Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 101c4314 authored by David S. Miller's avatar David S. Miller
Browse files

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 



Conflicts:
	drivers/net/ethernet/broadcom/genet/bcmgenet.c
	net/core/sock.c

Conflicts were overlapping changes in bcmgenet and the
lockdep handling of sockets.

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 9c79ddaa 95422dec

Documentation/admin-guide/kernel-parameters.txt

+9 −0
Original line number Diff line number Diff line
@@ -653,6 +653,9 @@ 
	cpuidle.off=1	[CPU_IDLE]

			disable the cpuidle sub-system



	cpufreq.off=1	[CPU_FREQ]

			disable the cpufreq sub-system



	cpu_init_udelay=N

			[X86] Delay for N microsec between assert and de-assert

			of APIC INIT to start processors.  This delay occurs
@@ -1183,6 +1186,12 @@ 
			functions that can be changed at run time by the

			set_graph_notrace file in the debugfs tracing directory.



	ftrace_graph_max_depth=<uint>

			[FTRACE] Used with the function graph tracer. This is

			the max depth it will trace into a function. This value

			can be changed at run time by the max_graph_depth file

			in the tracefs tracing directory. default: 0 (no limit)



	gamecon.map[2|3]=

			[HW,JOY] Multisystem joystick and NES/SNES/PSX pad

			support via parallel port (up to 5 devices per port)

Documentation/arm64/silicon-errata.txt

+1 −0
Original line number Diff line number Diff line
@@ -68,3 +68,4 @@ stable kernels. 
|                |                 |                 |                             |

| Qualcomm Tech. | Falkor v1       | E1003           | QCOM_FALKOR_ERRATUM_1003    |

| Qualcomm Tech. | Falkor v1       | E1009           | QCOM_FALKOR_ERRATUM_1009    |

| Qualcomm Tech. | QDF2400 ITS     | E0065           | QCOM_QDF2400_ERRATUM_0065   |

Documentation/cgroup-v2.txt

+6 −5
Original line number Diff line number Diff line
@@ -1142,8 +1142,8 @@ used by the kernel. 


  pids.max



 A read-write single value file which exists on non-root cgroups.  The

 default is "max".

	A read-write single value file which exists on non-root

	cgroups.  The default is "max".



	Hard limit of number of processes.
@@ -1151,7 +1151,8 @@ used by the kernel. 


	A read-only single value file which exists on all cgroups.



 The number of processes currently in the cgroup and its descendants.

	The number of processes currently in the cgroup and its

	descendants.



Organisational operations are not blocked by cgroup policies, so it is

possible to have pids.current > pids.max.  This can be done by either

Documentation/dev-tools/kcov.rst

+1 −1
Original line number Diff line number Diff line
@@ -10,7 +10,7 @@ Note that kcov does not aim to collect as much coverage as possible. It aims 
to collect more or less stable coverage that is function of syscall inputs.

To achieve this goal it does not collect coverage in soft/hard interrupts

and instrumentation of some inherently non-deterministic parts of kernel is

disbled (e.g. scheduler, locking).

disabled (e.g. scheduler, locking).



Usage

-----

Documentation/devicetree/bindings/powerpc/4xx/emac.txt

+60 −2
Original line number Diff line number Diff line
@@ -71,6 +71,9 @@ 
			  For Axon it can be absent, though my current driver

			  doesn't handle phy-address yet so for now, keep

			  0x00ffffff in it.

    - phy-handle	: Used to describe configurations where a external PHY

			  is used. Please refer to:

			  Documentation/devicetree/bindings/net/ethernet.txt

    - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec

			  operations (if absent the value is the same as

			  rx-fifo-size).  For Axon, either absent or 2048.
@@ -81,8 +84,22 @@ 
			  offload, phandle of the TAH device node.

    - tah-channel       : 1 cell, optional. If appropriate, channel used on the

			  TAH engine.

    - fixed-link	: Fixed-link subnode describing a link to a non-MDIO

			  managed entity. See

			  Documentation/devicetree/bindings/net/fixed-link.txt

			  for details.

    - mdio subnode	: When the EMAC has a phy connected to its local

			  mdio, which us supported by the kernel's network

			  PHY library in drivers/net/phy, there must be device

			  tree subnode with the following required properties:

				- #address-cells: Must be <1>.

				- #size-cells: Must be <0>.



    Example:

			  For PHY definitions: Please refer to

			  Documentation/devicetree/bindings/net/phy.txt and

			  Documentation/devicetree/bindings/net/ethernet.txt



    Examples:



	EMAC0: ethernet@40000800 {

		device_type = "network";
@@ -104,6 +121,48 @@ 
		zmii-channel = <0>;

	};



	EMAC1: ethernet@ef600c00 {

		device_type = "network";

		compatible = "ibm,emac-apm821xx", "ibm,emac4sync";

		interrupt-parent = <&EMAC1>;

		interrupts = <0 1>;

		#interrupt-cells = <1>;

		#address-cells = <0>;

		#size-cells = <0>;

		interrupt-map = <0 &UIC2 0x10 IRQ_TYPE_LEVEL_HIGH /* Status */

				 1 &UIC2 0x14 IRQ_TYPE_LEVEL_HIGH /* Wake */>;

		reg = <0xef600c00 0x000000c4>;

		local-mac-address = [000000000000]; /* Filled in by U-Boot */

		mal-device = <&MAL0>;

		mal-tx-channel = <0>;

		mal-rx-channel = <0>;

		cell-index = <0>;

		max-frame-size = <9000>;

		rx-fifo-size = <16384>;

		tx-fifo-size = <2048>;

		fifo-entry-size = <10>;

		phy-mode = "rgmii";

		phy-handle = <&phy0>;

		phy-map = <0x00000000>;

		rgmii-device = <&RGMII0>;

		rgmii-channel = <0>;

		tah-device = <&TAH0>;

		tah-channel = <0>;

		has-inverted-stacr-oc;

		has-new-stacr-staopc;



	        mdio {

			#address-cells = <1>;

			#size-cells = <0>;



			phy0: ethernet-phy@0 {

				compatible = "ethernet-phy-ieee802.3-c22";

				reg = <0>;

			};

		};

	};





      ii) McMAL node



    Required properties:
@@ -145,4 +204,3 @@ 
    - revision           : as provided by the RGMII new version register if

			   available.

			   For Axon: 0x0000012a