Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 8aa33ec2 authored by Maxime Ripard's avatar Maxime Ripard
Browse files

dt-bindings: net: Revert sun8i dwmac binding 



This binding still doesn't please everyone, and we're getting far too
close from the release to allow it to reach a stable version.

Let's remove it until the discussion settles down.

Acked-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent d86e63e1

Documentation/devicetree/bindings/net/dwmac-sun8i.txt

deleted100644 → 0
+0 −84
Original line number Diff line number Diff line 
* Allwinner sun8i GMAC ethernet controller



This device is a platform glue layer for stmmac.

Please see stmmac.txt for the other unchanged properties.



Required properties:

- compatible: should be one of the following string:

		"allwinner,sun8i-a83t-emac"

		"allwinner,sun8i-h3-emac"

		"allwinner,sun8i-v3s-emac"

		"allwinner,sun50i-a64-emac"

- reg: address and length of the register for the device.

- interrupts: interrupt for the device

- interrupt-names: should be "macirq"

- clocks: A phandle to the reference clock for this device

- clock-names: should be "stmmaceth"

- resets: A phandle to the reset control for this device

- reset-names: should be "stmmaceth"

- phy-mode: See ethernet.txt

- phy-handle: See ethernet.txt

- #address-cells: shall be 1

- #size-cells: shall be 0

- syscon: A phandle to the syscon of the SoC with one of the following

 compatible string:

  - allwinner,sun8i-h3-system-controller

  - allwinner,sun8i-v3s-system-controller

  - allwinner,sun50i-a64-system-controller

  - allwinner,sun8i-a83t-system-controller



Optional properties:

- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0)

- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0)

Both delay properties need to be a multiple of 100. They control the delay for

external PHY.



Optional properties for the following compatibles:

  - "allwinner,sun8i-h3-emac",

  - "allwinner,sun8i-v3s-emac":

- allwinner,leds-active-low: EPHY LEDs are active low



Required child node of emac:

- mdio bus node: should be named mdio



Required properties of the mdio node:

- #address-cells: shall be 1

- #size-cells: shall be 0



The device node referenced by "phy" or "phy-handle" should be a child node

of the mdio node. See phy.txt for the generic PHY bindings.



Required properties of the phy node with the following compatibles:

  - "allwinner,sun8i-h3-emac",

  - "allwinner,sun8i-v3s-emac":

- clocks: a phandle to the reference clock for the EPHY

- resets: a phandle to the reset control for the EPHY



Example:



emac: ethernet@1c0b000 {

	compatible = "allwinner,sun8i-h3-emac";

	syscon = <&syscon>;

	reg = <0x01c0b000 0x104>;

	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;

	interrupt-names = "macirq";

	resets = <&ccu RST_BUS_EMAC>;

	reset-names = "stmmaceth";

	clocks = <&ccu CLK_BUS_EMAC>;

	clock-names = "stmmaceth";

	#address-cells = <1>;

	#size-cells = <0>;



	phy-handle = <&int_mii_phy>;

	phy-mode = "mii";

	allwinner,leds-active-low;

	mdio: mdio {

		#address-cells = <1>;

		#size-cells = <0>;

		int_mii_phy: ethernet-phy@1 {

			reg = <1>;

			clocks = <&ccu CLK_BUS_EPHY>;

			resets = <&ccu RST_BUS_EPHY>;

		};

	};

};