: Add Dynamic FPS support for SKU4
  ARM: dts: msm: Enable imx586 and imx686 for RB5 NonPop/M SOM
  ARM: dts: qcom: Add apb_bclk to enable dcc
  ARM: dts: msm: enable esd check for xr sku4 platform
  Revert "ARM: dts: msm: Add GPU pwrlevels for KONA-7230"
  ARM: dts: msm: Add cluster ID to core hang DT node
  ARM: dts: msm: update bandwidth vote to nominal values for bengal
  bindings: leds: Add torch-realtime-brightness-control property
  ARM: dts: msm: disable splash and rdump region for 7230
  ARM: dts: msm: add a dt property to restrict TPS4 pattern support
  ARM: dts: msm: Disable secondary usb controller for KONA-7230
  ARM: dts: msm: Add GPU pwrlevels for KONA-7230
  ARM: dts: msm: disable IPA entry for khaje APQ gaming targets
  ARM: dts: qcom: Disabling camera nodes for khajeg
  ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
  ARM: dts: qcom: Add device tree support for Khaje IOT
  ARM: dts: qcom: Add second trip to skin-msm-therm-usr for sxr2130
  ARM: dts: msm: Update MPM IPC register for khaje
  Revert "ARM: dts: msm: enable vsync-skew for SKU4 panel"
  ARM: dts: msm: Add gpio87 to PDC irq map for kona
  Revert "ARM: dts: msm: Remove IFE-Lite nodes"
  ARM: dts: msm: Configure PCIE2 for I210 Ethernet card
  ARM: dts: msm: Configure PCIE2 for I210 Ethernet card
  ARM: dts: msm: Configure PCIE2 for I210 Ethernet card
  ARM: dts: msm: Add configuration for ice driver in kona.dtsi
  ARM: dts: msm: enable vsync-skew for SKU4 panel
  ARM: dts: msm: Change the typical voltage for XR Reference devices
  ARM: dts: msm: configure dp as primary
  ARM: dts: msm: Remove IFE-Lite nodes
  ARM: dts: msm: dynamic aux config
  Revert "Revert "ARM: dts: msm: add dp support for rb5""
  ARM: dts: msm: Add initial support for Nordic
  ARM: dts: msm: Add initial dts support for KONA-7230
  Revert "ARM: dts: msm: add dp support for rb5"
  ARM: dts: msm: Add initial support for Nordic chip
  dt-bindings: add documentation for nordic-spicontroller
  ARM: dts: msm: update bias-voltage settings for display on bengal
  ARM: dts: msm: enable the 4-wire UART SE0 for QCS2290
  ARM: dts: msm: Add 4-wire UART SE0 dt nodes for DIAG
  ARM: dts: msm: add dp support for rb5
  ARM: dts: qcom: Add support sdm660-pm660a for SDM660
  dt-bindings: add documentation for kinetics-nordic
  ARM: dts: msm: Keep DSC properties for non-XR Kona projects
  ARM: dts: msm: add wb clk status for kona target
  dt-bindings: usb: Add genoa extcon notifier driver description
  ARM: dts: msm: Change persistence on AR Display
  ARM: dts: msm: Increase timeout for ufs phy gdsc on kona
  ARM: dts: qcom: update the subtype
  ARM: dts: msm: Add device tree files for SCUBALITE
  ARM: dts: msm: Enable CVP SMMU fault tolerance and Stall disable
  ARM: dts: qcom: Add new device tree
  ARM: dts: msm: Switching back to 60FPS to XR2 AR Glass

Change-Id: I85ce6994efe0406b1176b8090c2b3b31d21d9eeb