Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 4028abf5 authored by Linux Build Service Account's avatar Linux Build Service Account
Browse files

Merge 7e08067e on remote branch 

Change-Id: Ifd57c46a7cf4bb27dfb50facc1c1566db45d5abe
parents c27deae9 7e08067e

kona-camera-sensor-xrfusion.dtsi

0 → 100644
+746 −0
Original line number Diff line number Diff line 
#include <dt-bindings/clock/qcom,camcc-kona.h>



&soc {

	led_flash_rear: qcom,camera-flash0 {

		cell-index = <0>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8150l_flash0 &pm8150l_flash1>;

		torch-source = <&pm8150l_torch0 &pm8150l_torch1>;

		switch-source = <&pm8150l_switch2>;

		status = "disabled";

	};



	led_flash_rear_aux: qcom,camera-flash1 {

		cell-index = <1>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8150l_flash0 &pm8150l_flash1>;

		torch-source = <&pm8150l_torch0 &pm8150l_torch1>;

		switch-source = <&pm8150l_switch2>;

		status = "disabled";

	};



	led_flash_triple_rear: qcom,camera-flash@4 {

		cell-index = <4>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8150l_flash0 &pm8150l_flash1>;

		torch-source = <&pm8150l_torch0 &pm8150l_torch1>;

		switch-source = <&pm8150l_switch2>;

		status = "disabled";

	};



	led_flash_triple_rear_aux: qcom,camera-flash@5 {

		cell-index = <5>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8150l_flash0 &pm8150l_flash1>;

		torch-source = <&pm8150l_torch0 &pm8150l_torch1>;

		switch-source = <&pm8150l_switch2>;

		status = "disabled";

	};



	led_flash_triple_rear_aux2: qcom,camera-flash@6 {

		cell-index = <6>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8150l_flash0 &pm8150l_flash1>;

		torch-source = <&pm8150l_torch0 &pm8150l_torch1>;

		switch-source = <&pm8150l_switch2>;

		status = "disabled";

	};



	qcom,cam-res-mgr {

		compatible = "qcom,cam-res-mgr";

		status = "ok";

		shared-gpios = <1143 1142 1141 1214 1245 1217 1216 1215>;

		pinctrl-names = "cam_res_mgr_default", "cam_res_mgr_suspend";

		pinctrl-0 = <&cam_sensor_6dof_vana_active

				&cam_sensor_6dof_vdig_active

				&cam_sensor_6dof_vio_active

				&cam_sensor_et_vana_active

				&cam_sensor_et_vio_active

				&cam_sensor_rgb_vana_active

				&cam_sensor_rgb_vio_active

				&cam_sensor_rgb_vdig_active>;



		pinctrl-1 = <&cam_sensor_6dof_vana_suspend

				&cam_sensor_6dof_vdig_suspend

				&cam_sensor_6dof_vio_suspend

				&cam_sensor_et_vana_suspend

				&cam_sensor_et_vio_suspend

				&cam_sensor_rgb_vana_suspend

				&cam_sensor_rgb_vio_suspend

				&cam_sensor_rgb_vdig_suspend>;

	};

};



&cam_cci0 {

	actuator_rear: qcom,actuator0 {

		cell-index = <0>;

		compatible = "qcom,actuator";

		cci-master = <0>;

		cam_vaf-supply = <&pm8150a_l7>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2856000>;

		rgltr-max-voltage = <3104000>;

		rgltr-load-current = <100000>;

	};



	actuator_rear_aux: qcom,actuator1 {

		cell-index = <1>;

		compatible = "qcom,actuator";

		cci-master = <1>;

		cam_vaf-supply = <&pm8150a_l7>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2856000>;

		rgltr-max-voltage = <3104000>;

		rgltr-load-current = <100000>;

	};



	actuator_triple_wide: qcom,actuator4 {

		cell-index = <4>;

		compatible = "qcom,actuator";

		cci-master = <0>;

		cam_vaf-supply = <&pm8150a_l7>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2856000>;

		rgltr-max-voltage = <3104000>;

		rgltr-load-current = <100000>;

	};



	actuator_triple_tele: qcom,actuator5 {

		cell-index = <5>;

		compatible = "qcom,actuator";

		cci-master = <1>;

		cam_vaf-supply = <&pm8150a_l7>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2856000>;

		rgltr-max-voltage = <3104000>;

		rgltr-load-current = <100000>;

	};



	eeprom_rear: qcom,eeprom0 {

		cell-index = <0>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l5>;

		cam_vdig-supply = <&pm8009_l1>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&pm8150a_l7>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>;

		rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>;

		rgltr-load-current = <120000 80000 1200000 0 100000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_active_rear>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_suspend_rear>;

		gpios = <&tlmm 94 0>,

			<&tlmm 93 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <0>;

		status = "disabled";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	eeprom_rear_aux: qcom,eeprom1 {

		cell-index = <1>;

		compatible = "qcom,eeprom";

		cam_vdig-supply = <&pm8009_l2>;

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l6>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&pm8150a_l7>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>;

		rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>;

		rgltr-load-current = <120000 80000 1200000 0 100000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_active_rear_aux>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_suspend_rear_aux>;

		gpios = <&tlmm 95 0>,

			<&tlmm 92 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1";

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <1>;

		status = "disabled";

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	eeprom_triple_wide: qcom,eeprom4 {

		cell-index = <4>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l5>;

		cam_vdig-supply = <&pm8009_l1>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&pm8150a_l7>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>;

		rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>;

		rgltr-load-current = <120000 80000 1200000 0 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_active_rear>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_suspend_rear>;

		gpios = <&tlmm 94 0>,

			<&tlmm 93 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <0>;

		status = "disabled";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	eeprom_triple_tele: qcom,eeprom5 {

		cell-index = <5>;

		compatible = "qcom,eeprom";

		cam_vdig-supply = <&pm8009_l2>;

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l6>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&pm8150a_l7>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>;

		rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>;

		rgltr-load-current = <120000 80000 1200000 0 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_active_rear_aux>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_suspend_rear_aux>;

		gpios = <&tlmm 95 0>,

			<&tlmm 92 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1";

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <0>;

		status = "disabled";

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	/* RGB Left (Master) */

	qcom,cam-sensor2 {

		cell-index = <2>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <2>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		eeprom-src = <&eeprom_front>;

		cam_vio-supply = <&pm8009_l7>;

		cam_bob-supply = <&pm8150a_bob>;

		cam_vana-supply = <&pm8009_l6>;

		cam_vdig-supply = <&pm8009_l2>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		pwm-switch;

		rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>;

		rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>;

		rgltr-load-current = <600000 80000 1200000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

			&cam_sensor_active_rgbleft>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

			&cam_sensor_suspend_rgbleft>;

		gpios = <&tlmm 96 0>,

			<&tlmm 78 0>,

			<&tlmm 117 0>,

			<&tlmm 116 0>,

			<&tlmm 115 0>;

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-vio = <3>;

		gpio-vdig = <4>;

		gpio-req-tbl-num = <0 1 2 3 4>;

		gpio-req-tbl-flags = <1 0 0 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VANA2",

					"CAM_VIO2",

					"CAM_VDIG2";

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	/* RGB Right(Slave) */

	qcom,cam-sensor3 {

		cell-index = <3>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <3>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		cam_vio-supply = <&pm8009_l7>;

		cam_bob-supply = <&pm8150a_bob>;

		cam_vana-supply = <&pm8009_l6>;

		cam_vdig-supply = <&pm8009_l2>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

				"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		pwm-switch;

		rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>;

		rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>;

		rgltr-load-current = <600000 80000 1200000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk3_active

				&cam_sensor_active_rgbright>;

		pinctrl-1 = <&cam_sensor_mclk3_suspend

				&cam_sensor_suspend_rgbright>;

		gpios = <&tlmm 97 0>,

			<&tlmm 109 0>,

			<&tlmm 117 0>,

			<&tlmm 116 0>,

			<&tlmm 115 0>;

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-vio = <3>;

		gpio-vdig = <4>;

		gpio-req-tbl-num = <0 1 2 3 4>;

		gpio-req-tbl-flags = <1 0 0 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK3",

					"CAM_RESET3",

					"CAM_VANA3",

					"CAM_VIO3",

					"CAM_VDIG3";

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	/* 6DOF Left (Slave) */

	qcom,cam-sensor4 {

		cell-index = <4>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <4>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		cam_vio-supply = <&pm8009_l7>;

		cam_bob-supply = <&pm8150a_bob>;

		cam_vana-supply = <&pm8009_l6>;

		cam_vdig-supply = <&pm8009_l2>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

				"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		pwm-switch;

		rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>;

		rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>;

		rgltr-load-current = <6000000 80000 1200000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk4_active

			&cam_sensor_active_6dofright>;

		pinctrl-1 = <&cam_sensor_mclk4_suspend

			&cam_sensor_suspend_6dofright>;

		gpios = <&tlmm 98 0>,

			<&tlmm 131 0>,

			<&tlmm 43 0>,

			<&tlmm 41 0>,

			<&tlmm 42 0>;

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-vio = <3>;

		gpio-vdig = <4>;

		gpio-req-tbl-num = <0 1 2 3 4>;

		gpio-req-tbl-flags = <1 0 0 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK4",

					"CAM_RESET4",

					"CAM_VANA4",

					"CAM_VIO4",

					"CAM_VDIG4";

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK4_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	/* 6DOF Left (Master) */

	qcom,cam-sensor5 {

		cell-index = <5>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <5>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		cam_bob-supply = <&pm8150a_bob>;

		cam_vdig-supply = <&pm8009_l2>;

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l6>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		pwm-switch;

		rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>;

		rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>;

		rgltr-load-current = <6000000 80000 1200000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk5_active

			&cam_sensor_active_6dofleft>;

		pinctrl-1 = <&cam_sensor_mclk5_suspend

			&cam_sensor_suspend_6dofleft>;

		gpios = <&tlmm 99 0>,

			<&tlmm 130 0>,

			<&tlmm 43 0>,

			<&tlmm 41 0>,

			<&tlmm 42 0>;

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-vio = <3>;

		gpio-vdig = <4>;

		gpio-req-tbl-num = <0 1 2 3 4>;

		gpio-req-tbl-flags = <1 0 0 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK5",

					"CAM_RESET5",

					"CAM_VANA5",

					"CAM_VIO5",

					"CAM_VDIG5";

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK5_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};

};



&cam_cci1 {

	actuator_triple_uw: qcom,actuator6 {

		cell-index = <6>;

		compatible = "qcom,actuator";

		cci-master = <0>;

		cam_vaf-supply = <&pm8150a_l7>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2856000>;

		rgltr-max-voltage = <3104000>;

		rgltr-load-current = <100000>;

	};



	eeprom_front: qcom,eeprom2 {

		cell-index = <2>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l6>;

		cam_vdig-supply = <&pm8009_l3>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&pm8150a_l7>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>;

		rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>;

		rgltr-load-current = <120000 80000 1200000 0 100000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_active_rst2>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_suspend_rst2>;

		gpios = <&tlmm 96 0>,

			<&tlmm 78 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		sensor-position = <1>;

		sensor-mode = <0>;

		cci-master = <0>;

		status = "disabled";

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	eeprom_triple_uw: qcom,eeprom6 {

		cell-index = <6>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l6>;

		cam_vdig-supply = <&pm8009_l3>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&pm8150a_l7>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>;

		rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>;

		rgltr-load-current = <120000 80000 1200000 0 100000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_active_rst2>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_suspend_rst2>;

		gpios = <&tlmm 96 0>,

			<&tlmm 78 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		sensor-position = <1>;

		sensor-mode = <0>;

		cci-master = <0>;

		status = "disabled";

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	eeprom_tof: qcom,eeprom3 {

		cell-index = <3>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8009_l7>;

		cam_vdig-supply = <&vreg_tof>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3600000 0>;

		rgltr-max-voltage = <0 3600000 0>;

		rgltr-load-current = <180000 120000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk3_active

			&cam_sensor_active_3>;

		pinctrl-1 = <&cam_sensor_mclk3_suspend

			&cam_sensor_suspend_3>;

		gpios = <&tlmm 97 0>,

			<&tlmm 109 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK3",

			"CAM_RESET3";

		sensor-position = <1>;

		sensor-mode = <0>;

		cci-master = <1>;

		status = "disabled";

		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	/* ET LEFT (Master) */

	qcom,cam-sensor0 {

		cell-index = <0>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <0>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		cam_vio-supply = <&pm8009_l7>;

		cam_bob-supply = <&pm8150a_bob>;

		cam_vana-supply = <&pm8009_l6>;

		cam_vdig-supply = <&pm8009_l1>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		pwm-switch;

		rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>;

		rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>;

		rgltr-load-current = <600000 80000 1200000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

			&cam_sensor_active_etleft>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

			&cam_sensor_suspend_etleft>;

		gpios = <&tlmm 94 0>,

			<&tlmm 93 0>,

			<&tlmm 114 0>,

			<&tlmm 145 0>;

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-vio = <3>;

		gpio-req-tbl-num = <0 1 2 3>;

		gpio-req-tbl-flags = <1 0 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VANA0",

					"CAM_VIO0";

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	/* ET RIGHT (Slave) Combo mode */

	qcom,cam-sensor1 {

		cell-index = <1>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <0>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		cam_bob-supply = <&pm8150a_bob>;

		cam_vdig-supply = <&pm8009_l2>;

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l6>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		pwm-switch;

		rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>;

		rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>;

		rgltr-load-current = <600000 80000 1200000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

			&cam_sensor_active_etright>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

			&cam_sensor_suspend_etright>;

		gpios = <&tlmm 95 0>,

			<&tlmm 92 0>,

			<&tlmm 114 0>,

			<&tlmm 145 0>;

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-vio = <3>;

		gpio-req-tbl-num = <0 1 2 3>;

		gpio-req-tbl-flags = <1 0 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VANA1",

					"CAM_VIO1";

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	/* Face Tracking */

	qcom,cam-sensor6 {

		cell-index = <6>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <1>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		cam_bob-supply = <&pm8150a_bob>;

		cam_vdig-supply = <&pm8009_l2>;

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l6>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		pwm-switch;

		rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>;

		rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>;

		rgltr-load-current = <6000000 80000 1200000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk6_active

			&cam_sensor_active_etright>;

		pinctrl-1 = <&cam_sensor_mclk6_suspend

			&cam_sensor_active_etright>;

		gpios = <&tlmm 100 0>,

			<&tlmm 113 0>,

			<&tlmm 51 0>,

			<&tlmm 50 0>,

			<&tlmm 49 0>;

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-vio = <3>;

		gpio-vdig = <4>;

		gpio-req-tbl-num = <0 1 2 3 4>;

		gpio-req-tbl-flags = <1 0 0 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK6",

					"CAM_RESET6",

					"CAM_VANA6",

					"CAM_VIO6",

					"CAM_VDIG6";

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK6_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};

};

lagoon-camera-sensor-qrd.dtsi

0 → 100644
+421 −0

File added.

Preview size limit exceeded, changes collapsed.

scuba-camera-sensor-idp.dtsi

0 → 100644
+313 −0

File added.

Preview size limit exceeded, changes collapsed.

scuba-camera.dtsi

0 → 100644
+762 −0

File added.

Preview size limit exceeded, changes collapsed.