Merge branches 'acpi-power', 'acpi-blacklist', 'acpi-video' and 'acpi-doc' (52e70c8a) · Commits · e / devices / android_kernel_fairphone_FP4

Documentation/acpi/linuxized-acpica.txt

+5 −5

Original line number	Diff line number	Diff line
		@@ -24,7 +24,7 @@ upstream.
		The homepage of ACPICA project is: www.acpica.org, it is maintained and
		supported by Intel Corporation.

		The following figure depicts the Linux ACPI subystem where the ACPICA
		The following figure depicts the Linux ACPI subsystem where the ACPICA
		adaptation is included:

		+---------------------------------------------------------+
		@@ -110,7 +110,7 @@ upstream.
		Linux patches. The patches generated by this process are referred to as
		"linuxized ACPICA patches". The release process is carried out on a local
		copy the ACPICA git repository. Each commit in the monthly release is
		converted into a linuxized ACPICA patch. Together, they form the montly
		converted into a linuxized ACPICA patch. Together, they form the monthly
		ACPICA release patchset for the Linux ACPI community. This process is
		illustrated in the following figure:

		@@ -165,7 +165,7 @@ upstream.
		<http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git>.

		Before the linuxized ACPICA patches are sent to the Linux ACPI community
		for review, there is a quality ensurance build test process to reduce
		for review, there is a quality assurance build test process to reduce
		porting issues. Currently this build process only takes care of the
		following kernel configuration options:
		CONFIG_ACPI/CONFIG_ACPI_DEBUG/CONFIG_ACPI_DEBUGGER
		@@ -195,12 +195,12 @@ upstream.
		release utilities (please refer to Section 4 below for the details).
		3. Linux specific features - Sometimes it's impossible to use the
		current ACPICA APIs to implement features required by the Linux kernel,
		so Linux developers occasionaly have to change ACPICA code directly.
		so Linux developers occasionally have to change ACPICA code directly.
		Those changes may not be acceptable by ACPICA upstream and in such cases
		they are left as committed ACPICA divergences unless the ACPICA side can
		implement new mechanisms as replacements for them.
		4. ACPICA release fixups - ACPICA only tests commits using a set of the
		user space simulation utilies, thus the linuxized ACPICA patches may
		user space simulation utilities, thus the linuxized ACPICA patches may
		break the Linux kernel, leaving us build/boot failures. In order to
		avoid breaking Linux bisection, fixes are applied directly to the
		linuxized ACPICA patches during the release process. When the release

drivers/acpi/ac.c

+20 −0

Original line number	Diff line number	Diff line
		@@ -57,12 +57,23 @@ static int acpi_ac_add(struct acpi_device *device);
		static int acpi_ac_remove(struct acpi_device *device);
		static void acpi_ac_notify(struct acpi_device *device, u32 event);

		struct acpi_ac_bl {
		const char *hid;
		int hrv;
		};

		static const struct acpi_device_id ac_device_ids[] = {
		{"ACPI0003", 0},
		{"", 0},
		};
		MODULE_DEVICE_TABLE(acpi, ac_device_ids);

		/* Lists of PMIC ACPI HIDs with an (often better) native charger driver */
		static const struct acpi_ac_bl acpi_ac_blacklist[] = {
		{ "INT33F4", -1 }, /* X-Powers AXP288 PMIC */
		{ "INT34D3", 3 }, /* Intel Cherrytrail Whiskey Cove PMIC */
		};

		#ifdef CONFIG_PM_SLEEP
		static int acpi_ac_resume(struct device *dev);
		#endif
		@@ -424,11 +435,20 @@ static int acpi_ac_remove(struct acpi_device *device)

		static int __init acpi_ac_init(void)
		{
		unsigned int i;
		int result;

		if (acpi_disabled)
		return -ENODEV;

		for (i = 0; i < ARRAY_SIZE(acpi_ac_blacklist); i++)
		if (acpi_dev_present(acpi_ac_blacklist[i].hid, "1",
		acpi_ac_blacklist[i].hrv)) {
		pr_info(PREFIX "AC: found native %s PMIC, not loading\n",
		acpi_ac_blacklist[i].hid);
		return -ENODEV;
		}

		#ifdef CONFIG_ACPI_PROCFS_POWER
		acpi_ac_dir = acpi_lock_ac_dir();
		if (!acpi_ac_dir)

drivers/acpi/acpi_video.c

+111 −46

Original line number	Diff line number	Diff line
		@@ -73,6 +73,10 @@ module_param(report_key_events, int, 0644);
		MODULE_PARM_DESC(report_key_events,
		"0: none, 1: output changes, 2: brightness changes, 3: all");

		/*
		* Whether the struct acpi_video_device_attrib::device_id_scheme bit should be
		* assumed even if not actually set.
		*/
		static bool device_id_scheme = false;
		module_param(device_id_scheme, bool, 0444);

		@@ -88,6 +92,18 @@ static int acpi_video_bus_remove(struct acpi_device *device);
		static void acpi_video_bus_notify(struct acpi_device *device, u32 event);
		void acpi_video_detect_exit(void);

		/*
		* Indices in the _BCL method response: the first two items are special,
		* the rest are all supported levels.
		*
		* See page 575 of the ACPI spec 3.0
		*/
		enum acpi_video_level_idx {
		ACPI_VIDEO_AC_LEVEL, /* level when machine has full power */
		ACPI_VIDEO_BATTERY_LEVEL, /* level when machine is on batteries */
		ACPI_VIDEO_FIRST_LEVEL, /* actual supported levels begin here */
		};

		static const struct acpi_device_id video_device_ids[] = {
		{ACPI_VIDEO_HID, 0},
		{"", 0},
		@@ -132,7 +148,15 @@ struct acpi_video_device_attrib {
		the VGA device. */
		u32 pipe_id:3; /* For VGA multiple-head devices. */
		u32 reserved:10; /* Must be 0 */
		u32 device_id_scheme:1; /* Device ID Scheme */

		/*
		* The device ID might not actually follow the scheme described by this
		* struct acpi_video_device_attrib. If it does, then this bit
		* device_id_scheme is set; otherwise, other fields should be ignored.
		*
		* (but also see the global flag device_id_scheme)
		*/
		u32 device_id_scheme:1;
		};

		struct acpi_video_enumerated_device {
		@@ -217,20 +241,16 @@ static int acpi_video_get_brightness(struct backlight_device *bd)

		if (acpi_video_device_lcd_get_level_current(vd, &cur_level, false))
		return -EINVAL;
		for (i = 2; i < vd->brightness->count; i++) {
		for (i = ACPI_VIDEO_FIRST_LEVEL; i < vd->brightness->count; i++) {
		if (vd->brightness->levels[i] == cur_level)
		/*
		* The first two entries are special - see page 575
		* of the ACPI spec 3.0
		*/
		return i - 2;
		return i - ACPI_VIDEO_FIRST_LEVEL;
		}
		return 0;
		}

		static int acpi_video_set_brightness(struct backlight_device *bd)
		{
		int request_level = bd->props.brightness + 2;
		int request_level = bd->props.brightness + ACPI_VIDEO_FIRST_LEVEL;
		struct acpi_video_device *vd = bl_get_data(bd);

		cancel_delayed_work(&vd->switch_brightness_work);
		@@ -244,18 +264,18 @@ static const struct backlight_ops acpi_backlight_ops = {
		};

		/* thermal cooling device callbacks */
		static int video_get_max_state(struct thermal_cooling_device *cooling_dev, unsigned
		long *state)
		static int video_get_max_state(struct thermal_cooling_device *cooling_dev,
		unsigned long *state)
		{
		struct acpi_device *device = cooling_dev->devdata;
		struct acpi_video_device *video = acpi_driver_data(device);

		*state = video->brightness->count - 3;
		*state = video->brightness->count - ACPI_VIDEO_FIRST_LEVEL - 1;
		return 0;
		}

		static int video_get_cur_state(struct thermal_cooling_device *cooling_dev, unsigned
		long *state)
		static int video_get_cur_state(struct thermal_cooling_device *cooling_dev,
		unsigned long *state)
		{
		struct acpi_device *device = cooling_dev->devdata;
		struct acpi_video_device *video = acpi_driver_data(device);
		@@ -264,7 +284,8 @@ static int video_get_cur_state(struct thermal_cooling_device *cooling_dev, unsig

		if (acpi_video_device_lcd_get_level_current(video, &level, false))
		return -EINVAL;
		for (offset = 2; offset < video->brightness->count; offset++)
		for (offset = ACPI_VIDEO_FIRST_LEVEL; offset < video->brightness->count;
		offset++)
		if (level == video->brightness->levels[offset]) {
		*state = video->brightness->count - offset - 1;
		return 0;
		@@ -280,7 +301,7 @@ video_set_cur_state(struct thermal_cooling_device *cooling_dev, unsigned long st
		struct acpi_video_device *video = acpi_driver_data(device);
		int level;

		if (state >= video->brightness->count - 2)
		if (state >= video->brightness->count - ACPI_VIDEO_FIRST_LEVEL)
		return -EINVAL;

		state = video->brightness->count - state;
		@@ -345,10 +366,12 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level)
		}

		device->brightness->curr = level;
		for (state = 2; state < device->brightness->count; state++)
		for (state = ACPI_VIDEO_FIRST_LEVEL; state < device->brightness->count;
		state++)
		if (level == device->brightness->levels[state]) {
		if (device->backlight)
		device->backlight->props.brightness = state - 2;
		device->backlight->props.brightness =
		state - ACPI_VIDEO_FIRST_LEVEL;
		return 0;
		}

		@@ -530,14 +553,16 @@ acpi_video_bqc_value_to_level(struct acpi_video_device *device,

		if (device->brightness->flags._BQC_use_index) {
		/*
		* _BQC returns an index that doesn't account for
		* the first 2 items with special meaning, so we need
		* to compensate for that by offsetting ourselves
		* _BQC returns an index that doesn't account for the first 2
		* items with special meaning (see enum acpi_video_level_idx),
		* so we need to compensate for that by offsetting ourselves
		*/
		if (device->brightness->flags._BCL_reversed)
		bqc_value = device->brightness->count - 3 - bqc_value;
		bqc_value = device->brightness->count -
		ACPI_VIDEO_FIRST_LEVEL - 1 - bqc_value;

		level = device->brightness->levels[bqc_value + 2];
		level = device->brightness->levels[bqc_value +
		ACPI_VIDEO_FIRST_LEVEL];
		} else {
		level = bqc_value;
		}
		@@ -571,7 +596,8 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,

		level = acpi_video_bqc_value_to_level(device, level);

		for (i = 2; i < device->brightness->count; i++)
		for (i = ACPI_VIDEO_FIRST_LEVEL;
		i < device->brightness->count; i++)
		if (device->brightness->levels[i] == *level) {
		device->brightness->curr = *level;
		return 0;
		@@ -714,9 +740,37 @@ static int acpi_video_bqc_quirk(struct acpi_video_device *device,

		/*
		* Some systems always report current brightness level as maximum
		* through _BQC, we need to test another value for them.
		* through _BQC, we need to test another value for them. However,
		* there is a subtlety:
		*
		* If the _BCL package ordering is descending, the first level
		* (br->levels[2]) is likely to be 0, and if the number of levels
		* matches the number of steps, we might confuse a returned level to
		* mean the index.
		*
		* For example:
		*
		* current_level = max_level = 100
		* test_level = 0
		* returned level = 100
		*
		* In this case 100 means the level, not the index, and _BCM failed.
		* Still, if the _BCL package ordering is descending, the index of
		* level 0 is also 100, so we assume _BQC is indexed, when it's not.
		*
		* This causes all _BQC calls to return bogus values causing weird
		* behavior from the user's perspective. For example:
		*
		* xbacklight -set 10; xbacklight -set 20;
		*
		* would flash to 90% and then slowly down to the desired level (20).
		*
		* The solution is simple; test anything other than the first level
		* (e.g. 1).
		*/
		test_level = current_level == max_level ? br->levels[3] : max_level;
		test_level = current_level == max_level
		? br->levels[ACPI_VIDEO_FIRST_LEVEL + 1]
		: max_level;

		result = acpi_video_device_lcd_set_level(device, test_level);
		if (result)
		@@ -730,8 +784,8 @@ static int acpi_video_bqc_quirk(struct acpi_video_device *device,
		/* buggy _BQC found, need to find out if it uses index */
		if (level < br->count) {
		if (br->flags._BCL_reversed)
		level = br->count - 3 - level;
		if (br->levels[level + 2] == test_level)
		level = br->count - ACPI_VIDEO_FIRST_LEVEL - 1 - level;
		if (br->levels[level + ACPI_VIDEO_FIRST_LEVEL] == test_level)
		br->flags._BQC_use_index = 1;
		}

		@@ -761,7 +815,7 @@ int acpi_video_get_levels(struct acpi_device *device,
		goto out;
		}

		if (obj->package.count < 2) {
		if (obj->package.count < ACPI_VIDEO_FIRST_LEVEL) {
		result = -EINVAL;
		goto out;
		}
		@@ -773,8 +827,13 @@ int acpi_video_get_levels(struct acpi_device *device,
		goto out;
		}

		br->levels = kmalloc((obj->package.count + 2) * sizeof *(br->levels),
		GFP_KERNEL);
		/*
		* Note that we have to reserve 2 extra items (ACPI_VIDEO_FIRST_LEVEL),
		* in order to account for buggy BIOS which don't export the first two
		* special levels (see below)
		*/
		br->levels = kmalloc((obj->package.count + ACPI_VIDEO_FIRST_LEVEL) *
		sizeof(*br->levels), GFP_KERNEL);
		if (!br->levels) {
		result = -ENOMEM;
		goto out_free;
		@@ -788,7 +847,8 @@ int acpi_video_get_levels(struct acpi_device *device,
		}
		value = (u32) o->integer.value;
		/* Skip duplicate entries */
		if (count > 2 && br->levels[count - 1] == value)
		if (count > ACPI_VIDEO_FIRST_LEVEL
		&& br->levels[count - 1] == value)
		continue;

		br->levels[count] = value;
		@@ -804,26 +864,29 @@ int acpi_video_get_levels(struct acpi_device *device,
		* In this case, the first two elements in _BCL packages
		* are also supported brightness levels that OS should take care of.
		*/
		for (i = 2; i < count; i++) {
		if (br->levels[i] == br->levels[0])
		for (i = ACPI_VIDEO_FIRST_LEVEL; i < count; i++) {
		if (br->levels[i] == br->levels[ACPI_VIDEO_AC_LEVEL])
		level_ac_battery++;
		if (br->levels[i] == br->levels[1])
		if (br->levels[i] == br->levels[ACPI_VIDEO_BATTERY_LEVEL])
		level_ac_battery++;
		}

		if (level_ac_battery < 2) {
		level_ac_battery = 2 - level_ac_battery;
		if (level_ac_battery < ACPI_VIDEO_FIRST_LEVEL) {
		level_ac_battery = ACPI_VIDEO_FIRST_LEVEL - level_ac_battery;
		br->flags._BCL_no_ac_battery_levels = 1;
		for (i = (count - 1 + level_ac_battery); i >= 2; i--)
		for (i = (count - 1 + level_ac_battery);
		i >= ACPI_VIDEO_FIRST_LEVEL; i--)
		br->levels[i] = br->levels[i - level_ac_battery];
		count += level_ac_battery;
		} else if (level_ac_battery > 2)
		} else if (level_ac_battery > ACPI_VIDEO_FIRST_LEVEL)
		ACPI_ERROR((AE_INFO, "Too many duplicates in _BCL package"));

		/* Check if the _BCL package is in a reversed order */
		if (max_level == br->levels[2]) {
		if (max_level == br->levels[ACPI_VIDEO_FIRST_LEVEL]) {
		br->flags._BCL_reversed = 1;
		sort(&br->levels[2], count - 2, sizeof(br->levels[2]),
		sort(&br->levels[ACPI_VIDEO_FIRST_LEVEL],
		count - ACPI_VIDEO_FIRST_LEVEL,
		sizeof(br->levels[ACPI_VIDEO_FIRST_LEVEL]),
		acpi_video_cmp_level, NULL);
		} else if (max_level != br->levels[count - 1])
		ACPI_ERROR((AE_INFO,
		@@ -894,7 +957,7 @@ acpi_video_init_brightness(struct acpi_video_device *device)
		* level_old is invalid (no matter whether it's a level
		* or an index). Set the backlight to max_level in this case.
		*/
		for (i = 2; i < br->count; i++)
		for (i = ACPI_VIDEO_FIRST_LEVEL; i < br->count; i++)
		if (level == br->levels[i])
		break;
		if (i == br->count \|\| !level)
		@@ -906,7 +969,8 @@ acpi_video_init_brightness(struct acpi_video_device *device)
		goto out_free_levels;

		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
		"found %d brightness levels\n", br->count - 2));
		"found %d brightness levels\n",
		br->count - ACPI_VIDEO_FIRST_LEVEL));
		return 0;

		out_free_levels:
		@@ -1297,7 +1361,7 @@ acpi_video_get_next_level(struct acpi_video_device *device,
		max = max_below = 0;
		min = min_above = 255;
		/* Find closest level to level_current */
		for (i = 2; i < device->brightness->count; i++) {
		for (i = ACPI_VIDEO_FIRST_LEVEL; i < device->brightness->count; i++) {
		l = device->brightness->levels[i];
		if (abs(l - level_current) < abs(delta)) {
		delta = l - level_current;
		@@ -1307,7 +1371,7 @@ acpi_video_get_next_level(struct acpi_video_device *device,
		}
		/* Ajust level_current to closest available level */
		level_current += delta;
		for (i = 2; i < device->brightness->count; i++) {
		for (i = ACPI_VIDEO_FIRST_LEVEL; i < device->brightness->count; i++) {
		l = device->brightness->levels[i];
		if (l < min)
		min = l;
		@@ -1680,7 +1744,8 @@ static void acpi_video_dev_register_backlight(struct acpi_video_device *device)

		memset(&props, 0, sizeof(struct backlight_properties));
		props.type = BACKLIGHT_FIRMWARE;
		props.max_brightness = device->brightness->count - 3;
		props.max_brightness =
		device->brightness->count - ACPI_VIDEO_FIRST_LEVEL - 1;
		device->backlight = backlight_device_register(name,
		parent,
		device,

drivers/acpi/battery.c

+20 −2

Original line number	Diff line number	Diff line
		@@ -67,6 +67,7 @@ MODULE_DESCRIPTION("ACPI Battery Driver");
		MODULE_LICENSE("GPL");

		static async_cookie_t async_cookie;
		static bool battery_driver_registered;
		static int battery_bix_broken_package;
		static int battery_notification_delay_ms;
		static unsigned int cache_time = 1000;
		@@ -93,6 +94,11 @@ static const struct acpi_device_id battery_device_ids[] = {

		MODULE_DEVICE_TABLE(acpi, battery_device_ids);

		/* Lists of PMIC ACPI HIDs with an (often better) native battery driver */
		static const char * const acpi_battery_blacklist[] = {
		"INT33F4", /* X-Powers AXP288 PMIC */
		};

		enum {
		ACPI_BATTERY_ALARM_PRESENT,
		ACPI_BATTERY_XINFO_PRESENT,
		@@ -1315,8 +1321,17 @@ static struct acpi_driver acpi_battery_driver = {

		static void __init acpi_battery_init_async(void *unused, async_cookie_t cookie)
		{
		unsigned int i;
		int result;

		for (i = 0; i < ARRAY_SIZE(acpi_battery_blacklist); i++)
		if (acpi_dev_present(acpi_battery_blacklist[i], "1", -1)) {
		pr_info(PREFIX ACPI_BATTERY_DEVICE_NAME
		": found native %s PMIC, not loading\n",
		acpi_battery_blacklist[i]);
		return;
		}

		dmi_check_system(bat_dmi_table);

		#ifdef CONFIG_ACPI_PROCFS_POWER
		@@ -1329,6 +1344,7 @@ static void __init acpi_battery_init_async(void *unused, async_cookie_t cookie)
		if (result < 0)
		acpi_unlock_battery_dir(acpi_battery_dir);
		#endif
		battery_driver_registered = (result == 0);
		}

		static int __init acpi_battery_init(void)
		@@ -1343,8 +1359,10 @@ static int __init acpi_battery_init(void)
		static void __exit acpi_battery_exit(void)
		{
		async_synchronize_cookie(async_cookie + 1);
		if (battery_driver_registered)
		acpi_bus_unregister_driver(&acpi_battery_driver);
		#ifdef CONFIG_ACPI_PROCFS_POWER
		if (acpi_battery_dir)
		acpi_unlock_battery_dir(acpi_battery_dir);
		#endif
		}

drivers/acpi/blacklist.c

+8 −0

Original line number	Diff line number	Diff line
		@@ -188,6 +188,14 @@ static struct dmi_system_id acpi_rev_dmi_table[] __initdata = {
		DMI_MATCH(DMI_PRODUCT_NAME, "Latitude 3350"),
		},
		},
		{
		.callback = dmi_enable_rev_override,
		.ident = "DELL Inspiron 7537",
		.matches = {
		DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
		DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7537"),
		},
		},
		#endif
		{}
		};