Loading kona-camera-sensor-xrfusion.dtsi 0 → 100644 +746 −0 Original line number Diff line number Diff line #include <dt-bindings/clock/qcom,camcc-kona.h> &soc { led_flash_rear: qcom,camera-flash0 { cell-index = <0>; compatible = "qcom,camera-flash"; flash-source = <&pm8150l_flash0 &pm8150l_flash1>; torch-source = <&pm8150l_torch0 &pm8150l_torch1>; switch-source = <&pm8150l_switch2>; status = "disabled"; }; led_flash_rear_aux: qcom,camera-flash1 { cell-index = <1>; compatible = "qcom,camera-flash"; flash-source = <&pm8150l_flash0 &pm8150l_flash1>; torch-source = <&pm8150l_torch0 &pm8150l_torch1>; switch-source = <&pm8150l_switch2>; status = "disabled"; }; led_flash_triple_rear: qcom,camera-flash@4 { cell-index = <4>; compatible = "qcom,camera-flash"; flash-source = <&pm8150l_flash0 &pm8150l_flash1>; torch-source = <&pm8150l_torch0 &pm8150l_torch1>; switch-source = <&pm8150l_switch2>; status = "disabled"; }; led_flash_triple_rear_aux: qcom,camera-flash@5 { cell-index = <5>; compatible = "qcom,camera-flash"; flash-source = <&pm8150l_flash0 &pm8150l_flash1>; torch-source = <&pm8150l_torch0 &pm8150l_torch1>; switch-source = <&pm8150l_switch2>; status = "disabled"; }; led_flash_triple_rear_aux2: qcom,camera-flash@6 { cell-index = <6>; compatible = "qcom,camera-flash"; flash-source = <&pm8150l_flash0 &pm8150l_flash1>; torch-source = <&pm8150l_torch0 &pm8150l_torch1>; switch-source = <&pm8150l_switch2>; status = "disabled"; }; qcom,cam-res-mgr { compatible = "qcom,cam-res-mgr"; status = "ok"; shared-gpios = <1143 1142 1141 1214 1245 1217 1216 1215>; pinctrl-names = "cam_res_mgr_default", "cam_res_mgr_suspend"; pinctrl-0 = <&cam_sensor_6dof_vana_active &cam_sensor_6dof_vdig_active &cam_sensor_6dof_vio_active &cam_sensor_et_vana_active &cam_sensor_et_vio_active &cam_sensor_rgb_vana_active &cam_sensor_rgb_vio_active &cam_sensor_rgb_vdig_active>; pinctrl-1 = <&cam_sensor_6dof_vana_suspend &cam_sensor_6dof_vdig_suspend &cam_sensor_6dof_vio_suspend &cam_sensor_et_vana_suspend &cam_sensor_et_vio_suspend &cam_sensor_rgb_vana_suspend &cam_sensor_rgb_vio_suspend &cam_sensor_rgb_vdig_suspend>; }; }; &cam_cci0 { actuator_rear: qcom,actuator0 { cell-index = <0>; compatible = "qcom,actuator"; cci-master = <0>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2856000>; rgltr-max-voltage = <3104000>; rgltr-load-current = <100000>; }; actuator_rear_aux: qcom,actuator1 { cell-index = <1>; compatible = "qcom,actuator"; cci-master = <1>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2856000>; rgltr-max-voltage = <3104000>; rgltr-load-current = <100000>; }; actuator_triple_wide: qcom,actuator4 { cell-index = <4>; compatible = "qcom,actuator"; cci-master = <0>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2856000>; rgltr-max-voltage = <3104000>; rgltr-load-current = <100000>; }; actuator_triple_tele: qcom,actuator5 { cell-index = <5>; compatible = "qcom,actuator"; cci-master = <1>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2856000>; rgltr-max-voltage = <3104000>; rgltr-load-current = <100000>; }; eeprom_rear: qcom,eeprom0 { cell-index = <0>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l5>; cam_vdig-supply = <&pm8009_l1>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>; rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>; rgltr-load-current = <120000 80000 1200000 0 100000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_active_rear>; pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_suspend_rear>; gpios = <&tlmm 94 0>, <&tlmm 93 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET0"; sensor-position = <0>; sensor-mode = <0>; cci-master = <0>; status = "disabled"; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_rear_aux: qcom,eeprom1 { cell-index = <1>; compatible = "qcom,eeprom"; cam_vdig-supply = <&pm8009_l2>; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l6>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>; rgltr-load-current = <120000 80000 1200000 0 100000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_active_rear_aux>; pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_suspend_rear_aux>; gpios = <&tlmm 95 0>, <&tlmm 92 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET1"; sensor-position = <0>; sensor-mode = <0>; cci-master = <1>; status = "disabled"; clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_triple_wide: qcom,eeprom4 { cell-index = <4>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l5>; cam_vdig-supply = <&pm8009_l1>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>; rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>; rgltr-load-current = <120000 80000 1200000 0 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_active_rear>; pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_suspend_rear>; gpios = <&tlmm 94 0>, <&tlmm 93 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET0"; sensor-position = <0>; sensor-mode = <0>; cci-master = <0>; status = "disabled"; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_triple_tele: qcom,eeprom5 { cell-index = <5>; compatible = "qcom,eeprom"; cam_vdig-supply = <&pm8009_l2>; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l6>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>; rgltr-load-current = <120000 80000 1200000 0 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_active_rear_aux>; pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_suspend_rear_aux>; gpios = <&tlmm 95 0>, <&tlmm 92 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET1"; sensor-position = <0>; sensor-mode = <0>; cci-master = <0>; status = "disabled"; clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; /* RGB Left (Master) */ qcom,cam-sensor2 { cell-index = <2>; compatible = "qcom,cam-sensor"; csiphy-sd-index = <2>; sensor-position-roll = <90>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; eeprom-src = <&eeprom_front>; cam_vio-supply = <&pm8009_l7>; cam_bob-supply = <&pm8150a_bob>; cam_vana-supply = <&pm8009_l6>; cam_vdig-supply = <&pm8009_l2>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_bob"; rgltr-cntrl-support; pwm-switch; rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; rgltr-load-current = <600000 80000 1200000 0 2000000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_active_rgbleft>; pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_suspend_rgbleft>; gpios = <&tlmm 96 0>, <&tlmm 78 0>, <&tlmm 117 0>, <&tlmm 116 0>, <&tlmm 115 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-vio = <3>; gpio-vdig = <4>; gpio-req-tbl-num = <0 1 2 3 4>; gpio-req-tbl-flags = <1 0 0 0 0>; gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET2", "CAM_VANA2", "CAM_VIO2", "CAM_VDIG2"; sensor-mode = <0>; cci-master = <0>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; /* RGB Right(Slave) */ qcom,cam-sensor3 { cell-index = <3>; compatible = "qcom,cam-sensor"; csiphy-sd-index = <3>; sensor-position-roll = <90>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; cam_vio-supply = <&pm8009_l7>; cam_bob-supply = <&pm8150a_bob>; cam_vana-supply = <&pm8009_l6>; cam_vdig-supply = <&pm8009_l2>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_bob"; rgltr-cntrl-support; pwm-switch; rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; rgltr-load-current = <600000 80000 1200000 0 2000000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk3_active &cam_sensor_active_rgbright>; pinctrl-1 = <&cam_sensor_mclk3_suspend &cam_sensor_suspend_rgbright>; gpios = <&tlmm 97 0>, <&tlmm 109 0>, <&tlmm 117 0>, <&tlmm 116 0>, <&tlmm 115 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-vio = <3>; gpio-vdig = <4>; gpio-req-tbl-num = <0 1 2 3 4>; gpio-req-tbl-flags = <1 0 0 0 0>; gpio-req-tbl-label = "CAMIF_MCLK3", "CAM_RESET3", "CAM_VANA3", "CAM_VIO3", "CAM_VDIG3"; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; /* 6DOF Left (Slave) */ qcom,cam-sensor4 { cell-index = <4>; compatible = "qcom,cam-sensor"; csiphy-sd-index = <4>; sensor-position-roll = <90>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; cam_vio-supply = <&pm8009_l7>; cam_bob-supply = <&pm8150a_bob>; cam_vana-supply = <&pm8009_l6>; cam_vdig-supply = <&pm8009_l2>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_bob"; rgltr-cntrl-support; pwm-switch; rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; rgltr-load-current = <6000000 80000 1200000 0 2000000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk4_active &cam_sensor_active_6dofright>; pinctrl-1 = <&cam_sensor_mclk4_suspend &cam_sensor_suspend_6dofright>; gpios = <&tlmm 98 0>, <&tlmm 131 0>, <&tlmm 43 0>, <&tlmm 41 0>, <&tlmm 42 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-vio = <3>; gpio-vdig = <4>; gpio-req-tbl-num = <0 1 2 3 4>; gpio-req-tbl-flags = <1 0 0 0 0>; gpio-req-tbl-label = "CAMIF_MCLK4", "CAM_RESET4", "CAM_VANA4", "CAM_VIO4", "CAM_VDIG4"; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK4_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; /* 6DOF Left (Master) */ qcom,cam-sensor5 { cell-index = <5>; compatible = "qcom,cam-sensor"; csiphy-sd-index = <5>; sensor-position-roll = <90>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; cam_bob-supply = <&pm8150a_bob>; cam_vdig-supply = <&pm8009_l2>; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l6>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_bob"; rgltr-cntrl-support; pwm-switch; rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; rgltr-load-current = <6000000 80000 1200000 0 2000000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk5_active &cam_sensor_active_6dofleft>; pinctrl-1 = <&cam_sensor_mclk5_suspend &cam_sensor_suspend_6dofleft>; gpios = <&tlmm 99 0>, <&tlmm 130 0>, <&tlmm 43 0>, <&tlmm 41 0>, <&tlmm 42 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-vio = <3>; gpio-vdig = <4>; gpio-req-tbl-num = <0 1 2 3 4>; gpio-req-tbl-flags = <1 0 0 0 0>; gpio-req-tbl-label = "CAMIF_MCLK5", "CAM_RESET5", "CAM_VANA5", "CAM_VIO5", "CAM_VDIG5"; sensor-mode = <0>; cci-master = <0>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK5_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; }; &cam_cci1 { actuator_triple_uw: qcom,actuator6 { cell-index = <6>; compatible = "qcom,actuator"; cci-master = <0>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2856000>; rgltr-max-voltage = <3104000>; rgltr-load-current = <100000>; }; eeprom_front: qcom,eeprom2 { cell-index = <2>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l6>; cam_vdig-supply = <&pm8009_l3>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>; rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>; rgltr-load-current = <120000 80000 1200000 0 100000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_active_rst2>; pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_suspend_rst2>; gpios = <&tlmm 96 0>, <&tlmm 78 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET2"; sensor-position = <1>; sensor-mode = <0>; cci-master = <0>; status = "disabled"; clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_triple_uw: qcom,eeprom6 { cell-index = <6>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l6>; cam_vdig-supply = <&pm8009_l3>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>; rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>; rgltr-load-current = <120000 80000 1200000 0 100000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_active_rst2>; pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_suspend_rst2>; gpios = <&tlmm 96 0>, <&tlmm 78 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET2"; sensor-position = <1>; sensor-mode = <0>; cci-master = <0>; status = "disabled"; clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_tof: qcom,eeprom3 { cell-index = <3>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8009_l7>; cam_vdig-supply = <&vreg_tof>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vdig", "cam_clk"; rgltr-cntrl-support; rgltr-min-voltage = <0 3600000 0>; rgltr-max-voltage = <0 3600000 0>; rgltr-load-current = <180000 120000 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk3_active &cam_sensor_active_3>; pinctrl-1 = <&cam_sensor_mclk3_suspend &cam_sensor_suspend_3>; gpios = <&tlmm 97 0>, <&tlmm 109 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK3", "CAM_RESET3"; sensor-position = <1>; sensor-mode = <0>; cci-master = <1>; status = "disabled"; clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; /* ET LEFT (Master) */ qcom,cam-sensor0 { cell-index = <0>; compatible = "qcom,cam-sensor"; csiphy-sd-index = <0>; sensor-position-roll = <90>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; cam_vio-supply = <&pm8009_l7>; cam_bob-supply = <&pm8150a_bob>; cam_vana-supply = <&pm8009_l6>; cam_vdig-supply = <&pm8009_l1>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_bob"; rgltr-cntrl-support; pwm-switch; rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>; rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>; rgltr-load-current = <600000 80000 1200000 0 2000000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_active_etleft>; pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_suspend_etleft>; gpios = <&tlmm 94 0>, <&tlmm 93 0>, <&tlmm 114 0>, <&tlmm 145 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-vio = <3>; gpio-req-tbl-num = <0 1 2 3>; gpio-req-tbl-flags = <1 0 0 0>; gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET0", "CAM_VANA0", "CAM_VIO0"; sensor-mode = <0>; cci-master = <0>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; /* ET RIGHT (Slave) Combo mode */ qcom,cam-sensor1 { cell-index = <1>; compatible = "qcom,cam-sensor"; csiphy-sd-index = <0>; sensor-position-roll = <90>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; cam_bob-supply = <&pm8150a_bob>; cam_vdig-supply = <&pm8009_l2>; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l6>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_bob"; rgltr-cntrl-support; pwm-switch; rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; rgltr-load-current = <600000 80000 1200000 0 2000000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_active_etright>; pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_suspend_etright>; gpios = <&tlmm 95 0>, <&tlmm 92 0>, <&tlmm 114 0>, <&tlmm 145 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-vio = <3>; gpio-req-tbl-num = <0 1 2 3>; gpio-req-tbl-flags = <1 0 0 0>; gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET1", "CAM_VANA1", "CAM_VIO1"; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK1_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; /* Face Tracking */ qcom,cam-sensor6 { cell-index = <6>; compatible = "qcom,cam-sensor"; csiphy-sd-index = <1>; sensor-position-roll = <90>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; cam_bob-supply = <&pm8150a_bob>; cam_vdig-supply = <&pm8009_l2>; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l6>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_bob"; rgltr-cntrl-support; pwm-switch; rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; rgltr-load-current = <6000000 80000 1200000 0 2000000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk6_active &cam_sensor_active_etright>; pinctrl-1 = <&cam_sensor_mclk6_suspend &cam_sensor_active_etright>; gpios = <&tlmm 100 0>, <&tlmm 113 0>, <&tlmm 51 0>, <&tlmm 50 0>, <&tlmm 49 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-vio = <3>; gpio-vdig = <4>; gpio-req-tbl-num = <0 1 2 3 4>; gpio-req-tbl-flags = <1 0 0 0 0>; gpio-req-tbl-label = "CAMIF_MCLK6", "CAM_RESET6", "CAM_VANA6", "CAM_VIO6", "CAM_VDIG6"; sensor-mode = <0>; cci-master = <0>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK6_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; }; Loading
kona-camera-sensor-xrfusion.dtsi 0 → 100644 +746 −0 Original line number Diff line number Diff line #include <dt-bindings/clock/qcom,camcc-kona.h> &soc { led_flash_rear: qcom,camera-flash0 { cell-index = <0>; compatible = "qcom,camera-flash"; flash-source = <&pm8150l_flash0 &pm8150l_flash1>; torch-source = <&pm8150l_torch0 &pm8150l_torch1>; switch-source = <&pm8150l_switch2>; status = "disabled"; }; led_flash_rear_aux: qcom,camera-flash1 { cell-index = <1>; compatible = "qcom,camera-flash"; flash-source = <&pm8150l_flash0 &pm8150l_flash1>; torch-source = <&pm8150l_torch0 &pm8150l_torch1>; switch-source = <&pm8150l_switch2>; status = "disabled"; }; led_flash_triple_rear: qcom,camera-flash@4 { cell-index = <4>; compatible = "qcom,camera-flash"; flash-source = <&pm8150l_flash0 &pm8150l_flash1>; torch-source = <&pm8150l_torch0 &pm8150l_torch1>; switch-source = <&pm8150l_switch2>; status = "disabled"; }; led_flash_triple_rear_aux: qcom,camera-flash@5 { cell-index = <5>; compatible = "qcom,camera-flash"; flash-source = <&pm8150l_flash0 &pm8150l_flash1>; torch-source = <&pm8150l_torch0 &pm8150l_torch1>; switch-source = <&pm8150l_switch2>; status = "disabled"; }; led_flash_triple_rear_aux2: qcom,camera-flash@6 { cell-index = <6>; compatible = "qcom,camera-flash"; flash-source = <&pm8150l_flash0 &pm8150l_flash1>; torch-source = <&pm8150l_torch0 &pm8150l_torch1>; switch-source = <&pm8150l_switch2>; status = "disabled"; }; qcom,cam-res-mgr { compatible = "qcom,cam-res-mgr"; status = "ok"; shared-gpios = <1143 1142 1141 1214 1245 1217 1216 1215>; pinctrl-names = "cam_res_mgr_default", "cam_res_mgr_suspend"; pinctrl-0 = <&cam_sensor_6dof_vana_active &cam_sensor_6dof_vdig_active &cam_sensor_6dof_vio_active &cam_sensor_et_vana_active &cam_sensor_et_vio_active &cam_sensor_rgb_vana_active &cam_sensor_rgb_vio_active &cam_sensor_rgb_vdig_active>; pinctrl-1 = <&cam_sensor_6dof_vana_suspend &cam_sensor_6dof_vdig_suspend &cam_sensor_6dof_vio_suspend &cam_sensor_et_vana_suspend &cam_sensor_et_vio_suspend &cam_sensor_rgb_vana_suspend &cam_sensor_rgb_vio_suspend &cam_sensor_rgb_vdig_suspend>; }; }; &cam_cci0 { actuator_rear: qcom,actuator0 { cell-index = <0>; compatible = "qcom,actuator"; cci-master = <0>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2856000>; rgltr-max-voltage = <3104000>; rgltr-load-current = <100000>; }; actuator_rear_aux: qcom,actuator1 { cell-index = <1>; compatible = "qcom,actuator"; cci-master = <1>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2856000>; rgltr-max-voltage = <3104000>; rgltr-load-current = <100000>; }; actuator_triple_wide: qcom,actuator4 { cell-index = <4>; compatible = "qcom,actuator"; cci-master = <0>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2856000>; rgltr-max-voltage = <3104000>; rgltr-load-current = <100000>; }; actuator_triple_tele: qcom,actuator5 { cell-index = <5>; compatible = "qcom,actuator"; cci-master = <1>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2856000>; rgltr-max-voltage = <3104000>; rgltr-load-current = <100000>; }; eeprom_rear: qcom,eeprom0 { cell-index = <0>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l5>; cam_vdig-supply = <&pm8009_l1>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>; rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>; rgltr-load-current = <120000 80000 1200000 0 100000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_active_rear>; pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_suspend_rear>; gpios = <&tlmm 94 0>, <&tlmm 93 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET0"; sensor-position = <0>; sensor-mode = <0>; cci-master = <0>; status = "disabled"; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_rear_aux: qcom,eeprom1 { cell-index = <1>; compatible = "qcom,eeprom"; cam_vdig-supply = <&pm8009_l2>; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l6>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>; rgltr-load-current = <120000 80000 1200000 0 100000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_active_rear_aux>; pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_suspend_rear_aux>; gpios = <&tlmm 95 0>, <&tlmm 92 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET1"; sensor-position = <0>; sensor-mode = <0>; cci-master = <1>; status = "disabled"; clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_triple_wide: qcom,eeprom4 { cell-index = <4>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l5>; cam_vdig-supply = <&pm8009_l1>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>; rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>; rgltr-load-current = <120000 80000 1200000 0 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_active_rear>; pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_suspend_rear>; gpios = <&tlmm 94 0>, <&tlmm 93 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET0"; sensor-position = <0>; sensor-mode = <0>; cci-master = <0>; status = "disabled"; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_triple_tele: qcom,eeprom5 { cell-index = <5>; compatible = "qcom,eeprom"; cam_vdig-supply = <&pm8009_l2>; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l6>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>; rgltr-load-current = <120000 80000 1200000 0 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_active_rear_aux>; pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_suspend_rear_aux>; gpios = <&tlmm 95 0>, <&tlmm 92 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET1"; sensor-position = <0>; sensor-mode = <0>; cci-master = <0>; status = "disabled"; clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; /* RGB Left (Master) */ qcom,cam-sensor2 { cell-index = <2>; compatible = "qcom,cam-sensor"; csiphy-sd-index = <2>; sensor-position-roll = <90>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; eeprom-src = <&eeprom_front>; cam_vio-supply = <&pm8009_l7>; cam_bob-supply = <&pm8150a_bob>; cam_vana-supply = <&pm8009_l6>; cam_vdig-supply = <&pm8009_l2>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_bob"; rgltr-cntrl-support; pwm-switch; rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; rgltr-load-current = <600000 80000 1200000 0 2000000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_active_rgbleft>; pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_suspend_rgbleft>; gpios = <&tlmm 96 0>, <&tlmm 78 0>, <&tlmm 117 0>, <&tlmm 116 0>, <&tlmm 115 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-vio = <3>; gpio-vdig = <4>; gpio-req-tbl-num = <0 1 2 3 4>; gpio-req-tbl-flags = <1 0 0 0 0>; gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET2", "CAM_VANA2", "CAM_VIO2", "CAM_VDIG2"; sensor-mode = <0>; cci-master = <0>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; /* RGB Right(Slave) */ qcom,cam-sensor3 { cell-index = <3>; compatible = "qcom,cam-sensor"; csiphy-sd-index = <3>; sensor-position-roll = <90>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; cam_vio-supply = <&pm8009_l7>; cam_bob-supply = <&pm8150a_bob>; cam_vana-supply = <&pm8009_l6>; cam_vdig-supply = <&pm8009_l2>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_bob"; rgltr-cntrl-support; pwm-switch; rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; rgltr-load-current = <600000 80000 1200000 0 2000000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk3_active &cam_sensor_active_rgbright>; pinctrl-1 = <&cam_sensor_mclk3_suspend &cam_sensor_suspend_rgbright>; gpios = <&tlmm 97 0>, <&tlmm 109 0>, <&tlmm 117 0>, <&tlmm 116 0>, <&tlmm 115 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-vio = <3>; gpio-vdig = <4>; gpio-req-tbl-num = <0 1 2 3 4>; gpio-req-tbl-flags = <1 0 0 0 0>; gpio-req-tbl-label = "CAMIF_MCLK3", "CAM_RESET3", "CAM_VANA3", "CAM_VIO3", "CAM_VDIG3"; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; /* 6DOF Left (Slave) */ qcom,cam-sensor4 { cell-index = <4>; compatible = "qcom,cam-sensor"; csiphy-sd-index = <4>; sensor-position-roll = <90>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; cam_vio-supply = <&pm8009_l7>; cam_bob-supply = <&pm8150a_bob>; cam_vana-supply = <&pm8009_l6>; cam_vdig-supply = <&pm8009_l2>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_bob"; rgltr-cntrl-support; pwm-switch; rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; rgltr-load-current = <6000000 80000 1200000 0 2000000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk4_active &cam_sensor_active_6dofright>; pinctrl-1 = <&cam_sensor_mclk4_suspend &cam_sensor_suspend_6dofright>; gpios = <&tlmm 98 0>, <&tlmm 131 0>, <&tlmm 43 0>, <&tlmm 41 0>, <&tlmm 42 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-vio = <3>; gpio-vdig = <4>; gpio-req-tbl-num = <0 1 2 3 4>; gpio-req-tbl-flags = <1 0 0 0 0>; gpio-req-tbl-label = "CAMIF_MCLK4", "CAM_RESET4", "CAM_VANA4", "CAM_VIO4", "CAM_VDIG4"; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK4_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; /* 6DOF Left (Master) */ qcom,cam-sensor5 { cell-index = <5>; compatible = "qcom,cam-sensor"; csiphy-sd-index = <5>; sensor-position-roll = <90>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; cam_bob-supply = <&pm8150a_bob>; cam_vdig-supply = <&pm8009_l2>; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l6>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_bob"; rgltr-cntrl-support; pwm-switch; rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; rgltr-load-current = <6000000 80000 1200000 0 2000000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk5_active &cam_sensor_active_6dofleft>; pinctrl-1 = <&cam_sensor_mclk5_suspend &cam_sensor_suspend_6dofleft>; gpios = <&tlmm 99 0>, <&tlmm 130 0>, <&tlmm 43 0>, <&tlmm 41 0>, <&tlmm 42 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-vio = <3>; gpio-vdig = <4>; gpio-req-tbl-num = <0 1 2 3 4>; gpio-req-tbl-flags = <1 0 0 0 0>; gpio-req-tbl-label = "CAMIF_MCLK5", "CAM_RESET5", "CAM_VANA5", "CAM_VIO5", "CAM_VDIG5"; sensor-mode = <0>; cci-master = <0>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK5_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; }; &cam_cci1 { actuator_triple_uw: qcom,actuator6 { cell-index = <6>; compatible = "qcom,actuator"; cci-master = <0>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2856000>; rgltr-max-voltage = <3104000>; rgltr-load-current = <100000>; }; eeprom_front: qcom,eeprom2 { cell-index = <2>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l6>; cam_vdig-supply = <&pm8009_l3>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>; rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>; rgltr-load-current = <120000 80000 1200000 0 100000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_active_rst2>; pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_suspend_rst2>; gpios = <&tlmm 96 0>, <&tlmm 78 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET2"; sensor-position = <1>; sensor-mode = <0>; cci-master = <0>; status = "disabled"; clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_triple_uw: qcom,eeprom6 { cell-index = <6>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l6>; cam_vdig-supply = <&pm8009_l3>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&pm8150a_l7>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>; rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>; rgltr-load-current = <120000 80000 1200000 0 100000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_active_rst2>; pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_suspend_rst2>; gpios = <&tlmm 96 0>, <&tlmm 78 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET2"; sensor-position = <1>; sensor-mode = <0>; cci-master = <0>; status = "disabled"; clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_tof: qcom,eeprom3 { cell-index = <3>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8009_l7>; cam_vdig-supply = <&vreg_tof>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vdig", "cam_clk"; rgltr-cntrl-support; rgltr-min-voltage = <0 3600000 0>; rgltr-max-voltage = <0 3600000 0>; rgltr-load-current = <180000 120000 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk3_active &cam_sensor_active_3>; pinctrl-1 = <&cam_sensor_mclk3_suspend &cam_sensor_suspend_3>; gpios = <&tlmm 97 0>, <&tlmm 109 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK3", "CAM_RESET3"; sensor-position = <1>; sensor-mode = <0>; cci-master = <1>; status = "disabled"; clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; /* ET LEFT (Master) */ qcom,cam-sensor0 { cell-index = <0>; compatible = "qcom,cam-sensor"; csiphy-sd-index = <0>; sensor-position-roll = <90>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; cam_vio-supply = <&pm8009_l7>; cam_bob-supply = <&pm8150a_bob>; cam_vana-supply = <&pm8009_l6>; cam_vdig-supply = <&pm8009_l1>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_bob"; rgltr-cntrl-support; pwm-switch; rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>; rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>; rgltr-load-current = <600000 80000 1200000 0 2000000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_active_etleft>; pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_suspend_etleft>; gpios = <&tlmm 94 0>, <&tlmm 93 0>, <&tlmm 114 0>, <&tlmm 145 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-vio = <3>; gpio-req-tbl-num = <0 1 2 3>; gpio-req-tbl-flags = <1 0 0 0>; gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET0", "CAM_VANA0", "CAM_VIO0"; sensor-mode = <0>; cci-master = <0>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; /* ET RIGHT (Slave) Combo mode */ qcom,cam-sensor1 { cell-index = <1>; compatible = "qcom,cam-sensor"; csiphy-sd-index = <0>; sensor-position-roll = <90>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; cam_bob-supply = <&pm8150a_bob>; cam_vdig-supply = <&pm8009_l2>; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l6>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_bob"; rgltr-cntrl-support; pwm-switch; rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; rgltr-load-current = <600000 80000 1200000 0 2000000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_active_etright>; pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_suspend_etright>; gpios = <&tlmm 95 0>, <&tlmm 92 0>, <&tlmm 114 0>, <&tlmm 145 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-vio = <3>; gpio-req-tbl-num = <0 1 2 3>; gpio-req-tbl-flags = <1 0 0 0>; gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET1", "CAM_VANA1", "CAM_VIO1"; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK1_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; /* Face Tracking */ qcom,cam-sensor6 { cell-index = <6>; compatible = "qcom,cam-sensor"; csiphy-sd-index = <1>; sensor-position-roll = <90>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; cam_bob-supply = <&pm8150a_bob>; cam_vdig-supply = <&pm8009_l2>; cam_vio-supply = <&pm8009_l7>; cam_vana-supply = <&pm8009_l6>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_bob"; rgltr-cntrl-support; pwm-switch; rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; rgltr-load-current = <6000000 80000 1200000 0 2000000>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk6_active &cam_sensor_active_etright>; pinctrl-1 = <&cam_sensor_mclk6_suspend &cam_sensor_active_etright>; gpios = <&tlmm 100 0>, <&tlmm 113 0>, <&tlmm 51 0>, <&tlmm 50 0>, <&tlmm 49 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-vio = <3>; gpio-vdig = <4>; gpio-req-tbl-num = <0 1 2 3 4>; gpio-req-tbl-flags = <1 0 0 0 0>; gpio-req-tbl-label = "CAMIF_MCLK6", "CAM_RESET6", "CAM_VANA6", "CAM_VIO6", "CAM_VDIG6"; sensor-mode = <0>; cci-master = <0>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK6_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; };
